User Response Error with BW prompts

Hello Experts,
I have created WebI Report on top of BW query. All the prompts are coming from BW query. I was trying to create user response function but it's not working. Do I need to use special function or I can't use.
Any help would be highly appreciated.
Thanks
Nisniki

Hi,
You can get the values of the prompts that are coming from BW Query using the UserResponse() function. Following is the way to get the value:
1. Say, you have a variable ( from Bex ) with Name as "Customer".
2. Now, in order to get the value of the variable in BO, you need to write the UserResponse() as UserResponse("Customer")
You have to ensure that the name of the variable is mentioned correctly within " ".
Hope it helps.
Regards,
Tej Trivedi

Similar Messages

  • Holding down "shift" during startup causes an "address error" with a prompt

    while booting from a dedicated OS 9.2.2 drive,...
    holding down "shift" during startup causes an "address error" with a prompt to restart holding the shift button,...
    an ideas,....?
    it otherwise starts up fine normally,....
    with spacebar depressed everything good too,.... into extensions manager...
    but booting with extensions off causes that address error crash just before desktop is to appear,...
    hmmm,.... ideas,....?
    thanx

    Well, address error means it's getting an odd addy somehow, and if it's with Extensions off, then maybe a PRAM or NVRAM reset would cure it...
    Have you done a PRAM reset...
    http://docs.info.apple.com/article.html?artnum=2238

  • User response function() for Date Prompt

    Hi Experts,
    I have the requirement to show the date enterted in the prompt in the column of the webi report.
    I used the User response function e.g. =(UserResponse("Report Date").
    Now I am getting the value as 5/14/2014 12:00:00 AM. I dont want to see the time stamp with the date and aslo i want to change the format of the
    date to - yymmdd like 140514.
    Please provide your inputs.
    Thanks,
    Abhimanyu Sharma.

    Hi Arjit,
    I closed the thread.
    Can you please help in the below issue :
    I have two columns in the BEX report:
    1. "Local Count" which is restricted with Multiple Single Value variable "ZIN_CITY" on navigational Attribue 0ROUTE__0ROUTEID.
    2. "Out Count " which is restricted with Multiple Single Value variable "ZOUT_CITY" on navigational Attribue 0ROUTE__0ROUTEID.
    I put value 100 in prompt ZIN_CITY and 200 in ZOUT_CITY when i run this query in BOBJ WEbi.
    But i am getting the error - Not able to retrieve data. i checked in the backend and data is present and also Bex query is working fine.
    IF i change the property of variable to Single value then it is working fine in WEBi.
    Also i tried another method - irresprctive of setting the prompt in BEx on Nav attr 0ROUTE__0ROUTEID, i created the prompt in BOBJ WEBi, but LOVs (list of values)are not coming in the prompt.
    Please suggest on this?

  • Can we set the Option "Show add-in user interface errors" with VBA?

    Does anyone know if the advanced Option "Show add-in user interface errors" can be set with VBA in Project Pro 2013?
    \Spiro Theopoulos, Montreal, QC (Canada)

    Spiro,
    Sorry but as far as I know that option is not available through VBA.
    John

  • Need to automate report having user response in a date prompt variable

    Hi,
    I've a webi 4.0 report which is having date prompt as a input from the user. This report has multiple data providers and is using variable as
    =FormatDate (ToDate(UserResponse("Report Date");"dd Mmm YYYY");"Mmmm YYYY") in the report. Report Date is the user prompt enabling user to input the date and is usually the last day of Month.
    I want to automate the report so that user dont have to input the date in Report Date prompt. How do I implement this?
    If I simply remove Report Date being used as a filter, report will run without asking user but this Report Date is being used as a variable and will #ERROR.
    Please advise.
    Thanks
    Pritesh

    Pritesh,
    Well you can create a Prompt at universe level with if and else as user input or Month end date( eom function ) or you can create variable today at universe level and schedule the every month end.
    Thanks,
    Venkat

  • Bad user experience/errors with Adobe Air widget installation

    I'm having a nervous breakdown at work (it's 10pm and I'm
    still in the office), an Adobe Air widget application I've built is
    somehow causing the client to panic (they can't install or run the
    Adobe Air installation or the widget and now they feel all their
    users are having the same problem). If anyone has a minute to try
    this out and let me know if the widget installs correctly of if you
    have any recommendations on a better user experience I'll greatly
    appreciate it. The client is receiving an error message when
    installing Adobe Air (error 0 or something).
    widget is on the bottom left (installs for PC and Mac). If
    the widget installs without any glitches please let me know. God
    bless.
    http://stayonhermind.com

    The application installed just fine for me. I'm running
    Windows XP SP2 and I already have AIR 1.1 runtime installed.
    I do have a few suggestions for improvement though! Just take
    or leave any or all of these! :)
    In your popup you say,
    "Before installing the 9IX Rules Widget verify that
    you’re running the latest version of Adobe Flash."
    Is this really a necessary requirement? If you are
    downloading the .air I think it would not matter whether or not you
    have Flash installed.
    Then you say,
    "After installing Adobe Air (link below), return to this page
    and re-install the 9IX Rules Widget. Install Adobe Air Now .
    Otherwise click on the button below (the widget install button)."
    I understand you are trying to make this easy for people but
    to me this seems confusing.
    <GENERAL AIR COMMENT>
    If someone does not have AIR runtime already installed I
    thought running a .air would trigger the download and install. If
    not this gets pretty complicated. How do you test if they have AIR
    or not? And since most will not at this early stage how dow we
    educate end-users to even know if they have it or not?
    </GENERAL AIR COMMENT>
    You should digitally sign your AIR app so it does not say
    Publisher: UNKNOWN with the big red "?" icon!
    I would recommend against using all caps in your messages.
    I would recommend choosing a better font (maybe a pixel font)
    since the message text is a bit blurry.

  • Getting an error - with date prompt

    Hi,
    I really need a help to resolve this issue -
    I have created a date prompt As of date with presentation variable name CPG_CASH_DATE.
    I have use this variable in different number columns - Amount Due Original , Amount Applied , Amount Due Remaining.
    Inside the amount due original the function is CASE WHEN "Fact - CPG AR Payment Schedules"."Due Date" <=CAST(CAST(substring(('@{CPG_CASH_DATE}'),1,4)||'/'||substring(('@{CPG_CASH_DATE}'),6,2)||'/'||substring(('@{CPG_CASH_DATE}'),9,2)||' 00:00:00' AS CHAR) AS DATE) THEN ifnull("Fact - CPG AR Payment Schedules"."Amount Due Original",0) ELSE 0 END
    Inside the amount applied the function is CASE WHEN "Fact - CPG AR Payment Schedules"."Due Date" <=CAST(CAST(substring(('@{CPG_CASH_DATE}'),1,4)||'/'||substring(('@{CPG_CASH_DATE}'),6,2)||'/'||substring(('@{CPG_CASH_DATE}'),9,2)||' 00:00:00' AS CHAR) AS DATE) THEN ifnull("Fact - CPG AR Payment Schedules"."Amount Applied",0) ELSE 0 END
    Sometimes it is working -but now I am getting below error.
    Oracle Error code: 1861, message: ORA-01861: message: ORA-01861: literal does not match format string
    at OCI call OCIStmtExecute:
    Please help me to resolve this issue.
    Poojak

    Poojak,
    This is a common error when attempting CAST to dates. I've resolved this in the past using Gerad's post here, http://gerardnico.com/wiki/dat/obiee/cast_as_date
    I'm not sure why you are getting thie inconsistency when you say it was "sometimes" working and now it is not. Perhaps you've been in iterative develpment and changed a few things which broke something here.
    Take a look at Gerad's notes that this will resolve your issue.
    Please awards points if this helps or answers your question.
    Cheers,
    Christian
    http://www.artofbi.com

  • Cannot add/ change user account - error with Microsoft-Windows-User Profiles Service

    Hello
    A few days ago my computer went wierd.
    I cannot update windows because I get no results when I use "Windows Search"
    My metro UI doesnt work properly. I cannot use it. 
    Somebody said that it could be that my User Account could be corrupted.
    I tried to create I new one, but I could do the first steps, because the computer doesnt respond when I click "Change my account" in controlpanel.
    I get errorlogs like this:
    Loggnamn:      Application
    Källa:         Microsoft-Windows-User Profiles Service
    Datum:         2015-04-29 12:03:16
    Händelse-ID:   1542
    Aktivitetskategori:Ingen
    Nivå:          Fel
    Nyckelord:     
    Användare:     SYSTEM
    Dator:         Baddarn
    Beskrivning:
    Det går inte att läsa in registerfilen för klasser.
     INFORMATION - The system cannot find the file specified.
    Händelsens XML-data:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-User Profiles Service" Guid="{89B1E9F0-5AFF-44A6-9B44-0A07A7CE5845}" />
        <EventID>1542</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8000000000000000</Keywords>
        <TimeCreated SystemTime="2015-04-29T10:03:16.571099200Z" />
        <EventRecordID>91382</EventRecordID>
        <Correlation />
        <Execution ProcessID="1128" ThreadID="2524" />
        <Channel>Application</Channel>
        <Computer>Baddarn</Computer>
        <Security UserID="S-1-5-18" />
      </System>
      <EventData>
        <Data Name="Error">The system cannot find the file specified.
    </Data>
      </EventData>
    </Event>
    What can I do?

    Hi Intesabra,
    Have you made any modifications to the machine before the issue?
    First of all ,I would suggest you to update the machine manually.
    Control Panel\All Control Panel Items\Windows Update\Check for updates.
    I also suggest you to perform a full scan with the antivirus software to eliminate the virus issue considering this issue is a little wierd. We can do this in safe mode to improve the scanning quality.
    Run "services.msc" to check the status of "User Profiles Service" and ensure it is running.
    Run "dism /online /cleanup-image /restorehealth" or "sfc /scannow" to check the health of the whole system files.
    Considering this issue occurred recently, we can perform a system restore to recover the machine to a previous point.
    Best regards
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • User authentication error with Proxy Java Calling web Service in XI

    Hello,
    I have deploy a Web Service in SAP XI 3.0. within a SOAP sender adapter.
    I have also created the Proxy Java Class to access the webservice in the Developer Studio and a Plain Java Class (only with a method main) which uses the proxy classes to consume the web service.
    But when I launch the program a get the next error message:
    java.rmi.RemoteException: Service call exception; nested exception is:
         com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized.
         at com.everis.serviciosweb.xi.MI_OUT_STATUSBindingStub.MI_OUT_STATUS(MI_OUT_STATUSBindingStub.java:73)
         at com.everis.llamadas.invocacionWSStatus.main(invocacionWSStatus.java:76)
    Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized.
         at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.handleResponseMessage
    Where MI_OUT_STATUSBindingStub is my Stub Class.
    I have tried to set USERNAME_PROPERTY and PASSWORD_PROPERTY at runtime from my Stub class to the values that I use to access SAP XI (Integration Repository & Integration Directory) but it still doesn't´t work.
    Have anyone a solution?
    Thanks.

    Hi,
        finally I have fixed it.
    The root of the problem was on the way that I proceed with the generation of wsdl in Integration Directory.
    The second step in the wizard for generation of wsdl ask for a url to call the web service and gives you an option to complete the url automatic. I have use this option and it have proposed my an url of type http://<host>:<port>/sap/xi/engine?entry=.......
    But the SOAP adapter call is in the form http://<host>:<port>/XISOAPAdapter/MessageServlet?channel=<party>:<business service>:<channel>
    So using this type of url in the generation of wsld solves all the problems.
    Regards,
    Antonio.

  • LYNC Server 2013 LS User Services error with event ID 32190

    Hi,
       I found below error in my front end server, please help to advise how to solve it. thanks
    Store procedure to replicate data from primary frontend to secondary frontend failed.
    Error Details: [# [Microsoft][SQL Server Native Client 11.0][SQL Server]###52053:ImppImportUserPinAndCerts:Applock request for a publisher was chosen as deadlock victim. #][# [Microsoft][SQL Server Native Client 11.0][SQL Server]###63023:ReppOnDataReceived:Failed
    to import Userpin and certificates for user
    [email protected] #][# [Microsoft][SQL Server Native Client 11.0][SQL Server]###68003:SyncReplicationRepReplicaOnDataReceived:Application failed to process document [urn:upc:[email protected]] #]
    Best regards
    Thomas

    Hi,
    Please make sure the connection between FE Servers and BE Servers is normal.
    Please make sure the CMS replication is update to the latest status.
    You can check the CMS replication by the cmdlet in Lync Server Management Shell:
    Get-CsManagementStoreReplicationStatus
    If the replication is not update to the latest status, you can invoke it by the following cmdlet:
    Invoke-CsManagementStoreReplication
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • User response function

    Hi
    Can any body explain about user response function with simple example.
    Thnaks in advance

    Assuming your universe contains a filter that prompts for user input using the @prompt function and you use the filter in your report OR you add yourself a filter which requires user input in the query panel of your webi report.
    When the report runs it will ask your user to provide a value by displaying a text that you provided:
    eg. Enter year:
    The function UserResponse('Enter year:') will return the value the user provided and you can use it in a WebI variable for further calculations
    eg. the following code in WebI
    ="User entered year " + UserResponse('Enter year:')
    will display
    User entered year 2010
    assuming your user typed in the value 2010 when prompted.
    Hope this helps.
    Regards,
    STratos

  • SAP PI Sender Mail Adapter error : Unexpected User response

    Hello ,
              I developed a scenario which requires Sender mail Adapter to connect a Third party system to PI, by going thro the links .
    /people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step
    and PDFs in SDN.
    When configured the sender mail adapter using POP Mail Server,faced the following error:gave the correct URL and Login credentials.
    +" exception caught during processing mail message; java.io.IOException: unexpected user response; read -ERR Command is not valid in this state."+
    Then used IMAP for the same mail server : error:
    "exception caught during processing mail message; java.io.IOException: unexpected login response; read 001F BAD Command received in Invalid state."
    Tried with another Mail server :
    "exception caught during processing mail message; java.net.ConnectException: Connection timed out".
    Can you please help, what be the cause? how to rectify it?

    Hi
    There might be an connectivity issue from PI server to mail server. Please check with your BASIS to resolve the issue.,
    Regards
    Ramg

  • Need help with User Response function

    I have the following formula:
    =UserResponse(DataProvider([Segment Name]);"Effective Date")
    The user response is a date which is displayed like this:
    M/dd/yyyy h:mm:ss a
    I would like to display the date as Mmm-dd-yyyy with no time at the end. 
    When I tried this formula:
    =FormatDate(UserResponse(DataProvider([Segment Name]);"Effective Date");"Mmm-dd-yyyy")
    I get the "invalid data type" message.  I think I understand why (UserResponse isn't a date function), but I'm unable to come up with another formula that will do what I require.
    When I tried this formula:
    =ToDate((UserResponse(DataProvider([Segment Name]);"Effective Date"));"Mmm-dd-yyyy")
    I get #ERROR in the cell. 
    I also tried formatting the cell to no effect.

    Hi Ellen,
    You have to use the format that the user is inputing in, and then format it as you would like it
    so this should work.
    FormatDate(ToDate((UserResponse(DataProvider(Segment Name);"Effective Date"));"M/dd/yyyy h:mm:ss a");"Mmm-dd-yyyy")
    Regards
    Alan

  • Sync with user provisioning error

    Hi,
    I am working on planning 9.3. I am facing following problems :
    1)I have created a form and when I use "Assign access" option I don't see any user in the list. When I click on add access option, I am getting following error
    " Sync with user provisioning succedded with Errors. See Planning log for details"
    2)When I add an user in user console management and give provisioning(Application provisioning) to it , it is not giving me any error. But I am not able to sign in with the new username to the application
    Please suggest solution.
    Thanks

    Hi,
    This is in response to post by tclauer..
    Is this happening on all planning apps or is the problem specific to one app ?
    Can you log in with the admin account ?
    Can you access the following URL from the planning server :-
    http://<HSS servername>:58080/interop/framework/getCSSConfigFile
    Does a file exist in (I am assuming you are on Tomcat)
    Hyperion\deployments\Tomcat5\HyperionPlanning\temp
    like :- <HSS servernamer>-getCSSConfigFile-<generatednumber>-CSS.xml
    There should also be a file in the same directory called :-
    SharedServices_Security_Client.log
    This log might give further details to the errror
    Cheers
    John

  • Error occurred while finding users using API with custom field

    Hi All,
    I am getting the following error while searching user using API with custom attribute. Did anybody faced the same problem before ?
    Hashtable<Object,Object> env = new Hashtable<Object,Object>();
    env.put("java.naming.factory.initial", "weblogic.jndi.WLInitialContextFactory");
    env.put(OIMClient.JAVA_NAMING_PROVIDER_URL, "t3://localhost:14000");
    System.setProperty("java.security.auth.login.config","C:\\Oracle\\Middleware\\Oracle_IDM1\\designconsole\\config\\authwl.conf");
    System.setProperty("OIM.AppServerType", "wls");
    System.setProperty("APPSERVER_TYPE", "wls");
    tcUtilityFactory ioUtilityFactory = new tcUtilityFactory(env, "xelsysadm", "Weblogic123$");
    OIMClient client = new OIMClient(env);
    client.login("xelsysadm", "Weblogic123$".toCharArray());
    SimpleDateFormat formatter = new SimpleDateFormat("yyyy-MM-dd");
    tcUserOperationsIntf moUserUtility = (tcUserOperationsIntf)ioUtilityFactory.getUtility("Thor.API.Operations.tcUserOperationsIntf");
    Hashtable mhSearchCriteria = new Hashtable();
    mhSearchCriteria.put("USR_UDF_ACTUALSTARTDATE",formatter.format(date));
    tcResultSet moResultSet = moUserUtility.findAllUsers(mhSearchCriteria);
    printTcResultSet(moResultSet,"abcd");
    log4j:WARN No appenders could be found for logger (org.springframework.jndi.JndiTemplate).
    log4j:WARN Please initialize the log4j system properly.
    Exception in thread "main" Thor.API.Exceptions.tcAPIException: Error occurred while finding users.
    at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:237)
    at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
    at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
    at Thor.API.Operations.tcUserOperationsIntf_e9jcxp_tcUserOperationsIntfRemoteImpl_1036_WLStub.findAllUsersx(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
    at java.lang.reflect.Method.invoke(Unknown Source)
    at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
    at com.sun.proxy.$Proxy2.findAllUsersx(Unknown Source)
    at Thor.API.Operations.tcUserOperationsIntfDelegate.findAllUsers(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
    at java.lang.reflect.Method.invoke(Unknown Source)
    at Thor.API.Base.SecurityInvocationHandler$1.run(SecurityInvocationHandler.java:68)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.security.Security.runAs(Security.java:41)
    at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(weblogicLoginSession.java:52)
    at Thor.API.Base.SecurityInvocationHandler.invoke(SecurityInvocationHandler.java:79)
    at com.sun.proxy.$Proxy3.findAllUsers(Unknown Source)
    at oim.standalone.code.OIMAPIConnection.usersearch(OIMAPIConnection.java:209)
    at oim.standalone.code.OIMAPIConnection.main(OIMAPIConnection.java:342)
    Caused by: Thor.API.Exceptions.tcAPIException: Error occurred while finding users.
    at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.findAllUsers(tcUserOperationsBean.java:4604)
    at Thor.API.Operations.tcUserOperationsIntfEJB.findAllUsersx(Unknown Source)
    at sun.reflect.GeneratedMethodAccessor1614.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.oracle.pitchfork.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:34)
    at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
    at com.oracle.pitchfork.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:42)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
    at com.sun.proxy.$Proxy347.findAllUsersx(Unknown Source)
    at Thor.API.Operations.tcUserOperationsIntf_e9jcxp_tcUserOperationsIntfRemoteImpl.__WL_invoke(Unknown Source)
    at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
    at Thor.API.Operations.tcUserOperationsIntf_e9jcxp_tcUserOperationsIntfRemoteImpl.findAllUsersx(Unknown Source)
    at Thor.API.Operations.tcUserOperationsIntf_e9jcxp_tcUserOperationsIntfRemoteImpl_WLSkel.invoke(Unknown Source)
    at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:667)
    at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
    at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:522)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
    at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
    at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    Thank you

    Hi J,
    Thanks for the reply. But the code is working fine for OOTB attributes and  for 11g API i am getting permission exception
    Exception in thread "main" oracle.iam.platform.authz.exception.AccessDeniedException: You do not have permission to search the following user attributes: USR_UDF_ACTUALSTARTDATE.
    at oracle.iam.identity.usermgmt.impl.UserManagerImpl.search(UserManagerImpl.java:1465)
    at sun.reflect.GeneratedMethodAccessor1034.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
    at oracle.iam.platform.utils.DMSMethodInterceptor.invoke(DMSMethodInterceptor.java:25)
    at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
    at com.sun.proxy.$Proxy366.search(Unknown Source)
    at oracle.iam.identity.usermgmt.api.UserManagerEJB.searchx(Unknown Source)
    at sun.reflect.GeneratedMethodAccessor1449.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.oracle.pitchfork.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:34)
    at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
    at com.oracle.pitchfork.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:42)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
    at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
    at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
    at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
    at com.sun.proxy.$Proxy365.searchx(Unknown Source)
    at oracle.iam.identity.usermgmt.api.UserManager_nimav7_UserManagerRemoteImpl.__WL_invoke(Unknown Source)
    at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
    at oracle.iam.identity.usermgmt.api.UserManager_nimav7_UserManagerRemoteImpl.searchx(Unknown Source)
    at oracle.iam.identity.usermgmt.api.UserManager_nimav7_UserManagerRemoteImpl_WLSkel.invoke(Unknown Source)
    at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:667)
    at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
    at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:522)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
    at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
    at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    Caused by: oracle.iam.identity.exception.SearchAttributeAccessDeniedException: You do not have permission to search the following user attributes: USR_UDF_ACTUALSTARTDATE.
    at oracle.iam.identity.usermgmt.impl.UserManagerImpl.search(UserManagerImpl.java:1462)
    ... 44 more

Maybe you are looking for