USER or BADI Exit In MRP List to Sort
i want to sort with our logic MRP Status "Z" list when i run with "Regen. Planning".
Are there any USER or BADI Exit that you know.
We have Cable Solution Module and i tried J_2CMRPA exit. but it doesnt work for me.
thanks a lot
ibrahim
Message was edited by: Ibrahim UGUR
Dear Ayethebing,
First things first, you don't have to be sorry to me. I am here to learn, so a part of my learning involves questioning.
Hence i questioned the rationale behind suggesting the method -> CHANGE_MDPSX_MARD, as this method helps in manipulating stocks & not for including / excluding a material of a particular valuation type. Atleast that is what i infer from the requestor's initial posting.
Below is a Ctrl C, Ctrl V of SAP help for the method:
- For storage locations in which the stock is planned along with the plant stock, you can change the plant stock quantity. All storage location data on the material is available for these storage locations.
- For storage locations where the stock does not go into MRP, you cannot change the stock quantity for the individual storage locations.
- For storage locations in which the stock is planned separately, you can change the stock quantity for the individual storage locations.
Regards,
Vivek
Similar Messages
-
Hi Experts,
Can anyone guide me on how to activate the User Exit for MRP Run. T.Code MD01.
What are the exits that are to be activated.
Thanks
Ashok.NHi
Hope it will help you.
*reward if help.*
User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a function module. The code for the function module is written by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
The naming standard of function modules for functionmodule exits is:
EXIT_<program name><3 digit suffix>
The call to a functionmodule exit is implemented as:
CALL CUSTOMER.-FUNCTION <3 digit suffix>
To find a Exit.
Goto Transaction -- Find The Package
SMOD >f4>Use the Package here to Find the Exits In the Package.
Else if you Want to search by Application Area wise ,
There is one more tab to find the Exits in the Respective Application Area.
Implementing the Exit-- CMOD Create ProjectsAssgn your Component .
Now Run ur Transaction to Check if it Triggers.
Thats it..
Suppose you need to find out all the user exits related to a tcode.
1. Execute the Tcode.
2. Open the SAP program.
3. Get the Development Class.
4. Execute Tcode SE84.
5. Open the Node 'Envir. -> Exit Techniques -> 'Customer Exits -> Enhancements'
6. Enter the Development class and execute.
Check out this thread..
The specified item was not found.
1. Type the transaction : system->status-> <PROG. NAME>
2 open SE37 , type EXIT<PROG NAME> and press F4 to get the list of function exits available.
3. Open CMOD utilities->SAP enhancements
EDIT->All selections
4.type the function module name obtained in step 2, in fields 'component name' in 'additional selections' block. and execute.
5. The displayed list contains the enhancements names for the transaction You were looking for.
6. Create a project in CMOD and the code in default include->activate.
http://www.erpgenie.com/sap/abap/code/abap26.htm
which gives the list of exits for a tcode
http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec079f5db911d295ae0000e82de14a/frameset.htm
For information on Exits, check these links
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.planetsap.com/userexit_main_page.htm
User-Exits
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/ab038.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.sap-basis-abap.com/sapab013.htm
http://sap.ittoolbox.com/documents/popular-q-and-a/user-exits-for-the-transaction-code-migo-3283
These links will help you to learn more on user exits.
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.allsaplinks.com/user_exit.html
www.sap-img.com/abap/what-is-user-exits.htm
Also please check these threads for more details about user exits.
Re: Screen exit
user exit and customer exit
user exit
1. Document on UserExits in FI/CO
http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
2. Finding User Exits...
http://sap.ionelburlacu.ro/abap/sap2/Other_Useful_Tips.html#Finding_User_Exits
3. List of all User Exits...
http://www.planetsap.com/userexit_main_page.htm -
We are using gross req. planning.As per standard logic system will not consider storage location stock and only planned receipts/issues are considered.
Can i restrict using any exit or badi not to consider planned receipts/issues while running MRP. please let me know the exit name.HI,
Pls go through the following path to get the desired BADI for MRP:
Go to -
> SMOD-> Press F4 ( Application Help)->Select SAP Applications--> Select PP-> PP-MRP
Now you can find list of all Enhancements / Exit / BADI's for MRP.
Hope this helps.
Regards,
Tejas -
Badi/exit/Workflow called during execution of the BSP "SRMSUS_SELFREG"
Hi all,
We are running on SRM 5.0.(SP06) Strategic sourcing scenario.We are using enterprise Portal as the front end.My query is that at the end of Supplier registration process,when the Supplier admin creates the USER ID's for the Suppliers(through BSP SRMSUS_SELFREG),is there any way by which we can create the enterprise Portal users for those suppliers at the same time(Automation) ?My BASIS person told me that the automation is possible when the EP system is connected only to 1 backend but in our landscape we are having several systems connected to EP.
Other alternative would be to send a mail to the EP administrator stating that the Vendors User ID's have been created in SRM and the EP ID's need to be created.
For this ,i didnt get any BADi/exit which gets triggered during this USER ID creation process wherein i can write my logic for sending the mail to the EP admin.
There are some Std workflows (e.g. WS10000209)for USER creation but these dont seem to be useful in this scenario.
So the only method left is to modify the Std BSP which we dont want.Has anybody worked on this kind of scenario?
Any suggestions are welcome and will be rewarded as well.
BR,
Disha.Hi
I am still searching.. but no BADI/Exit is called in this case..
<u>Meanwhile, i found few SAP OSS notes, which you can go through -></u>
Note 1031896 Delimiting of Supplier Reg URL due to Special characters
Note 1031070 Supplier cannot be registered
Note 996030 Need to relogin to srmsus_selfreg service when using aliases
Note 1032573 FormofAddr field mandatory in userselfreg.htm page
Note 1003820 Supplier cannot be registered
Note 889451 Not Possible to register in Supplier self-registration
Note 807511 Error message after self registration of supplier admin user
Note 784883 Irrelevant warning message stops self registration
Do let me know.
Regards
- Atul -
Any standarad badi exits for tranction for bp ie in crm
any standarad badi exits for chnaging or writing code in sap-crm standard tranction bp(busness patner) tr code is bp
hello,
BP is BDT (Business Data toolset) enabled (you can check it by adding break point in FM BUS_PBO and executing BP transaction). You can add your check directly to standard view (the check will be executed each time when user pushes enter) or you could add you check to appropriate action (during saving etc.) there are number of actions which you could use it depends on your requirements. You can find a lot of info about BDT (if you are not familiar) in Wiki.
br,
dez_ -
BADI/EXIT for changing line items (F-02)
Hi All,
I want to know any BADIs/EXITs which allow changing of G/L line items in transaction f-02. I have tried substitution it does not work for my requirement.
My requirement is copying of PRCTR from offset line item to the Vendor/customer line item which always appears as line item 001.
Thanks,
Preetham SF050S001 FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002 FIDCC1: Change IDoc/do not send
F050S003 FIDCC2: Change IDoc/do not send
F050S004 FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005 FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006 FI Outgoing IDoc: Reset Clearing in FI Document
F050S007 FIDCCH Outbound: Influence on IDoc for Document Change
F180A001 Balance Sheet Adjustment
FARC0002 Additional Checks for Archiving MM Vendor Master Data
FEDI0001 Function Exits for EDI in FI
RFAVIS01 Customer Exit for Changing Payment Advice Segment Text
RFEPOS00 Line item display: Checking of selection conditions
RFKORIEX Automatic correspondence
SAPLF051 Workflow for FI (pre-capture, release for payment) -
Enhancement pt /badi/exit to restrict Creation/edition of Note txt (STXH)
Hi All,
I am trying to restrict creation/edition of Note(text) in PA30 for qualification(infotype 024) . The BADI(HRBAS00INFTY) which triggers when the qualification is changed , is NOT having any data in old_image and New_image when Notes are changed .
Any info on how to restrict enhancement point /badi/exit for this will be very helpful .
Thank you in advance
Brajesh .No user exits or badis are available to control the transactions or master data long texts. It is only available for SO10 texts (Standard Text). I have read this somewhere in the SAP Notes.
-
BADI/EXIT for FB60 Save document
Hi All,
I need to perform certain custom checks and save custom date in FB60 transaction.
Please let me know the BADI/EXIT for header check and save document badis in FB60 transaction.
Thanks and Regards,
VijayHi,
Could any of these exits be useful for you..??
F050S001 FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002 FIDCC1: Change IDoc/do not send
F050S003 FIDCC2: Change IDoc/do not send
F050S004 FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005 FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006 FI Outgoing IDoc: Reset Clearing in FI Document
F050S007 FIDCCH Outbound: Influence on IDoc for Document Change
F180A001 Balance Sheet Adjustment
FARC0002 Additional Checks for Archiving MM Vendor Master Data
RFAVIS01 Customer Exit for Changing Payment Advice Segment Text
RFEPOS00 Line item display: Checking of selection conditions
RFKORIEX Automatic correspondence
SAPLF051 Workflow for FI (pre-capture, release for payment)
Thanks -
Need a BADI/ exit for MIGO transaction
Hi,
I need a BADI / exit for tha transaction MIGO. My requirement is before displaying the materials in the item tab, check whether the user has authorization for that material or not. If he has no authorization, give error message. This should be done for all types of documents.
Please let me know if you need more information.
thanks,
Kishorehi,
You can have the authorization for the inventory management via authorisation..
Check the path: SPRO --> MM --> Purchasing --> Inv. management nad physical inventory --> Authorization management --> Maintain roles and assign users....
Regards
Priyanka.P -
Hello Everyone,
How r u guys? I need some help in BADI/User Exit. I am working on FI - CFM. There is a transaction with TCode- TS01 (Create Securities) / TS04 (settle securities).
I need a BADI/Exit which gets activated when the user clicks on the save button. I tried to locate them but couldnt find anything suitable. I emailed sap and they told me that there is a BADI - FTR_CUSTOMER_EXTENT which I
could use to solve my problem. I did try that and wrote a code in that badi;s EVT_TRANSACTION_SAVE_CHECK method.
But unfortunately when i clicked on save button the badi didnt run. I am in a fix as to what do I do ? The system I am working on is a bit old its SAP R3 4.7C. In that I created a Z badi implementation and embeded the original
badi definition and wrote code and activated everything.
Either the badi I am using (which sap guys told) isnt correct or something. Can anyone guide me as to whats the next step.
Thanks,
JGHi,
To add a new custom tab in TM_XX transactions you have to follow these steps:
1. (SE80) Create a dynpro as SUBSCREEN, with the structure (fields, tablecontrols...) you want in the new tab, located in a modul-pool.
Example: Program: ZCFM001
Dynpro: 1010
2. (SE18) Create your custom implementation of BADI FTR_CUSTOMER_EXTENT. This will create a Z class where you can program the new tab management.
Example: Implementation: ZAMPLIACIOTM001
Class: ZCL_IM_AMPLIACIOTM001
3. (SE24) Implement method EVT_APPLICATION_START of your new class. This method is called when the transaction is going to be painted, and manages (among other things) which tabs need to be shown. In general terms, you will have to assign your dynpro to a function code.
This BADI offers you 2 custom function codes, and so, the ability to add two custom tabs. These function codes are OPEN_TRTM_CUST_01 and OPEN_TRTM_CUST_02.
To add your dynpro to a function code, you have to identify this relationship in the internal table (parameter) PC_TAB_BADI_TABS. This is the table that contains the custom tabs to be added.
To do this, you have to add the following piece of code:
DATA: LS_BADI_TABS TYPE FTROP_BADI_SUBSCREEN.
4.1. Modify the tab structure.
LS_BADI_TABS-REPID = ZCFM001. "Report
LS_BADI_TABS-TEXT_TAB = 'New Tab'. "Text (max. 30 CHAR) to display
LS_BADI_TABS-DYNNR = '1010'. "Subscreen
4.2. Add the new tab.
MODIFY PC_TAB_BADI_TABS
FROM LS_BADI_TABS
TRANSPORTING REPID DYNNR TEXT_TAB
WHERE FCODE = 'OPEN_TRTM_CUST_01'.
And that's it! Now you will be able to see you new tab in these transactions.
I hope this helps you.
<b>Reward points</b>
Regards -
Dear All,
I am facing a unique problem in Trx MD05. Actually I run MRP through MDBT Trx on 01.07.09 but in MRP list (MD05) It is showing MRP list as of 03.07.09. How this can be possible?
Please share your views on this
Thanks & Regards
Kundan KumarHi Kundan,
STAD to trace combination of User and Tcode, but particular material its diffcult to trace in std sap.
If you want to trace then you need do some enhancements, create customized table (mateial number, plant, date, time, etc) for when user run the mrp in MD02 then save all data's to your own table.
I hope this will help to you
Regards,
Sankaran -
User and screen exit for BP transaction
Hi,
We need to add a few z-fields to BP (Business Partner) address tab and save data into database. Please let me know if any user or screen exits are available.
Thank you.hi
use this program to get all the relevant enhancement and based on that ....use the relevant one and write ur piece of code..
& Report ZPJA_PM002 (V2) &
& Text Elements: &
& P_DEVC Show user-exits from development class &
& P_LIMIT Limit submit program selection &
& P_FUNC Show function modules &
& P_SUBM Show submit programs &
& S01 Selection data (TCode takes precedence over program name) &
report zpja_pm002
no standard page heading
line-size 158.
*tables: enlfdir. "Additional Attributes for Function Modules
data: tabix like sy-tabix,
w_linnum type i,
w_off type i,
w_index like sy-tabix,
w_include like trdir-name,
w_prog like trdir-name,
w_incl like trdir-name,
w_area like rs38l-area,
w_level,
w_str(50) type c,
w_funcname like tfdir-funcname.
constants: c_fmod(40) type c value 'Function modules selected: ',
c_subm(40) type c value 'Submit programs selected: ',
c_col1(12) type c value 'Enhanmt Type',
c_col2(40) type c value 'Enhancement',
c_col3(30) type c value 'Program/Include',
c_col4(20) type c value 'Enhancement Name',
c_col5(40) type c value 'Enhancement Description'.
Work Areas: ABAP Workbench
data: begin of wa_d010inc.
data: master type d010inc-master.
data: end of wa_d010inc.
data: begin of wa_tfdir.
data: funcname type tfdir-funcname,
pname type tfdir-pname,
include type tfdir-include.
data: end of wa_tfdir.
data: begin of wa_tadir.
data: devclass type tadir-devclass.
data: end of wa_tadir.
data: begin of wa_tstc.
data: pgmna type tstc-pgmna.
data: end of wa_tstc.
data: begin of wa_tstcp.
data: param type tstcp-param.
data: end of wa_tstcp.
data: begin of wa_enlfdir.
data: area type enlfdir-area.
data: end of wa_enlfdir.
Work Areas: BADIs
data: begin of wa_sxs_attr.
data: exit_name type sxs_attr-exit_name.
data: end of wa_sxs_attr.
data: begin of wa_sxs_attrt.
data: text type sxs_attrt-text.
data: end of wa_sxs_attrt.
Work Areas: Enhancements
data: begin of wa_modsap.
data: member type modsap-member.
data: end of wa_modsap.
data: begin of wa_modsapa.
data: name type modsapa-name.
data: end of wa_modsapa.
data: begin of wa_modsapt.
data: modtext type modsapt-modtext.
data: end of wa_modsapt.
Work Areas: Business Transaction Events
data: begin of wa_tbe01t.
data: text1 type tbe01t-text1.
data: end of wa_tbe01t.
data: begin of wa_tps01t.
data: text1 type tps01t-text1.
data: end of wa_tps01t.
user-exits
types: begin of t_userexit,
type(12) type c,
pname like trdir-name,
txt(300),
level type c,
modname(30) type c,
modtext(40) type c,
end of t_userexit.
data: i_userexit type standard table of t_userexit with header line.
Function module developmnet classes
types: begin of t_devclass,
clas like trdir-clas,
end of t_devclass.
data: i_devclass type standard table of t_devclass with header line.
Submit programs
types: begin of t_submit,
pname like trdir-name,
level,
done,
end of t_submit.
data: i_submit type standard table of t_submit with header line.
Source code
types: begin of t_sourcetab, "#EC * (SLIN lügt!)
line(200), "#EC * (SLIN lügt!)
end of t_sourcetab. "#EC * (SLIN lügt!)
data: sourcetab type standard table of t_sourcetab with header line.
data c_overflow(30000) type c.
Description of an ABAP/4 source analysis token
data: i_stoken type standard table of stokex with header line.
data wa_stoken like i_stoken.
Description of an ABAP/4 source analysis statement
data: i_sstmnt type standard table of sstmnt with header line."#EC
keywords for searching ABAP code
types: begin of t_keywords,
word(30),
end of t_keywords.
data: keywords type standard table of t_keywords with header line.
function modules within program
types: begin of t_fmodule,
name like rs38l-name,
pname like trdir-name,
pname2 like trdir-name,
level,
bapi,
done,
end of t_fmodule.
data: i_fmodule type standard table of t_fmodule with header line.
& Selection Options &
selection-screen begin of block selscr1 with frame title text-s01.
parameter: p_pname like trdir-name memory id rid,
p_tcode like syst-tcode,
p_limit(4) type n default 100,
p_devc like rihea-dy_ofn default ' ',
p_func like rihea-dy_ofn default ' ',
p_subm like rihea-dy_ofn default ' '.
selection-screen end of block selscr1.
& START-OF-SELECTION &
start-of-selection.
if p_pname is initial and p_tcode is initial.
message e008(hrfpm). "Make entry on the selection screen
stop.
endif.
ensure P_LIMIT is not zero.
if p_limit = 0.
p_limit = 1.
endif.
perform data_select.
perform get_submit_data.
perform get_fm_data.
perform get_additional_data.
perform data_display.
& Form DATA_SELECT &
form data_select.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get programs/includes' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
determine search words
keywords-word = 'CALL'.
append keywords.
keywords-word = 'FORM'.
append keywords.
keywords-word = 'PERFORM'.
append keywords.
keywords-word = 'SUBMIT'.
append keywords.
keywords-word = 'INCLUDE'.
append keywords.
if not p_tcode is initial.
get program name from TCode
select single pgmna from tstc into wa_tstc-pgmna
where tcode eq p_tcode.
if not wa_tstc-pgmna is initial.
p_pname = wa_tstc-pgmna.
TCode does not include program name, but does have refereve TCode
else.
select single param from tstcp into wa_tstcp-param
where tcode eq p_tcode.
if sy-subrc = 0.
check wa_tstcp-param(1) = '/'.
check wa_tstcp-param+1(1) = '*'.
if wa_tstcp-param ca ' '.
endif.
w_off = sy-fdpos + 1.
subtract 2 from sy-fdpos.
if sy-fdpos gt 0.
p_tcode = wa_tstcp-param+2(sy-fdpos).
endif.
select single pgmna from tstc into wa_tstc-pgmna
where tcode eq p_tcode.
p_pname = wa_tstc-pgmna.
if sy-subrc <> 0.
message e110(/saptrx/asc) with 'No program found for: '
p_tcode."#EC NOTEXT
stop.
endif.
else.
message e110(/saptrx/asc) with 'No program found for: ' p_tcode.
"#EC NOTEXT
stop.
endif.
endif.
endif.
Call customer-function aus Program coding
read report p_pname into sourcetab.
if sy-subrc > 0.
message e017(enhancement) with p_pname raising no_program."#EC *
endif.
scan abap-source sourcetab tokens into i_stoken
statements into i_sstmnt
keywords from keywords
overflow into c_overflow
with includes.
WITH ANALYSIS.
if sy-subrc > 0. "keine/syntakt. falsche Ablauflog./Fehler im Skanner
message e130(enhancement) raising syntax_error. "#EC *
endif.
check I_STOKEN for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
w_level = '0'.
w_prog = ''.
w_incl = ''.
perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endform. "DATA_SELECT
& Form GET_FM_DATA &
form get_fm_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get function module data' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
Function module data
sort i_fmodule by name.
delete adjacent duplicates from i_fmodule comparing name.
loop at i_fmodule where done ne 'X'.
clear: i_stoken, i_sstmnt, sourcetab, wa_tfdir, w_include .
refresh: i_stoken, i_sstmnt, sourcetab.
clear wa_tfdir.
select single funcname pname include from tfdir into wa_tfdir
where funcname = i_fmodule-name.
check sy-subrc = 0.
call function 'FUNCTION_INCLUDE_SPLIT'
exporting
program = wa_tfdir-pname
importing
group = w_area.
concatenate 'L' w_area 'U' wa_tfdir-include into w_include.
i_fmodule-pname = w_include.
i_fmodule-pname2 = wa_tfdir-pname.
modify i_fmodule.
read report i_fmodule-pname into sourcetab.
if sy-subrc = 0.
scan abap-source sourcetab tokens into i_stoken
statements into i_sstmnt
keywords from keywords
with includes.
if sy-subrc > 0.
message e130(enhancement) raising syntax_error.
endif.
check i_stoken for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
w_level = '1'.
w_prog = i_fmodule-pname2.
w_incl = i_fmodule-pname.
perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endif.
endloop.
if p_devc = 'X'.
loop at i_fmodule.
clear: wa_tadir, wa_enlfdir.
select single area from enlfdir into wa_enlfdir-area
where funcname = i_fmodule-name.
check not wa_enlfdir-area is initial.
select single devclass into wa_tadir-devclass
from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = wa_enlfdir-area.
check not wa_tadir-devclass is initial.
move wa_tadir-devclass to i_devclass-clas.
append i_devclass.
i_fmodule-done = 'X'.
modify i_fmodule.
endloop.
sort i_devclass.
delete adjacent duplicates from i_devclass.
endif.
endform. "GET_FM_DATA
& Form GET_SUBMIT_DATA &
form get_submit_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get submit data' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
sort i_submit.
delete adjacent duplicates from i_submit comparing pname.
w_level = '0'.
loop at i_submit where done ne 'X'.
clear: i_stoken, i_sstmnt, sourcetab.
refresh: i_stoken, i_sstmnt, sourcetab.
read report i_submit-pname into sourcetab.
if sy-subrc = 0.
scan abap-source sourcetab tokens into i_stoken
statements into i_sstmnt
keywords from keywords
with includes.
if sy-subrc > 0.
message e130(enhancement) raising syntax_error.
continue.
endif.
check i_stoken for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
w_prog = i_submit-pname.
w_incl = ''.
perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endif.
restrict number of submit program selected for processing
describe table i_submit lines w_linnum.
if w_linnum ge p_limit.
w_level = '1'.
endif.
i_submit-done = 'X'.
modify i_submit.
endloop.
endform. "GET_SUBMIT_DATA
& Form DATA_SEARCH &
form data_search tables p_stoken structure stoken
using p_level p_prog p_incl.
loop at p_stoken.
clear i_userexit.
tabix = sy-tabix + 1.
i_userexit-level = p_level.
if i_userexit-level = '0'.
if p_incl is initial.
i_userexit-pname = p_pname.
else.
concatenate p_pname '/' p_incl into i_userexit-pname.
endif.
else.
if p_incl is initial.
i_userexit-pname = p_prog.
else.
concatenate p_prog '/' p_incl into i_userexit-pname.
endif.
endif.
Include
if p_stoken-str eq 'INCLUDE'.
check p_level eq '0'. " do not perform for function modules
*(2nd pass)
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
check not wa_stoken-str cs 'STRUCTURE'.
check not wa_stoken-str cs 'SYMBOL'.
read table i_submit with key pname = wa_stoken-str.
if sy-subrc <> 0.
i_submit-pname = wa_stoken-str.
i_submit-level = p_level.
append i_submit.
endif.
endif.
Enhancements
if p_stoken-str eq 'CUSTOMER-FUNCTION'.
clear w_funcname.
read table p_stoken index tabix.
translate p_stoken-str using ''' '.
condense p_stoken-str.
if p_prog is initial.
concatenate 'EXIT' p_pname p_stoken-str into w_funcname
separated by '_'.
else.
concatenate 'EXIT' p_prog p_stoken-str into w_funcname
separated by '_'.
endif.
select single member from modsap into wa_modsap-member
where member = w_funcname.
if sy-subrc = 0. " check for valid enhancement
i_userexit-type = 'Enhancement'.
i_userexit-txt = w_funcname.
append i_userexit.
else.
clear wa_d010inc.
select single master into wa_d010inc-master
from d010inc
where include = p_prog.
concatenate 'EXIT' wa_d010inc-master p_stoken-str into
w_funcname
separated by '_'.
i_userexit-type = 'Enhancement'.
i_userexit-txt = w_funcname.
endif.
endif.
BADIs
if p_stoken-str cs 'cl_exithandler='.
w_index = sy-tabix + 4.
read table p_stoken index w_index into wa_stoken.
i_userexit-txt = wa_stoken-str.
replace all occurrences of '''' in i_userexit-txt with space.
i_userexit-type = 'BADI'.
append i_userexit.
endif.
Business transaction events
if p_stoken-str cs 'OPEN_FI_PERFORM'.
i_userexit-type = 'BusTrEvent'.
i_userexit-txt = p_stoken-str.
replace all occurrences of '''' in i_userexit-txt with space.
i_userexit-modname = i_userexit-txt+16(8).
case i_userexit-txt+25(1).
when 'E'.
clear wa_tbe01t.
select single text1 into wa_tbe01t-text1 from tbe01t
where event = i_userexit-txt+16(8)
and spras = sy-langu.
if wa_tbe01t-text1 is initial.
i_userexit-modtext = ''. "#EC NOTEXT
else.
i_userexit-modtext = wa_tbe01t-text1.
endif.
i_userexit-modname+8 = '/P&S'. "#EC NOTEXT
when 'P'.
clear wa_tps01t.
select single text1 into wa_tps01t-text1 from tps01t
where procs = i_userexit-txt+16(8)
and spras = sy-langu.
i_userexit-modtext = wa_tps01t-text1.
i_userexit-modname+8 = '/Process'.
endcase.
append i_userexit.
endif.
Program exits
if p_stoken-str cs 'USEREXIT_'.
i_userexit-type = 'Program Exit'.
i_userexit-txt = p_stoken-str.
replace all occurrences of '''' in i_userexit-txt with space.
append i_userexit.
endif.
Submit programs
if p_stoken-str cs 'SUBMIT'.
check p_level eq '0'. " do not perform for function modules
*(2nd pass)
check not p_stoken-str cs '_'. " ensure not SUBMIT_XXX
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
check not wa_stoken-str cs '_'. " ensure not SUBMIT_XXX
replace all occurrences of '''' in wa_stoken-str with space.
read table i_submit with key pname = wa_stoken-str.
if sy-subrc <> 0.
i_submit-pname = wa_stoken-str.
i_submit-level = p_level.
append i_submit.
endif.
endif.
Perform routines (which reference external programs)
if p_stoken-str cs 'PERFORM'.
check p_level eq '0'. " do not perform for function modules
*(2nd pass)
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
if not wa_stoken-ovfl is initial.
w_off = wa_stoken-off1 + 10.
w_str = c_overflow+w_off(30).
find ')' in w_str match offset w_off.
w_off = w_off + 1.
wa_stoken-str = w_str(w_off).
endif.
check wa_stoken-str cs '('.
w_off = 0.
while sy-subrc = 0.
if wa_stoken-str+w_off(1) eq '('.
replace section offset w_off length 1 of wa_stoken-str with ''
replace all occurrences of ')' in wa_stoken-str with space.
read table i_submit with key pname = wa_stoken-str.
if sy-subrc <> 0.
i_submit-pname = wa_stoken-str.
append i_submit.
endif.
exit.
else.
replace section offset w_off length 1 of wa_stoken-str with ''
shift wa_stoken-str left deleting leading space.
endif.
endwhile.
endif.
Function modules
if p_stoken-str cs 'FUNCTION'.
clear i_fmodule.
check p_level eq '0'. " do not perform for function modules
*(2nd pass)
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
if wa_stoken-str cs 'WF_'.
if wa_stoken-str cs 'IF_'.
break-point.
endif.
if wa_stoken-str cs 'BAPI'.
i_fmodule-bapi = 'X'.
endif.
replace first occurrence of '''' in wa_stoken-str with space.
replace first occurrence of '''' in wa_stoken-str with space.
if sy-subrc = 4. " didn't find 2nd quote (ie name truncated)
clear wa_tfdir.
concatenate wa_stoken-str '%' into wa_stoken-str.
select single funcname into wa_tfdir-funcname from tfdir
where funcname like wa_stoken-str.
if sy-subrc = 0.
i_fmodule-name = wa_tfdir-funcname.
else.
continue.
endif.
else.
i_fmodule-name = wa_stoken-str.
endif.
i_fmodule-level = p_level.
append i_fmodule.
endif.
endloop.
endform. "DATA_SEARCH
& Form GET_ADDITIONAL_DATA &
form get_additional_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get additional data' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
loop at i_userexit.
Enhancement data
if i_userexit-type cs 'Enh'.
clear: wa_modsapa.
select single name into wa_modsapa-name from modsap
where member = i_userexit-txt.
check sy-subrc = 0.
i_userexit-modname = wa_modsapa-name.
clear wa_modsapt.
select single modtext into wa_modsapt-modtext from modsapt
where name = wa_modsapa-name
and sprsl = sy-langu.
i_userexit-modtext = wa_modsapt-modtext.
endif.
BADI data
if i_userexit-type eq 'BADI'.
clear wa_sxs_attr.
select single exit_name into wa_sxs_attr-exit_name from sxs_attr
where exit_name = i_userexit-txt.
if sy-subrc = 0.
i_userexit-modname = i_userexit-txt.
else.
i_userexit-modname = 'Dynamic call'. "#EC NOTEXT
endif.
clear wa_sxs_attrt.
select single text into wa_sxs_attrt-text from sxs_attrt
where exit_name =
wa_sxs_attr-exit_name
and sprsl = sy-langu.
i_userexit-modtext = wa_sxs_attrt-text.
endif.
modify i_userexit.
endloop.
get enhancements via program package
clear wa_tadir.
select single devclass into wa_tadir-devclass from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = p_pname.
if sy-subrc = 0.
clear: wa_modsapa, wa_modsapt.
select name from modsapa into wa_modsapa-name
where devclass = wa_tadir-devclass.
select single modtext from modsapt into wa_modsapt-modtext
where name = wa_modsapa-name
and sprsl = sy-langu.
read table i_userexit with key modname = wa_modsapa-name.
if sy-subrc <> 0.
i_userexit-modtext = wa_modsapt-modtext.
i_userexit-type = 'Enhancement'. "#EC NOTEXT
i_userexit-modname = wa_modsapa-name.
i_userexit-txt = 'Determined from program DevClass'."#EC NOTEXT
i_userexit-pname = 'Unknown'. "#EC NOTEXT
append i_userexit.
endif.
endselect.
endif.
endform. "GET_ADDITIONAL_DATA
& Form DATA_DISPLAY &
form data_display.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Prepare screen for display' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
sort i_userexit by type txt modname.
delete adjacent duplicates from i_userexit comparing txt modname.
format headings
write: 'Enhancements from main program'. "#EC NOTEXT
write: /.
uline.
format color col_heading.
write: / sy-vline,
(12) c_col1, "Enhanmt Type
sy-vline,
(40) c_col2, "Enhancement
sy-vline,
(30) c_col3, "Program/Include
sy-vline,
(20) c_col4, "Enhancement name
sy-vline,
(40) c_col5, "Enhancement description
sy-vline.
format reset.
uline.
format lines
loop at i_userexit.
set line colour
case i_userexit-type.
when 'Enhancement'.
format color 3 intensified off.
when 'BADI'.
format color 4 intensified off.
when 'BusTrEvent'.
format color 5 intensified off.
when 'Program Exit'.
format color 6 intensified off.
when others.
format reset.
endcase.
write: / sy-vline,
i_userexit-type,
sy-vline,
i_userexit-txt(40),
sy-vline,
i_userexit-pname(30),
sy-vline,
i_userexit-modname(20),
sy-vline,
i_userexit-modtext(40),
sy-vline.
endloop.
format reset.
uline.
user-exits from development class of function modules
if p_devc = 'X'.
write: /.
write: / 'User-exits from function module development class'."#EC
*NOTEXT
write: 157''.
uline (90).
write: 157''.
loop at i_devclass.
clear wa_modsapa.
select name from modsapa into wa_modsapa
where devclass = i_devclass-clas.
select single name modtext into corresponding fields of wa_modsapt
from modsapt
where name = wa_modsapa-name
and sprsl = sy-langu.
format color 3 intensified off.
write: / sy-vline,
(12) 'Enhancement',
sy-vline,
wa_modsapa-name,
sy-vline,
wa_modsapt-modtext,
sy-vline.
endselect.
endloop.
uline (90).
format reset.
endif.
describe table i_fmodule lines w_linnum.
write: / c_fmod , at 35 w_linnum. "#EC NOTEXT
write: 157''.
if p_func = 'X'.
display fuction modules used in program
uline (38).
write: 157''.
loop at i_fmodule.
write: sy-vline,
i_fmodule-name,
sy-vline,
i_fmodule-bapi,
sy-vline.
write: 157''.
endloop.
uline (38).
endif.
describe table i_submit lines w_linnum.
write: / c_subm , at 35 w_linnum. "#EC NOTEXT
write: 157''.
if p_subm = 'X'.
display submit programs used in program
uline (44).
write: 157''.
loop at i_submit.
write: sy-vline,
i_submit-pname,
sy-vline.
write: 157''.
endloop.
uline (44).
endif.
issue message with number of user-exits displayed
describe table i_userexit lines w_linnum.
message s697(56) with w_linnum.
endform. "DATA_DISPLAY
reward points if it helps
gunjan -
Difference between user exists&badi's
difference between user exists&badi's
Hi, this may help you.
Check this link to learn more about differences between user-exits and badis:
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
Difference Between BADI and User Exits
Business Add-Ins are a new SAP enhancement technique based on ABAP Objects. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software.
As with customer exits two different views are available:
In the definition view, an application programmer predefines exit points in a source that allow specific industry sectors, partners, and customers to attach additional software to standard SAP source code without having to modify the original object.
In the implementation view, the users of Business Add-Ins can customize the logic they need or use a standard logic if one is available.
In contrast to customer exits, Business Add-Ins no longer assume a two-level infrastructure (SAP and customer solutions), but instead allow for a multi-level system landscape (SAP, partner, and customer solutions, as well as country versions, industry solutions, and the like). Definitions and implementations of Business Add-Ins can be created at each level within such a system infrastructure.
SAP guarantees the upward compatibility of all Business Add-In interfaces. Release upgrades do not affect enhancement calls from within the standard software nor do they affect the validity of call interfaces. You do not have to register Business Add-Ins in SSCR.
The Business Add-In enhancement technique differentiates between enhancements that can only be implemented once and enhancements that can be used actively by any number of customers at the same time. In addition, Business Add-Ins can be defined according to filter values. This allows you to control add-in implementation and make it dependent on specific criteria (on a specific Country value, for example).
All ABAP sources, screens, GUIs, and table interfaces created using this enhancement technique are defined in a manner that allows customers to include their own enhancements in the standard. A single Business Add-In contains all of the interfaces necessary to implement a specific task.
The actual program code is enhanced using ABAP Objects. In order to better understand the programming techniques behind the Business Add-In enhancement concept, SAP recommends reading the section on ABAP Objects.
What is difference between badi and user-exists?
What is difference between enhancements and user-exists? and what is the full form of BADI?
I have another doubt in BDC IN BDC WE HAVE MSEGCALL (i did not remember the > correct name) where the error logs are stored, MSEGCALL is a table or structure.
What is the system landscape?
1) Difference between BADI and USER-EXIT.
i) BADI's can be used any number of times, where as USER-EXITS can be used only one time.
Ex:- if your assigning a USER-EXIT to a project in (CMOD), then you can not assign the same to other project.
ii) BADI's are oops based.
2) About 'BDCMSGCOLL' it is a structure. Used for finding error records.
3) Full form of BADI 'Business addins'.
3) System land scape will be depends on your project
Ex:- 'Development server'>'Quality server'-> 'Production server'......
Reward If Helpful.
Regards Madhu. -
What to do if there is no relavent BADI/EXIT for standard transaction
Hi,
Can any one say,What to do if there is no relavent BADI/EXIT for standard transaction.
Helpful Answer will be rewarded.SAP provide some hooks to add our code to the standard program. This is what we called enhancement.
It has following types:
1. Personalization ( here the fields can be hide, display only etc. )
2. Customer Exit ( Function module Exit, Menu Exit and Screen Exit )
3. BTE
4. BADI( Function module Exit, Menu Exit and Screen Exit )
5. User Exit
Suppose all these are not helpful, then you could create the code from scratch. But it is too difficult to develop because of its complexity.
So what you can do is get SAP access key and change the code in the standard program. This is called as modification. Advantage of Enhancement and modification is whenever there is a new version come the changes made by us in standard code will be attached in the newer version also.
The final way is copy the source code into customer namespace and make changes according to your criteria. Eg. in the standard PO creation if you do like this, several disadvantages are the user has to give a new t.code, BASIS guy has to restrict the standard PO create T.code and you can't avail the new features of future versions.
Hope this gives you complete picture and solution. -
Hi,
Is there any provisions or options for adding an additional field by modifying MD06 T-code thro any screen exits.
I searched the system, but could not find any. Pls let me know, if anything is available.
Regards,
JLNHi,
MD04 - Stock requirement list is a dynamic one. Whenever changes will happen related to MRP, it will update immediately.
MD06 - It is a collective MRP list. It is a static one.
It will show result of last MRP run. It will not update the changes the immediately.
That's why system showing different from each other.
Regards,
Dharma
Maybe you are looking for
-
How can I use control break statement in my requirement
Hi ABAPers, In my requirement, I have 4 fields in sorted internal table, (audat, prdha, ipnum, netwr). In that i need to do summation of netwr field falling under same prdha(BU) for the same month internal table fields : audat prdha ipnum netwr 02
-
HOWTO: Resize Bootcamp (NTFS) partition for free using gparted
Hi, Well, if you find your Bootcamp/NTFS/Windows partition running out of space, you may want to increase it or decrease it. The OSX Bootcamp utility doesn't allow resizing the NTFS partitio nor does Disk Utility. Here is a free solution ... NOTE: I'
-
Reinstalling Acrobat 4.0
I unistalled Acrobat 6.0, and I want to reinstall it. To do so, first I have to install 4.0, and then I have to upgrade to 6.0. I have both of my original disks. After I insert the 4.0 CD and click on "Install 4.0", nothing happens. Can anyone su
-
Possible change MPEG4 file extension to Win Movie Maker file type?
After downloading a song from iTunes in .m4p file, Win Movie Maker says it will only accept extensions such as .wav, .wma, .mp2, .mp3, .mpa Is there a way to convert the downloaded file, or a way to get it from iTunes in an acceptable format? Dell Di
-
Why is "New Volume From Layers" Greyed Out? (PS CS5 Extended)
OK here's what I've tried, based on forum research: 1. Make sure two layers are selected. 2. Deleted PS CS5 preferences (using Shift+Ctrl+Alt method) - tried twice. 3. Checked that my video card is supported (it is). Yet this menu item continues to b