User is receiving error when creating receipts in iProcurement

User is getting following error when trying to create a receipt in iProcurement
Error:
Receipts cannot be created for the selected items because of one of the following reasons.
The transaction could not be completed successfully. Please contact system administrator for assistance.
I found a metalink note 1622093.1 which says delete the pending transaction but it did not make any difference.
Thank you
Roy

Sapna,
It seems that this issue is coming becouse of not given right permission to end user
To edit the Web page need to have atlest Wirte permission....
Thannks

Similar Messages

Procurement Coordinator received Authorization Error when creating Bid Inv

Hi All,
In SRM I have an issue Please help me in solving this. Please see below
Procurement Coordinator received Authorization Error when creating Bid Invitation from Sourcing Cockpit. Message states u201CMissing Transaction BBP_BID_EXTSOu201D; however Bid # is still created. User requests that Authorization issue is resolved and Bid # appear for Procurement Coordinators. This problem does not happen for Commodity Managers

Hi
Please do the following steps.
When you are using the Internal ITS,you need not run the report W3_PUBLISH_SERVICES.(only SIAC_PUBLISH_ALL_INT )
ALso pls check the foll:
-->activate the services through SICF tcode.
> Go to SICF transaction and activate the whole tree under the node Deafult host>sap>bc>gui>sap>its.
>Also maintain the settings in SE80>utilities>settings>internet transactuon server-->test service/Publish.
Table TWPURLSVR should have entries for the / SRM server line as well as gui and web server.
Could you please review again the following steps ?
Did you check that ICM was working correctly (TA SMICM) ?
1-Activate the necessary ICF services
With transaction SICF and locate the
services by path
/sap/public/bc/its/mimes
/sap/bc/gui/sap/its/webgui
2- Publish the IAC Services
With Transaction SE80 locate from
the menu Utilities -> Settings ->
Internet Transaction Server (Tab) ->
Publish (Tab) and set On Selected
Site = INTERNAL.
3- Locate the Internet Services SYSTEM and WEBGUI.
Publish these services with the Context
Menu -> Publish -> Complete Service
4- Browse to http://<server>:<icmport>/sap/bc/gui/
sap/its/webgui/! and login to the
webgui.
Hope this will help.
Please reward suitable points.
Regards
- Atul

Error when creating a user - IAM-3010183 : An error occurred while checking if a user already exists with the Common Name generated.

Error when creating a user - IAM-3010183 : An error occurred while checking if a user already exists with the Common Name generated.

in OIM 11g R2
Message was edited by: 2b3c0737-074f-48d0-a760-e24e3ed9a37c

Syntax error when creating a user-defined table type in SQL Server 2012

Why am I getting a syntax error when creating a user-defined table type in SQL Server 2014?
CREATE TYPE ReportsTableType AS TABLE
( reportId INT
, questionId INT
, questionOrder INT );
Results:
Msg 156, Level 15, State 1, Line 1
Incorrect syntax near the keyword 'AS'.

Hope these posts could help,
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/37a45a9a-ed8c-4655-be93-f6e6d5ef44be/getting-incorrect-syntax-while-creating-a-table-type-in-sql-server-2008-r2?forum=transactsql
Regards, Dineshkumar,
Please Mark as Answer if my post answers your question and
Vote as Helpful if it helps you

Error when Create User Defined Field

Hi all, i got an error when create UDF
Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
Here is part of my code
oUserFieldMD.Name = fieldname
        oUserFieldMD.Description = fielddesc
        oUserFieldMD.Type = fieldtype
        oUserFieldMD.DefaultValue = defaultValue.ToString()
        If fieldtype <> SAPbobsCOM.BoFieldTypes.db_Date Then
            oUserFieldMD.Size = fieldlength
            oUserFieldMD.EditSize = fieldlength
        End If
        If fieldtype = SAPbobsCOM.BoFieldTypes.db_Float Then
            oUserFieldMD.SubType = SAPbobsCOM.BoFldSubTypes.st_Price
        Else
            oUserFieldMD.SubType = SAPbobsCOM.BoFldSubTypes.st_None
        End If
        oUserFieldMD.TableName = tablename
        lRetVal = oUserFieldMD.Add()
        prgbar.Value = prgbar.Value + 1
        If (lRetVal <> 0) Then
            msgs.Add(tablename & " - " & fieldname & " : " & oCompany.GetLastErrorDescription())
        Else
            msgs.Add(tablename & " - " & fieldname & " : successfully created!")
        End If
the error come when reach lRetVal = oUserFieldMD.Add()
what is wrong with my code ?
thanks.

This could be a x64/x86 problem. Try following this thread
[GetCompanyService|GetCompanyService] and recompile your code for the platform you need.

Error when creating a FDM application on SQL Server 2005

Hi,
we are getting this error when creating a FDM application on SQL Server 2005
Error: EPMCSS-07003: Failed to validate identity. Invalid identity . Check identity.[SET_ROLES_LIST]
We are using Windows System Integration although we have also tested with sa user.
Any ideas?
Thanks

Based on the error message it appears to be having a Shared Services issue. Verify that the "ADMIN" account is being used for the HSS connection and that you are using "ADMIN" to create the application and see if the same error is returned.

Error when creating a webpart page in site pages - Sharepoint 2013

Hi,
I am getting Unexpected error when creating a new webpart page in site pages on sharepoint 2013 site.
I have no clue on this.
Any help is much appreciated.
Thank in advance.
Smile Always

Hi Smile,
For troubleshooting this issue, let's verify the followings:
Whether you can create wiki pages well.
Whether this issue occurs for other sties.
Whether all users have this issue. Please test with Site administrator, compare the result.
As Naveen said, please check the log file to find more information about this issue. The path of the log file is: C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\LOGS.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Runtime Error when creating a new group

I'm getting a runtime error when creating a new group on a site collection?
Thanks in advance

The most possible reason is if your site collection is reached the maximum site quota limit,then there is chance to get the run time error while creating a new group.
In this case,you will get the error while creating/updating the group or while adding the new user/uploading any content.
Also Ensure the group name is not having any special/unsupported characters.
Feel free to share the error screenshot/entry in the ULS logs.
Please remember to click 'Mark as Answer' on the answer if it helps you
Best Regards,
Pavan Kumar Sapara
s p kumar

ERROR When Create Project

Hello,
I receive this below error when create project
GeneralQueueJobFailed (26000) - CreateWssSite.CreateWssSiteMessage. Details: id='26000' name='GeneralQueueJobFailed' uid='c27f372b-2a35-e311-9420-00155d000806' JobUID='05a50b2a-2a35-e311-9420-00155d000806' ComputerName='cb123222-a0b2-4ad1-bd20-3e4809df7a4a'
GroupType='CreateWssSite' MessageType='CreateWssSiteMessage' MessageId='1' Stage='' CorrelationUID='58b84c9c-8266-f0a7-f7a4-a41dcfc7411f'. For more details, check the ULS logs on machine
cb123222-a0b2-4ad1-bd20-3e4809df7a4a for entries with JobUID
05a50b2a-2a35-e311-9420-00155d000806

Hi Khaleel,
Do you see only this message or do you also see something like below:
CreateWssSiteContent: Creating project site failed! Project Uid=8e180c10-5433-4424-a236-54ea989872fa, site URL=http://PROJECT.test.com/PWA/AAAtest1000, site name=AAAtest1000. Microsoft.SharePoint.SPException: The site template requires that the Feature {e8389ec7-70fd-4179-a1c4-6fcb4342d7a0}
be installed in the farm or site collection. at Microsoft.SharePoint.Utilities.SPUtility.ThrowSPExceptionWithTraceTag(UInt32 tagId, ULSCat traceCategory, String ......
So, if you see the above message, its a feature that is missing. How many servers do you have in the farm? Do you have a separate project application service server?
In that case you will have to copy the feature under "14\TEMPLATE\FEATURES" features folder from WFE to application server also. This is because when creating a project workspace, PSI will refer to this feature on application
server and since it is not present in application server, it fails creating the site.
Happy troubleshooting.....
Vikram Daruru - MSFT

Error when creating files for transport request SAPK-700BGINPLMWUI

Hello experts,
We're upgrading our 46c System to ERP 6.0 EHP4.
In Phase EHP_INCLUSION we get the following error Message: Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"
We've already checked the SAINT version; Upgrade Fix, SAPCAR version. We've checked our TMS as well and everything seems O.K.
Any help would be really appreciated!!!
Complete Error message:
EhP component PLMWUI, 700
Looking for SAINT package for 'PLMWUI' ...
R3upReadNewPackages:
patchType='U', langVect='DEC'
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "spda_read_new_packages" by RFC
ismovesVersion='0'
R3upReadNewPackages: exit: rc=0
... No matching package found.
R3upReadNewPackages:
patchType='I', langVect='DEC'
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "spda_read_new_packages" by RFC
ismovesVersion='0'
R3upReadNewPackages: exit: rc=0
Found: name = 'PLMWUI', release = '700', package = 'SAPK-700BGINPLMWUI', type = 'AOI'
... Matching package found: 'PLMWUI','700','SAPK-700BGINPLMWUI'
(trc) R3upPatchDisassembleQueue: 1 package queue entries
(trc) R3upPatchDisassembleQueue: force=YES
(trc) R3upPatchDisassembleQueue: 1 packages will be disassembled
Starting disassembling package queue
Date & Time: 20100319133139
Starting RFC Login to: System = "X05", GwHost = "sxt ", GwService = "sapgw00"
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "SPDA_DISASSEMBLE_QUEUE" by RFC
Input table IT_PATQ:
"SAPK-700BGINPLMWUI","000","AOI","PLMWUI","700","SAP PLM Web UI","00"
Call of function module "SPDA_DISASSEMBLE_QUEUE" by RFC succeeded
Logging off from SAP system
Date & Time: 20100319133139
Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"

Hello Anthes,
Please Check the things in following sequence :
1.Use latest SAPehpi, R3trans and tp versions.
2. users/group authorization issue and/or ownersip limitations (set 777) .Reboot the server to make sure, that the authorisations are updated and there is no lock on a file in the EHPI dir.Repeat the phase.
Folders where permissions should be 777 are Upgrade directory, Data Directory, Cofile directory and .../EPS/in.
3. Source file corruption can be ruled out by execution
R3trans -l /usr/sap/<SID>/..../abap/data/R-700BGINPLMWUI.SAP (The data file corresponding to the Package which is giving error). Check if this ends fine.
Note 2050
4. Confirm that your transport tool is 'healthy' by testing it in STMS. In SPAM in client 000 use the function Disassemble package and enter the package <Package name>.
5. Try to update the kernel if it not helps.
Best Regards
Niraj

Error when creating project for ESS

I am getting the folowing error when creating a project in Dev Studio for the ESS leave application ess~lea. Pls help
Failed to sync DC "sap.com/ess/lea(sap.com_SAP_ESS_1)" in configuration "JDI_XSSTrack_D". File "C:\Documents and Settings\User\.dtc\0\DCs\sap.com\ess\lea\_comp\.dcdef" does not exist locally after sync but it exists on the serve
Regds
Thirur

Uninstalled and reinstalled the dev studio. Now it works.

ESS Payslip : Error when creating form

Hello All,
I get the following error when i click on
ESS - Pay Information - Payslip - Payslip Inquiry Service.
Please help !
Full Stack Trace
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Error when creating the form
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:121)
     at com.sap.xss.hr.rep.fcrfw.FcRepFramework.reportBapiRet2Error(FcRepFramework.java:525)
     at com.sap.xss.hr.rep.fcrfw.FcRepFramework.callRfcGetForm(FcRepFramework.java:394)
     at com.sap.xss.hr.rep.fcrfw.FcRepFramework.processFollowingActions(FcRepFramework.java:484)
     at com.sap.xss.hr.rep.fcrfw.FcRepFramework.callRfcExecAction(FcRepFramework.java:378)
     at com.sap.xss.hr.rep.fcrfw.FcRepFramework.initModel(FcRepFramework.java:292)
     at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFramework.initModel(InternalFcRepFramework.java:256)
     at com.sap.xss.hr.rep.fcrfw.FcRepFrameworkInterface.initModel(FcRepFrameworkInterface.java:136)
     at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface.initModel(InternalFcRepFrameworkInterface.java:198)
     at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface$External.initModel(InternalFcRepFrameworkInterface.java:258)
     at com.sap.xss.hr.rem2.selection.VcRem2Selection.onInit(VcRem2Selection.java:245)
     at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2Selection.onInit(InternalVcRem2Selection.java:249)
     at com.sap.xss.hr.rem2.selection.VcRem2SelectionInterface.onInit(VcRem2SelectionInterface.java:161)
     at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2SelectionInterface.onInit(InternalVcRem2SelectionInterface.java:144)
     at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2SelectionInterface$External.onInit(InternalVcRem2SelectionInterface.java:220)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:754)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:289)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:220)
     at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1288)
     at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:355)
     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:548)
     at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:592)
     at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:864)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:319)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:684)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:215)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)

Please check the user language setting in SU01. If no language is defined, the portal will use the browser to set the portal language. The payslip language is defined in feature HRFOR and must match the employee's molga. If the language defined for the employee's payslip is different from the user's, a dump will occur. Try changing the user's language setting.
Best regards,
Antonio

Error when creating VLO1N: u201Corder blocked for delivery as a result of credi

Error when creating VLO1N: u201Corder blocked for delivery as a result of credit checku201D.
Observations @ FD33:
Credit limit     :     3,50,000.00
Receivables     :     1,53,903.94
Credit exposure:     1,55,185.17
Current sales order value:
Net: 43127.74
Tax: 7331.72
Total sales order value : 50,459.46
Sales order created on : 18/8/09
Horizon                      : 2/9/09
Risk Category                : HRR (High Risk Re-check)
====================
Need to know:
Tax amount is also included in the credit check?
Is the total sales order value: 50,459.46 is included in the Credit exposure value?
If it is not included then the total will go beyond the Credit limit value. Fine the block is ok.
If it is included in the Credit exposure, then the total amount will be 3,09,089.1. Which is less than 3,50,000. So credit check should not happen.
But it is blocked and the error is through as u201Corder blocked for delivery as a result of credit checku201D.
Please let me know the reason & what other checks I have to look on.
So that I can provide the reason for this action.
Thanks in advanceu2026

Hi,
Generally total value of the sales order is considered for the Credit management.
Now if you want tax should not be included for the credit management.
Then you have to make small changes in pricing procedure.
Go to V/08 and select your pricing procedure and go to control data.
Check out the setting where your grand total is happening.
In the subtotal column you will find out A has been put up.
This A trigger the credit exposure of the credit management.
So if you want that tax should not be included then, check out where your total net value has been calculated before tax.
Over there put the A in the sub total column and remove it from the previous setting.
Save this setting now check whether the credit is happening including the tax or not.
Regards
Raj.

Integration Builder - runtime data cache - Error when creating cache list

All,
When I go into the Integration Builder --> Administration --> Runtime tab --> Data Cache
I get a message saying "Error when creating cache list".
All cache areas look ok and I do not see any other error.
Also, RFC INTEGRATION_DIRECTORY_HMI looks good.
Please advise.
Thanks a lot.

Hi,
Use transaction SXI_CACHE to update the Integration Directory cache. Alternatively, you can use the following URLs to update the CPA cache. Use XIDIRUSER to refresh the cache.
For complete cache refresh u2013 http://<hostname>:<port>/CPACache/refresh?mode=full
For delta cache refresh u2013 http://<hostname>:<port>/CPACache/refresh?mode=delta
If this does not solve the issue, check transaction SLDCHECK to ensure that connection to SLD is available. If the connection fails, check the configuration in the transaction SLDAPICUST. Make sure that the password maintained is correct and the maintained service user is not locked.
Now in the Integration Repository go to Environment u2192 Clear SLD Data Cache. Also go to Integration Directoy and clear the cache using menu Environment u2192 Clear SLD Data Cache.
Open the XI Start Page and click on Administration. On the Repository tab, choose Cache Overview. Refresh the cache using the buttons/icons on the right. Use XIDIRUSER to refresh the cache. Carry out cache refresh in the same way on the Directory and Runtime tabs.
regards,
ganesh.

Error when creating Delivery

Hi experts,
I've received an error when creating Delivery from AR Reserve Invoice :
[Delivery - Rows - Warehouse Code][line: 0] , 'No matching records found '' (CRD1) (ODBC -2028)' [Message 131-183]
Don't know what is this, but some of the transaction in Delivery from AR Reserve invoice I mean no error.
Regards,

HI,
Pl. check the links of BP Master.
Set Bill to and ship to address manually for the Business Partner and set the new address as default .
Also check the settings of Items Default warehouse Etc.
Hope Helpful!!!

User is receiving error when creating receipts in iProcurement

Similar Messages

Maybe you are looking for