Using 2 different JREs on the same application

I have my java application which must use JRE java1.5. It is mandatory.
However, for just one fonctionnality, I want to use JRE java1.6 which have a bug fixed on a given class method.
Is there a way to use both JREs one same application?
Can I indicate that, for calling the corrected method, I want to use JRE 1.6 instead of the default JRE of the project (Java 1.5)?
Thanks
Regards

I want to use JRE java1.6 which have a bug fixed on a given class method.The API is open source dude... you do the math.
No responsibility will be accepted for bad advice rendered, regardless of any warranty, including that implicit in the implication that I have a clue, or indeed give a s__t.

Similar Messages

  • APs using different channels for the same SSID

    Hi,
    This might be a stupid question, but I am wondering why my Aironet 1602i and 2602i access points connected to the same controller would use different channels for the same network. Would this be to avoid interference? If so, I am planning to put 9 access points throughout the office and they will be fairly close to each other. Would this increase the risk of interference?
    Thanks,
    Tibet

    That is normal. The WLC is determining the best channel and being in different channels is the best. When you add more, the WLC will decide by the use if RRM what channels and power levels to allocate to each AP.
    Sent from Cisco Technical Support iPhone App

  • How can I make different windows of the same application I have open remain on their respective desktops/spaces after reboot?

    Hi all,
    I use the same applications for work, entertainment and other personal activities, so it's impossible to simply assign different apps to different desktops/spaces. Thus, I have open windows of the same programs (Pages, TextEdit, Preview) arranged on several desktops. If I reboot my laptop, the windows are just crammed on Desktop 1. Can something be done about it?

    Barney,
    many thanks for your efforts and your time (preparing and posting the screenshot, answering to this question,...).
    Unfortunately, moving the focus to the next window only works with windows on the same desktop.
    btw, using a german keyboard layout and german language settings the shortcut is "cmd+<".
    I can switch with this shortcut between different windows of my Safari which reside on the same desktop, but I cannot swith between different safari windows distributed over several desktops.
    Thanks,
    equi    

  • OC4Js on different servers sharing the same application

    Does anyone have some suggestions to how I can get non-clustered mid-tier OC4Js to share the same application stored on a shared NFS mount?
    Right now, what I've done is created the OCJ4_Dev1 on mid1 and OC4J_Dev2 on mid2, then changed their server properties for application and application deployments to point to the shared NFS, but different directories.
    Is there some way they can use the same directory? I can think of a number of ways of doing this with links etc, but maybe has some better ideas? Basically, I want the same "source" for two different OC4Js, but without confusing the instance configurations.

    I think there are many options around this, but a simple way I managed it was to have 2 windows accounts,and each with a different iTunes library. I think you can now share multiple libraries on the one account, I'm sure there's an answer in the support pages here.

  • How can i deploy two different versions of the same application on the same server??

    I have two different versions of an application. One is a released version. And another version under development. I need to port this version of the application to the same server. I'm using the same classes and packages(except for some new ones). Is it sufficient if i change the name of my ear(application name). Or should i change my code also.

    Hi
    You can repackage the new versions of ear,jar and war with different names. I hope that should work well.
    Cheers
    -pradeep

  • Running different JRE on the same system to measure JRE Performance

    Hey there,
    I want to run several java benchmarks on different runtime environments on the same system.
    Now, I need to know what I have to consider that those machines do not affect each other?
    What do I need to consider while installing those different runtime environments.
    How do I have to set the classpath, etc. - I guess it shouldn't be set...
    Are there any files in the operating system that could affect the different JRE versions, such as java.exe and javaw.exe in the Windows NT System directory? What do I have to do with those files?
    And which would be the proper steps to reach a meaningful result?!
    Right now I am using Windows NT, but I will also try to run some tests on Linux! So, I am open for any kind of help!
    Thanks,
    Marc

    Hi Marc,
    Have you considered installing one JRE at a time and running your benchmarks? Before installing the next JRE, uninstall
    the existing JRE. Thus eliminating any possibility of
    overwriting/corrupting any of the Windows NT System
    directories or registry settings.
    -Sun DTS

  • How can I use different presets on the same instrument?

    I use Session Horns Pro with Kontakt Played in Mainstage 3.
    You can choose different presets within Session Horns without having to load additional samples and take up more memory.
    How can I create different patches that use the changes of Session Horn Patches without duplicating the samples in Kontakt?
    If I copy the channel strip and 'Paste as alias" changes made to one copy are the same as the alias. It seems there must be a way to "Automate" controls in an alias that is unique to each patch. I could also use to do this on instruments like Vintage Clav and Vintage B3 where I don't want to create duplicate instances of CPU hungry plug ins just to use different presets in different patches.
    Thanks in advance to anyone out there who knows of a workaround!
    Larry Ketchell

    Yes.  You can sync apps/music/etc to as many of your iphones/ipads/ipods as you like.
    Here is how to use the iphone without a wireless plan:
    Using an iPhone without a wireless service plan

  • Different CONFIG in the same application

    Hi,
    I am quite new on Forms World and I am having some problems on using the
    Forms configuration below listed. Can anyone help me on this issue?
    I have:
    * http://mydomain.com/forms/frmservlet?config=application1
    This address open my application without any problems!
    * http://mydomain.com/forms/frmservlet?config=application2
    This address also open my application without any problems!
    But, I need, from the first application string (http://mydomain.com/forms/frmservlet?config=application1), to call one particular FORM using the config=application2 .
    How can I do that?
    Thanks a lot,
    Paulo.

    I don't believe there is a native way to do this in Forms.
    Please correct me if I am wrong but I think:
    You can use the web.show_document method but this would not be the same as using call_form or any of the other built-ins. As long as you don't need access to any :global's created by the calling form inside the called form and vice versa you should be ok. This will also require you to login a second time if the username isn't specified in the 2nd config unless you have programmed the form to not require a database connection or it connects on it's own.

  • Using different levels of the same dimension

    If I have 2 fact tables and a conforming time dimension. Can I make a join so that one table will ignore different years completely? (1 table has only 1 year of data, so it should display same values for different years for other table -yet, I still want to be able to drill-down from Year-to-Detail). I am somewhat successful at seeing it ok on a Annual level (when setting the desired metric to Grand Total Level - but aggregate navigation doesn't work correctly -I'm locked at annual level). Thanks

    HI mma (and anyone else who was following).
    Here's an update:
    a) AGO function doesn't support anything non-integer - it's official and the product enhancement request has been filled. Go figure - they cancel time-series wizard - but at the same time - the AGO isn't fully scalable. Since we're developing a brand-new RPD - and we weren't using any YAGO, MAGO, etc. tables - this has bitten us later than sooner.
    b) using CASE statement is no panacea (change for each year).
    c) your method (time.key=time.key (of 2005) + MOD (time,key, 365) would probably work in my situation (I tried it - and it wasn't that difficult to implement), UNLESS I'd get the following RPD integrity error - "Error: Using a complex join in table that sources time dimension" (I tried aliases as well).
    d) Right now, I'm just doing that metric on Annual level. Creating a view in Oracle that only contains needed data (for 2006) , using it as a physical table in physical layer, and connecting with all foreign keys BUT time.
    I still think there must be a better way without complex ETL and without creating additional column. LOJ and ROJ and FOJ didn't work.
    Thanks for looking at this again.

  • Can I Use Different Programs at the Same Time

    Hi All,
    I understand that the Creative Cloud can be installed on two computers but the same programe cant be running on both at the same time. I use my MacBook and iMac in unison so my question is could one computer be running Illusstrator and the other running Photoshop without any issues at the same time?
    Thanks
    Sam

    Hi Sam
    The Creative Cloud apps can be installed on 2 computers and used at the same time by the individual associated with the membership.
    Thanks
    Bev

  • How can I change between different JRE in the Same PC

    I have two systems.A system can only run in JRE 1.3 and B system can only run in JRE 1.5 enviroment.But I have to run both in one desktop(which use WinXP SP2),how can I do it . I tried to edit the system config using the cmd of regedit , edited some like these.But it did not work .Could anybody tell me how to do? Thanks a lot in advantage.
    [HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{08B0E5C0-4FCB-11CF-AAA5-00401C608501}\TreatAs]
    [HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{8AD9C840-044E-11D1-B3E9-00805F499D93}]
    [HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\{8AD9C840-044E-11D1-B3E9-00805F499D93}\InprocServer32]
    [HKEY_LOCAL_MACHINE\SOFTWARE\Classes\JavaPlugin\CLSID]
    [HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Development Kit]CurrentVersion="1.X"
    [HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Runtime Environment] CurrentVersion="1.X"
    The information of operation system is omitted.
    Message was edited by:
    daiwill
    Operation System is WinXP SP2
    Message was edited by:
    daiwill

    I found some clues last week in these linkes.
    http://forum.java.sun.com/thread.jspa?threadID=657406&tstart=150
    http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/jcp.html#java
    Which has the contents like the below:
    Example:
    Assume you are running on Microsoft Windows with Microsoft Internet Explorer, have first installed version 1.4.2, then version 5.0, and you want to run 1.4.2.
    Go to the j2re1.4.2\bin directory where JRE 1.4.2 was installed. On a Windows default installation, this would be here: C:\Program Files\Java\j2re1.4.2\bin
    Double-click the jpicpl32.exe file located there. It will launch the control panel for 1.4.2.
    Select the Browser tab. Microsoft Internet Explorer might still appear to be set (checked). However, when 5.0 was installed, the registration of the 1.4.2 JRE with Internet Explorer was overwritten by the 5.0 JRE.
    If Microsoft Internet Explorer is shown as checked, uncheck it and click Apply. You will see a confirmation dialog stating that browser settings have changed.
    Check Microsoft Internet Explorer and click Apply. You should see a confirmation dialog.
    Restart the browser. It should now use the 1.4.2 JRE for conventional APPLET tags.
    I tried the method of change the control panel but they did not work either.
    Any other helps?
    Thanks in advantage.
    Message was edited by:
    daiwill

  • Using multiple PersistenseFactories in the same application

    Hi,
    A silly question. If I have multiple PersistenseFactories (completely
    different ones with their own cPCs) in my application. E.g. several JDO
    components developed independently and brought together into a single app.
    They connect to different databases etc. but it is not the point here. The
    question is how do I make sure factory A will not attempt to load and manage
    classes which are meant to be managed by factory B
    As far as I know there is no explicit instructions for factory which classes
    it should manage - so whatever I ask from its PM it'll try to give me even
    if it should not. How about PCs and OIDs registration any problems here?
    May be I am missing something, I would appreciate your comments
    Alex

    Additionally, if you manually set the persistent class list (with the
    com.solarmetric.kodo.PersistentTypes property), then we will not attempt
    to load type information from the data store. So, this will likely come
    close to doing what you want.
    Alternately, you could extend our PM to check in various methods
    (getObjectById, makePersistentFilter come to mind) that the arguments
    passed in are of the expected types.
    -Patrick
    On Wed, 02 Jul 2003 17:49:02 -0400, Alex Roytman wrote:
    Hi,
    A silly question. If I have multiple PersistenseFactories (completely
    different ones with their own cPCs) in my application. E.g. several JDO
    components developed independently and brought together into a single app.
    They connect to different databases etc. but it is not the point here. The
    question is how do I make sure factory A will not attempt to load and manage
    classes which are meant to be managed by factory B
    As far as I know there is no explicit instructions for factory which classes
    it should manage - so whatever I ask from its PM it'll try to give me even
    if it should not. How about PCs and OIDs registration any problems here?
    May be I am missing something, I would appreciate your comments
    Alex--
    Patrick Linskey
    SolarMetric Inc.

  • Is it possible to export 2 PDFs (using different settings) at the same time from InDesign?

    As above. The purpose being to end up with one high res (print) pdf, and one low res (online) pdf.

    Cheers pal.
    I'm currently using a 'batch process' in Acrobat Pro on all my Print PDFs (to convert to online PDFs). Guess I'll stick with that then.
    Was hoping there would be something magic I could do when making the original PDFs from InDesign.

  • [svn] 4290: Bug: BLZ-288 - Consumer is only receiving first pushed message when Consumer and RemoteObject that is used to push the messages use different channel sets but same channel .

    Revision: 4290
    Author: [email protected]
    Date: 2008-12-11 14:24:37 -0800 (Thu, 11 Dec 2008)
    Log Message:
    Bug: BLZ-288 - Consumer is only receiving first pushed message when Consumer and RemoteObject that is used to push the messages use different channel sets but same channel.
    QA: Yes
    Doc: No
    Checkintests Pass: Yes
    Details:
    * The bug app was arguably generating bogus test data (messages with duplicate ids), and 99.9% of applications won't be configured this way (using multiple ChannelSets with overlapping Channels, pointing at the same server) but it's still worth making this work just right anyways.
    Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-288
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/ConsumerMessageDispatcher.as

    Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them.  This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

  • TS1702 Already purchase applications through apple ID is not showing in apps store purchase history of apps and If I try to download the same application in apps store  its showing paid application in apps store with using same apple ID account. Please re

    Already purchase applications through apple ID is not showing in apps store purchase history of apps and If I try to download the same application in apps store  its showing paid application in apps store with using same apple ID account.

    Thanks King_Penguin for taking time to read and reply. 
    I just purchased this movie on Thursday, May 15, so just a few days ago.  I have never had any trouble whatsoever since I have been in Vietnam.  I have downloaded several movies and even music and they have all synced to my respected Apple products except for this purchase. 
    Sorry, I don't quite understand what you mean by studios and different versions.  Could you please explain? 
    I checked my purchased list in my purchase history under my account and there are no hidden items. 

Maybe you are looking for