Usertable error after adding a udf

I have a UI add-on that assigns values to a UDT by usertable object of the DI API, the problem is generated after adding a UDF from SAP menu and try to assign a value from the DI. The error is Invalida Field Name
My question is, is necessary to wait a while until SAP records the new field to be accessible by usertable?
Any suggestions?
oUserTable.UserFields.Fields.Item("U_" + colName).Value = respuesta;

Hi Ricardo,
As far as I know, you can use this field as soon as it is added to the usertable. But please make sure that this has been added successfully in your table and also make sure that ("U_" + colName ) is the same as it appears in SQL Server. Make sure that you are providing the right field name.
Hope it helps.
Thanks & Regards
Ankit Chauhan

Similar Messages

Time Capsule gives MobileMe/Apple ID password error after adding Express

I have a 1st Gen Time Capsule at the top of my network plugged into my cable modem. I just purchased one of the new Airport Expresses to extned my network.
I plugged the Airport Express in and used the iOS "Airport Utility" app to set it up. The utility (both on the the iOS and on my Mac) show the new Airport Express with a green light and connected. However, my Time Capsule now has a warning error with an orange light.
On the iOS device, it says "Unrecognized Apple ID or password--An Apple ID or password is incorrect. Enter the correct Apple ID and password and try again." Of course, on the iOS, there's no way to enter it, so I went to the Mac's Airport Utility (I have both 5.6 and 6.0, but I used 5.6). On the Mac's Airport Utility, the error says that the MobileMe member name or password is incorrect. (Note, wireless continues to work--I just have the error).
Since the Mac's utility asks to correct the MobileMe username/password, I type those in and let it update. I know that I am typing the correct username/password, but the error continues to occur. I could click "ignore this issue" on the iOS Airport Utility and all lights so green, but the issue shouldn't be there to begin with. I'd like to figure out what is causing the error. Is there another location that I should be entering the information?
I do have a separate Apple ID, but it's asking for my MobileMe credentials (which migrated over to iCloud).
It's bizarre that the NEW device has no errors and my wireless is still working. But the original Time Capsule which was working fine with no errors, now has an error after adding the new device.

Crazy, but attempting to fix the information in Airport Utility 6.0 worked fine--but it wouldn't work in AU 5.6.
It does seem odd that I couldn't attempt to fix the username/password issue from within the iOS app to begin with. It told me what the error was, but didn't seem to give me a place to edit the information.

Can't get around this error after adding second dataset...A scope is required for all aggregates used outside of a data region unless the report contains exactly one dataset

I added a dataset to an existing report and broke an aggregation. In the old (i.e. single dataset) report, this expression below worked fine. I wanted to get a distinct count of the vst_ext_id field when my educated field was like "VTE1*"
= CountDistinct(IIF(Fields!educated.Value like "VTE1*", Fields!vst_ext_id.Value, Nothing))
After adding a new dataset, this no longer works and I get the error " A scope is required for all aggregates used outside of a data region unless the report contains exactly one dataset". Having done some research online, I found that I
needed to specify my dataset explicitly and I thought this new expression might work, but still no success...
= CountDistinct(IIF(Fields!educated.Value,"DataSet1" like "VTE12*", Fields!vst_ext_id.Value,"DataSet1", Nothing))
Am I missing something? Based on online responses, this explicit dataset naming convention seems to help most people, but it isn't working for me.
Thanks in advance!
Brian

I found the answer. Apparently, my expression syntax was off. This expression does the trick...
= CountDistinct(IIF(Fields!educated.Value like "VTE12*", Fields!vst_ext_id.Value,Nothing),"DataSet1")
I just happened upon this particular syntax searching online. I was trying to specify the dataset name after each .value, but I never got that to work. This is the only time I have found this particular syntax online.

EVDRE error after adding new member - AFTER installing SQL 2008 R2 SP1 CU2

Hi guys.
We're seeing the same error as detailed in Link:[Re: EVDRE error AFTER expanding on a newly added member, sometimes....;
Basically, any new members that are added appear in the SQL tables, but throw out "EVDRE has encountered a problem..." when trying to use them.
Generally, this problem clear up if we leave the member overnight (although why this should be, I have no idea - the system does nothing extra overnight).
We have tried processing the cube, full processing of the application and even a server reboot, all to no avail.
However, the generally accepted fix for this is to upgrade SQL 2008 R2 to SP1 CU2 (SQL 10.50.2772)
This system was patched to that level before BPC was ever installed, precisely to avoid this problem.
This is not the first time that we have seen this behaviour.
I have experienced it in one other environment, which I keep meaning to rebuild.
These installations are in completely different environments. The only similarities are that they both use Windows Server 2008 R2 and SQL 2008 R2.
The issue only started to appear in this second environment today (we have 3 other environments with the same software version that do not have the problem).
It had been assumed before today that the first problematic environment might need a rebuild due to this issue being caused by some other factor.
However, this is now far too coincidental to be the case.
Has anyone seen similar issues even after patching to v10.50.2772, or does anyone have any suggestions at all.
I could really do with a quick win on this one.
Thanks

Hi,
i've had the same issue in the same days. I confirm that the issue appear after adding any member and it's clear overnight.
My system is different:
Windows Server 2008 NT 6.0 <X64> (Build 6002: Service Pack 2) Enterprise Edition
and Microsoft SQL Server 2008 Enterprise Edition (SP1) - 10.0.2841.0 (X64)
The issue appears in the last months.
It's occurs only on specific machine (always the same client), in the same moment other machines can open the same input schedule and expand without problem.
I've noted also that when I cancel the added member the issue disappear, the same behaviour with APShell.
I have the same configuration on development and test environment, same version of O.S. and SQL server, but there I don't have problem. The only difference is that these two environments are single server (application and DB server on the same machine) Instead, the production environment is multiserver (2 application server + DB server).
Maybe there is a service that take a long time for sincronization (it's triggered in the night?).
Could you verify if on some machine the evdre works fine and and that when you delete the added member evdre starts to work?
Kind regards
Roberto
Edited by: Roberto Vidotti on Dec 19, 2011 6:01 PM

Expdp has errors after adding patches set?

Hi there,
After adding Oracle patches set and upgrade the database from 10.2.01 to 10.2.0.3, we got the following errors:
UDE-00008: operation generated ORACLE error 31626
ORA-31626: job does not exist
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 79
ORA-06512: at "SYS.DBMS_DATAPUMP", line 2747
ORA-39086: cannot retrieve job information
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 79
ORA-06512: at "SYS.KUPV$FT_INT", line 1489
ORA-12805: parallel query server died unexpectedly
ORA-06512: at "SYS.DBMS_DATAPUMP", line 3712
ORA-06512: at line 1
Notes: expdp used to work in version 10.2.0.1.
now it has errors above in version 10.2.0.3
What should we do to fix it?
Thanks,

Check this metalink note:
EXPDP CLIENT GETS UDE-00008 ORA-31626 ORA-39086
Doc ID: NOTE:549781.1
Despite of the error stack, expdp may be run successfully.
Werner

Encounter error after adding an attribute to a new dimension in AWM.

After I added an attribute to a new dimension, I encountered the error as below.
I also cannot read the metadata from Jdeveloper after I create a cube using AWM.
Please kindly help!!
BI Beans Diagnostics(v1.0.2.0) 2005/9/15
===============================================================================
JDEV_ORACLE_HOME .......................... = C:\jdev1012_base
JAVA_HOME ................................. = c:\j2sdk1.4.2_02
JDeveloper version ........................ = 10.1.2.0.0.1811
BI Beans release description .............. = BI Beans 10.1.2 Production Release
BI Beans component number ................. = 10.1.2.52.0
BI Beans internal version ................. = 3.2.1.0.13
Connect to database ....................... = Successful
JDBC driver version ....................... = 10.1.0.3.0
JDBC JAR file location .................... = C:\jdev1012_base\jdbc\lib
Database version .......................... = 10.2.0.1.0
OLAP Catalog version ...................... = 10.2.0.1.0
OLAP AW Engine version .................... = 10.2.0.1.0
OLAP API Server version ................... = 10.2.0.1.0
BI Beans Catalog version .................. = N/A; not installed in BI_TEST
OLAP API JAR file version ................. = "10.1.0.2.0"
OLAP API JAR file location ................ = C:\jdev1012_base\jdev\lib\ext
Load OLAP API metadata .................... = Successful
java.lang.NullPointerException
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverIm
pl_92.setDimAttributes(MDMMetadataDriverImpl_92.java:1733)
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverIm
pl_92.getChildren(MDMMetadataDriverImpl_92.java:197)
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverIm
pl_92.addChildren(MDMMetadataDriverImpl_92.java:2687)
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverIm
pl_92.fillOlapObjectModel(MDMMetadataDriverImpl_92.java:2571)
at oracle.dss.metadataManager.server.drivers.mdm._92.MDMMetadataDriverIm
pl_92$LoadOlapObjectModel.run(MDMMetadataDriverImpl_92.java:3013)

I would post this on the OLAP forum as they should be able to help you diagnose this problem. The OLAP forum can be found at the following link:
OLAP
There is not much detail in your log, but I suspect that your OLAP mappings are incomplete or the maintenance of your dimension to load the new attribute data somehow failed. I would check the OLAP AWM build logs for more information.
Thanks
Keith
Oracle Business Intelligence Product Management
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
BI Beans http://www.oracle.com/technology/products/bib/index.html
Discoverer: http://www.oracle.com/technology/products/discoverer/
BI Software: http://www.oracle.com/technology/software/products/ias/devuse.html
Documentation: http://www.oracle.com/technology/documentation/appserver1012.html
BI Samples: http://www.oracle.com/technology/products/bi/samples/
Blog: http://oraclebi.blogspot.com/

Error after Adding Header Zfields to Item Level Screens?

Hi,
When I add SLA Z fields from Node BTAdminI to the SRQM_SLAPRO/SLASrvCtrView,. Contract related SLA data is not appearing and all fields are appearing in the mode of grade out in WEB UI.
Few of the fields are showing BTAdminI not bound as value.
In the same scenario for the few of the fields I am getting below mentioned error
BSP exception: Error converting to data object from ZZAFLD00002U
Same error I am getting after I added Zfields (From BTADMINH) to Item Level Screen too.
My doubt is Cant I add Header Zfields to Item Level Screens? Or/And Item Zfields to Item Header Screens
What can be possible what is not possible. Please get some clarity on this issue.
Thanks
Chand

Hi All,
I am new to IC WEB.
i am facing a problem while ading Zfield in Contact Screen using AET Tool.
i am getting the error as
BSP exception: Error converting to data object from ZZAFLD00001K
Please help me....
Thanks in Advance,
Swaraj
Edited by: swaraj sap on Oct 6, 2009 7:08 PM

SRDemo in tomcat 5.5.x got ERROR after added data bindings

hi all,
it is success to deploy the project into tomcat 5.5.x, and it works fine when no data bindings added into jspx.
after i added a data bindings,
it works find at embed OC4J, but not in tomcat 5.5.x
and tomcat comes this error:
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: javax.naming.NameNotFoundException, msg=Name SRPublicFacade is not bound in this Context
how can i bound the SRPublicFacade into tomcat5.5.x ?
Many Thanks!
Best Regards,
S. H. Wong
Edited by: user9218028 on Apr 13, 2012 10:04 PM
Edited by: user9218028 on Apr 13, 2012 10:09 PM
Edited by: user9218028 on Apr 13, 2012 10:13 PM
Edited by: user9218028 on Apr 13, 2012 10:14 PM

Please help,
Many Thanks.
Best Regards
Wong Sai Ho

Error after adding Child node

Hi Experts,
I have created a Data object by importing as "BAPI Wrapper" . It had a Parent node and a child node. Now i added one more child node.
But if i am activating this node it is giving below error.
Object not adequately specifiedError
Regards,
Abhishek

Hi Dhana,
I have deleted the child node and added these attributes in header so now i can activate this header structure but when i tried to activate BA after mapping , then it says
Invalid field mapping
But i have counter checked everything is fine even when i checked my BA with "Error check" button it didn`t give any error. Any idea how to sort it out.
Regards,
Abhishek

WEBI Report Error After Adding 2 New Servers to BOE

There were two new servers added to the existing BO enterprise application. Both these servers have the Web Intelligence job server and Web Intelligence report server services running on them. Eversince these servers have been added we have been encountering the following error
Creation Time: 1/11/2009 11:40 PM
Start Time: 1/11/2009 11:40 PM
End Time: 1/11/2009 11:40 PM
Server Used: LXW0D38C.Web_IntelligenceJobServer
Error Message: 0: (CS) :DBDriver failed to load : D:\Program Files\Business Objects\BusinessObjects Enterprise 11.5\win32_x86\dataAccess\connectionServer\dbd_oci8.dll (The specified module could not be found. ) An internal error occurred while calling the 'processDPCommands' API. (Error: WIS 30270) BOException caught:RESULT=80004005;WHAT=RefreshBatch failed
The job server mentioned in error message may not necessarily be job server created on the new servers. In the above example the server listed with the job server running on it has BOE installed on the C drive
I do want to point out that when I turn off the job servers and report servers on the newly installed machines this problem goes away
I am assuming that an old job server may assign a task the the new webi intelligence report server to execute a query and the problem shows up
Am I possibly missing a setting in the WEB Intelligence report server?
Is there something that can be done to fix the issue?
We are currently at BOXIR2 SP3.6 which is installed on Windows 2000 Server with SP4
Thank You
Shariq

Alan,
I used remote desktop to access each of the servers and I am able connect to the oracle databases that the BOW accesses from both SQLPLUS as well as ODBC. I also opened up designer and was able to successfully connect to each of the universes
I have placed the -trace option on the WEB Intelligence Report servers and going to try to find what kind of output this newly installed BOE software generates
Can you think of anything else?
Thank You
Shariq

Serialization Error after adding a new field to BPM Process

Hi,
I have a BPM Process to which I added a new attribute userid and consuming the BPM process in a web dynpro application, I created a model using the BPM Process's Web Service but getting a serialization error that the model does not have a mandatory field with name [userid]. see below.
FYI.. I can trigger my BPM process through the Web Service in wsnavigator , the error I am getting is while executing the BPM Process from the custom webdynpro.
Any idea how to resolve the issue?
XML Serialization Error. GenericObject [
<modelObject class="com.sap.demo.wdpoc.wd.models.model.NewOperation"><attribute name="In" value="KK"/><attribute name="Name" value="133"/><attribute name="Age" value="dad"/><attribute name="Designation" value="12124"/><attribute name="Userid" value="null"/></modelObject>
] does not have a mandatory field with name [userid].
[EXCEPTION]
com.sap.engine.services.webservices.jaxrpc.exceptions.XmlMarshalException: XML Serialization Error. GenericObject [
<modelObject class="com.sap.demo.wdpoc.wd.models.model.NewOperation"><attribute name="In" value="KK"/><attribute name="Name" value="133"/><attribute name="Age" value="dad"/><attribute name="Designation" value="12124"/><attribute name="Userid" value="null"/></modelObject>
] does not have a mandatory field with name [userid].
at com.sap.engine.services.webservices.jaxrpc.encoding.SerializationUtil.serializeGenericFieldContent(SerializationUtil.java:1546)
at com.sap.engine.services.webservices.jaxrpc.encoding.SerializationUtil.serializeGenericFields(SerializationUtil.java:1431)
at com.sap.engine.services.webservices.jaxrpc.encoding.SerializationUtil.serializeGenericType(SerializationUtil.java:1383)
at com.sap.engine.services.webservices.jaxrpc.encoding.GeneratedComplexType.serialize(GeneratedComplexType.java:168)
at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.serializeParameter(SOAPTransportBinding.java:1731)
at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.serializeRequest(SOAPTransportBinding.java:1683)
at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.writeSOAPRequestMessage(SOAPTransportBinding.java:254)
at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.call_SOAP(SOAPTransportBinding.java:1272)
at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.callWOLogging(SOAPTransportBinding.java:952)
at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.call(SOAPTransportBinding.java:907)
at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DInterfaceInvokerImpl.invokeOperation(DInterfaceInvokerImpl.java:76)
at com.sap.tc.webdynpro.model.webservice.model.WSGenericModelClassExecutable.execute(WSGenericModelClassExecutable.java:73)
at com.sap.tc.webdynpro.model.webservice.gci.WSTypedModelClassExecutable.execute(WSTypedModelClassExecutable.java:49)
at com.sap.demo.wdpoc.wd.comp.wdpoc.Wdpoc.execute(Wdpoc.java:257)

This question is not answered but I am marking it answered because I have to post more.
Sorry
-Ashwani

"500 internal server error" after adding custom fields to Address page

I need to display custom fields on the "Addresses" and the "Personal Data" pages. For that, we added custom CI_INCLUDE fields in both PA0006 and PA0002 tables as per instructions below
https://www.sdn.sap.com/irj/scn/wiki?path=/display/profile/essPersonalInformationUIenhancementwithoutmodification&focusedCommentId=28278867
we also extended the Badi HRPAD00INFTYUI
custom fields show up OK in page "Personal Data". However when trying to browse to page "Addresses"
we get the following error:
"500 internal server error - com.sap.tc.webdynpro.progmodel.context.ContextException: MappedNodeInfo(DetailView.SelectedInfotype): unknown child node Area8 ".
"Area8" is one of the custom fields we added in PA0006 (Address infotype).
any idea what is wrong? maybe Badi HRPAD00INFTYUI cannot handle 2 infotypes in the same time?
T.

Hi Sasu,
Its clearly saying contect binding error. Have you mapped correctly from FcComponent to VcComponents.
FcCompoenets for Model logic.
Check the mappings correctly.
If it is complete custom or new field then there will be could of steps.
1) Reimport the model
2) map new field to FcComponent
3) Bind new Fields from Fc to Vc
Rgds
-SS

Error after adding attribute

hi i have added attribute in my EmpDetails data control but now when i run the application i get the error Definition LastName of type Attributes is not in EmpDetails1

where is the classes folder and where is some file system tool can you be in details please
my log is*** Using HTTP port 7101 ***
*** Using SSL port 7102 ***
"C:\Documents and Settings\Desmond\Application Data\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\bin\startWebLogic.cmd"
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C:\oracle\MIDDLE~1\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\oracle\MIDDLE~1\patch_jdev1112\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar
PATH=C:\oracle\MIDDLE~1\patch_wls1035\profiles\default\native;C:\oracle\MIDDLE~1\patch_jdev1112\profiles\default\native;C:\oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\oracle\MIDDLE~1\JDK160~1\jre\bin;C:\oracle\MIDDLE~1\JDK160~1\bin;C:\forms;C:\product\11.2.0\dbhome_1\bin;C:\product\11.2.0\dbhome_1;C:\DevSuiteHome_1\BIN;C:\DevSuiteHome_1\jlib;C:\Program Files\PHP;C:\Program Files\PC Connectivity Solution\;C:\windows\system32;C:\windows;C:\windows\System32\Wbem;C:\Program Files\Common Files\Roxio Shared\DLLShared;C:\Program Files\Common Files\Roxio Shared\DLLShared;C:\Program Files\Common Files\Roxio Shared\9.0\DLLShared;C:\Program Files\Common Files\DivX Shared;c:\Program Files\Java\jdk1.6.0_21\bin;C:\product\11.2.0\dbhome_1\BIN;C:\DevSuiteHome_1;C:\Program Files\Common Files\Roxio Shared\10.0\DLLShared;C:\Program Files\Common Files\Roxio Shared\DLLShared;C:\Program Files\Common Files\Roxio Shared\10.0\DLLShared;C:\mywls;C:\mydomain\base_domain\bin;C:\Program Files\Java\jre6\bin\client;C:\Program Files\Java\jre6\bin;C:\Program Files\Java\jdk1.6.0_21\jre\bin;C:\Program Files\Java\jdk1.6.0_21\bin;C:\Program Files\Java\jdk1.6.0_21;C:\Program Files\Java\jre6;C:\DevSuiteHome_1\forms;C:\DevSuiteHome_1\cgenf61\admin;C:\DevSuiteHome_1\forms;C:\forms\sms_code.pll;C:\mywls\wlserver\bin;C:\Java\jdk1.6.0_21;C:\oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_24"
Java(TM) SE Runtime Environment (build 1.6.0_24-b50)
Java HotSpot(TM) Client VM (build 19.1-b02, mixed mode)
Starting WLS with line:
C:\oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\DOCUME~1\Desmond\LOCALS~1\Temp\trustStore5345414217410371315.jks -Doracle.jdeveloper.adrs=true -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=C:\oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\oracle\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=C:\oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=C:\DOCUME~1\Desmond\APPLIC~1\JDEVEL~1\SYSTEM~1.81\DEFAUL~1 -Djrockit.optfile=C:\oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=C:\DOCUME~1\Desmond\APPLIC~1\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.domain.config.dir=C:\DOCUME~1\Desmond\APPLIC~1\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\DOCUME~1\Desmond\APPLIC~1\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\DOCUME~1\Desmond\APPLIC~1\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:\DOCUME~1\Desmond\APPLIC~1\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\DOCUME~1\Desmond\APPLIC~1\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\servers\DefaultServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=C:\oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\DOCUME~1\Desmond\APPLIC~1\JDEVEL~1\SYSTEM~1.81\DEFAUL~1\oracle\store\gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\oracle\MIDDLE~1\patch_wls1035\profiles\default\sysext_manifest_classpath;C:\oracle\MIDDLE~1\patch_jdev1112\profiles\default\sysext_manifest_classpath weblogic.Server
<11 Dec 2011 3:56:44 PM> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<11 Dec 2011 3:56:44 PM> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<11 Dec 2011 3:56:45 PM> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 19.1-b02 from Sun Microsystems Inc.>
<11 Dec 2011 3:56:45 PM> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 >
<11 Dec 2011 3:56:48 PM> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<11 Dec 2011 3:56:48 PM> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<11 Dec 2011 3:56:49 PM> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\Desmond\Application Data\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<11 Dec 2011 3:56:49 PM> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\Desmond\Application Data\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log00115. Log messages will continue to be logged in C:\Documents and Settings\Desmond\Application Data\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log.>
<11 Dec 2011 3:56:49 PM> <Notice> <Log Management> <BEA-170019> <The server log file C:\Documents and Settings\Desmond\Application Data\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
<11 Dec 2011 3:57:02 PM> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<11 Dec 2011 3:57:19 PM> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<11 Dec 2011 3:57:19 PM> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<MessageLocalizationHelper> <getLocalizedMessage> The resource for bundle "oracle.jrf.i18n.MBeanMessageBundle" with key "oracle.jrf.JRFServiceMBean.checkIfJRFAppliedOnMutipleTargets" cannot be found.
<11 Dec 2011 3:57:42 PM> <Notice> <LoggingService> <BEA-320400> <The log file C:\Documents and Settings\Desmond\Application Data\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<11 Dec 2011 3:57:42 PM> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Documents and Settings\Desmond\Application Data\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log00114. Log messages will continue to be logged in C:\Documents and Settings\Desmond\Application Data\JDeveloper\system11.1.2.1.38.60.81\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log.>
<11 Dec 2011 3:57:42 PM> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<11 Dec 2011 3:57:43 PM> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<11 Dec 2011 3:57:43 PM> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<11 Dec 2011 3:57:43 PM> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file C:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
<11 Dec 2011 3:57:44 PM> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks.>
<11 Dec 2011 3:57:44 PM> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file C:\oracle\MIDDLE~1\JDK160~1\jre\lib\security\cacerts.>
<11 Dec 2011 3:57:44 PM> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=Entrust Root Certification Authority - G2,OU=(c) 2009 Entrust\, Inc. - for authorized use only,OU=See www.entrust.net/legal-terms,O=Entrust\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<11 Dec 2011 3:57:44 PM> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<11 Dec 2011 3:57:44 PM> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<11 Dec 2011 3:57:44 PM> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<11 Dec 2011 3:57:44 PM> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<11 Dec 2011 3:57:44 PM> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<11 Dec 2011 3:57:44 PM> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<11 Dec 2011 3:57:44 PM> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<11 Dec 2011 3:57:44 PM> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
<11 Dec 2011 3:57:44 PM> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 127.0.0.1:7102 for protocols iiops, t3s, ldaps, https.>
<11 Dec 2011 3:57:44 PM> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<11 Dec 2011 3:57:44 PM> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<11 Dec 2011 3:57:45 PM> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<11 Dec 2011 3:57:45 PM> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
IntegratedWebLogicServer startup time: 64047 ms.
IntegratedWebLogicServer started.
[Running application HrSystem on Server Instance IntegratedWebLogicServer...]
[03:57:46 PM] **** Warning: Application HrSystem may have been left deployed on the server. Undeploy it from the admin console.
[03:57:48 PM] Web Module HrSystemWebApp.war recognized in project HrSystem.jpr
[03:57:48 PM] ---- Deployment started. ----
[03:57:48 PM] Target platform is (Weblogic 10.3).
[03:57:49 PM] Retrieving existing application information
[03:57:49 PM] Running dependency analysis...
[03:57:49 PM] Deploying 2 profiles...
[03:57:50 PM] Wrote Web Application Module to C:\Documents and Settings\Desmond\Application Data\JDeveloper\system11.1.2.1.38.60.81\o.j2ee\drs\HrSystem\HrSystemWebApp.war
[03:57:51 PM] Wrote Enterprise Application Module to C:\Documents and Settings\Desmond\Application Data\JDeveloper\system11.1.2.1.38.60.81\o.j2ee\drs\HrSystem
[03:57:51 PM] Deploying Application...
[03:58:39 PM] Application Deployed Successfully.
[03:58:39 PM] The following URL context root(s) were defined and can be used as a starting point to test your application:
[03:58:39 PM] http://127.0.0.1:7101/HrSystem-HrSystem-context-root
[03:58:39 PM] Elapsed time for deployment: 51 seconds
[03:58:39 PM] ---- Deployment finished. ----
Run startup time: 51047 ms.
[Application HrSystem deployed to Server Instance IntegratedWebLogicServer]
Target URL -- http://127.0.0.1:7101/HrSystem-HrSystem-context-root/faces/DeptEmpPage
<ViewHandlerImpl> <_checkTimestamp> Apache Trinidad is running with time-stamp checking enabled. This should not be used in a production environment. See the org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION property in WEB-INF/web.xml
<UIXEditableValue> <_isBeanValidationAvailable> A Bean Validation provider is not present, therefore bean validation is disabled
<LifecycleImpl> <_handleException> ADF_FACES-60098:Faces lifecycle receives unhandled exceptions in phase RENDER_RESPONSE 6
oracle.jbo.NoDefException: JBO-25058: Definition LastName of type Attribute is not found in EmpDetails1.
     at oracle.jbo.server.ViewObjectImpl.findAttributeDef(ViewObjectImpl.java:7322)
     at oracle.adf.model.bc4j.DCJboDataControl.getAttributeDefs(DCJboDataControl.java:2612)
     at oracle.adf.model.binding.DCIteratorBinding.getAttributeDefs(DCIteratorBinding.java:3321)
     at oracle.jbo.uicli.binding.JUCtrlValueBinding.fetchAttrDefs(JUCtrlValueBinding.java:514)
     at oracle.jbo.uicli.binding.JUCtrlValueBinding.getAttributeDefs(JUCtrlValueBinding.java:465)
     at oracle.jbo.uicli.binding.JUCtrlValueBinding.getAttributeCount(JUCtrlValueBinding.java:1475)
     at oracle.jbo.uicli.binding.JUCtrlAttrsBinding.updateValuesFromRow(JUCtrlAttrsBinding.java:134)
     at oracle.jbo.uicli.binding.JUCtrlValueBinding.updateNavigated(JUCtrlValueBinding.java:290)
     at oracle.jbo.uicli.binding.JUIteratorBinding.navigated(JUIteratorBinding.java:310)
     at oracle.jbo.common.RowSetHelper.fireNavigationEvent(RowSetHelper.java:264)
     at oracle.jbo.server.ViewRowSetIteratorImpl.notifyNavigationToRow(ViewRowSetIteratorImpl.java:3661)
     at oracle.jbo.server.ViewRowSetIteratorImpl.notifyNavigation(ViewRowSetIteratorImpl.java:3632)
     at oracle.jbo.server.ViewRowSetIteratorImpl.next(ViewRowSetIteratorImpl.java:1781)
     at oracle.jbo.server.ViewRowSetIteratorImpl.first(ViewRowSetIteratorImpl.java:1585)
     at oracle.jbo.server.ViewRowSetImpl.first(ViewRowSetImpl.java:3556)
     at oracle.jbo.server.ViewObjectImpl.first(ViewObjectImpl.java:10196)
     at oracle.adf.model.binding.DCIteratorBinding.setupRSIstate(DCIteratorBinding.java:808)
     at oracle.adf.model.binding.DCIteratorBinding.refreshControlAndNotifyDCE(DCIteratorBinding.java:707)
     at oracle.adf.model.binding.DCIteratorBinding.rangeRefreshed(DCIteratorBinding.java:914)
     at oracle.jbo.common.RowSetHelper.fireRangeRefreshed(RowSetHelper.java:175)
     at oracle.jbo.server.ViewRowSetIteratorImpl.notifyRangeRefreshed(ViewRowSetIteratorImpl.java:3596)
     at oracle.jbo.server.ViewRowSetIteratorImpl.ensureRefreshed(ViewRowSetIteratorImpl.java:2813)
     at oracle.jbo.server.ViewRowSetIteratorImpl.refresh(ViewRowSetIteratorImpl.java:3033)
     at oracle.jbo.server.ViewRowSetImpl.notifyRefresh(ViewRowSetImpl.java:2797)
     at oracle.jbo.server.ViewRowSetImpl.execute(ViewRowSetImpl.java:1255)
     at oracle.jbo.server.ViewRowSetImpl.executeEmptyRowSet(ViewRowSetImpl.java:1429)
     at oracle.jbo.server.ViewObjectImpl.executeEmptyRowSet(ViewObjectImpl.java:7129)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding$QueryModelImpl._handleAutoExec(FacesCtrlSearchBinding.java:1863)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding$QueryModelImpl._performOneTimeActions(FacesCtrlSearchBinding.java:1997)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding$QueryModelImpl.<init>(FacesCtrlSearchBinding.java:1479)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding.getQueryModel(FacesCtrlSearchBinding.java:334)
     at oracle.adfinternal.view.faces.model.binding.FacesCtrlSearchBinding.internalGet(FacesCtrlSearchBinding.java:3648)
     at oracle.adf.model.binding.DCExecutableBinding.get(DCExecutableBinding.java:115)
     at javax.el.MapELResolver.getValue(MapELResolver.java:164)
     at com.sun.faces.el.DemuxCompositeELResolver._getValue(DemuxCompositeELResolver.java:176)
     at com.sun.faces.el.DemuxCompositeELResolver.getValue(DemuxCompositeELResolver.java:203)
     at com.sun.el.parser.AstValue.getValue(Unknown Source)
     at com.sun.el.ValueExpressionImpl.getValue(Unknown Source)
     at org.apache.myfaces.trinidad.bean.FacesBeanImpl.getProperty(FacesBeanImpl.java:73)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.getProperty(UIXComponentBase.java:1485)
     at oracle.adf.view.rich.component.UIXQuery.getModel(UIXQuery.java:493)
     at oracle.adf.view.rich.component.UIXQuery._setupAndStoreContextInRequest(UIXQuery.java:301)
     at oracle.adf.view.rich.component.UIXQuery.encodeBegin(UIXQuery.java:222)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1650)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:624)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:3201)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:641)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelHeaderRenderer.renderChildrenAfterHelpAndInfo(PanelHeaderRenderer.java:637)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelHeaderRenderer._renderContentCell(PanelHeaderRenderer.java:1169)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelHeaderRenderer.renderContentRow(PanelHeaderRenderer.java:575)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelHeaderRenderer.encodeAll(PanelHeaderRenderer.java:248)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:923)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:624)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:3201)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer._encodeChild(PanelGroupLayoutRenderer.java:447)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer.access$1500(PanelGroupLayoutRenderer.java:30)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer$EncoderCallback.processComponent(PanelGroupLayoutRenderer.java:734)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer$EncoderCallback.processComponent(PanelGroupLayoutRenderer.java:637)
     at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:187)
     at org.apache.myfaces.trinidad.component.UIXComponent.processFlattenedChildren(UIXComponent.java:318)
     at org.apache.myfaces.trinidad.component.UIXComponent.encodeFlattenedChildren(UIXComponent.java:283)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelGroupLayoutRenderer.encodeAll(PanelGroupLayoutRenderer.java:360)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:923)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:624)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:3201)
     at oracle.adfinternal.view.faces.renderkit.rich.DecorativeBoxRenderer.encodeFacet(DecorativeBoxRenderer.java:440)
     at oracle.adfinternal.view.faces.renderkit.rich.DecorativeBoxRenderer._encodeCenterPane(DecorativeBoxRenderer.java:704)
     at oracle.adfinternal.view.faces.renderkit.rich.DecorativeBoxRenderer.encodeAll(DecorativeBoxRenderer.java:380)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:923)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:624)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:3201)
     at oracle.adfinternal.view.faces.renderkit.rich.DecorativeBoxRenderer.encodeFacet(DecorativeBoxRenderer.java:440)
     at oracle.adfinternal.view.faces.renderkit.rich.DecorativeBoxRenderer._encodeCenterPane(DecorativeBoxRenderer.java:704)
     at oracle.adfinternal.view.faces.renderkit.rich.DecorativeBoxRenderer.encodeAll(DecorativeBoxRenderer.java:380)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:923)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:624)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:3201)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer.encodeCenterFacet(PanelStretchLayoutRenderer.java:879)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer._encodeCenterPane(PanelStretchLayoutRenderer.java:1294)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer._encodeMiddlePanes(PanelStretchLayoutRenderer.java:351)
     at oracle.adfinternal.view.faces.renderkit.rich.PanelStretchLayoutRenderer.encodeAll(PanelStretchLayoutRenderer.java:316)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:923)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:624)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:3201)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:641)
     at oracle.adf.view.rich.render.RichRenderer.encodeAllChildrenInContext(RichRenderer.java:3062)
     at oracle.adfinternal.view.faces.renderkit.rich.FormRenderer.encodeAll(FormRenderer.java:274)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:923)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeChild(CoreRenderer.java:624)
     at oracle.adf.view.rich.render.RichRenderer.encodeChild(RichRenderer.java:3201)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeAllChildren(CoreRenderer.java:641)
     at oracle.adf.view.rich.render.RichRenderer.encodeAllChildrenInContext(RichRenderer.java:3062)
     at oracle.adfinternal.view.faces.renderkit.rich.DocumentRenderer.encodeAll(DocumentRenderer.java:1277)
     at oracle.adf.view.rich.render.RichRenderer.encodeAll(RichRenderer.java:1452)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:511)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:923)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1659)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:1655)
     at oracle.adfinternal.view.faces.component.AdfViewRoot.encodeAll(AdfViewRoot.java:91)
     at com.sun.faces.application.view.JspViewHandlingStrategy.doRenderView(JspViewHandlingStrategy.java:431)
     at com.sun.faces.application.view.JspViewHandlingStrategy.renderView(JspViewHandlingStrategy.java:233)
     at org.apache.myfaces.trinidadinternal.application.ViewDeclarationLanguageFactoryImpl$ChangeApplyingVDLWrapper.renderView(ViewDeclarationLanguageFactoryImpl.java:350)
     at com.sun.faces.application.view.MultiViewHandler.renderView(MultiViewHandler.java:131)
     at javax.faces.application.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:273)
     at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:165)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._renderResponse(LifecycleImpl.java:1027)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:334)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:232)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:313)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:173)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:122)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:468)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:293)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:199)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:180)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)

I/O error after adding Java 1.5 to CBS

Hi,
I have some trouble with building my old projects on the CBS when I try to configure the CBS so that it can build java 1.5 applications. The guide I did use to configure the CBS was the "Setup_an_NWDI_Track_for_Composition_Environment_Developments.pdf".
There were only two things to do to change the CBS service:
I changed the following things in the Visual Administrator:
the 'BUILD_TOOL_JDK_HOME' from C:\j2sdk1.4.2_14-x64 to 'C:\jdk1.5.0_17-x64'
the 'JDK_HOME_PATH' from 'JDK1.3.1_HOME=C:\j2sdk1.4.2_14-x64;'
to 'JDK1.3.1_HOME=C:\j2sdk1.4.2_14-x64;default=C:\j2sdk1.4.2_14-x64;JDK1.5.0_HOME=C:\jdk1.5.0_17-x64'
after that I get the following error message when I try to build an old project:
Change request state from PROCESSING to FAILED
Error! The following problem(s) occurred during request processing:
Error! The following error occurred during request processing:An I/O error occurred on attempt to start an external process to perform the build. The arguments used the start the process are as follows:
Maybe someone had the same experience?
regards
Carsten

Here is the procedure that I have how this should be done. make sure you keep up to the prerequisites for NWDI on 7.0 minimum sp13, and updated SLD with last possible content.
During development, you can decide that you want your track to be reserved for concrete types of development. For example, if you know that your application is used only for pure Java development, you can create a track that supports only Java development. Then you can exclude all the other standard software components (SCs) provided by default in a standard track. This allows you to have a simpler development landscape. You do this track setup inside the SAP NetWeaver Administratoru2019s Configuration Wizard.
Setting Up a Track for Composition Development in SAP NetWeaver 7.0 System
Instead of using a track from your SAP NetWeaver 7.1 CE development infrastructure, you can connect your SAP NetWeaver CE to an existing installation of SAP NetWeaver 7.0 with its own SAP NetWeaver Development Infrastructure (NWDI) and use this already set up infrastructure. The configuration template allows you to connect to an existing SAP NetWeaver 7.0 system, and directly configures the track in the Change Management Service (CMS) for the type of development you want. The available track configurations in this case are marked with <type of development> 7.0in the wizard (for example CAF Application for 7.0).
General Prerequisites
You must have permissions in the Change Management Service (CMS) of the SAP NetWeaver Development Infrastructure (NWDI) to create and maintain tracks.
You have a valid location that contain the required Software Component Archive (SCA) files for your desired type of development.
You work in the SAP NetWeaver Administrator.
Prerequisites for Setting Up a Track for Composition Development in SAP NetWeaver 7.0 System
You have to:
SAP NetWeaver 7.0 you plan to use must have minimum SP level SP13. SAP NetWeaver Composition Environment requires JDK 1.5 or higher version while usage type NWDI of SAP NetWeaver 7.0 requires JDK 1.4. Make sure you have both JDK versions installed in your system."
Update the CIM in the SLD so that current versions of the dependent software component (SC) definitions are available. The CR content of the SLD of the SAP NetWeaver 7.0 must be up-to-date.
Note that the CR Content is independent from the SLD release. Therefore, you must always import the latest CR Content into each SLD. For more information about how to update the CR content, see SAP Note 669669.
Create a product and SC meant to be developed and define the SC dependencies within the SLD.
Enable the Component Build Service (CBS) to use a Java 5 SDK to compile the Java source files.
Create a track for CE development within the Change Management Service (CMS).
Configure the track to trigger CBS to use the Java 5 SDK (in the tracks XML configuration file).
Procedure
Log on to the SAP NetWeaver Administrator of the CE. Open Confighuration Management Scenarios tab page and choose Configuration Wizard.
Under the Configuration Tasks list, select the Change Management Service (CMS): Create an Application Skeleton task.
Choose Start and follow the steps of the wizard.
In the Software Component step, you can specify a concrete type of development that you want to be performed inside the track. You can choose between:
J2EE Application for NetWeaver 7.0
J2EE Application for NetWeaver 7.1
Web Dynpro Application for NetWeaver 7.0
Web Dynpro Application for NetWeaver 7.1
Portal Application for NetWeaver 7.0
CAF Application for 7.0
Composite Application 7.1
Composite Application 7.1 (with Composite Voice)
Composite Application 7.1 (with Guided Procedures)
Composite Application 7.1 (with Business Process Management)
Business Process Management Application for NetWeaver 7.1
Sandbox 7.0
Sandbox 7.1
Set the Enhancement Package number.
To reflect the Enhancement Package strategy of SAP in the configuration of track templates it was necessary to introduce an additional input parameter. During the configuration of a software component you need to specify certain required relations for build time so that the central build environment can do its work. The central build environment (CBS) is depending on the release of the build archives that are imported into the build environment. Therefore it is necessary to add this release information to the required software components of a track. Since the release number is derived from the Enhancement Package of the major release, the input in the Enhancement Package field adds this variable information. Thus leaving the default 0 in the enhancement package field will result in a required software component release 7.10, while an entry of 1 will result in release 7.11.
Complete the wizard.
For more information about the dependant SCs used for each type of development, see SAP Note1080927 .

Error after adding lightbox

Hi - I'm looking for a bit of help with a site i'm building in Adobe Muse. It's been baffling me for a few days and I can seem to find an answer at all on the internet.
The site was working fine a few days ago - it is a one page site with 5 anchor points instead of pages and also had a fixed position header with the nav bar inside.
I believe the error started after inserting a lightbox on the page - as taking out this lighbox makes the site run smoothly again. The lighbox consistes of 15 thumbnails each with a presentation box inside.
the problem is this: the page appears to open up fine with everything positioned centrally (although there is a scroll bar at the bottom which wasn't there before). However as soon as I press one of the navigation buttons that are attahed to the fixed header - all of the content slides to the left of the screen where it stays when naviagating through the anchor points.
It's almost as though an object is pushing it all to the left - although i have checked and there is nothing invisible causing this. It also seems to cause my header and footer - which are both fixed - to become detached. Like something is forcing the page to become so much wider that it is.
I'm hoping there is a simple solution to this and would apprecite any help.
Thanks

This image above is how the site should look and the content is positioned here when the page is opened - the image below is what happens once i start to navigate the site.

Usertable error after adding a udf

Similar Messages

Maybe you are looking for