User name and password required to access Security settings

I have an HP5520e all in one printer. I am trying to set it to scan to my computer. The instructions say I should activate Webscan from the Administrator Options under Settings and Security. When I try to get to Administrator settings I am being asked for a user name and password. What username and password am I supposed to enter here?
This question was solved.
View Solution.

gnomad899,
Welcome to the HP Forum.
Start with the standard:
admin = admin
password = password (or leave it blank)
This assumes, of course, you have not used EWS (embedded web server) and set a password for it previously -- which you CAN do while using EWS. Once you do set a password using the EWS page, everytime you want to look at certain settings, adjust certain settings, you have to enter the password you set up.
EWS is simply the web page interface to the printer -- like you use a web page to talk to your router software. Same thing - sort of, except you type in the printer IP on your browser instead of the router, of course.
============================================================================
If it won't let you in,
You can try resetting the printer. Be Aware that should you do this, you have to re enter any previously entered information (wireless settings, etc.).
You might be able to reset the printer on the front panel - settings > factory defaults (or similar).
OR
from TroubleShooting > Solve a Problem > Printer Does Not Maintain Wireless Connection
Step four: Reset the printer and wireless router, and then restart the computerFollow these steps to reset your printer and your wireless router, and then restart your computer.
NOTE:Consider bookmarking this page on your web browser so that you can reference it after restarting the computer.
Follow these steps to reset your printer, your wireless router, and your computer.
Press the Power button on the printer to turn it off.
Disconnect the power cord from the rear of the printer.
Disconnect the power cord from the wireless router.
Turn off the computer.
Wait 30 seconds.
Reconnect the power cord to the wireless router.
Wait 30 seconds, or until the router is fully on and ready.
Turn the computer back on.
Wait for the computer to reload.
Reconnect the power cord to the rear of the printer.
Turn the printer back on.
===========================================================================
Reference:
HP 5520 e All in One Printer
User Guide
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Kind Regards,
Dragon-Fur

Similar Messages

I need to know if there is a user name and password associated with accessing a certain website.

I'm not sure if at one time there was a username and password given so that I automatically could access a site. The site is the home page for my department on the intranet of the company I work for, and they've activated a new vpn. If I use Safari, after activating the vpn opening Safari, it asks me for a user name and password for some proxy server and from there on out I can navegate the external web or the company intranet. Using Firefox, I do not get prompted for a user name and password but I cannot access my homepage yahoo.com or any public website; I can, however access my company's intranet. The IT guy says there must be some user name & pw to access the site that I've previously asked Firefox to memorize but which I can't see. I don't think so but I can't figure out where to find the list of sites that Firefox has memorized passwords for.

You ca n look in the Password Manager.
*Firefox > Preferences > Security: Passwords: "Saved Passwords" > "Show Passwords"
*https://support.mozilla.com/kb/make-firefox-remember-usernames-and-passwords

I'm trying to access a forum that requires a user name and password. When I do it on my mac it tells me the password is incorrect but when I do it on my iPad, I can access it without any problem. I can confirm the username and password are the same

I am trying to access a forum for which you need a username and password but it keeps telling me the username/password i've entered are incorrect. Bizarrely, when I enter the same username/password combination on my iPad, it grants access without any problem.
What could be causing this, is it an issue with cookies, caches or similar. How can I resolve it? The forum administrator is at a loss as to what the problem is.

Try the following steps in Safari to see if they help:
1) First try clearing the Safari cache. To do this pull down the Safari menu and select 'Empty cache...', then try logging into the site again.
2) If the issue continues then reset Safari by pulling down the Safari menu and select'Reset Safari...'. You will be presented with a list of items that can be reset. I suggest selecting the 'Reset saved names and passwords', and 'Remove all website data' options at a minimum.
Here is a list of the options and what they do. I pulled it from the Safari help page.
Clear history:
Clears the list of webpages you viewed.
Reset Top Sites:
Clears any changes you made to Top Sites, such as adding or pinning sites. If you also clear your history, your Top Sites page reverts to showing the webpage previews displayed when you first installed Safari.
Remove all webpage preview images:
Clears any thumbnail images Safari saved of webpages you viewed.
Clear the Downloads window:
Clears the list of files you downloaded from websites. Only the names are removed; the files themselves are still on your disk until you remove them.
Remove all website icons:
Removes website icons, which are small graphics that help identify sites on the Internet. You see them in the Safari address field and bookmarks list, and other places. These icons are stored on your computer.
Remove saved names and passwords:
Removes user names and passwords that Safari automatically fills in at websites that require them (if the AutoFill feature is turned on).
Remove other AutoFill form text:
Removes some personal information, such as telephone numbers, that Safari uses to automatically fill in forms on webpages (if the AutoFill feature is turned on). Removing AutoFill information does not remove information from your address book.
Close all Safari windows:
If you don’t close all Safari windows, someone could use the Back and Forward buttons to view the webpages you visited.
Reset all location warnings:
Clears any information websites saved about your location.
Remove all website data:
Removes cookies, tracking information, and other data that websites stored on your computer.

Time Capsule won't accept my user name and password for access - Help!

Hi all,
My Time Capsule seemed to stop working one day and I had to do a hard reset with the little button at the back. After that it worked and I restored my wireless network settings but now I can't access the Time Capsules hard drive with Time Machine.
When I try to choose it as my Backup Disk in the Time Machine preferences it says "Enter your user name and password so Time Machine can access the file server "Our Time Capsule" (the name of my time capsule). However, every time I try to enter my password I get "Sorry, you entered an invalid username or password".
I've already tried several resets of the Time Capsule and I've also tried logging on my computer as the Root user and changing my administrator account password back and forth but no go.
Help! and Thanks.

Norman & Harry,
Consider the following:
*_Time Capsule Keeps Asking Me For a Password_*
It will be important to know what is going on, or what you are doing when it asks for the password. Is it asking for a password only when Time Machine attempts a backup? Consider this:
It is NOT your username and password it wants when you try accessing the Time Capsule. (I know... it SAYS "username and password") But it means the Time Capsule's Name and Password.
You will find that by launching Airport Utility.
Select the TC on the left.
Click "Manual Setup".
Click the "Time Capsule" Tab.
You will see "Time Capsule Name:" and "Time Capsule Password".
Make sure “Remember password in keychain" is checked.
That is the information you need to enter when it asks for "username & password."
*I Don’t Remember What My Time Capsule Password Is*
You can see what your current TC password is by going into Keychain.
Open your Keychain and select "login" from the Keychains pane in the top left. Highlight "Passwords" in the Category pane from the lower left.
Sort all the items by Kind. Note everything labeled "Airport...". How many do you have listed? There should only be one "Airport base station password" for each base station that you have active. Also, there should only be one "Airport network password" for each network you have created. If there are more than these, then delete all but the ones with the most recent Modification date.
To see what passwords are being stored, double-click your Time Capsules' entry. A new window will appear.
Put a check beside "Show Password". You may be asked for your own Admin password so enter that.
Now the Password field will display the password you entered into Airport Utility for your Time Capsule
*It Still Won’t Accept the TC Name and Password*
Launch Airport Utility --> Manual Setup.
Select "Disks" in the tool bar above.
Click the "File Sharing" tab.
Is "File Sharing" checked? It should be.
What is selected beside "Secure Shared Disks"? If it says "With Accounts" or "With a Disk Password" then the system will ask you for a password every time it mounts the TC hard disk. If you switch it to "With Time Capsule Password" then use the password you designated earlier in the “Time Capsule" tab. It should only ask you once and then never again - because you had checked "Remember password in keychain".
If you have made any changes then click "Update".
Let us know if this resolves your issue.
Cheers!

I just switched to Charter. When going to Mozilla Firefox a box appears saying, Authentication Required and asks for a User name and Password. What do I do?

I switched from CenturyTel to Charter. I can't use Firefox because a box appears asking me for Authentication Required, User Name and Password. When I hit cancel, this message appears:
HTTP 401 - Unauthorized
Authorization is required to access the configuration server.
You must enter the correct username and/or password.
When I called Charter, they told me they recommended using Internet Explorer. I told them I didn't want IE, I preferred Firefox. They recommended I go to your support page, so here I am. :o)

Have you reset the password recently for the email account?
A real simple fix usually is to delete the mail account (settings < mail contacts calendars, tap the affected account and choose delete at the bottom) Then re add the account.

Safari user name and password for secure sites

I just sent the following to "Mac OS X Feedback"
Some secure sites like brokers, e.g., Ameritrade, do no allow autofill in Safari for the user name and password. In fact Safari does not even ask if you want to remember the user name and password just entered for such sites.
I would like to suggest that something be done for users in such cases:
1) A dialog box comes up warning that this website does not allow autofill.
2) A suggestion is made as to what network setting needs to be changed to allow autofill to work
3) A fix in Safari to take care of this problem
4) Add something to Safari help
Does anyone have a work around for this problem?
Mac Mini (Intel Core Duo) Mac OS X (10.4.5)
Mac Mini (Intel Core Duo) Mac OS X (10.4.5)
Mac Mini (Intel Core Duo) Mac OS X (10.4.5)

Think about what would happen if someone gained access to your Mac, say while you were briefly away from your desk or whatever. They launch Safari, go to the login web page of (for instance) your bank & discover that autofill has helpfully filled in your user name & password so all they have to do to get access to your accounts is click the login button.
From there, they can transfer all your assets to some other account (theirs!) or invest in FlyByNight.com or whatever -- they can do anything your password lets you do with any password-protected account ... anything!
Take this a step further. Say you have enabled auto-login to your primary account at startup, or have used an easy-to-guess account password for it. Someone steals your computer ... & with it potential access to all your online accounts with autofill entries.
Not a pretty picture, is it?

IPad 4 asks for User Name and Password to access home wi-fi network

I have the iPad 4, which occasionally fails to connect to my home network and will ask me for both an User Name and Password to access my home wireless network. I have no idea what would constitute an User Name and I have tried the name of the network and other options to no avail. When I close down the iPad and take it closer to my Wi-Fi Router (BT Home Hub 3) then switch back on it asks for the password only as normal and all is well. What concerns me is this only happens on the occasional basis, but I am trying to access the router from exactly the same place.
Is there a fault with the wireless function on the iPad? I have contacted Apple Support by telephone and they were very helpful to be fair, but they had not come across this issue before.
Has anyone experienced anything like this and could advise me? My other option would be to email Apple Support, but I cannot find an email address for Apple Technical Support UK.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I am receiving the 'Could not sign you in [Access denied: 530]. Check your user name and password' problem on Adobe Muse CC 2014 and I cannot access the xml file that is supposed to fix this issue?

I am a PC user and I have Adobe Creative Cloud Muse 2014. I have received the 'Could not sign you in [Access denied: 530]. Check your user name and password' error when trying to upload my muse site to my ftp host, GoDaddy. I have successfully done this in the past and only recently it has stopped working. I looked online at the FAQ Adobe Muse Help | Uploading an Adobe Muse Site to a third-party hosting service and it said to download the ftpprefs.xml file but this file simply leads to a blank page that says /*Not found*//*Not found*/.
Can someone direct me to a working page with this file or provide a different solution? Thank you!

Hello,
As you are getting error [Access denied: 530] it means issue is with access. Either the username and password you are entering is incorrect or you do not have proper permissions.
I would suggest you to contact Godaddy to either reset password or reset the permissions.
Regards
Vivek

I want to access the database with user name and password without con. info/udl

hi to all,
im doing project related with database... normally i'll connect ***.udl file to open database.vi.
now what is my question is I want to open the database with the user name with password.... y i need this because once i run the program the program should ask username and password to open database for write/read operation. if its wrong user name and password means program should be denied...
can any tell how to access the database toolkit with the username with password....
im using labview 7.0...
i think my question is clear....waiting for reply thank you in advance...
pls see this attachment.....
Regards,
N. Srinivasan
Attachments:
access.vi ‏37 KB

i have already read that link in the discussion forum...but im still have some confussion in... i attached file is so like to give user name and password..?
and one more things can tell wat to do in ODBC and MDB and in UDL for password lock.. each time i run the promgram it should ask password to acces the database..
thank you a lot for your reply..
it will be more more useful if u clear my doubts clearly....
Regards,
N. Srinivasan
Attachments:
user=pass.PNG ‏35 KB

Initially stating No authorization required using Adobe. When I try to change it so I can transfer downloaded books by my Nook e-reader it I get an error message stating the Adobe user name and password is associated with another computer. What gives?

When I set up Adobe reader on my computer to be able to download books from a library and then transfer to my Nook e-reader, I initially stating No authorization required using Adobe. When I try to change it so I can transfer downloaded books by my Nook e-reader it I get an error message stating the Adobe user name and password is associated with another computer. What gives?

This is pretty surprising and wierd that even Reader 10.1.1 is crashing on your system. It works pefectly for me.
Would it be possible for you to get the crash dump, and upload it, so that I can have a look at the same.
Download PROCDUMP from <http://technet.microsoft.com/en-us/sysinternals/dd996900.aspx> and extract it to a folder, say, c:\temp\procdump.exe
Open cmd prompt and type "cd c:\temp".
Launch the browser and open the PDF.
Open task manager, sort processed by name. Two AcroRd32.exe instances should have been launched. Note the PID (a small integer like 5588) corresponding to the AcroRd32.exe with the higher memory usage; this is the process that must be crashing. Note this PID.
On the cmd window, type "procdump -e -ma 5588 c:\temp\01.dmp" (replace 5588 with the actual PID of the process noted in Step 4). Procdump will now wait for the aoolication to crash. If it throws a EULA, accept it.
Perform your steps to cause the crash.
Procdump will have created a dump file at "c:\temp\01.dmp". Zip it up (since it will be 100s of MBs otherwise) and share with me.
Thanks in advance for all your help
Ankit

I need reset my security information, I offered my user name and password is correct bout I can't get the information from your website in my email. So that I can't buy new app pay my money.

I need reset my security information, I offered my user name and password is correct bout I can't get the information from your website in my email. So that I can't buy new app pay my money.

Hi,
Which website your are using to update the Adobe Flash player? No Adobe website ever ask for any id and password to update the flash player.
If you are using MAC machine and its the password prompt while installing update that you are talking about then please follow What userid & password do I need to install Flash Player?
-Varun

Leopard Safari requires reloading user name and password

Tried asking this another way and no one answered, which left me to wonder if no one on this forum knows the answer or it I wasn't clear in asking it? Let me be more specific: Leopard Safari requires a user name and password to be entered each time an appropriate web site is opened, even when "refresh" is clicked. For example, I use "myyahoo" for the homepage, but now each time I open Safari, I am required to reenter the user name and password. Ditto every site I have saved autofill data for. This did not happen with Tiger, prior to upgrading to Leopard last Friday. I also tried phoning the Apple Care support number -- a 37 minute wait produced someone who said my call needed to be forwarded to the Safari desk, and likely involve another extensive wait. So I gave up that idea and am trying here again. Help!

Thank you! In Preferences, all the autofill boxes are checked. Just to be sure, I unchecked them all then rechecked them. Autofill form works in Edit. Before the upgrade, Safari was able to maintain user names and passwords on sites where I wanted them. After the upgrade Friday evening, Safari stopped doing this on all sites where I already had a user name and password, including the Mac site. Simply, I am now required to re-enter this information every visit to every site, even if I just click refresh, not only when I exit Safari and return. Even if I leave a site where I have entered the password, visit another site, and then return, the user name and password must be entered again. I have still had no luck getting Apple Care on the phone. This morning I bit the bullet and decided to wait until finally somebody answered, but no amount of patience can listen to scratchy wait music for more than 45 minutes, which is when I gave up. So if someone here doesn't understand this, guess I'm stuck having to enter this information again and again and again... or figure out how to get back to Tiger.

I'm on a web site that requires a user name and password to enter the site., but Firefox has never asked me if I want to save this info. Is it possible to do this even though Firefox never asked me?

This is the only site that Firefox has not asked me to save user name and password.

The website may be using autocomplete=off to prevent Firefox from saving the name and password.
You can remove autocomplete=off with a bookmarklet to make Firefox save the name and password.
*http://kb.mozillazine.org/User_name_and_password_not_remembered
See also:
*Saved Password Editor: https://addons.mozilla.org/firefox/addon/saved-password-editor/

P1102W wifi connection requires SSID pluss user name and password to connect

Hello Community.
I had investigate how to connect my P1102w printer to the wifi and it is easy but here is the problem.
I have no problem searching with Printer wifi config my WIFI SSID. (usb printer plugged) but My connection requieres when SSID found a user and a password.
I have not find where does the printer have the option to set up my user name and password to login in the needed SSID.
Can sombody help me.
Thanks.

Yes, but the method is to simply connect the TC to the computer by ethernet and use it on a separate network. That is the best way to do it.. but you can also do the same thing better and easier with an external hard disk plugged in. For a desktop computer this is a better solution in a way. You will only be using the TC for Time Machine backups anyway.
If you want to continue to use the TC.. then the actual network settings I put in this thread with a whole series of pictures.
https://discussions.apple.com/thread/4817218?tstart=30
If you cannot follow any of that just ask.

User name and passwords autofill

user name and passwords autofill only autofills the user name and not the password. Any ideas on how to change this so that passwords are also autofilled?

Hi Geoffrey
Some web sites (particularly banks, credit card companies) specifically code their sites to prevent the password from automatically appearing. This is due to security concerns.
Notwithstanding the above, It's possible there's oddities in the Keychain file. This file retains your User Name/Password information. In your Finder: Applications>Utilities folder. Open Keychain Access. Go to the Keychain Menu>Keychain First Aid>Repair. If any errors appear rerun until you get a clean pass.
If the lack of auto-fill continues, there is a workaround for the web coding via 3rd party Safari add-on (shareware) SAFT. In SAFT's Misc. preference file settings (part of the Safari Preferences) is "Auto-complete always on".
Note: some of the more elaborate security sign-ons, such as those that use multiple pages for the sign-in are not overridden by the SAFT feature.

User name and password required to access Security settings

Similar Messages

Maybe you are looking for