User type in SUIM report

Hi,
I am working on a custom user management tool . I had deployed the tool in two different system. Strangely the SUIM report of the two systems are different. The user Type value is different in both the system. Can you please help me out from where usertype is retrieved in the SUIM report. i checked usr02 table in both the system and found out its exactly the same.
Thanks in advance
Tashi

Hello Ralf,
It is obviously Service User used in MSS.
Regards
Rafi

Similar Messages

Report to see user type and roles assigned to users in EP?

Hi,
a) Is there any reporting mechanism in EP? Any specific report which throws up user types and roles assigned to the users? There is an option of 'Export' in the user management role but unfortunately it does not give information on User Type.
b) If the group is assigned a role, How can we see ( in any report) the roles assigned to a group? In the 'export' option of the 'User Management' this information does not come.

By default Portal UME comes along with the installation of portal.
Sometimes we may integrate external users using LDAP. At that time users come from ABAP stack or some active directories. But you can also create users in the portal UME. The purpose of using LDAP is to maintain the users centrally rather than creating again in portal.
You can check them in user administration->identity management and search for the users.
THere you can see some users will be from UME and some from LDAP.
User Admin tool is nothing but User Administration only.
Raghu

"Manage Users" IR report displaying incorrect user types

Home>Administration>Users
APEX 4.0.2.00.07
DB 11.2.0.2
Found a couple of question-raising things:
1) User type is showing "Workspace Administrator" for almost all users (many are only users) with a couple identified as "Developer" (who really do only have developer privs turned on). If I knew the sql for the IR report I might find the problem - checked wwv_flow_fnd_user and wwv_flow_developers and they both look OK (no recs in wwv_flow_developers for the end users and those with given admin privs are marked as admin, etc.). Did find one dup group name but removing it didn't seem to have an effect.
2) Trying to find out what is going on I found the second: It appears that if you have assigned more than one group to a user (apex group to apex user), then add the group_name column to the Manage Users IR, you get the "single row subquery returns more than one row".
Haven't found any other posts here on this. Any ideas?
Thanks,
Steve

Thanks Richard - forgot about the builder import.
After taking the IR sql and working it I found the following:
In this apex installation...
There seems to be a problem with the outer join between wwv_flow_developers and wwv_flow_fnd_user which brings non-null values for d.is_admin and d.is_developer (and for us these are 'Y' if there are no matching records in wwv_flow_developers.
Changing the decode for DEV_TYPE to use a nvl for d.userid to set all users to end user if they are not in the wwv_flow_developers table fixes the display of user type.
Now I am guessing this is a data anomaly rather than a bug. Anyone have any ideas on why the outer join to wwv_flow_developers shows a not-null value for is_admin and is_developer?
Steve
Here is a mostly-intact version of the region source (I shortened it considerably from the code below to focus on the incorrect USER TYPE display issue):
select /* APEX4350P55a */
USER_ID,
u.user_name "USER",
u.email_address "eMail",
u.first_name,
u.last_name,
replace(u.default_schema,'%'||'null%',null) df,
decode(nvl(d.is_developer,'N'),'Y', (select case
when (wwv_flow_fnd_user_api.workspace_account_days_left(
wwv_flow_user_api.get_username(user_id)) > 0)
then m.password_valid
else m.password_expired
end expiration from dual),
m.no_developer_priv) developer,
decode (nvl(d.is_developer,'N'),'Y',last_login,null) last_login,
decode (nvl(d.is_developer,'N'),'Y',last_login,null) last_login2,
decode (nvl(d.is_developer,'N'),'Y',
nvl(builder_login_count,0),null) builder_login_count,
decode(nvl(u.account_locked,'N'),'Y',m.yes,m.n)ul,
case
when (wwv_flow_fnd_user_api.end_user_account_days_left(
wwv_flow_user_api.get_username(user_id)) > 0)
then m.password_valid
else m.password_expired
end expiration,
u.DESCRIPTION,
u.PASSWORD_LIFESPAN_DAYS,
u.PASSWORD_LIFESPAN_ACCESSES,
u.PASSWORD_ACCESSES_LEFT,
u.LAST_AGENT,
u.LAST_IP,
u.ACCOUNT_EXPIRY,
u.FAILED_ACCESS_ATTEMPTS,
u.CHANGE_PASSWORD_ON_FIRST_USE,
u.FIRST_PASSWORD_USE_OCCURRED,
decode(nvl(d.is_admin,'N'),'Y',
m.admin,decode(nvl(d.is_developer,'N'),
'Y',m.dev,m.end_user)) dev_type,
(select group_id from WWV_FLOW_FND_GROUP_USERS where user_id = u.user_id) group_id,
(select GROUP_NAME from WWV_FLOW_FND_USER_GROUPS where id = (select group_id from WWV_FLOW_FND_GROUP_USERS where user_id = u.user_id)) group_name,
LAST_UPDATE_DATE,
LAST_UPDATED_BY,
CREATION_DATE,
CREATED_BY,
nvl(d.developer_type,'END_USER') developer_type,
decode(nvl(ALLOW_APP_BUILDING_YN,'Y'),'Y',m.yes,m.n) ALLOW_APP_BUILDING,
decode(nvl(ALLOW_SQL_WORKSHOP_YN,'Y'),'Y',m.yes,m.n) ALLOW_SQL_WORKSHOP,
decode(nvl(ALLOW_WEBSHEET_DEV_YN,'Y'),'Y',m.yes,m.n) ALLOW_WEBSHEET_DEV,
decode(nvl(ALLOW_TEAM_DEVELOPMENT_YN,'Y'),'Y',m.yes,m.n) ALLOW_TEAM_DEVOPMENT
from WWV_FLOW_FND_USER u,
(select USERID,
decode(instr(DEVELOPER_ROLE,'ADMIN'),0,'N','Y') is_admin,
'Y' is_developer,
case
when instr(DEVELOPER_ROLE,'BASIC_DEV') > 0 then
'BASIC_DEV'
when instr(DEVELOPER_ROLE,'ADMIN') > 0 then
'ADMIN'
when instr(DEVELOPER_ROLE,'CREATE') > 0 then
'DEVELOPER'
else
'UNKNOWN'
end developer_type
from WWV_FLOW_DEVELOPERS
where security_group_id = :flow_security_group_id) d,
(select wwv_flow_lang.system_message('F4000.NO') n,
wwv_flow_lang.system_message('F4000.YES') yes,
wwv_flow_lang.system_message('PASSWORD_VALID') password_valid,
wwv_flow_lang.system_message('PASSWORD_EXPIRED') password_expired,
wwv_flow_lang.system_message('NO_DEVELOPER_PRIV') no_developer_priv,
wwv_flow_lang.system_message('DEVELOPER') dev,
wwv_flow_lang.system_message('ADMINISTATOR') admin,
wwv_flow_lang.system_message('END_USER') end_user,
wwv_flow_lang.system_message('BASIC_DEVELOPER') basic_developer
from dual) m
where
u.user_name = d.userid(+) and
u.security_group_id = :flow_security_group_id
Edited by: stevehoward on Jul 6, 2011 11:37 AM
Edited by: stevehoward on Jul 6, 2011 11:40 AM

Currency type in COPA report

I created a form to generate a COPA report. I selected "both company code and operating concern currency types while creating the form. Now, I need to be able to give the currency type as variable to have the user print the copa report whatever currency they want to print. It's cost based COPA /
How can I get the currency type as selection option? please advise.
Thanks,
Sri

From the form's general selection, select the currency type and define as local variable.

Issue with "unknown user type 6" on Coherence 3.5.2

Having an issue with a cluster which is running using an internally developed cluster starter tool. This tool, and the associated cluster, all use POF, and upon attempting to connect a non-storing member to the cluster from java, the following exception is raised...
2011-07-11 15:54:58.338/2.469 Oracle Coherence GE 3.5.2/463p2 <Error> (thread=Cluster, member=n/a): This cluster node is
configured to use serializer com.tangosol.io.pof.ConfigurablePofContext {location=application-pof-config.xml}, which ap
pears to be different from the serializer used by Member(Id=1, Timestamp=2011-07-11 15:34:30.779, Address=10.74.82.193:8
088, MachineId=11188, Location=site:INTRANET.BARCAPINT.COM,machine:ldnpsm020006423,process:80976,member:ldnpsm020006423:
cacheserver:1).
java.io.StreamCorruptedException: unknown user type: 6
at com.tangosol.io.pof.PofBufferReader.readAsObject(PofBufferReader.java:3289)
at com.tangosol.io.pof.PofBufferReader.readObject(PofBufferReader.java:2600)
at com.tangosol.io.pof.ConfigurablePofContext.deserialize(ConfigurablePofContext.java:348)
at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.readObject(Service.CDB:4)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid$ServiceConfigMap.readObject(Grid.CDB
:1)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid$MemberConfigResponse.read(Grid.CDB:1
3)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onNotify(Grid.CDB:123)
at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.ClusterService.onNotify(ClusterServi
ce.CDB:3)
at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
at java.lang.Thread.run(Thread.java:619)
There is no serialiser configured in the cache config, instead we just set tangosol.pof.enabled=true, and set the pof config file to what is seen above. The thing which is very confusing about this error is that unlike other clients which we connect, and in fact the servers they connect to, this client never attempts to load the cache configuration file. The point at which this should happen, prior to pof loading, shows:
2011-07-11 15:54:57.260/1.391 Oracle Coherence GE 3.5.2/463p2 <Info> (thread=Main Thread, member=n/a): Loaded cache conf
iguration from "jar:file:/C:/Program%20Files/Oracle/coherence/3.5.2b463P2/lib/coherence.jar!/reports/report-group.xml"
I have tried every combination of classpath entries I can think of, and no matter what, it never shows an attempt to load the application-cache-config.xml supplied in the startup. Does anyone have any experience with something like this?

I guess your non-storing JAVA code does not specify -Dtangosol.pof.enabled=true and the -Dtangosol.pof.config =<POF file location> on joining the cluster. Post the startup java command and the complete logs.
If application-cache-config is not loaded then coherence-cache-config.xml should be loaded by default and set -Dtangosol.coherence.cacheconfig=<application-cache-config>
Cheers,
NJ

Issue with users trying to save reports to thier Documents on one drive.

I am working
on a 2013 SharePoint environment and users who use Power View reports. I
have a user who can create reports on a site I have set up (no problems
there). They can also save reports to PowerPivot Gallery they have added
in their Newsfeed for their personal site (no problems here). The problem
is when they try to save the report and go to Documents on one Drive it fails
with below error message. I am an admin but can save just fine to my
documents. I know the error shows an access issue but not sure where or
how to resolve this issue for users. <o:p></o:p>
P.S. the
issue happens before they even save button it happens when they see the My
Documents and try to open it. Again it is there personal SharePoint site
so not sure why they would not have access.<o:p></o:p>
SoapAction: ListChildren
HttpStatus: 500
ServerErrorCode: rsAccessDenied
ServerError: <detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsAccessDenied</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message
xmlns="http://www.microsoft.com/sql/reportingservices">The permissions granted to user 'HQEAGLEVIEW\levi.bond' are insufficient for performing this operation. ---> Microsoft.ReportingServices.Diagnostics.Utilities.AccessDeniedException:
The permissions granted to user 'HQEAGLEVIEW\levi.bond' are insufficient for performing this operation.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsAccessDenied&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3412.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3412.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message
msrs:ErrorCode="rsAccessDenied" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsAccessDenied&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3412.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">The permissions granted to user 'HQEAGLEVIEW\levi.bond' are insufficient for performing this operation.</Message></MoreInformation><Warnings
xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
here is actual screen shot
<v:shapetype coordsize="21600,21600" filled="f" id="_x0000_t75" o:preferrelative="t" o:spt="75" path="m@4@5l@4@11@9@11@9@5xe" stroked="f">
<v:stroke joinstyle="miter">
<v:formulas>  <v:f eqn="if lineDrawn pixelLineWidth 0">
  <v:f eqn="sum @0 1 0">
  <v:f eqn="sum 0 0 @1">
  <v:f eqn="prod @2 1 2">
  <v:f eqn="prod @3 21600 pixelWidth">
  <v:f eqn="prod @3 21600 pixelHeight">
  <v:f eqn="sum @0 0 1">
  <v:f eqn="prod @6 1 2">
  <v:f eqn="prod @7 21600 pixelWidth">
  <v:f eqn="sum @8 21600 0">
  <v:f eqn="prod @7 21600 pixelHeight">
  <v:f eqn="sum @10 21600 0">
</v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:f></v:formulas>
<v:path gradientshapeok="t" o:connecttype="rect" o:extrusionok="f">
<o:lock aspectratio="t" v:ext="edit">
</o:lock></v:path></v:stroke></v:shapetype><v:shape alt="" id="Picture_x0020_1" o:spid="_x0000_i1025" style="width:7in;height:426.75pt;" type="#_x0000_t75">
<v:imagedata o:href="cid:[email protected]" src="file:///C:\Users\KEN~1.CRA\AppData\Local\Temp\msohtmlclip1\01\clip_image001.png">
</v:imagedata></v:shape>
Ken Craig

Hi Ken,
It's strange that the User Profile Service Application is not available there. Please use PowerShell to check it, and you can run the command below:
Get-SPServiceApplication | where-object{$_.DisplayName -like 'User Profile*'}
Please ensure you are connecting to the correct farm, and open PowerShell with administrator permission. Meanwhile, add a test user in your Active Directory, and test to see whether the user's My Site can be created.
If the User Profile Service Application can be listed by PowerShell, and the new user's My Site can be created, there might be an UI issue in your Central Administration. Otherwise, you may consider to recreate or restore your User Profile Service Application.
Here are references:
https://technet.microsoft.com/en-us/library/gg985419.aspx
http://sharepoint.stackexchange.com/questions/55087/user-profile-service-application-unable-to-create-a-new-user-profile-service-ap
https://joanneklein.wordpress.com/2011/11/08/recreated-user-profile-service-application-deletes-user-profiles/
Thanks,
Reken Liu

"unknown user type" exception when the object don't exist for i/p key.

Hi
I'm using Coherence REST service(comes with the Coherence bundle) to validate my cache data.
When I hit the cache for a valid key, I get data returned back. But for the object that don't exist in the cache I get "Internal Server" error.
I'm fine with "Internal Server" response show in the browser, but I don't want it to be printed as part of my coherence logs.
For example, when I hit the REST url for key that don't exist in the cache, I get below exception in coherence logs.
How can I get rid off it (or) suppress the exception logs.
Thanks for your time.
(Wrapped) java.io.IOException: unknown user type: com.tangosol.coherence.rest.internal.Get
     at com.tangosol.util.Base.ensureRuntimeException(Base.java:288)
     at com.tangosol.util.Base.ensureRuntimeException(Base.java:269)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketPublisher.packetizeMessage(PacketPublisher.CDB:23)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketPublisher$InQueue.add(PacketPublisher.CDB:11)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.dispatchMessage(Grid.CDB:62)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.post(Grid.CDB:31)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.send(Grid.CDB:1)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.poll(Grid.CDB:13)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.poll(Grid.CDB:11)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$BinaryMap.invoke(PartitionedCache.CDB:30)
     at com.tangosol.util.ConverterCollections$ConverterInvocableMap.invoke(ConverterCollections.java:2282)
     at com.tangosol.util.ConverterCollections$ConverterNamedCache.invoke(ConverterCollections.java:2748)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$ViewMap.invoke(PartitionedCache.CDB:11)
     at com.tangosol.coherence.component.util.SafeNamedCache.invoke(SafeNamedCache.CDB:1)
     at com.tangosol.coherence.rest.EntryResource.getValue(EntryResource.java:241)
     at com.tangosol.coherence.rest.EntryResource.get(EntryResource.java:85)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
     at java.lang.reflect.Method.invoke(Method.java:616)
     at com.sun.jersey.spi.container.JavaMethodInvokerFactory$1.invoke(JavaMethodInvokerFactory.java:60)
     at com.sun.jersey.server.impl.model.method.dispatch.AbstractResourceMethodDispatchProvider$ResponseOutInvoker._dispatch(AbstractResourceMethodDispatchProvider.java:205)
     at com.sun.jersey.server.impl.model.method.dispatch.ResourceJavaMethodDispatcher.dispatch(ResourceJavaMethodDispatcher.java:75)
     at com.sun.jersey.server.impl.uri.rules.HttpMethodRule.accept(HttpMethodRule.java:288)
     at com.sun.jersey.server.impl.uri.rules.SubLocatorRule.accept(SubLocatorRule.java:134)
     at com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:147)
     at com.sun.jersey.server.impl.uri.rules.SubLocatorRule.accept(SubLocatorRule.java:134)
     at com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:147)
     at com.sun.jersey.server.impl.uri.rules.ResourceClassRule.accept(ResourceClassRule.java:108)
     at com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:147)
     at com.sun.jersey.server.impl.uri.rules.RootResourceClassesRule.accept(RootResourceClassesRule.java:84)
     at com.sun.jersey.server.impl.application.WebApplicationImpl._handleRequest(WebApplicationImpl.java:1469)
     at com.sun.jersey.server.impl.application.WebApplicationImpl._handleRequest(WebApplicationImpl.java:1400)
     at com.sun.jersey.server.impl.application.WebApplicationImpl.handleRequest(WebApplicationImpl.java:1349)
     at com.sun.jersey.server.impl.application.WebApplicationImpl.handleRequest(WebApplicationImpl.java:1339)
     at com.sun.jersey.server.impl.container.httpserver.HttpHandlerContainer.handle(HttpHandlerContainer.java:191)
     at com.sun.net.httpserver.Filter$Chain.doFilter(Filter.java:83)
     at sun.net.httpserver.AuthFilter.doFilter(AuthFilter.java:83)
     at com.sun.net.httpserver.Filter$Chain.doFilter(Filter.java:86)
     at sun.net.httpserver.ServerImpl$Exchange$LinkHandler.handle(ServerImpl.java:589)
     at com.sun.net.httpserver.Filter$Chain.doFilter(Filter.java:83)
     at sun.net.httpserver.ServerImpl$Exchange.run(ServerImpl.java:561)
     at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:603)
     at java.lang.Thread.run(Thread.java:679)
Caused by: java.io.IOException: unknown user type: com.tangosol.coherence.rest.internal.Get
     at com.tangosol.io.pof.ConfigurablePofContext.serialize(ConfigurablePofContext.java:351)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.writeObject(Service.CDB:1)
     at com.tangosol.coherence.component.net.Message.writeObject(Message.CDB:1)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$InvokeRequest.write(PartitionedCache.CDB:7)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.serializeMessage(Grid.CDB:14)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.packetProcessor.PacketPublisher.packetizeMessage(PacketPublisher.CDB:17)
     ... 42 more
Caused by: java.lang.IllegalArgumentException: unknown user type: com.tangosol.coherence.rest.internal.Get
     at com.tangosol.io.pof.ConfigurablePofContext.getUserTypeIdentifier(ConfigurablePofContext.java:430)
     at com.tangosol.io.pof.ConfigurablePofContext.getUserTypeIdentifier(ConfigurablePofContext.java:419)
     at com.tangosol.io.pof.PofBufferWriter.writeUserType(PofBufferWriter.java:1671)
     at com.tangosol.io.pof.PofBufferWriter.writeObject(PofBufferWriter.java:1623)
     at com.tangosol.io.pof.ConfigurablePofContext.serialize(ConfigurablePofContext.java:345)
     ... 47 more

Hi,
I included coherence-rest-pof-config.xml as part of my pof-config as shown below.
<pof-config xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns="http://xmlns.oracle.com/coherence/coherence-pof-config"
xsi:schemaLocation="http://xmlns.oracle.com/coherence/coherence-pof-config coherence-pof-config.xsd">
<user-type-list>
<include>coherence-pof-config.xml</include>
<include>coherence-rest-pof-config.xml</include>
<user-type>
<type-id>1001</type-id>
I also checked my coherence-rest.jar files for the configuration and the clasess, and all of them exist.
I started my coherence by passing the classpath as below:
$JAVAEXEC -server -Xms6g -Xmx6g -XX:+UseParNewGC -XX:MaxGCPauseMillis=50 -XX:+UseConcMarkSweepGC -XX:+CMSIncrementalMode -XX:CMSInitiatingOccupancyFraction=25 -XX:MinHeapFreeRatio=40 -XX:MaxHeapFreeRatio=70 -Duser.timezone=GMT -Djava.rmi.server.hostname=xx.xx.xx.xx -Dcom.sun.management.jmxremote -Dcom.sun.management.jmxremote.port=13366 -Dcom.sun.management.jmxremote.authenticate=false -Dcom.sun.management.jmxremote.ssl=false -Dtangosol.coherence.log.level=3 -Dtangosol.coherence.log=log4j -showversion $JAVA_OPTS -cp $COHERENCE_HOME/config/:$COHERENCE_HOME/lib/coherence.jar:$COHERENCE_HOME/lib/guidecacheclient.jar:$COHERENCE_HOME/lib/jersey-server-1.8.jar:$COHERENCE_HOME/lib/jersey-core-1.8.jar:$COHERENCE_HOME/lib/jersey-json-1.8.jar:$COHERENCE_HOME/lib/jackson-all-1.8.1.jar:$COHERENCE_HOME/lib/coherence-rest.jar:$COHERENCE_HOME/lib/log4j-1.2.16.jar -Dtangosol.coherence.management=all -Dtangosol.coherence.management.remote=true -Dtangosol.coherence.localhost=xx.xx.xx.xx -Dtangosol.coherence.mode=eval com.tangosol.net.DefaultCacheServer $1
While starting, I'm getting configuration missing exception as shown below. What am I still missing.
Exception in thread "main" (Wrapped) (Wrapped: error creating class "com.tangosol.io.pof.ConfigurablePofContext") java.lang.IllegalStateException: Missing PofSerializer configuration (Config=pgs-pof-config.xml, Type-Id=801, Class-Name=com.tangosol.coherence.rest.internal.Get)
     at com.tangosol.coherence.component.util.Daemon.start(Daemon.CDB:52)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.start(Service.CDB:7)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.start(Grid.CDB:6)
     at com.tangosol.coherence.component.util.SafeService.startService(SafeService.CDB:39)
     at com.tangosol.coherence.component.util.safeService.SafeCacheService.startService(SafeCacheService.CDB:5)
     at com.tangosol.coherence.component.util.SafeService.ensureRunningService(SafeService.CDB:27)
     at com.tangosol.coherence.component.util.SafeService.start(SafeService.CDB:14)
     at com.tangosol.net.DefaultConfigurableCacheFactory.ensureServiceInternal(DefaultConfigurableCacheFactory.java:1105)
     at com.tangosol.net.DefaultConfigurableCacheFactory.ensureService(DefaultConfigurableCacheFactory.java:937)
     at com.tangosol.net.DefaultCacheServer.startServices(DefaultCacheServer.java:81)
     at com.tangosol.net.DefaultCacheServer.intialStartServices(DefaultCacheServer.java:250)
     at com.tangosol.net.DefaultCacheServer.startAndMonitor(DefaultCacheServer.java:55)
     at com.tangosol.net.DefaultCacheServer.main(DefaultCacheServer.java:197)
Caused by: (Wrapped: error creating class "com.tangosol.io.pof.ConfigurablePofContext") java.lang.IllegalStateException: Missing PofSerializer configuration (Config=pgs-pof-config.xml, Type-Id=801, Class-Name=com.tangosol.coherence.rest.internal.Get)
     at com.tangosol.io.ConfigurableSerializerFactory.createSerializer(ConfigurableSerializerFactory.java:46)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.instantiateSerializer(Service.CDB:1)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.ensureSerializer(Service.CDB:32)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.ensureSerializer(Service.CDB:4)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onEnter(Grid.CDB:25)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.PartitionedService.onEnter(PartitionedService.CDB:19)
     at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:14)
     at java.lang.Thread.run(Thread.java:679)
Caused by: java.lang.IllegalStateException: Missing PofSerializer configuration (Config=pgs-pof-config.xml, Type-Id=801, Class-Name=com.tangosol.coherence.rest.internal.Get)
     at com.tangosol.io.pof.ConfigurablePofContext.report(ConfigurablePofContext.java:1283)
     at com.tangosol.io.pof.ConfigurablePofContext.createPofConfig(ConfigurablePofContext.java:1013)
     at com.tangosol.io.pof.ConfigurablePofContext.initialize(ConfigurablePofContext.java:797)
     at com.tangosol.io.pof.ConfigurablePofContext.setContextClassLoader(ConfigurablePofContext.java:322)
     at com.tangosol.io.ConfigurableSerializerFactory.createSerializer(ConfigurableSerializerFactory.java:42)
     ... 7 more
Thanks for your help.

To add "Transaction type" in depreciation report (S_ALR_87012026)

Hi SAP Experts,
I have a request from a user to add selection option of "Transaction Type" in the Depreciation Report.Is this possible to be done by adding in Dynamic Selection?If yes, how?
Refer to SAP Note 439407,it seem like it only cater for structure ANLAV only but not for for ANEPV - BWASL.
Please advise since im trying to avoid copying the standard program.
Regards,

Hi,
Yes, user-defined fields added as per SAP note 335065 are shown in the report output.
Alternatively, you can also create a sort version. However, check the restrictions for both options as outlined in this note.
Though still, you cannot add the transaction type as a field as the note is pointing out the tables from which fields can be extracted from: ANLAV/ANLB/ANLV only.
CI_ANLU is about user defiened fields in master data and so you cannot add BWASL in this table as this field has nothing to do with master data.
Just on the side a small comment: not sure of what benefit it would be to see the transaction type in a report such as RAHAFA_ALV01 as this report is mainly about all sort of information regarding all types of depreciation values.
I hope this helps further.
Kind regards,
Brigitte

Types of web reports

Hi gurus,
What are the types of web reports we have? Where do you specify them, Is it some sort of property setting?
i'll asign points.
regards
priya

Hi,
   Web application design, with the BEx Web Application Designer as its main tool, allows you to use generic OLAP navigation for your BI data in Web applications as well as in business intelligence cockpits for simple or highly individual scenarios. Web application design comprises a broad spectrum of Web-based business intelligence scenarios, which you can adjust to meet your individual needs using standard Web technologies.
Features
The following figure shows how the Web Application Designer is integrated into the function landscape and tool landscape of the Business Explorer:
You can use this BEx Web Application Designer, the desktop application used to create Web applications, to generate HTML pages that contain BI-specific contents such as tables, charts or maps. These objects, which retrieve BI data from a data provider and place it in a Web application as HTML, are known as Web items. For more information about the Web items available, see Web Items. Web Applications are based on Web Templates that you create and edit in the Web Application Designer. You can save the Web templates and access them from the Web Browser or the portal. Once they have been executed in the Web, Web templates are known as Web Applications.
Business Explorer Web application design allows you to create highly individual scenarios with user-defined interface elements by using standard markup languages and the Web design API. You can adjust and enhance the Web templates (the HTML pages that determine the structure of Web applications) on an individual basis. For more information on this, see Web Design API.
The BEx Web Application Designer is a desktop application for creating Web applications with BI-specific content. Using the BEx Web Application Designer, you can create an HTML page containing BI-specific content such as various tables, charts, or maps. This HTML page (Web application) is the basis not only for Web applications with complex interaction, but also for Web cockpits and iViews.
The command wizard and pattern wizard are integral parts of the Web Application Designer. Using the command wizard, you can easily generate commands from the Web Design API and include them in your Web template. Using the pattern wizard, you can configure BI patterns to a certain extent and tailor them to meet your needs.
The initial view of the BEx Web Application Designer has four different screen areas in addition to the menu and toolbars.
      Web Items Screen Area
      Web Template Screen Area
      Properties Screen Area
      Error and Warnings Screen Area
Applications with the BEx Web Application Designer. For more information about creating Web applications, see Creating Web Applications.
You can adjust the appearance of the Web Application Designer to meet your requirements. The object on which you are working, namely the Web template, is handled differently from the tools and help windows with which you are working.
      You can show and hide the individual screen areas and toolbars using the View menu option.
      You can reposition the three toolbars and the Web Items and Properties windows as required. Depending on where you reposition the object, it is either anchored or appears freely as a toolbox.
      Since the Web Application Designer is a Multiple Document Interface Application (MDI Application), you can open and manage different windows with Web templates simultaneously. You can use the Window menu option to arrange the windows differently: cascading (overlapping), vertical, or horizontal.
Using the BEx Web Application Designer, you can create a BEx Web application (an HTML page with BI-specific content) easily.
       1.      Creating a Web template
The Web template is the starting point for creating a Web application. The Web template is an XHTML document that is used to define the structure of a Web application. It contains placeholders for Web items, data providers, and commands. A Web template becomes a Web application when the data is displayed in the Web browser.
During the design process, you change the Web template by embedding placeholders for Web items and data providers. You can keep track of these changes in the XHTML view.
To create a new Web template, choose Web Template ® New in the Web Application Designer menu bar. You can also create Web templates from the Select Web Template window. Choose Create New Web Template.
       2.      Setting the data binding/selection of the data provider
The data for your Web items is provided by data providers that you create in the Web Application Designer. You can assign a data provider to multiple Web items. The data provider concept makes it possible to change the data source of a Web item easily. If a particular data provider is assigned to more than one Web item, any changes made affect all the assigned Web items. By means of navigation (by changing the drilldown), the Web item always displays the current drilldown data.
A data provider is a dynamic object that returns current data for one or more Web items at runtime. You define the start view of the data provider by selecting a query or a query view. For more information about data providers, see Data Providers in BI Applications.
There are several ways to create data providers:
          a.      In the Data Provider section in the Web Items screen area
           i.       Select whether you want to create a data provider of type Filter or type Query View, and drag the corresponding line into the lower data provider section of the Web template screen area. The Maintain Data Provider dialog box appears.
           ii.       Assign a name to the data provider and make the remaining settings required.
In the dropdown box beneath the name field, you can also select or change the data provider type.
           b.      Using the New Data Provider symbol in the lower data provider section of the Web Template screen area
           i.       Double-click to choose New Data Provider. The Maintain Data Provider dialog box appears.
           ii.       Proceed as described under a. ii.
            c.      Using the General tab page in the Properties screen area
You can only use this option if you have already inserted a Web item into your Web template.
             i.       In the header of the properties screen area, select the Web item for which you want to create a data provider.
             ii.       On the General tab page, choose New Data Provider. The Maintain Data Provider dialog box appears.
The data provider is assigned to the selected Web item. You can also create more than one data provider, as described under c. The data providers are listed in the dropdown box under Assigning Data Providers. This enables you to assign a different data provider to the selected Web item.
The Maintain Data Provider dialog box appears under data provider: . You can modify or change the settings for the data provider here.
When you have created a data provider, it is assigned to the inserted Web item. Assigning depends on the order of the data providers in the inner structure of the Web template. See also 4.a.
       3.      Adding a Web item
The Web items in the Web Items screen area serve as templates. By dragging a Web item into your Web template, you create an actual version of the Web item; this is called an object. The Web item has a name and certain other default parameters that you can change as required (see also 4.).
You see the changes in the XHTML view. A Web item tag for the Web item and a data provider tag for the data provider (assuming you have created a data provider) were integrated into the XHTML as placeholders. Change the name of the Web item and assign a data provider to it. In the XHTML view, you can see that your settings have been written to the Web item tag. The layout you choose is also applied in the XHTML.
                            a.      Drag a Web item from one of the Web item groupings Standard, Extended, or Miscellaneous in the Web Items screen area to the Web template by using drag and drop. The Web item appears in the Web template.
Underneath the selection area for Web items and data provider maintenance, you see the help area, which provides explanations for the Web items and data providers. To display the texts for a Web item, select the Web item by double-clicking with the secondary mouse button. To hide the texts, proceed in the same way. When you hide the display of texts and select a Web item by single-clicking it, a quick info is displayed for the Web item.
                          b.      If you want to rename the inserted Web item, proceed as follows:
In the Properties screen area, choose Rename Web Item to the right of the dropdown box in which the inserted Web items are listed. Name the Web item by overwriting the default text under Name in the Properties screen area next to the dropdown box in which the inserted Web items are listed.
       4.      Specifying the properties of the Web item
                            a.      In the Properties screen area, choose the General tab page to make or change the assignment of a data provider for the corresponding Web item. See also 2.
                            b.      Choose the Web Item Parameters tab page to set the parameters for the selected Web item.
You can also set the parameters for the Chart Web item using the Edit Chart dialog box. Choose Edit in the context menu of the Chart Web item or Edit Chart in the Internal Display parameter grouping of the Chart Web item. For more information, see Editing Charts.
       5.      Adding additional Web items
To insert additional Web items, repeat steps 3 and 4.
     When you insert additional Web items using Insert ® Web Item, pay attention to where you position the cursor in your Web template. The cursor position determines where the new Web item is inserted. See also Designing the Layout of Web Templates. When you insert Web items using drag and drop, the position of the cursor is irrelevant.
      Make sure that you set the data binding and any Web item-specific parameter settings for the correct Web item. To make settings for a Web item, select the Web item in the layout view. In the header of the Properties window, the system displays the Web item for which you can change the settings. As an alternative to selecting the individual Web items, you can use the dropdown box to toggle between the attributes of individual Web items.
       6.      Designing a Web template layout
In the Web Application Designer, you create your Web template in the same way you do in various XHTML editors. See also Designing the Layout of Web Templates.
       7.      Changing the Web template properties
                            a.      To change the default properties of the Web template, select the Web template from the dropdown box in the Properties screen area.
                            b.      Choose the Web Template Parameters tab page, where you can change the parameter settings for the Web template.
For more information, see Web Template Properties.
       8.      Saving and executing the Web template
You execute the Web template in the Web browser (portal). The Web template becomes a Web application, which means the template is saved on the Application Server for ABAP and a URL is generated for this Web application.
At runtime (triggered by calling the URL), the BI tags are replaced by corresponding HTML with the information determined by the Web item and data provider settings. When this is done, the Web template on the Application Server for ABAP is accessed. Therefore, you must save your Web template before you execute it.
                            a.      To save your Web template, in the menu bar of the Web Application Designer, choose Web Template ® Save.
                            b.      Choose Web Template ® Execute to view your Web application in the browser (portal).
You must save the Web template before executing it in the Web browser. Therefore, when you execute the template, you are asked to save it if you have not already done so.
      To assign a Web template to a role, choose Web Template ® Publish ® In Role. See also Role Maintenance.
      To copy the URL of a Web template to the clipboard, choose Web Template ® Publish ® Copy URL to Clipboard. The Web template, however, must already be saved.
      To broadcast a Web template, choose Web Template ® Publish ® BEx Broadcaster. For more information, see Precalculating and Broadcasting Queries, Query Views, Web Templates and Reports.
Result
Your Web application is started and displayed in the portal, which in turn runs in a Web browser.
If you want to print your Web application, choose Print in the context menu for the executed Web application.

Guest users in Portal Activity Report

Hi All,
We have implemented Portal Activity Report in our portal. We are tracking only the pages and we have set the property Authentication Scheme to default for all the pages.
The reports are working fine except for the fact that the reports are showing up large number of anonymous users logging in as Guest for e.g. Guest 1, Guest 2, Guest 3 etc. Our landscape has no Anonymous users.
Can anyone tell me why the report is showing up large number of Guest users (Type - Anonymous Users) though we donu2019t have any anonymous Users?
How to get rid of these Anonymous Guest users in the Portal Activity Report?
Kindly help me to resolve this issue.
Regards,
Adren D'Souza

Hi Adren,
The AR shows what it gets.
The first posibility, is somewhere anonymous users do have access to content or some operations are being considered as anonymous.
I suggest to check all the properties which should disable the anonymous, whether there is any content which is exposed as anonymous:
1)Search the roles which are assigned to Guest user.
2)Make sure that the "Guest" user is disabled.
The second possibility u2013 there is an old data in DB tables.
What type of report are we discussing? Is this the "Details about the users who logged on" report?
If it is, check the WCR_* DB tables whether there any u2018au2019 type users.
If there is, I would recommend you to delete those entries ("WHERE USERTYPE = 'a'), it could be the old data, before you have applied the note.
Best Regards,
Victoria Gur
| Installed Base Development Engineer
| NetWeaver Portal Platform
| SAP Labs Israel

User Type Profiles

Hi Experts,
Could you please describe more detail about the new user type profiles in B1 8.8 SP00 PL17 ? Please help.
Regards,
Andres

Hi,
Are you asking about the license user type profiles ? If yes, here are the detail explanation about them:
Limited Logistics u2013
u2022Full authorization for sales documents (including A/R invoice) and items
u2022View only for sales quotations
u2022Full authorizations for A/P (except for A/P invoice)
u2022Full authorization for Business Partners
u2022Full authorization for Inventory and Production (except for price updates)
Limited CRM u2013
u2022Partial authorization for Administration
u2022Full authorization for Sales Opportunities and Business Partners
u2022Full authorizations for sales documents: quotation through return
u2022View only for A/R Invoice and Credit Memo
u2022Full authorization for POs and purchasing reports
u2022Full authorization for Service menu and reports
u2022Full authorization for item master data
Limited Financialsu2013
u2022Partial authorization for Administration
u2022Full authorization for Financials except Budget and Cost Accounting
u2022Partial authorization for A/P
u2022View only for Sales
u2022Full authorization for Business Partners and Banking
u2022View only for Inventory
JimM

Open source user friendly SQL Qyery+Report Builder

hi guys
Please help me find any link from where i can download OpenSource user friendly SQL Qyery+Report Builder
thanks

One would hope it was!
it is not possible to give everything that the OP may request. The closest match, now that is workable.

How to allow normal/regular users to view a report

I have been compiling reports in MS SQL 2012 Reporting Services. the URLs is
http://test_report:80/reports. I have no problem with viewing the reports because I am an admin but normal users are getting access denied. this is how I assign permission to user. Open Reporting Services
Config Mnger --> Connect --> Click on Report Mnger URL --> click on
http://test_report:80/reports --> Open a another folder called Reports. In this "Reports" it has many reports. --> Click on Folder Settings --> Click on Security --> Click on "New Role Assignment" -->
In "Group or user name" text box, I entered user network computer login name, such as: domain_name\bambi --> Ensure "Browser" is checked --> Ok. I send this weblink to users but they cannot open it because of either access denied
or not have permission.
http://myservername/Reports/Pages/Report.aspx?ItemPath=%2fCorp_Reports%2fReportOfTimeInLieu. I am unsure why users cannot view my reports. Please let me know if I had missed any step(s). I use the Report Builders in Reporting Services
Config Mnger to compile reports. Regards,

so this web link will lead me to Home page:
http://myservername/Reports/Pages/Folder.aspx.
at the home page I have folder called Reports:
http://myservername/Reports/Pages/Folder.aspx?ItemPath=%2fReports&ViewMode=List
inside Reports folder, I have multiple reports, ie:
http://myservername/Reports/Pages/Report.aspx?ItemPath=%2fReports%2fReportOfTimeInLieu,
http://myservername/Reports/Pages/Report.aspx?ItemPath=%2fReports%2fReportOfVacationTime,
http://myservername/Reports/Pages/Report.aspx?ItemPath=%2fReports%2fReportOfSickDays,
http://myservername/Reports/Pages/Report.aspx?ItemPath=%2fReports%2fReportOfConferenceDays
On Home page I click on Folder Settings --> Security --> New Role Assignment --> Group or User name: domainname\bambi --> Role = Browser
On Home page I click on Site Settings --> Security --> New Role Assignment -> Group or User name: domainname\bambi --> Role = System User
On Home page I open Reports folder --> Site Settings --> Security --> new Role Assignment --> Group or User name: domainname\bambi --> Role = System User
Is this how I enable user bambi to 1) enable to open Reports folder and also browse for reports in Reports folder 2) enable user bambi to execute all reports in Reports folder.
Problem: user bambi was able to open Reports folder and see all reports saved in it; however, bambi gets a blank page upon selecting a report and open/run it. bambi should see company logo and report name. It was a blank white page.
What did I do incorrectly?
Thanks,

0 down vote favorite share [fb] share [tw] How to hide cut/copy/paste/Replace- menu on the UIWebView when it is being displayed over the keyboard. Detail: I am having a HTML from, having text box, displayed using UIWebView. If user types in text b

How to hide cut/copy/paste/Replace… menu on the UIWebView when it is being displayed over the keyboard.
Detail: I am having a HTML from, having text box, displayed using UIWebView. If user types in text box it shows the keyboard. Now If user tap and hold on text box it shows a popup menu. Now while keyboard and pop up are being displayed user scrolls the view. At this time it shows pop up over the keyboard which I need to hide.
I tried setMenuVisible of UIMenuController when popup rect and keyboard rect intersects each other on viewDidScroll but it didn't help me.
Any clues will help a lot.
Thanks.

You are more likely to get an answer if you post programming problems to the Developer forum. This forum is intended for normal user level problems.

Creation of user type

hi
i am trying to create a user type AGENT. i did it but when user created and assigned to AGENT. when i click on submitt button it showa an error
IAM-3050056 : The specified value Agent for attribute Role is not one of the predefined values
please solve the problem. and tell the process how to cretae in 11g
regards
avinash

After adding this value in Lookup, you need to restart of OIM server is nee ded

User type in SUIM report

Similar Messages

Maybe you are looking for