Users created in ABAP tool cannot login to Portal
Hello,
I have created a user in abap and assigned them the role SAP_J2EE_ADMIN but cannot login into Portal (Message: User authentication failed) with that user. If I login to portal as J2EE_ADMIN and search for that user I get "No element found." Is there something that needs to be done to get users into Portal? Does authentication not occur against the abap system? Also is the J2EE_ADMIN user only valid within portal and not the abap backend?
I am using EP7.
Thanks for any help.
Hi Kelly,
I changed it under System Administration>>System Configuration>>UME Configuration>>ABAP System tab. If you read ealier in this thread however, I could not restart the j2ee server after that....so change it at your own risk!
If you do change it and cannot restart, go into the config tool and navigate to Global server configuration >> services >> com.sap.security.core.ume.service and find the ume.r3.connection.master.client key. Change that back to it's original value. I was able to restart after that.
Hope that helps.
Similar Messages
-
Hello All,
I have WAS with ABAP + JAVA [EP7], Hence using <b> dataSourceConfiguration_abap.xml</b>. as a datasource file in UME.
As per my knowledge i cant create users from Portal hence I have created users in ABAP Stack but I am not able to view these users from Portal ?
I have chaecked the entry in Configtool this file is maintained as Datasource.
Please Guide me what may be the reson for this ??
Is it possible to add Users from portal if Datasource is ABAP Stack ??
Waiting for reply!
Thanks,
Smita.Hi Smita,
Please go through these links:
UME configured to use SAP ABAP
For the configuration using config tool : http://help.sap.com/saphelp_nw04/helpdata/en/49/9dd53f779c4e21e10000000a1550b0/frameset.htm for general remarks using this config and see http://help.sap.com/saphelp_nw04/helpdata/en/0f/bdd93f130f9115e10000000a155106/frameset.htm for changing the config.
Check out the section "Read-Only and Read-Write Access to the ABAP User Management.
This link would also be useful. This link talks about <b>User Management of Application Server ABAP as Data Source</b> : http://help.sap.com/saphelp_nw2004s/helpdata/en/49/9dd53f779c4e21e10000000a1550b0/frameset.htm
Hope this helps.
Regards,
Sunil -
Exchange 2010 - Users in a restricted OU cannot login to OWA externally only - internal works
I have an OU setup where user in this OU have Log On To... rights have restricted which computers they can log onto.
This is the only restriction other than some IE browsing settings via GPO. The problem for these users is that...
They cannot login to OWA externally using the https://mail.domain.com/owa - it continues to prompt for authentication.
They CAN login to the same URL internally.
Troubleshooting...
I did give them Log On To... the MAIL SERVER rights.
Other users can login that are NOT in this OU.
May have started after SP3 for Exchange was installed.
Have rebooted.
HELP?Hi,
The Log On To setting will specify a certain computer to access a user account. Please change this user can log on to
All computers in ADUC to have a try.
Thanks,
Winnie Liang
TechNet Community Support -
AD user with no role assignment cannot login
We have created AD users that are being authenticated through OBIEE 11g. In the AD we currently have the user, password and group information associated with all the users created.
As per system behavior if an user's group is not mapped to a role within the EM, it should automatically be tagged with the authenticated-role which being a part of the 'BIConsumer' role will give the corresponding privileges to that user. This does not seem to be happening. Any insights on why this would be the case?
Additionally - If there is a group associated with a AD user within the active directory itself, is it mandatory that the AD groups be associated with a role? What I mean by this is, if we have RPD level init block to map authenticated users to custom database roles imported within the RPD and EM, would they not work unless there is a direct AD group to role assignment?The RPD had no access set for "Authenticated Users" and "BI Consumer Role" for all subject areas as part of the presentation layer permissions, hence unless a user was assigned to a role that could access either one of the subject areas the default authentication would not work.
-
Created new workspace, user created OTN account but cannot access workspace
hi,
i recently created GFW_SYSTEMS_TEAM beehiveonline workspace.
i added 4 external users including myself as an external user using my gmail account: [email protected] so i could verify the process from an external user point of view
i created my OTN account and verified it but cannot access the workspace using this login.
when i check the users in beehiveonline-apex i see that all users are verified.
when i check the users in the workspace, 2x external users are missing but my gmail user is there
when i check the ~BOLADMIN tool i see that my gmail user is missing - only my oracle account is visible; the other 2x external users are also missing...
my oracle and gmail email addresses are similar : neil.pritchard@~ oracle.com, gmail.com
i am accessing from my secondary oracle laptop (OBI); not on vpn
can you tell me if there are any known conflicts with the above setup?
more info:
OS: XP SP2; browser IE8
when accessing teamcollab or workspaces i get 'Internet Explorer cannot display the webpage' during login authentication
best regards
Neil
Edited by: 972236 on 20-Nov-2012 05:49Neil,
we spotted some provisioning scripts that had failed and are re-running them now - hoefully the extra users will be in the group/workspace soon. The 2 emails for you will not be a clash as they are valid and unique.
Phil -
Create new domain but cannot login
I'm using Directory Server 5.2, Messaging Server 5.2, IDA 45
I installed Messaging Server and I'm using domain itc.my, then I created several accounts under the new domain and it worked fine..I can login, sent and receive emails..then I decided to create a new domain, stud.itc.my using the command imadmin domain create...
imadmin domain create -D serviceadmin -d stud.itc.my -H mailhost.itc.my -n itc.my -w xxxx
I managed to create the domain....then I add several new user accounts under the new domain using the IDA...when I try to login Messaging Server using the new accounts, it's give error message
Invalid username or password
What steps did I miss to create a new domain?for any domains other than the "default domain", your login must include the domain:
userid@domain
instead of
userid -
Users from a different domain cannot login
Hello Everyone,
We have a sharepoint 2010 in domain A. Users are in domain A and domain B and there is a bi-directional trust between the two domains (belonging to 2 different forests).
Users in domain A have no problem accessing the SharePoint.
Users in domain B keep having IE prompting them for credentials and after 3 attempts lead them to a blank page.
The people picker tool can easily find users in domain B and then assign them permissions, but there seems to be an issue when authentication occurs.
So far there is no DNS or network issue has the site name is well resolved and a nslookup of the site returns the good information (right IP address).
Thank you for your help ! :)Can you confirm if you're using Constrained or Unconstrained delegation?
FYI new cross-forest functionality was added with Server 2012, but all of your DCs must be running 2012 or higher:
http://technet.microsoft.com/en-us/library/hh831747.aspx
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
New users created in APEX can't login to new App
I've imported an APEX application that I created with the downloaded version of APEX (2.1.0.00.39), into apex.oracle.com. I tried to create a new user for the application. With a NULL default schema (meaning it should have access to any schema), no user I seem to create though is able to log in to the application. It says invalid credentials.
When I create a new user, does that user go through some sort of validation process by Oracle and isn't valid until Oracle does it's magic tap on the newly created user?Hi Tyler,
As you have created application users (as opposed to database users) is your application using "application authentication" or is it using "database authentication"?
You can check which one is current on the application's "Shared Components >> Authentication Schemes" and change it if required.
Regards,
Mike -
Using database users to login on portal
Hi.
i'm about to begin to develop a portal. I've just created the database and users.
Can anyone tell me how can i use users that i have created on a database, to login on portal, without having to create them again on portal?
Or can anyone explain me the right way to do it?
Thanks.Don't do it man! Don't do it!!
Seriously don't create your own tables, portal is tightly integrated with OID, so you HAVE to synchronize with OID,SSO and portal anyway.
http://otn.oracle.com/docs/products/ias/doc_library/90200doc_otn/index.htm
Look here under management/security and read chap 5 of the SSO admin guide. Also the OID developers guide and admin guide and that should get you started or scare you off your present course :) -
Hi,
from today morning our user facing problem,
no one can login into portal, when use enter user id and password in logon page then press to login, the logon page appear agains without any message?
what could be the reason?
EP version 7.0
database : SQL 2005
regards,
kinjalHI,
look like problem with keystorage.
open J2EE visual Admin tool from following location
<drive:>\usr\sap\SID\JC<inst_no>\j2ee\admin\go.bat
connect it.
expand server -> services -> click on Key Storage -> under view select TicketKeystore
delete SAPLogonTicketKeypair and SAPLogonTicketKeypair-cert and create it again with CN=SID,OU=SAP Web As,O=SAP Trust Community,C=IN
C= your country
restart the portal server.
regards,
kaushal -
Some Users cannot login via Lync 2013 windows client
Hi,
I have a Lync 2013 FrontEnd server, DB server and Edge Server.
Since last noon we are facing a mysterious issue. Its as below.
( I have just entered into Lync administration)
User A and User B, both were able to login to lync till yesteday noon on their individual PC, any PC or mobile (windows, android, mac) with any version of Lync client, inside and outside the organization.
Last noon User A reported that he is facing an issue that whenever he logs in to lync 2013 client he is automatically logged off in 2 to 3 seconds. Then again logs in automatically and again loggs off in 2-3 seconds. and thats all is happening again and
again. The message he is is getting after he is logged off is "The connection to the server was lost
. Reconnecting. Current calls may continue, but with reduced functionality".
But at the same time he was able to login from other computer and his mobile device. At the same time, User B is not facing any issue on his machine.
Then User A tried to login from the User B's computer and there also he faced same issue. Then i asked User B to login on computer of User A and what i see is User B is able to login on User A's computer.
What is concluded from the observation is, User A cannot login from lync client 2013 from any computer inside and outside of my network and can login from any other client/version/platform inside or outside of my network.
What i checked for is Client Version Policy of User A and User B, but both are same (Automatic). Below is my client version policy and i am using client version 15.0.4605.1000
In Sing In Logs. (By Right click on system tray icon of lync) i got below information.
Error-1
In Windows 8, event viewer i am getting only Event ID 1 or 12 which says, "
The description for Event ID 12 from source Lync cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Lync
Thanks, Rishi Pandit.The issue has been resolved by removing an entry from "Trusted Application Server". This application server was being used for Polycom VC infrastructure integration with Lync.
As per Task 4 section in
Polycom and Lync Integration Documentation we have to use below-
http://support.polycom.com/global/documents/support/strategic_partner_solutions/Polycom_UC_Microsoft_Deployment_W8.pdf
Use the New-CsStaticRoute command to set up a static route for the RealPresence
Collaboration Server system.
$route = New-CsStaticRoute -TLSRoute -destination rmx.corp.local
-port 5061 -matchuri sipdomain.com -usedefaultcertificate $true
where rmx.corp.local is the FQDN of the RealPresence Collaboration Server SIP signaling
domain and sipdomain.com is the name of the Trusted Application Pool you created.
but this was wrong.
we used sip.domain.com and issue got resolved. Polycom forgot one (.) dot between sip and domain.com which ruined us.
Thanks.
Thanks, Rishi Pandit. -
ERROR: The new SAP tools in /usr/sap/DEV/EHPI/abap/exe cannot connect
Hi All.
I am attempting to upgrade my ECC 6.0 EPH3 system to EPH4.(System 'i' V6R1M1) I am hitting an error on phase PREP_INIT/CHECKPROF_INI which states 'ERROR: The new SAP tools in /usr/sap/DEV/EHPI/abap/exe cannot connect to your database.' The log file /usr/sap/DEV/EHPI/abap/log/DBCONNCHK.LOG contains more details about the failure.
At this point I see the processes has created to additional kernel libraries: SAPDEV70UP and SAPDEV70U2
I am logged on as DEVOFR per the documentation. DEVOFR is the owner of all objects in /usr/sap/DEV/EPHI.
Here is the error from DBCONNCHK.LOG :
4 ETW000 [dev trc ,00000] R3INLPGM: RmtExeLib is SAPDEV70UP 32507 1.917692
4 ETW000 [dbsldb4d ,00000] *** ERROR => CPFB755 occured: Program DBSLENCWT in library SAPDEV70UP not found.
4 ETW000 52633 1.970325
4 ETW000 [dev trc ,00000] DBSLENCWT: rc=9998, msg= 33 1.970358
4 ETW000 [dev trc ,00000] Wed Sep 29 09:55:53 2010 154488 2.124846
4 ETW000 [dbsldb4d ,00000] *** ERROR => CPF0006 occured: Errors occurred in command. 47 2.124893
4 ETW000 [dbsldb4. ,00000] *** ERROR => Command: CALL PGM(SAPDEV70UP/CHGR3SYSLE) PARM('*ADD') :Failed
When I display library SAPDEV70UP, DBSLENCWT is there and R3OWNER is the owner.
My DBSL is at the latest version for my environment.
Has anyone seen this?
Thanks in adnvance.
DianaFYI,
I got past this issue by upgrading the kernel first.
Thanks,
Diana -
User cannot login to Analytics 11g
I used the Weblogic administrative account to create my own user name and password in the security realm. I can use my user name and password to connect to the Enterprise Manager, but I cannot login to Analytics. I keep getting the error message "Unable to sign in. An invalid User Name or Password was entered."
Why would I not be able to log in to Analytics when I can log in to EM and Console?
Thanks,
KenWe were unable to determine why this occurred. Our solution, ultimately, was to shutdown the BI and WebLogic servers and restart the machine. When the processes restarted, all was well. It has not reoccurred.
Ken -
Help needed,
I am getting this message sandbox environment error no test user account, when downloading any application from iTunes, friend told me to sign out and sign in iTunes it might solve the problem , and i triyed it but still I cannot login I to my itune account. Same message keeping. Popping up, this problem started supricly today.Take a look at the instructions here.
http://www.technogal.net/2012/03/this-is-not-test-user-account-please.html -
Create a user through the API and "Prompt user to change password after next login".
Using the Adobe Connect Interface, I can create a user and check the checkbox to "Prompt user to change password after next login".
Can I achieve the same result using the API? The principal-update action doesn't offer such an option and, as far as I can tell, there isn't another action to do so either.
Thank you.You can achieve it as part of your application functionality, but not as a configuration option on WLS.
Maybe you are looking for
-
after the newest update ( iso 7) , i can no longer type in traditional chinese ( pin yin), does anyone else have the same problem?
-
After starting OEM and entering the username and password , it is showing error : java.lang.ClassNotFoundException: _database._instance._sitemap._sitemap
-
JFileChooser Network Folder Issue
Hello all Class : javax.swing.JFileChooser (network folders) J2SE : 1.4 OS : Windows I'm in need of urgent help for JFileChooser, scenerio is, currently when I do a open or save dialog using the JFileChooser it brings up the mapped network folders al
-
Having trouble with voice recognition.
I, have a touchsmart desktop. The product number is NY604AA-ABA-300-1017. I, have been having this problem for some time. This computer was purchased in Jan. 2010. Also when I go into the recipe area the voice recognition doesn't seem to work very
-
How do I open to message menu by default?
When I read my text messages, I have a tendancy to close the app with the last message I was reading open. The next time I open the app is opens to that message. I would prefer that it always opens on the menu list of recent text messages. (The p