Users unable to create or delete folders in migrated public folders using Outlook

We have an Exchange 2013 CU3 environment migrated from Exchange 2007.
The public folder migration was completed over the weekend.
The environment has several public folder mailboxes.
Post migration users are unable to create/delete new sub folders, or modify permissions using Outlook on any of the migrated public folders. Users can however create new top level folders using outlook. They can also create and delete new posts
in migrated public folders.
Admins are able to create folders and set permissions on migrated folders using the EAC.
Test User accounts used for testing are set to use the Primary Hierarchy mailbox as their default public folder mailbox.
Test Users have been given Owner permissions from the root down on the folders we are testing with.
We have tested with Outlook 2010 and 2013 getting the same "Cannot create the folder" error.

Further testing
We moved a top level folder from a secondary PF mailbox to the primary PF mailbox using the New-PublicFolderMoveRequest command in powershell.
After the move completed we could create new folders under the moved top level folder.
The top level folder that was moved had it's own sub-folders that we did not move to the primary mailbox. (We didn't move the whole branch.. Just the top level folder)
We still cannot create or modify the existing sub-folders after moving the top level folder.
We then moved the newly created sub-folder to a secondary PF mailbox.
At that point we could no longer create sub-folders in the folder form outlook.
From what I can tell you can only create new sub-folders in folders homed to the primary PF mailbox when using outlook.
Is this a bug or as designed?
According to this Tech ed presentation Clients connecting to a secondary PF mailbox should have folder changes proxy to the primary PF mailbox.. (See slide 10)
http://channel9.msdn.com/Events/TechEd/NorthAmerica/2013/OUC-B329#fbid=
Update : 2-5-2014
Not much new to report other than it appears that users need to be homed to the primary PF mailbox to delete calendar meetings.
Opened a ticket with Premier support.
Update 2-11-2014
Premier support continues to look into the issue. No ideas as to the cause yet.
2-24-13
Still no resolution from support or even a clue what is causing this.

Similar Messages

Migrating Public folders Fatal error MapiExceptionNoReplicaAvailable

I am trying to migrate our public folders from our old 2010 server to the new 2013 one. I have created the folders (one) as per instructions and can see the structure under the name "Public" with "Mailbox1" in ecp but when I run the command
to migrate and run the check I see the error referred to above.
The full output from the get-statistics command is
RunspaceId                       : b6e18ee6-c158-40d7-a6a6-18b04c3d43d9
Name                             : PublicFolderMigration
Status                           : Failed
StatusDetail                     : FailedMAPI
SyncStage                        : CreatingFolderHierarchy
Flags                            : IntraOrg, Pull, Suspend, SuspendWhenReadyToComplete
RequestStyle                     : IntraOrg
Direction                        : Pull
Protect                          : False
Priority                         : Normal
Suspend                          : True
SourceVersion                    : Version 14.3 (Build 123.0)
SourceDatabase                   : Public_Folders
SourceServer                     : EXCSRV03.Walton.local
BatchName                        :
OutlookAnywhereHostName          :
RemoteCredentialUsername         :
AuthenticationMethod             : Basic
RemoteMailboxLegacyDN            :
RemoteMailboxServerLegacyDN      :
BadItemLimit                     : 0
BadItemsEncountered              : 0
LargeItemLimit                   : 0
LargeItemsEncountered            : 0
FolderToMailboxMap               : {\}
QueuedTimestamp                  : 2/22/2014 10:18:37 AM
StartTimestamp                   : 2/22/2014 10:18:43 AM
LastUpdateTimestamp              : 2/22/2014 10:18:46 AM
InitialSeedingCompletedTimestamp :
FinalSyncTimestamp               :
CompletionTimestamp              :
SuspendedTimestamp               :
OverallDuration                  : 01:10:03
TotalFinalizationDuration        :
TotalDataReplicationWaitDuration :
TotalSuspendedDuration           :
TotalFailedDuration              : 01:09:54
TotalQueuedDuration              : 00:00:03
TotalInProgressDuration          : 00:00:06
TotalStalledDueToCIDuration      :
TotalStalledDueToHADuration      :
TotalStalledDueToReadThrottle    :
TotalStalledDueToWriteThrottle   :
TotalStalledDueToReadCpu         :
TotalStalledDueToWriteCpu        :
TotalStalledDueToReadUnknown     :
TotalStalledDueToWriteUnknown    :
TotalTransientFailureDuration    :
TotalIdleDuration                : 00:00:02
MRSServerName                    :
EstimatedTransferSize            : 0 B (0 bytes)
EstimatedTransferItemCount       : 0
BytesTransferred                 : 0 B (0 bytes)
BytesTransferredPerMinute        :
ItemsTransferred                 : 0
PercentComplete                  : 10
PositionInQueue                  :
PreventCompletion                : True
FailureCode                      : -2147467259
FailureType                      : MapiExceptionNoReplicaAvailable
FailureSide                      : Source
Message                          : Error: MapiExceptionNoReplicaAvailable: Unable to get replica list for the folder.
                                   (hr=0x80004005, ec=1129)
                                   Diagnostic context:
                                       Lid: 40487   EMSMDBMT.EcDoRpcExt2
called [length=53]
                                       Lid: 56871   EMSMDBMT.EcDoRpcExt2
returned [ec=0x0][length=192][latency=15]
                                       Lid: 52176   ClientVersion:
15.0.516.30
                                       Lid: 50032   ServerVersion:
14.3.123.2
                                       Lid: 23226   --- ROP
Parse Start ---
                                       Lid: 27962   ROP:
ropGetOwningMDBs [66]
                                       Lid: 17082   ROP Error:
0x469
                                       Lid: 18017
                                       Lid: 21921   StoreEc:
0x469
                                       Lid: 27962   ROP:
ropExtendedError [250]
                                       Lid: 1494
---- Remote Context Beg ----
                                       Lid: 26426   ROP:
ropGetOwningMDBs [66]
                                       Lid: 3010
StoreEc: 0x8004010F
                                       Lid: 3010
StoreEc: 0x8004010F
                                       Lid: 3650
StoreEc: 0x8004010F
                                       Lid: 53151
                                       Lid: 1750
---- Remote Context End ----
                                       Lid: 26849
                                       Lid: 21817   ROP Failure:
0x469
                                       Lid: 16814
                                       Lid: 20910   StoreEc:
0x469
                                       Lid: 61040
                                       Lid: 61104   StoreEc:
0x469
FailureTimestamp                 : 2/22/2014 10:18:46 AM
IsValid                          : True
ValidationMessage                :
OrganizationId                   :
RequestGuid                      : 9929f03f-d4a3-4a1d-945c-22d8bf04d3ca
RequestQueue                     : Staff_2014
ExchangeGuid                     : 4db20d25-f308-42d9-83f2-4c104e4aed62
Identity                         : RequestGuid (9929f03f-d4a3-4a1d-945c-22d8bf04d3ca), RequestQueue:
                                   (6a17b86c-969d-4c16-8210-1d52a28eaa76)
Report                           : 2/22/2014 10:18:36 AM [EXCSRV05] 'Walton.local/Technicians/Jonathan RUBINSTEIN'
                                   created request.
                                   2/22/2014 10:18:42 AM [EXCSRV05] The Microsoft Exchange
Mailbox Replication service
                                   'EXCSRV05.Walton.local' (15.0.516.29 caps:3F) is examining
the request.
                                   2/22/2014 10:18:42 AM [EXCSRV05] Connected to target
mailbox 'Public Folders
                                   (4db20d25-f308-42d9-83f2-4c104e4aed62)', database 'Staff_2014',
Mailbox server
                                   'EXCSRV05.Walton.local' Version 15.0 (Build 516.0),
proxy server
                                   'EXCSRV05.Walton.local' 15.0.516.29 caps:03DF07FFFF.
                                   2/22/2014 10:18:42 AM [EXCSRV05] Connected to target
mailbox 'Public Folders
                                   (309db159-1c82-407f-a8f2-5e3be77323da)', database 'Staff_2014',
Mailbox server
                                   'EXCSRV05.Walton.local' Version 15.0 (Build 516.0),
proxy server
                                   'EXCSRV05.Walton.local' 15.0.516.29 caps:03DF07FFFF.
                                   2/22/2014 10:18:42 AM [EXCSRV05] Connected to source
mailbox 'Public Folders ()',
                                   database 'Public_Folders', Mailbox server 'EXCSRV03.Walton.local'
Version 14.3
                                   (Build 123.0).
                                   2/22/2014 10:18:42 AM [EXCSRV05] Connected to source
mailbox 'Public Folders ()',
                                   database 'Public_Folders', Mailbox server 'EXCSRV03.Walton.local'
Version 14.3
                                   (Build 123.0).
                                   2/22/2014 10:18:43 AM [EXCSRV05] Request processing
started.
                                   2/22/2014 10:18:43 AM [EXCSRV05] Mailbox signature will
not be preserved for
                                   mailbox 'Public Folders ()'. Outlook clients will need
to restart to access the
                                   moved mailbox.
                                   2/22/2014 10:18:43 AM [EXCSRV05] Mailbox signature will
not be preserved for
                                   mailbox 'Public Folders ()'. Outlook clients will need
to restart to access the
                                   moved mailbox.
                                   2/22/2014 10:18:45 AM [EXCSRV05] Stage: CreatingFolderHierarchy.
Percent complete:
                                   10.
                                   2/22/2014 10:18:46 AM [EXCSRV05] Fatal error MapiExceptionNoReplicaAvailable
has
                                   occurred.
ObjectState                      : New
We only use one or our existing public folders and I'm wondering about simply unlocking the structure and restoring the emails from Veeam backup. I need to get rid of the old exchange server for disk space. However I'd really like to get the
migration done properly in case we turn out to need some further stuff.
Is there any way to debug this issue and get the migration done?
Many thanks

Hi Jay,
This issue occurs because there are some legacy system folders in the public folder database.
To resolve this issue, follow these steps:
Open the Public Folder Management Console.
Expand and then click System Public Folders so that it is highlighted and populates the Result pane.
Right-click schema-root and then select Remove.
Right-click all "OWAscratchpad" entries and then select Remove.
Migrate public folders to Exchange Server 2013. For more information about how to do this, refer to the following Microsoft TechNet article:
Migrate public folders to Exchange 2013 from previous versions
More details in the following KB:
Cannot replicate public folder to Exchange Server 2013
http://support.microsoft.com/kb/2866631
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

How to migrate public folders from legacy (exchange 2003 ) to exchange 2010

How to migrate public folders from legacy (exchange 2003 ) to exchange 2010 . Please suggest ?
Aditya Mediratta

Hi Aditya,
please find the answer in
http://blogs.technet.com/b/agobbi/archive/2010/08/04/how-to-move-public-folder-from-exchange-2003-to-exchagne-2010.aspx
Please ensure you have a working mailflow from Exchange 2003 to 2010, vice versa, before you begin.
Basically it's the same procedure as adding some PF Database in E2K3; just
run .\AddReplicaToPFRecursive.ps1 -server "Exchange 2010 Server" -TopPublicFolder "\" -ServerToAdd "Exchange 2010 Server"
Wait until some initial data started to replicate; after that run
Update-PublicFolderHierarchy -Server "Exchange 2010 Server"
After replication has finished you can do a
.\MoveAllReplicas.ps1 -Server "Exchange 2003 Server" -NewServer "Exchange 2010 Server"
Please let me know if it worked.
Kind regards,
Martin

Migrating public folders to exchange 2013 hebrew issue

I am migrating public folders to exchange 2013. half of them a named in hebrew.
The migration fails, the error is character related.
Is it possible at all to migrate hebrew named public folders?

Hi,
Did you got the error message mentioned in the following thread?
http://social.technet.microsoft.com/Forums/exchange/en-US/8b383a46-b710-4fc0-aa0b-e52f288cf93d/e2010-to-e2013-public-folders-migration-failed?forum=exchangesvrdeploy
If so, please check if they are mail-enabled public folders. If they are mail-enabled public folders, please make sure there are no invalid characters in alias.
Based on the description, you couldn't migrate public folders named in Hebrew, other public folders could be moved successfully. If I misunderstood your concern, please let me know.
If the issue persists, I'm afraid you need to rename these public folders in English.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Users with Owner rights are unable to create or delete sub-folders in folders they have appropriate permissions

Migration from 2007 to 2013 cu1 and then updated to 2013cu2v2. The issue i am seeing is any user that has owner rights cannot delete or create subfolders under any public folder on which they are set as owner. I have attempted to remove and readd users
permissions but still doesnt allow them to create or delete. Further troubleshooting has revealed if i create a new top level folder and then assign the users DefaultPublicFolderMailbox to the primary public folder mailbox then they are able to create and
delete subfolders. Has anyone else run across this. Right now the only way i can get around this is to create folders and delete folders for users in the ECP.

I think I found the solution for this.
When migration is finished and PublicFolder is 'assigned' to the mailbox databases/users, it is assigned random.
In my case, I had 11 different Public Folder mailboxes witch the PBF is distributed over.
Users was assigned 'random' default public folder mailbox. As long as the default PBF mailbox ISNT the top-level mailbox (witch in my case was PBF1), these random issues occured.
When I assigned the top-level Public Folder Mailbox as the Default Public Folder Mailbox, the issue was resolved.
TLDR; Get-Mailbox | Set-Mailbox -defaultpublicfoldermailbox <top-level PBF mailbox>

User Unable to Create Folders on Mapped Network Drive

I have a user who is unable to create folders in a directory where she should have all the necessary permissions to do so. She is a member of an AD group, and the effective permissions for that group include everything except:
Full control
Change permissions
Take ownership
The permissions are inherited from two levels up the tree. So I went to the level from which the permissions are inherited and selected the "Replace all child object permissions with inheritable permissions from this object" option in order
to force the permissions to be reapplied to the child objects. That fixed the issue for about half a day. The issue came back and as far as I can tell nothing was changed--she still appears to have sufficient permissions to create folders, and
yet she cannot. In fact, I established a remote connection to her machine and tried it myself (under her account) and was not able to create a folder at any level in the tree.
I have confirmed that one other user who is in the same AD group can create folders at any level of the directory tree. I have also confirmed that no explicit permissions are set on any of the folders in the tree. So the two users have the same
effective permissions, yet it works for one and not the other.
Any help would be greatly appreciated!
--Tom

My apologies for letting this issue set for so long. I got waylaid by a series of other more pressing issues and had to push this one to the back burner for a while, but I was able to come back to it and get it resolved today. I wanted to report
back for the benefit of others who may be reading this thread in the future.
I think there were two separate issues:
Conflicting permissions. The user was a member of two groups--one that grants the permissions needed and one that grants more restricted access. Her user account was also listed on the folder with more restrictive permissions than the groups.
She needs full access, so I removed her user ID and the more restrictive of the two groups.
It appears that the changes were not getting written to the subfolders. One of my co-workers suggested that I add her user ID with full control, make sure that change was made on all the subfolders, and then remove her user ID again and make
sure the removal was made on all the subfolders, just to verify that the changes were getting written to the subfolders. That worked.
I'm not sure why the second step was necessary, since the first step should have been sufficient to force the permissions to be re-written on the subfolders, but I could not get it working without doing both of these steps.
Thanks for the help on this issue, and again, my apologies for taking so long to get back to the group on this.
--Tom

Users unable to create tiered dashboards

I'm havng trouble with access rights on dashboard builder that I hope someone can help me with. Users are able to get to dashboard builder, and can even click on the Add button to add a new dashboard, but the Name field and Remove buttons are grayed out. They don't get the "specify menu or submenu to go to when..." option or the "customize the content and layout of this page..." option either. I have been through the CMC numerous times and can't find where to grant these rights to the user. Can anyone help point me to the right place?
Thanks in advance,
Richard

Further testing
We moved a top level folder from a secondary PF mailbox to the primary PF mailbox using the New-PublicFolderMoveRequest command in powershell.
After the move completed we could create new folders under the moved top level folder.
The top level folder that was moved had it's own sub-folders that we did not move to the primary mailbox. (We didn't move the whole branch.. Just the top level folder)
We still cannot create or modify the existing sub-folders after moving the top level folder.
We then moved the newly created sub-folder to a secondary PF mailbox.
At that point we could no longer create sub-folders in the folder form outlook.
From what I can tell you can only create new sub-folders in folders homed to the primary PF mailbox when using outlook.
Is this a bug or as designed?
According to this Tech ed presentation Clients connecting to a secondary PF mailbox should have folder changes proxy to the primary PF mailbox.. (See slide 10)
http://channel9.msdn.com/Events/TechEd/NorthAmerica/2013/OUC-B329#fbid=
Update : 2-5-2014
Not much new to report other than it appears that users need to be homed to the primary PF mailbox to delete calendar meetings.
Opened a ticket with Premier support.
Update 2-11-2014
Premier support continues to look into the issue. No ideas as to the cause yet.
2-24-13
Still no resolution from support or even a clue what is causing this.

F110 issue with multiple users - unable to create DME output

Hi
I have an issue, when i have multiple users executing F110 using the payment programs for DME output. program SAPPAYM that when a user tries to create DME output, that nothing is created.
it is as if the first person who creates a payment proposal then blocks the subsequent users from creating output.
we have found that the only way around this issue is to get one user executing a payment run at a time.
Only by getting all the other suers off the system and deleting any payment proposals can we produce the output.
any ideas??
Liz

Hi
I have an issue, when i have multiple users executing F110 using the payment programs for DME output. program SAPPAYM that when a user tries to create DME output, that nothing is created.
it is as if the first person who creates a payment proposal then blocks the subsequent users from creating output.
we have found that the only way around this issue is to get one user executing a payment run at a time.
Only by getting all the other suers off the system and deleting any payment proposals can we produce the output.
any ideas??
Liz

User unable to create queries on a multiprovider that exists in production.

Helo,
I have an issue where one of the users is unable to create queries in BE X on a multiprovider as the multiprovider is not geting listed .He gets the message "No objects found ".
I have Checked and the multiprovider exist in test and production
We replicated the same user's production id into a test id in Test system , and the user is able to see the mutiprovider geting listed to create the query
Not sure what is the problem in production, Any help on this will be very useful.
Regards
Jayu

Hi,
That User may not have the authorizations on that InfoArea and MP, so check it. See SAP help on Roles and Authorizations.
http://help.sap.com/saphelp_nw70/helpdata/en/44/599b3c494d8e15e10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/be/076f3b6c980c3be10000000a11402f/frameset.htm
Using RSECADMIN we can define the roles and authorizations in BI 7.
See some good posting sin SDN
First define the Roles as per your business and then assign the Objects i.e. Plant . Division etc..
http://wiki.sdn.sap.com/wiki/display/BI/AnalysisAuthorizationsinBI-+approach
http://help.sap.com/saphelp_nw70/helpdata/en/44/599b3c494d8e15e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/659fa0a2-0a01-0010-b39c-8f92b19fbfea
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a6c54319-0e01-0010-20a4-fb81ad32f330
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ded59342-0a01-0010-da92-f6b72d98f144
Thanks
Reddy

User unable to create recurring events on public calendar.

As the title says, I have a user that is unable to create recurring events on a public calendar.
I have given full rights to the user even as owner and it still will not create recurring events.
I'm convinced its a permissions issue, but have no idea where to look any more. I've temporarily added the user in domain admins just to test, and it works! Why would this fix it? Why is being set as owner of the calendar not enough?
She just keeps getting "You do not have permission to modify some or all of these items in this folder."

What rights does she have on the folder? You might try revoking her rights, then adding them back.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."
Rights were set to Publishing Editor.
I changed the permissions to none and even removed folder visible. Confirmed she had no access and added them back. Still fails.
Then removed user account from permissions list, confirmed, added back, tested, failed.

User unable to create 2nd query against new universe

Hello the Community,
We have a user who can create a single query from a choice of universes but when they try and add an additional query it doesn't allow them to a different universe - there are none appearing in the list.
Anybody know where I can fix this ?
Thanks
Cedric

It's a bit strange...
The user can select more than one universe during the creation of document ( according matrix security ) but cannot select another one universe as the first selected...
I ( I am Administrator ) grants the right of user on Top Security Level to fix it. View on Demand and View profile were not adequate.
thanks for your answer
Cedric

Unable to Manage custom forms in Exchange 2013 Public Folders or Organizational Forms Library

We've been doing custom forms development for many years and many versions of Exchange. This Exchange 2013 presented me with this new problem. We use Exchange 2013 with Cumulative Update 5, and Outlook 2007, 2010 and 2013. This problem
happens on all versions of the latest patched Outlooks.
1) I have successfully created a Public Folder and an Organizational Forms Library
2) I have granted myself "Owner" privilege to the entire public folder in both the IPM_Subtree and the Non_IPM_Subtree
3) I can publish forms into a Public Folder and the Organizational Forms Library
But, after the form is published, I can't manage it. The COPY, UPDATE, DELETE, PROPERTIES, and SAVE AS buttons are greyed out.
This does not happen for anything in my Personal Forms, my Mailbox or anything in Favorites that are locally cached.
Since the Organizational Forms Library cannot be "Cached" by putting it in Favorites, there seems to be NO way to even delete a form that is published to there.
The closest link that describes a similar (maybe same) problem is
http://www.michev.info/Blog/Post/14/Unable-to-manage-Forms-in-Outlook
A) Anybody else have the same problem?
B) Since it seems I only have control over forms in my Mailbox, and since Public Folders are suppose to be an mailbox, does anyone know how to setup a Public Folder so that you can login to it and attach it as a mailbox?
C) Does anyone know how to make the Organizational Forms Library cached locally so it can be managed?
J Awe TechBldrs Inc. www.TechBldrs.com

Easy steps to reproduce the problem.
1) create a public folder subfolder (do not create a Favorite)
2) make yourself and OWNER
3) publish a form to the subfolder (Open a any form and save it with any name)
4) use the Form Manager select the public folder subfolder that you are an OWNER of
5) select a form and see if the buttons are GRAYED out.
PLEASE TRY THIS ON YOUR OWN SYSTEMS TO VERIFY THE PROBLEM.
J Awe TechBldrs Inc. www.TechBldrs.com

DPM 2012 R2 Unable to create protection groups after Cluster Migration

Hi Team
we have an issue relating to DPM 2012 R2. In our environment we have a Hyper-V Cluster and we recently did a Cluster Migration since Hyper-V Cluster was upgraded to Windows Server 2012 R2.
Before the upgrade, Windows Server 2008 R2 Cluster was protected by DPM Environment. After we upgraded we are unable to Create new protection Groups existing the new cluster and when we select VMs it's not showing up any members.
Please let us know how we can solve this issue since the Cluster Nodes and the Cluster Name is different from previous Cluster, we were expecting that DPM would allow us to create new Protection Groups while preserving old protection groups for recovery later
if needed.

Hi,
you need to stop the Protection of the old HyperV Datasources
Clear the Cache of the Protectiongroup,
and read the new VM to Protectiongroup
Seidl Michael | http://www.techguy.at | twitter.com/techguyat |
facebook.com/techguyat |
youtube.com/techguyat

Migrating Public folders, can't log in

We are using a Linux Sles 10 Server with GW 7.02 beta. User migrations work
fine. We pre-create them and then update the Data Migration CSV file with
their User ID and Password assigned when they were created. Security is set
to low. However, we can figure out how to migrate the public folders. All
we get is "can't log in".
Ideas would greatly be appreciated as this is our last piece in moving from
Exchange to Groupwise.

I can't remember exactly how this works, but public folders get migrated to GroupWise as folders that are owned by a 'resource' object, and everyone is given rights to proxy into the resource's account. Resource objects in GroupWise need to have an 'owner' that is a valid GroupWise user. So, if you're having login issues, it may be something to do with the owner of the resource. The utility needs to log in as the user in order to make changes, so it needs to have the owning user's password available.
Is the owner of the resource(s) that will house the folders included in the CSV file? Is the password specified there?
It seems like if you let the utility create the users and generate random passwords it goes pretty smoothly. You don't have to manually edit the CSV file in that case.
>>> Pat H.<[email protected]> 4/12/07 7:17 PM >>>
We are using a Linux Sles 10 Server with GW 7.02 beta. User migrations work
fine. We pre-create them and then update the Data Migration CSV file with
their User ID and Password assigned when they were created. Security is set
to low. However, we can figure out how to migrate the public folders. All
we get is "can't log in".
Ideas would greatly be appreciated as this is our last piece in moving from
Exchange to Groupwise.

2007 SP3 to 2013 Migration - Public Folders Migration (-2147467259)

Hi Guys
I'm currently undertaking an Exchange 2007 SP3 to Exchange 2013 migration, and all has been going swimmingly so far. We've moved all mailboxes across and are at the final stages and just want to move the public folders across.
I've been following the instructions in: http://technet.microsoft.com/en-us/library/jj150486(v=exchg.150).aspx this article, and we have gotten up to stage 5 (Start
the Migration Request). The process gets around 20% of the way through, and from what we can tell seems to migrate all content from PF folders, however it then stops. I've posted an extract of the log below, which should show you the error we're
currently getting (it tries then exhausts retries & stops).
16/01/2014 9:13:15 AM [EX2013] Transient error MapiExceptionUnknownUser has
occurred. The system will retry (58/60).
16/01/2014 9:13:50 AM [EX2013] The Microsoft Exchange Mailbox Replication service
'EX2013.mydomain.local' (15.0.775.35 caps:3F) is examining the request.
16/01/2014 9:13:50 AM [EX2013] Connected to target mailbox
'db1f9a09-a4ab-435e-aedf-122095797a10', database 'Shared', Mailbox server
'EX2013.mydomain.local' Version 15.0 (Build 775.0), proxy server
'EX2013.mydomain.local' 15.0.775.35 caps:07FFCB07FFFF.
16/01/2014 9:13:50 AM [EX2013] Connected to source mailbox '', database
'EX05\Public Folders\Public Folders', Mailbox server 'ex05.mydomain.local' Version
8.3 (Build 327.0).
16/01/2014 9:13:50 AM [EX2013] Request processing continued, stage LoadingMessages.
16/01/2014 9:13:50 AM [EX2013] Copying messages is finished. Copying rules and
security descriptors.
16/01/2014 9:13:51 AM [EX2013] Transient error MapiExceptionUnknownUser has
occurred. The system will retry (59/60).
16/01/2014 9:14:25 AM [EX2013] The Microsoft Exchange Mailbox Replication service
'EX2013.mydomain.local' (15.0.775.35 caps:3F) is examining the request.
16/01/2014 9:14:25 AM [EX2013] Connected to target mailbox
'db1f9a09-a4ab-435e-aedf-122095797a10', database 'Shared', Mailbox server
'EX2013.mydomain.local' Version 15.0 (Build 775.0), proxy server
'EX2013.mydomain.local' 15.0.775.35 caps:07FFCB07FFFF.
16/01/2014 9:14:25 AM [EX2013] Connected to source mailbox '', database
'EX05\Public Folders\Public Folders', Mailbox server 'ex05.mydomain.local' Version
8.3 (Build 327.0).
16/01/2014 9:14:25 AM [EX2013] Request processing continued, stage LoadingMessages.
16/01/2014 9:14:25 AM [EX2013] Copying messages is finished. Copying rules and
security descriptors.
16/01/2014 9:14:25 AM [EX2013] Transient error MapiExceptionUnknownUser has
occurred. The system will retry (60/60).
16/01/2014 9:15:00 AM [EX2013] The Microsoft Exchange Mailbox Replication service
'EX2013.mydomain.local' (15.0.775.35 caps:3F) is examining the request.
16/01/2014 9:15:00 AM [EX2013] Connected to target mailbox
'db1f9a09-a4ab-435e-aedf-122095797a10', database 'Shared', Mailbox server
'EX2013.mydomain.local' Version 15.0 (Build 775.0), proxy server
'EX2013.mydomain.local' 15.0.775.35 caps:07FFCB07FFFF.
16/01/2014 9:15:00 AM [EX2013] Connected to source mailbox '', database
'EX05\Public Folders\Public Folders', Mailbox server 'ex05.mydomain.local' Version
8.3 (Build 327.0).
16/01/2014 9:15:00 AM [EX2013] Request processing continued, stage LoadingMessages.
16/01/2014 9:15:00 AM [EX2013] Copying messages is finished. Copying rules and
security descriptors.
16/01/2014 9:15:00 AM [EX2013] The job encountered too many transient failures (60)
and is quitting.
16/01/2014 9:15:00 AM [EX2013] Fatal error MapiExceptionUnknownUser has occurred.
Furthermore, in the event log, I get the following logged as the PF migration errors out:
Request '' (d0963f2b-9d8e-4470-924a-72749ca32a36) failed.
Error code: -2147467259
MapiExceptionUnknownUser: Unable to make connection to the server. (hr=0x80004005, ec=1003)
Diagnostic context:
Lid: 49064 dwParam: 0x1
Lid: 37288 StoreEc: 0x6AB
Lid: 49064 dwParam: 0x2
Lid: 49191 EMSMDBMT.EcDoConnectEx called [length=193]
Lid: 65063 EMSMDBMT.EcDoConnectEx exception [rpc_status=0x6D9][latency=0]
Lid: 62184
Lid: 16280 dwParam: 0x0 Msg: EEInfo: ComputerName: n/a
Lid: 8600 dwParam: 0x0 Msg: EEInfo: ProcessID: 4744
Lid: 12696 dwParam: 0x0 Msg: EEInfo: Generation Time: 0414-01-16T01:15:00.7170000Z
Lid: 10648 dwParam: 0x0 Msg: EEInfo: Generating component: 2
Lid: 14744 dwParam: 0x0 Msg: EEInfo: Status: 1753
Lid: 9624 dwParam: 0x0 Msg: EEInfo: Detection location: 501
Lid: 13720 dwParam: 0x0 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 4
Lid: 8856 dwParam: 0x0 Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp
Lid: 8856 dwParam: 0x0 Msg: EEInfo: prm[1]: Unicode string: EX06
Lid: 12952 dwParam: 0x0 Msg: EEInfo: prm[2]: Long val: 3749909585
Lid: 12952 dwParam: 0x0 Msg: EEInfo: prm[3]: Long val: 382312662
Lid: 45169 StoreEc: 0x824
Lid: 50544 ClientVersion: 15.0.775.34
Lid: 52080 StoreEc: 0x824
Lid: 44273
Lid: 49064 dwParam: 0x1
Lid: 37288 StoreEc: 0x6AB
Lid: 49064 dwParam: 0x2
Lid: 59431 EMSMDB.EcDoConnectEx called [length=193]
Lid: 34855 EMSMDB.EcDoConnectEx returned [ec=0x3EB][length=56][latency=15]
Lid: 59505 StoreEc: 0x3EB
Lid: 50544 ClientVersion: 15.0.775.34
Lid: 52080 StoreEc: 0x3EB
Lid: 1494 ---- Remote Context Beg ----
Lid: 22086
Lid: 27206
Lid: 17990
Lid: 16966 StoreEc: 0x8004010F
Lid: 32121 StoreEc: 0x3EB
Lid: 9486 StoreEc: 0x3EB
Lid: 1750 ---- Remote Context End ----
Lid: 51152
Lid: 52465 StoreEc: 0x3EB
Lid: 60065
Lid: 33777 StoreEc: 0x3EB
Lid: 59805
Lid: 52487 StoreEc: 0x3EB
Lid: 19778
Lid: 27970 StoreEc: 0x3EB
Lid: 17730
Lid: 25922 StoreEc: 0x3EB
Context:
Operation: ISourceMailbox.GetFolder
Operation: ISourceMailbox.GetFolder
OperationSide: Source
Public Folders ()
EntryIDs: [count:1, [len=46, data=000000001A447390AA6611CD9BC800AA002FC45A0300E76376BFA766CD4CB9725A08AC252BC90000000027220000]]
Folder: 'Public Root/NON_IPM_SUBTREE/StoreEvents{93ED8190-881A-40D2-B0FD-3615ADEB16CE}', entryId [len=46, data=000000001A447390AA6611CD9BC800AA002FC45A0300E76376BFA766CD4CB9725A08AC252BC90000000027220000], parentId [len=46, data=000000001A447390AA6611CD9BC800AA002FC45A03007943AF354860F8418A0338BB019906EE0000000000020000]
I've attempted to find some solutions, and searching for the respective error codes has suggested a couple of ideas, such as not being a PF Admin (checked), resource issues on source/destination servers (checked, and restarted for good measure), I saw mention
of a problem with NETBIOS resolution so added the source server into the host files (checked).
Any assistance would be greatly appreciated
Cheers

Hello,
Thank you for your post.
This is a quick note to let you know that we are performing research on this issue.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Users unable to create or delete folders in migrated public folders using Outlook

Similar Messages

Maybe you are looking for