Username and password problems with CS3

I have Dreamweaver CS3 Version 9.0 Build 3481
When I close Dreamweaver and reopen it I lose any usernames
and passwords for FTP.
How do I solve this? The 8.0.2. Updater does not work for my
version.
Thank you

Adobe got back to me and gave me some info I'll share that
might help others who have this problem. YES the fix did work for
me, I'm running Dreamweaver 9 or the CS3 version and was losing
user name and password each time I re-opened the program.
You can find the fix at
http://kb.adobe.com/selfservice/viewContent.do?externalId=3491671c&sliceId=2
Basically it's a registry fix, appears when you have Explorer
7.0 installed.
Warning: Editing the Windows Registry incorrectly can cause
serious problems that may require reinstalling your operating
system. Adobe does not guarantee that problems caused by editing
the registry incorrectly can be resolved. Edit the registry at your
own risk.
1. Launch the Registry Editor by clicking the Start button,
choose Run, then type "regedit". In the Registry Editor, navigate
to this folder:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\
Explorer\User Shell Folders\
2. See if there is a key called AppData.
# Backup the Users Shell Folders registry branch as follows:
1. Right-click the Users Shell Folders folder and select
"Export".
2. In the "Export range" section, choose "Selected branch".
3. Save the .reg file to the desktop.
4. If problems occur after editing the registry,
double-clicking the .reg file will re-install that registry branch.
# If the AppData key is missing, then perform the following
steps. If the AppData key exists, then skip to Step 5.
1. On the right side of the Registry Editor explorer pane,
right-click in a blank area anywhere under the last key in the
list. You should get a context menu that says "New" with a flyout
menu.
2. In the flyout menu, select "Expandable String Value" and
name the new key AppData.
# Right-click the new AppData key (or the existing one if it
was already there), select Modify, and enter the following in the
Value Data field: %USERPROFILE%\Application Data. If the values for
the other keys in your User Shell Folders directory don't start
with %USERPROFILE%, then use the value that your other keys use.
For example, if your Local Settings key has a value of u:\Local
Settings, then try usingu:\Application Data.
# Open Dreamweaver, re-enter the FTP login information for
one of your sites, and see if the FTP login is now saved when you
close and re-open Dreamweaver.
Worked for me.
Thanks Adobe

Similar Messages

UserName and password check with sessions..

Hai all,
i hav sent username and password to login.jsp page to next servlet page, in servlet file create session and i will bound the username and password.so i will create for each user session and set the attributes..its working fine.
but problem is whn i hav enters username and password i want to knowexisting valid session users having this username and password.that is i want to enter the only one user with the same username and password.....i want to restrict the same user for two logins at same instant.....
i hope u understood my point to say...
pls giv the soln to this senario?
Thanks & Regards,
Suryakant

Hi,
You could use a HashMap stored in application scope or implement a Singleton-patterned class that has a HashMap as an attribute.
After valid username & password is entered, you should retrieve this HashMap and look for an entry using username(all username must be differents)
HashMap map=(HashMap)application.getAttribute("GLOBAL_HASH");
if (map.get(username)!=null){ //user was previously logged.
else{ //user has no been logged yet.
map.put(username, new Object());
}Be aware to synchronize all read/write calls to HashMap as well as implement session listeners Interface and methods to clean HashMap when session had expired and when user had logged out.
Hope this help.

IWeb username and password problem

I've published a few sites now using iWeb, and just ran into this problem for the first time. The site I'm working on when published now asks for my apple username and password (my apple email address and apple password, for itunes etc etc) instead of the username and password I enter in iweb for password protecting the site. It says something like 'the username and password for your mobile me domain is incorrect. and when I put in my email address and apple password, it works. All my other sites that I set individual usernames and passwords for are working fine.
Anyone know why it would be doing this? I did copy the pages from another site. could that be part of the problem?

Have you found a good solution to your problem yet? I had an issue like you describe, where I thought I had to enter my MobileMe user/pass when prompted when browsing.
The issue with passwords that I saw was when creating more than one site within a single domain.sites file. I have one public site without a password, and then the other several sites in this file do have passwords, and each of them has a different password. With this multi-site and multi-password configuration, I was confused why the passwords seemed to NOT be working.
The result seems to be that the LAST site published is the user/pass used for ALL of the password protected sites. So right now, after editing a page in one of my private sites, I publish that site, and then I ALSO re-publish the site with the password that I want. This way at least I know the password being used. But it's a single password used for ALL the private sites.

Web service username and password problems

Hi,
I am trying to create a client to consume webservices exposed on a secure .net platform that is SSL protected (https).
I am using netbeans 6 with WSIT support. When I create the web service and add the WSDL file - it comes up with the certificate that I then approve, but then just displays a IO Exception. When I access the WSDL through a browser, it requests a username and password (which I supply) and it works fine.
I've tried on Netbeans 5.5 but with no luck - it asks for a username and password (at least) but doesn't accept them.
How can I connect to an https web service that requires a LDAP username and password?
Thanks,
Brendan

I'm guessing that you are trying to call an EBS API and are using FND_WEB_SEC to test that the user account is valid in FND_USER first before executing the API call. In that instance, you'll likely need to use the Oracle Applications Adapter for EBS if you want to authenticate the user through FND_USER.
If you've not purchased that adapter, you could use a simple BPEL process, with a regular database adapter to firstly call the FND_WEB_SEC package to authenticate. Pass the response from eBS into a bpel variable, add a bpel switch based on the outcome of that variable either execute the API call or throw an authentication error if the call failed.
You can wrap all this up into one web service that then calls this bpel process, taking the username and password as as input parameters.
Phil

Storing encrypted username and password along with the Key into Windows Keystore

I have a WPf application and I need to allow the user to enter the username and password. Username and Password should be encrypted and store them with the key into the windows Keystore. I used the Cryptography class to encrypt the username and password but
I am not sure how to store them in the Windows Key Store.
This login is used for configuration purpose only. User enters and it is saved into the clients machine. As long these credentials are correct, we are going to allow this machine to call another API to download files.
I would really appreciate for any sample code. Basically, I need to store them in the registry and be able to call them to verify.

Data encryption and key management is certainly not a WPF topic so you are in the wrong forum but you could take a look at the ProtectedData class:
https://msdn.microsoft.com/en-us/library/system.security.cryptography.protecteddata.aspx.
It provides methods for encrypting and decrypting data on user or machine level. Please refer to the following link for more information:
http://stackoverflow.com/questions/4967325/best-way-to-store-encryption-keys-in-net-c-sharp
Here is another link on the subject that may be helpful:
http://stackoverflow.com/questions/7459069/where-to-store-sensitive-information-needed-for-an-application-to-run
Please remember to mark helpful posts as answer to close your threads.

Username and Password Problems accessing site

Yesterday I created a blog using iWeb 09 and published it and went with the option that visitors needed to have the user name and password to access the site. Friends and family reported that these wern't accepted and I had the same problem when I tried. Publishing and accessing using mobile me by the way. Removing the password UN option removed the problem. I have installed the latest update to the iLife 09 suite. This problem occurred to those using both mac and windows. Is this a bug?

Make your site private and add a username and pw, then publish your site. You will get a popup when it is done publishing which gives you the option to announce your site. If you choose that option the user name and pw will be sent to those you choose. If you opt to have people visit your site, they will need the username and pw that you made youe site private with. Hope that helps.
Smokenaxs

Username and Password problem when trying to conne...

I decided to try and connect to a BT Wifi hotspot for the first time the other day, but when i enter my primary bt usename and password it says that the username and/or password is incorrect. I know they are the correct ones as i can log into the bt wifi website from my pc at home and it confirms that i have infinity 2, am opted in to the wifi scheme, and shows that i havent used any minutes yet.
I have tested this by connecting to the wifi hotspot that my own router puts out as a test, but it gives the same error.
I was wondering whether it may be because i have been with BT for quite a while and my primary email is an @btopenworld address which is causing some issues?
Thanks in advance for any suggestions.
Solved!
Go to Solution.

You've probably answered your own question. BT Wifi will only accept btinternet.com email addresses from BT Total Broadband customers; no problem though as the domain name is interchangeable with btopenworld. (In fact to access BT Wifi you only need to enter your user name and can omit "@domain".)
You can click the white star next to this message if you think it was helpful.

Username and password problem

New to apex with new install
Successful install of apex --- verified logs
Completed all of the post install tasks 4.1 thru 4.2 of the read me file with success
Unable to log on to
http://host:port/apex/apex_admin
http://host:port/apex
Receive unauthorized with all username/password attempts
4.8.2 of readme states a declared password --- I did not declare any password for apex
Please assist

Thanks for the reply
I don't recall providing a password for apex at any time. This is put on a fresh install of
Oracle Database 10g Release 2 (10.2.0.1.0) for Microsoft Windows on a Windows XP box
The db is accessible and up and running. The install log from apex provided no errors and provided the message
Thank you for installing Oracle Application Express.
Oracle Application Express is installed in the FLOWS_030000 schema.
Not sure where to go from here --- new to apex
Any assistance would be helpful

Username and password problems

All data appears To be correct. Mail appears at log on despite statement that password/username is wrong. What can be done.

You have told us "all data appears to be correct, but you haven't told us what you are trying to do but are not having any success with.
Mail appears at log on. Where?
"What can be done" .... About what? You can't get mail? You can't send mail? Both?
Are you in the correct discussion forum? Using iPad?

Auto login and password problems with Safari after OS 7.0.4 update?

Hi all,
I updated my IPad 4 to OS 7.0.4 , now Safari won't auto login to my favorite forums and won't remember my user names or pass words. I checked in Safari settings and Names/passwords and auto fill are on. Have restarted a number of times but no change. Any fixes?
Thanks.

Make sure Private Browsing is off.
Tap "Private" on Safari Screen to disable Private Browsing. When top of screen is white, Private Browsing is off.
http://i1224.photobucket.com/albums/ee374/Diavonex/547958b4a8c01ac084dd6649e8386 a0f_zps12fa0cca.jpg

Changing DB username and Password for APEX

Hello Guys:
My APEX application is currently connected to the Main database, and now the business decided they want a user to be created with the main database only for APEX.
My main database is called ARRA, and user within the ARRA schema called ARRAAPEX was created given a diffrent username and password.
I see in the Administrative services I can only tell it to which schema to connect to, but where do I specify the username and password for the database user to be used by APEX?
Thank You For Your Help
Adel

Thank You for your reply Roel. What I meant to say is Logging to the ARRA schema using the username and password associated with ARRAAPEX would allow me to see the Date last edited field that has been added to the ARRAAPEX. ANd I am not able to see that at this moment becuase I am logging to to ARRA using the ARRA username and password.
When we setup a workspace and then associate a schema with that workspace, where do I specify the username and password that the workspace should use to access the schema? Or if a username and a password are not needed then how does the workspace access the schema?
Thank You
Adel

Getting the Username and password Of Enterprise Portal in WebDynPro

Hi Friends,
          I have developed one webdynpro application to read the excel sheet from KM Repository. i have used URL to open the connection to that excel file and to get the Inputstream.
          While opening the connection to the excel, I've hardcoded the username and password. I need to get the username and password of the user who login into the Enterprise portal and runs that application. then i need to pass that username and password along with URL of the Excel sheet.
          Could you people find the solution and replied to me. I am waiting for your bright answer.
Thanks and Regards,
Sandeep Kumar Bonam.

A very standard question in this forum.
Refer this :
Re: How to get User Id in Web dynpro application
Regards,
Subramanian V.

Invalid Username and Password on 10.7 SMB shares

Getting "Invalid Username and Password" message when connecting to SMB shares hosted off a Mac OS 10.7 Lion machine from Snow Leopard or other OSes? Even though you know you are using the correct username and password? With the new SMB in OS X 10.7 Lion you now have to specify the name of the computer your connecting to IN the username field of the prompt or else it won't connect. Kind of like Windows. Took me a while to figure this out so I figured I'd post this here.
i.e.
instead of:
Use:

Thanks for all of your advices. I want to say:
1. I just created this new database yesterday and created SYS password during database creation from another clinet machine in my office. All connections are working. This is why I don't want to change the password at this moment. If I re-create password file, will this affect another client machine in office to connect to DB as sysdba?
2. From server, I can connect. I used the same sys/syspassword as sysdba. If the password is wrong, I would not be able to connect from server.
3. When I tried to connect from remote client machine, I do connect with string like: SQL:> conn sys/syspassword@mydb as sysdba. But it didn't work and return ORA-01017 error.
4. I have other 4 databases on different servers. I can connect from the same remote client machine through SQLPLUS and TOAD with sys as sysdba and system.
Please advise more. Thanks.

Problem with username and password

I've been trying to set up a new back up from scratch, and after losing my network and wifi connection, I just about have it all working again.
I have wireless connection, and I have the TC appearing correctly in Airport Utility, green light, reporting no issues, and seemingly ready to go.
It shows up correctly when I select disk in TM's system preferences, and it shows up and connects OK i n Finder, under shared items.
However, when I try to initiate a backup, its reporting a problem with the username and password, even though I'm entering the correct password.
I've checked it in the keychain, changed it in AU to be sure etc, and when I enter a wrong password, it just tells me its the wrong password, rather than this longer message explaining there's a problem with the username or password.
So I guess it could be with the username, but not sure what that might be - any ideas?
The only thing I can think of is that the name appears as Time Capsule b7e45c in AU, but as Iain MacDonald's Time Capsule on Time Capsule b7e45c in TM's system prefs.
Message was edited by: Iain MacDonald1

Exactly the same here...error 107 is reported when I try to back up.
There are 4 computers sharing the time capsule and only one of them reports this error.
Is there a way to remove the sparsebundle and start again for this computer without having to lose all the others?

Problem with iWeb asking for username and password to access my public site

Today for some reason anyone trying to access my site is being asked for username and password. I have made no changes that would require a password. My site has always been public.

I am having the same problems. My site is public, I checked the settings on the public folder on MobileMe to ensure that it was public and did not require password protection either. But for some odd reason, even though I didn't change anything, my site's pages seem to require a user name and password to get into them. If one continues to click cancel, the page continues to load.
This does not happen every single time, but it happens more often than not. I have tried this with my iMac, Macbook, as well as my iPod Touch, and I get this on all machines. My brother has tried logging in from another location using his Macbook Pro, and he gets the password prompt as well.
I tried turning on password protection to the site and uploading the changes, then disabling password protection and reupping the changes once again. I've tried uploading entire site, instead of just changes, but the problem continues to persist. I definitely need this issue solved since this site is important to me.
The site url is: http://www.globalwinetour.com
Does anyone have any suggestions to rectify this, or does anyone have any idea what is causing it? Am I missing something here? Am I doing something wrong? Please help me out!
Many thanks in advance!

Username and password problems with CS3

Similar Messages

Maybe you are looking for