Using a non-firewire cam with quicktime broadcaster
I have this very nice ptz analogue video conferencing camera... worth about $2000 to tell the truth. I would love to be able to use it with quicktime broadcaster. The problem is the video output is S-video, not fire wire. Does anyone know of some sort of hardware adapter or something that can take the S-video signal and output it in such a way that will trick quicktime broadcaster into thinking that there is a firewire video cam connected?
any suggestions would be appreciated
G4 Dual Mac OS X (10.4.5)
I had thought of that but I am worried that i would shell out the money for one only to find out that Broadcaster doesn't recognize it. The documentation for Broadcaster claims that it requires a firewire camera. I am wondering if anyone has had any success or failure with this?
Not a QT Broadcaster user myself, but do have v1.5 installed on my G5. On reading your query, I tested it with an old, original (unstable stabilized) Dazzle Hollywood DV-Bridge and newer Canopus ADVC-300 converters. Both were correctly identified by name if properly connected when QT Broadcaster application is opened. And, although "hot-swapping" the converters did not cause any problems while QT Broadcaster is running, neither did it force the software to rescan and identify the "change" in hardware device.
For the purpose of the tests Nikon digital still cameras (990 and D-70) with analog video output and a Sony camcorder with analog and digital outputs (in both tape and throughput modes) were used as the source and the output was recorded/saved as a QT movie file by QT Broadcaster. While I could only get the D-70 to output singleframes (didn't take the time to look for the book), all other sources produced much better quality than expected using the default DV to QVGA/15fps settings -- even when using an old 1930's B&W movie as the taped source.
For what it's worth ...
Similar Messages
-
Using Echo AudioFire4 with Quicktime Broadcaster
Just purchased an Echo AudioFire4 to use as the input source for Quicktime Broadcaster on my Mac mini server.
The AudioFire4 shows up just fine in the audio source drop down and if I use either of the front panel inputs, which are inputs 1 & 2 it works.
However if I connect the source to either input 3 or 4 on the back panel it get nothing in Broadcaster. The audio shows up just fine in the AudioFire Console application. From trying the AudioFire4 with other audio applications its pretty clear that the applicaiton needs to have a place where you can choose inputs 3 &4 before you can get the audio from these inputs. So either QT Broadcaster has a place to do this I don't know about or I'm out of luck and can't use inputs 3 &4. Does anybody know of a way to make inputs 3 & 4 work with QT Broadcaster?
Thanks
AlanI had thought of that but I am worried that i would shell out the money for one only to find out that Broadcaster doesn't recognize it. The documentation for Broadcaster claims that it requires a firewire camera. I am wondering if anyone has had any success or failure with this?
Not a QT Broadcaster user myself, but do have v1.5 installed on my G5. On reading your query, I tested it with an old, original (unstable stabilized) Dazzle Hollywood DV-Bridge and newer Canopus ADVC-300 converters. Both were correctly identified by name if properly connected when QT Broadcaster application is opened. And, although "hot-swapping" the converters did not cause any problems while QT Broadcaster is running, neither did it force the software to rescan and identify the "change" in hardware device.
For the purpose of the tests Nikon digital still cameras (990 and D-70) with analog video output and a Sony camcorder with analog and digital outputs (in both tape and throughput modes) were used as the source and the output was recorded/saved as a QT movie file by QT Broadcaster. While I could only get the D-70 to output singleframes (didn't take the time to look for the book), all other sources produced much better quality than expected using the default DV to QVGA/15fps settings -- even when using an old 1930's B&W movie as the taped source.
For what it's worth ... -
ISight with QuickTime Broadcaster or QuickTime Streaming Server
Could some one tell me if it is possible to use iSight with QuickTime Broadcaster or QuickTime Streaming Server
Thank you
G4 DP Mac OS X (10.4.5)Yup. It is. Those, and other apps that will work with iSight, are linked in Some Applications You Can Use With iSight.
See the Apple links and tutorials for specifics on the uses of these powerful applications.
For a quick "how-to" on capturing video on your Mac using QT Broadcaster, scroll down to the Capturing Video with QuickTime Broadcaster section of this article on Making Movies with the Apple iSight .
If you want professional level details, see the relevant sections of the QuickTime Developer Connection.
Jim -
my iphone 4 wont connect to my laptop (windows 8) via usb but it will however register that it is there via 'photos' im not using the cable that came with my phone, does that affect the connection?
i just want it to connect to my itunes again!!!
Thank you to anyone and everyone that manages to help!Hello webster995,
Thank you for the details of the issue you are experiencing with your iPhone not appearing in iTunes. I recommend following the steps in the article below to troubleshoot the issue you described:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Can i use a non-apple keyboard with my imac?
can i use a non-apple keyboard with my imac?
Welcome to the Apple Support Communities
You can use the keyboard you want with your iMac. However, note that some keys, as the Command key, aren't present in non-Apple keyboards. For example, in a non-Apple keyboard, you have to press the Windows key because that's the replacement of the Command key of an Apple keyboard -
I''m using a Kodak M532 camera with a 2 gigabyte SD card. I recently took 30 photos, all of which are visible on the camera's screen. When I attempted to import them the last 15 were said to be in an unreadable format (no. 1117 on). I deleted some 200 photos from the card, but photos that I then took, though also visible on the camera's screen, were also said to be in an unreadable format. Is there a fix?
There is an ongoing issue with Kodak cameras and 10.6. Workaround: Reformat the card with the camera and use a USB Card Reader.
Regards
TD -
Hi just bought an iphone 4 today tried to activate the phone and it won't let me..I go through language ect and it says activateing iphone may take a few mins then just stops and message on screen says that the sim carrier is not supported and please use the sim which came with the phone(which i am..& have tried another sim and still not working)........It wont let me bypass have tried reseting phone and restarting it nothing helps????
Your iPhone is locked to the original carrier who sold it
Only they can unlock it
The sim the iPhone refers to is the one the iPhone is locked to
You will have to contact them -
Can anyone please help me. I have had my ipad2 for about 5 months and it has worked fine. I am now having issues charging it. I am using the cords that came with it and the outlet that I have used to charge it in the past, but when plugged in it is recconoigzed, but states not charging. I have made sure all my updates are current and they are. Does anyone have any suggestions or helful advice that my help. Thanks in advance.
Are you plugging it into a pc? If so it will not charge the iPad as there is not enough power try the back USB ports, may work.
If it isn't plugged into a pc and plugged into your socket could be faulty socket adapter. -
Can I use built-in iSight camera with other apps?
Can I use built-in iSight camera with other apps?
How?
doesn't work in imovie or image captureHi Judson,
THe built in iSight will actually work with iMovie if you have the version of iMovie which comes with iLife 6. (see http://docs.info.apple.com/article.html?artnum=61929 for a mention)
There is a slightly clumsy "workaround" available for use with earlier versions of iMovie, but you need a dv cam to use it - see http://www.macosxhints.com/article.php?story=20051217210335199
I gather that "EvoCam" - http://www.evological.com/evocam.html - will also work directly with the built in iSight.
So too, should recent versions of QuicktimePro.
As for other apps, tell us what you wish to do with it. We may be able to come up with some suggestions.
Cheers
Rod -
Error "printhead problem please use setup cartidge that came with the printer"
Hi, I have purchased a HP Deskjet 5525 All in one printer, it was working perfectly till 1 year, then i had not used it about 6 months, now when tried to use it again then it was throwing the error "Printhead is damaged, missing, not installed properly or damaged etc...", then i cleaned the printhead and reinstalled it in printer then i inserted the cartidge now its generating the error "please use setup cartidge that came with printer" but among the setup cardige "yellow", "magenta", "Cyan" is accessible by printer but when i use the black then it says "properly not installed, missing cartidge".
So please tell me do i need to purchase a new black cartidge, will it work? or what shoud i do ?
cartidge NO- 685
Thanks
NirmalHi @nirmal007,
Welcome to the HP Support Forum! I understand you're having cartridge issues with your HP Deskjet Ink Advantage 5525 e-All-in-One Printer. I would like to assist you with clearing up that error state and have some troubleshooting steps that may resolve the issue.
I recommend you try the following steps before you consider purchasing a new black ink cartridge. Firstly after you've confirmed that your ink levels are not the problem (example - the level is above 10%), try a 'hard reset':
Secondly:
Make sure that the ink cartridges are properly vented and seated correctly
If the vent on the top of the ink cartridge is clogged or obstructed, the ink cartridge might not work properly. Follow these steps to make sure that the ink cartridges are properly vented and seated correctly.
Press the Power button to turn on the printer, if it is not already turned on. Wait until the printer is idle and silent before continuing.
Open the cartridge access door. The carriage moves to the access area.
Figure : Open the cartridge access door
Press the tab on the front of the cartridge inward to release it, and then pull up on the cartridge to remove it from the slot.
Figure : Remove the cartridge from the slot
Examine the vent area on each cartridge, above the HP logo on the top of the cartridge.
Figure : Vent area on the top of the cartridge
If the cartridge still has the orange pull-tab attached, pull to remove it.
Figure : Orange pull tab
If the vent is clogged, use a straight pin to gently remove excess adhesive from the vent.
Figure : Clean the clogged vent with a pin
Clogged vent
With a straight pin, gently remove excess adhesive from the vent
Unclogged vent
With the nozzle and contacts facing down, slide the cartridge into its slot. Press down on the cartridge until it clicks into place.
note:Make sure that each cartridge is installed in the correct slot. Match the shape of the icon and the color of the cartridge with the slot that has the same shaped icon and color.
Figure : Reinsert the cartridge
Repeat these steps to inspect the vents on each of the cartridges.
Make sure that each cartridge is firmly in place in its slot. Run your finger along the top of the cartridges to feel for any that are protruding, and if any are, press down firmly until each cartridge snaps into place.
Close the cartridge access door.
Figure : Close the cartridge access door
Source
Thirdly, try cleaning your cartridge contacts:
Manually cleaning the print cartridge contacts
Follow the steps below to manually clean the print cartridge contacts:
Gather the following items to clean the contacts:
Distilled water (tap water may contain contaminants that can damage the print cartridge)
Cotton swabs or other soft, lint-free material that will not stick to the print cartridge
Open the print cartridge door.
Remove the print cartridge and place it on a piece of paper with the ink nozzle plate facing up.
caution:
Do not to touch the copper-colored contacts or the ink nozzle plate with your fingersFigure : Do not touch copper-colored contacts
caution:Do not leave the print cartridge outside the printer for more than 30 minutes. Ink nozzles exposed to the air longer than this may dry out and cause printing problems.
Lightly moisten a cotton swab with distilled water and squeeze any excess water from the swab.
Gently wipe the copper-colored contacts with the cotton swab.
caution:Do not touch the ink nozzle plate. Touching the ink nozzle plate will result in clogs, ink failure, and bad electrical connections.
Repeat steps 4 and 5 until no ink residue or dust appears on a clean swab.
Insert the print cartridge in the printer, and then close the print cartridge door.
Source
If you've tried all of the above noted steps and you're still unable to use the black cartridge, you may need to pick up a new one. Let me know if this helps. Best of luck!
E-roq
I work on behalf of HP.
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping! -
Bought macBook Pro a year ago and it came with Quicktime Player. Just bought Quicktime Pro and am having trouble downloading it. Do I need it? How do I download it?
You don't download QuickTime Pro directly; you download QuickTime 7 and apply the code you bought to it.
(76876) -
I bought a used macbook pro that came with xcode
I bought a used macbook pro that came with xcode, this means I can develop Apps but to publish in App Store needed pay developer fees? Or must pay these fees from now?
All you have are the basic tools. Without a paid program in your name, you cannot distribute apps to the store.
See iOS Developer Program -
Using an extrnal usb camera with yahoo messenger
Is there a way to use an external usb camera with Yahoo Messenger? I just dwonloaded the 10.3.9 upgrade hoping that would help, but no.....
I found a download called "macam that solved my problem.
-
How do I use a usb web cam with MacBook Pro
How do I use a web camera with a MacBook Pro? I want to run it through my laptop so I can project it on a screen for teaching a class.
b. todd wrote:
Can I record directly into iMovie with a usb web cam instead of iSight?
You can try it, but probably not.
This Apple article http://support.apple.com/kb/PH2134 explains that a Firewire-connected, tape-based camera or camcorder mode will work.
If you don't have access to one that works, a simple workaround is to record your video with QuickTimeX Player (the v.10.x one from Lion). You can import that recorded video into iMovie for editing.
If your Mac OS is earlier than Lion whose QuickTime does not offer movie recording as installed, use QuickTime7 Pro for recording.
Message was edited by: EZ Jim
Mac OSX 10.7.3 -
Using a Flip video camera with Final Cut Express
I've just recently bought one of those flip video cameras (http://www.theflip.com) which is great, but I can't seem to get the footage imported into Final Cut Express without it then needing to be rendered when I place it on the timeline.
Does anyone have experience using this camera with FCE, and if so, which settings did you use please? I've tried tweaking most of them with little success.
Thanks!Hi Simon,
in addition to Martin's instructions I suggest you to make sure, in MPEG Streamclip:
- you actually select Export to QuickTime (not Export to DV)
- you set the right frame rate (frequency), that is 29,97 for NTSC.
Personally I usually set Interlaced Scaling checked, and Deinterlace Video unchecked, but I'm not sure these are the right settings in your case.
With the above settings you should be able to import the resulting video into FCE without requiring any initial rendering, if the FCE Easy Setup is DV-NTSC.
Warning: I use MPEG Streamclip 1.8 (the latest as fa as I know) where the Frequency parameter is in the Export main window.
Piero
Message was edited by: PieroF
Maybe you are looking for
-
Work around for adding more than 1000 notes
I'm trying to load my bible onto my iPod and it consists of 1823 notes. Is there any what to increase the default number of notes that the iPod can accept? Hack...?
-
Hi Expert, I try to execute job on development system but he showed error "Error creating RFC function </BODS/ABAP_RUN>: <RFC_ABAP_EXCEPTION-(Exception_Key: FU_NOT_FOUND, SY-MSGTY: E, SY-MSGID: FL, SY-MSGNO: 046, SY-MSGV1: /BODS/ABAP_RUN)>. Notify Cu
-
I cannot run Airport Setup Assistant as the software is not compatible with my version of OS
Bought a pair of Airport Express adaptors to link to (a) a BOSE sounddock and (b) one of my TV's to stream music etc. Installed the software but my Mac Mini tells me v4.2 is not compatible with my version of OSX. When going to apps | utilities I only
-
Preferences Error: Could not load Sharing preference pane.
G'Day Folks, I'm getting a 'Preferences Error: Could not load Sharing preference pane.' when I try to launch "Sharing" from the System Preferences. Have rebuilt permissions etc. Was hoping the 10.5.1 update might fix it, but alas no. Any suggestions?
-
Master Data Scenario with SPS07 ???
Hi, I have tried to realize the Master Data Scenario from Lars Rüter. Since I have installed SAP Netweaver 2004s SPS07 I downloaded the SPS07 application & Source Code from /people/lars.rueter/blog/2006/06/26/create-master-data-centrally-using-guided