User name error For Excel Analyzer

Hi,
I am using Oracle BI 10.1.3 . I have configured to checked credentials from Oralce 10gXE database.
Bi Publisher is connecting using the database user I have created, the same is with MS-Word. But Ms-Excel is not authorizing .
It is still taking the same Administration as username and password.
The same is for creating Dashboard.
Please let me know how should I configure Analyzer,Dashboard to work with my db user I have created.
Thanks
Edited by: Khayyam2 on Jun 20, 2011 2:55 PM

Update this post saying that I've added the property ROLES=myrole inside the connection to SSAS for the Excel workbook and also the SSAS roles function without any problems.
It seems that the EffectiveUserName authentication is a valid one and so I could think to use it instead of Kerberos authentication.
Bye
Hello,
I have followed the steps mentioned under http://technet.microsoft.com/en-us/library/jj938164.aspx. My SharePoint site has 3 users User A, B and C. Under SSAS db I have created a
role and added read permission to User A and B. But, User A, B as well as C can read the excel file published onto the SharePoint.. Why is User C able to read it when I have added only User A and User B to the role under SSAS db?

Similar Messages

Error message "incorrect pasword or user name given for gmail"

When i'm conected to my home wifi or with 3G, i can't read my emails for my gmail account with Mail. Error massage says wrong pasword or user name given for gmail but it works when i'm on the wifi at work. I tried to disable SSL but i can't change any of the smtp stuff, it's all grey.
All the pop smpt etc are activated on my gmail account.
And it's the same on my iPad.

I just googled your issue and found 100's if not 1000's of similar problems with verizon.
Perhaps it's best to wait to try on their forums since it's apparently a widespread issue.

No service user name found for Integration Server

Hi All,
Our XI is in production..once in a while (once in every 3 weeks) messages get fail saying: No service user name found for Integration Server. When we re-start J2EE engine, messages get processed fine. Does anyone know the reason for the above error?
<SAP:AdditionalText>3:No service user name found for Integration Server is.00.******<S/AP:AdditionalText>
<SAP:Stack>Error when reading the access data(URL, user, password)
Thanks
Indrasena

Hi,
did you configure your adapters like IDoc, RFC based on the SAP service user created in the SAP system ? i,e RFC destination etc..
did you check pipeline url is correct in the SLD>Business System><Integration Server> and check the url. It should have http port.
Also check this thread-
sRFC-adapter and file adapter with error: no adapter found
Regards,
moorthy

'Blank user name' error when trying to change email password

My password on our mail server changed, when I tried to change the password on my Storm 9500 I get 'Blank user name' error when trying to change, but I have typed in a user name!!!!
BLOODY frustrating because now I am not receiving any mails at all, so my business out of the office has come to a standstill!!!!
Vicky
Solved!
Go to Solution.

Try changing the email password on your PC, if you are having problems doing so from your device.
From your desktop PC: http://www.blackberry.com/btsc/KB02830
North American Carriers - scroll down to select your carrier
WorldWide Carriers - Find your carrier on the list
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Errors for excel - excel service unavailable. Event Viewer has error event ids - 5239 and 5231.

Errors for excel - excel service unavailable. Event Viewer has error event ids - 5239 and 5231.
We restart the excel service app and it solves. Looking for permanent solution.
Regards,
Kunal

To resolved the issue do a simple restart.
Restart the server
Before restarting, verify that this problem occurs often. It may be an intermittent problem that is automatically corrected and does not require you to restart the server.
If the problem occurs often, restart the server running Excel Services Application.
If the problem continues to occur often, and restarting the server did not correct the problem, confirm that the hardware of the server is functioning correctly, or reinstall Excel Services Application and re-add the server to the server farm.
Here's the article with the explanation: Error communicating with Excel Services
Application - Events 5231 5239 5240
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Default User name & Password for NETWEAVER

Hi Everybody,
              I am a Basis Admin in my company working with ABAP Stack installed in my Server.
       Now I have installed Java Stack for Netweaver in a Separate System to Understand the Functionality of Netweaver & its Concept.
     Now the Problem is i am not able to Login Netweaver. I dont know the Default User name & Password for Netweaver after installing it.
    Also, what are the Main features of Netweaver Compare to ABAP Environment
Could somebody help me to Understand Netweaver and its Default User name & Password to login?
Thanks,
Siva

Hi
The default asmin user for your Java add in would be J2EE_ADMIN and guest user would be J2EE_GUEST.
The default password would be the password you provided at the time of installation.
Regarding information on Netweaver Java, follow link:
http://help.sap.com/saphelp_nw04/helpdata/en/0d/a3bb3eff62847ae10000000a114084/content.htm
Regards
Rahul

Email setup problems - user name error

Hello,
This afternoon, I was handed a blackberry for the first time by my work. It had previously been someone elses but was wiped. I am having problems trying to get it to set up my emails. Here's what is happening:
Click on Setup Wizard
Click on Email Setup
Select 'I want to create or add an email address'. Click Next.
Get a message saying 'After you click Next, the Blackberry Internet Service setup application opens.' Click Next
The screen says 'Existing users - If you want to access your email settings or you changed your device, log in.'
It then asks me to enter my user name and password. I put in the user name and password that I registered on the Blackberry ID website earlier today, and it gives me an error saying: 'Blank User Name. Type a valid user name.'
I have tried several times now, tried turning the phone on and off, but nothing seems to work.
Can anyone help?

Hi and Welcome to the Community!
It may be that you have an older device, older OS, and older email configuration app. As such, BIS is likely not linked to the BB ID (that's a newer capability). Rather, you need the actual BIS credentials that are associated with that BB...the BIS service is linked to the BB PIN, and that linkage is at the service provider side, so wiping the device itself does nothing concerning the BIS account credentials. You either need those or you need the carrier to reset the BIS account.
As a company BB, you should probably seek support from your admins...it is also possible that they are blocking the use of personal email accounts on the company owned BBs.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

User Name/Password for SQL*Plus

I installed the Oracle 8i Personal Version in my PC.
I have been trying to log on to the Oracle SQL*Plus screen, which asks me for the User Name, Password and the Host String.
Does anybody out there know what I should use here to log on to this screen?
Thanks in advance.
Jay
[email protected]

Hi,
Please check old mails and then forward questions.
User scott/tiger
DBA system/manager
SYS sys /change_on_install
with regards,
Boby Jose Thekkanath,
Dharma Computers(P) Ltd.
Bangalore-India.
www.dharma.com

LSMW Errors for Excel file upload

Hi all,
We've loaded an Excel file with 20,000+ records into SAP using LSMW and a background run. However, the LSMW returned errors for about 2,000 of those records and seems to have processed the other 18,000. Questions as follows:
1. Is there a way to extract the 2000 records into another Excel file?
2. If so, how can I isolate the 2000 records so that I can reload them with correct information? I do not want to have to go through each record one by one to find them.
3. How can I identify what the problem was for a record that produced an error?
Thanks in advance. Points will be awarded for helpful answers.

u have used LSMW which will normally create a Session which will be executed using SM35 in background mode...Goto the session and click on errors...the errors are been shown up..U can correct there itself or else prepare another one with correct data and do a lsmw once again.

Database, user name, password for Crystal report

We're running BOE XI 3.1 and we use WebI reports. One of our departments uses Crystal reports, and they'd like to be able to run them in our BOE environment so that they can refresh reports over the Web. They uploaded a report to BOE (using Add -> Crystal Reports) but when they try to refresh it they aren't prompted for the database or a password, and the refresh fails.
How do you specify the database / data source / data connection (or whatever it's called) for a Crystal report? How do you specify the user name and password to use for authenticating to the database?
Thanks,
Laura

I am fairly new on this forum but we have been doing exactly what you are talking about with Crystal Reports published to BO XI 3.1 for a while. There are a few things we have found that have to be done to make this work right...
- Use the EXACT same ODBC/database connection setup on both the Crystal Report developer's machine and on the BO server
- On the developer's machine use integrated security for the database connection
- Then after you upload the report to BO, go into CMC and open the Crystal Report's properties. In there under "Default Settings" you will see an option for Database Configuration. The User and Password under the "Use original logon informstion from the report" should be empty. Put in a valid userid and password that has access to the database.
- Also, in the Database Configuration screen make sure the Server and Database boxes are filled-in - they will be greyed out and you can't change them (this is why you have to make sure the ODBC/database info is the same). If they are wrong, you will need to fix the ODBC/database connection in the original RPT file.
- Finally, you need to scroll to the bottom of the Database Configuration page and select the radio box "Use same database logon as when report is run" and then Save and Close
Now when users run the report it will use the user and password you entered to do it. The disadvantage is you are not using integrated security but then the users also never get prompted for a password. We tried very hard to get integrated security to work but could not manage it.
Hope this helps!
Larry

Bdc_open_group invalid user name error

hai ,
the given below is my bdc programming. while am executing(F8) these program it depicts the message in one dilaog box like as bdc_open_group , user name is invalid. or say this program is correct or not.
if any error .recover it
plz resolve this problem.
REPORT YSUSBDC5.
DATA: BDC_TAB LIKE BDCDATA OCCURS 6 WITH HEADER LINE.
START-OF-SELECTION.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
   CLIENT                    = SY-MANDT
DEST                      = FILLER8
   GROUP                     = 'SURENDER'
HOLDDATE                  = FILLER8
KEEP                      = FILLER1
USER                      = FILLER12
RECORD                    = FILLER1
   PROG                      = SY-CPROG.
IMPORTING
QID                       =
EXCEPTIONS
CLIENT_INVALID            = 1
DESTINATION_INVALID       = 2
GROUP_INVALID             = 3
GROUP_IS_LOCKED           = 4
HOLDDATE_INVALID          = 5
INTERNAL_ERROR            = 6
QUEUE_ERROR               = 7
RUNNING                   = 8
SYSTEM_LOCK_ERROR         = 9
USER_INVALID              = 10
OTHERS                    = 11
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM FILL_BDC_TAB.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE                  = 'FK02'
POST_LOCAL             = NOVBLOCAL
PRINTING               = NOPRINT
SIMUBATCH              = ' '
CTUPARAMS              = ' '
TABLES
    DYNPROTAB              = BDC_TAB.
EXCEPTIONS
INTERNAL_ERROR         = 1
NOT_OPEN               = 2
QUEUE_ERROR            = 3
TCODE_INVALID          = 4
PRINTING_INVALID       = 5
POSTING_INVALID        = 6
OTHERS                 = 7
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN          = 1
QUEUE_ERROR       = 2
OTHERS            = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM FILL_BDC_TAB.
REFRESH BDC_TAB.
PERFORM POPULATE_BDC_TAB USING:
'1' 'SAPMF02K' '0106',
' ' 'RF02K-LIFNR' 'SUREN',
' ' 'RF02K_D0110' 'X',
'1' 'SAPMF02K' '0111',
' ' 'LFA1-NAME1' 'SURENDER',
' ' 'LFA1-STRAS' '69 abass ali',
' ' 'SZA1_D0100-SMTP_ADDR' '[email protected]'.
ENDFORM.
FORM POPULATE_BDC_TAB USING FLAG VAR1 VAR2.
CLEAR BDC_TAB.
IF FLAG = '1'.
BDC_TAB-PROGRAM = VAR1.
BDC_TAB-DYNPRO = VAR2.
BDC_TAB-DYNBEGIN = 'X'.
ELSE.
BDC_TAB-FNAM = VAR1.
BDC_TAB-FVAL = VAR2.
ENDIF.
APPEND BDC_TAB.
ENDFORM.
regards
SURENDER

Hallo,
I want to share what happend to me with my bdc Program.
I was able to create Sessions of Batch input (SM35) through the Creation Program ZRSFFL0A (writen below) from 29.04.2008 to 21.05.2008. On May 21 I changed a parameter to play an error, since than the proper original programme has never worked.
Now while I am executing(F8) it shows the message in one dialog box 'BDC_OPEN_GROUP user name is invalid'. I don't know why.
**During Debugging the program stopped Function SAPLLANG:
FUNCTION CONVERSION_EXIT_ISOLA_OUTPUT.
""Lokale Schnittstelle:
*"       IMPORTING
*"             VALUE(INPUT)
*"       EXPORTING
*"             VALUE(OUTPUT)
OUTPUT = SAVE_INPUT(1) = INPUT.
CHECK SAVE_INPUT(1) NA ' *'.
SELECT SINGLE * FROM T002 WHERE SPRAS = INPUT.
CHECK SY-SUBRC = 0.
OUTPUT = T002-LAISO.
ENDFUNCTION.
Original programme
REPORT zrsffl0a.
TABLES: apqi, sflight.
DATA: BEGIN OF BDC_TAB OCCURS 50.
INCLUDE STRUCTURE BDCDATA.
DATA END OF BDC_TAB.
PARAMETERS:
    name LIKE apqi-groupid DEFAULT SY-UNAME,
    carrid LIKE sflight-carrid DEFAULT 'AA',
    connid LIKE sflight-connid DEFAULT '0064',
    plane LIKE sflight-planetype DEFAULT 'A310-200'.
START-OF-SELECTION.
WRITE: / 'Top creation of a session BDC',
sy-mandt, name, sy-uzeit.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING: CLIENT = sy-mandt,
           GROUP = name,
           USER = sy-uname,
           KEEP = 'X'.
PERFORM GENERATE_BDC_DATA.
CALL FUNCTION 'BDC_INSERT'
EXPORTING TCODE = 'ZTCF2'
    TABLES DYNPROTAB = BDC_TAB.
CALL FUNCTION 'BDC_CLOSE_GROUP'.
WRITE: / 'End creation of a session BDC',
sy-mandt, name, sy-uzeit.
*&      Form GENERATE_BDC_DATA
      text
--> p1        text
<-- p2        text
form GENERATE_BDC_DATA .
REFRESH BDC_TAB.
CLEAR BDC_TAB.
MOVE: 'ZRSFFL03A' TO BDC_TAB-PROGRAM,
      100 TO BDC_TAB-DYNPRO,
      'X' TO BDC_TAB-DYNBEGIN.
APPEND BDC_TAB.
CLEAR BDC_TAB.
MOVE: NAME TO BDC_TAB-FNAM,
      SY-UNAME TO BDC_TAB-FVAL.
APPEND BDC_TAB.
CLEAR BDC_TAB.
MOVE: carrid TO BDC_TAB-FNAM,
      'AA' TO BDC_TAB-FVAL.
APPEND BDC_TAB.
CLEAR BDC_TAB.
MOVE: connid TO BDC_TAB-FNAM,
      '0064' TO BDC_TAB-FVAL.
APPEND BDC_TAB.
CLEAR BDC_TAB.
MOVE: plane TO BDC_TAB-FNAM,
      'A310-200' TO BDC_TAB-FVAL.
APPEND BDC_TAB.
CLEAR BDC_TAB.
endform.                    " GENERATE_BDC_DATA
I thank those who will give me suggestions and / or explanations.
Best regards
Claudia

I forgot my user name & password for Firefox Sync 1.3.1

I set up Firefox Sync 1.3.1 on my main PC, but when I tried to sync a laptop (some days later), I couldn't remember/find the user name & password fort Sync. How can I recover them?
== This happened ==
Just once or twice
== as above

You can see the Sync password and secret Sync key in the password manager on the computer where you first created that sync account.
Look for these names:
*chrome://weave (Mozilla Services Password)
*chrome://weave (Mozilla Services Encryption Passphrase)

User name & password for oracle designer 2000

Hi,
I have downloaded the oracle designer 2000 from oracle . I need user name & password to enter the screen. If anyone knows pl. help me

The username and password you are looking for is that of the Database you are connecting to. I.e. where you have installed the designer repository.
If you have not installed the repository, follow the instruction to create the oracle user (repository owner), install the designer repository and use it to login.
The best thing will be to download the documentation the way you downloaded the software. It is important

User Name & Password for Deskjet J4580 - to print from Ipad via AirPrint

Was able to install the airprint driver on computer. My Ipad sees my printer but asks me for "user name" and "password" for HP Officejet j4500 series @ zeus". I have tried all kind of passwords and it will not accept. Wondering how I can either obtain user name andpassword or reset them for my printer.

Well, this is strange because this printer does not support AirPrint. Maybe that is the problem altogether.
I have no idea about the user name and password, it should not have them.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

User name,password for 10g

Hey i downloaded the "Oracle Databese 10g Release 2 (10.2.0.1.0) for Microsoft Windows".
durin the download and installation i nevr specified any user name or passwd or host string.
when i open SQL Plus it asks for my user name ,pwd and host string.
i tried the folowing combinations and it didnt wrk for any of them
user name/pwd:scott/tiger,sys/sys,system/system,admin/admin.
i really need to wrk over oracle as i have to complete my project. and i have only one sem left.
it will b so kind of u if u can provide me with the user id, pwd and host string
ur co-operation will b greatly appreciated.
With regards
Aamir suhail
alternate e-mail: [email protected]

Goto oracle database configuration assnt and create a db. During db it creation it will prompt u for pwd and u can set at tht point. By dafult oracle pwd's are
sys/change_on_install
system/manager
scott/tiger
Regards,
http://askyogesh.com

User name error For Excel Analyzer

Similar Messages

Maybe you are looking for