Using Accepted Solutions!

The
NI Discussion Forums has a new feature, the ability to mark a particular reply
as the solution to your question!
Marking
a solution allows other users to quickly and easily:
Identify the particular reply
that answers a question
See which threads have been
answered while browsing a board
Find messages while searching
that are solutions
When
you mark a reply as a solution to your question, the thread is marked as
"Solved" () and you can click on the "Go to Solution" icon to
jump directly to the accepted solution:
Best
practices:
If many users contributed to
the solution, be sure to give them Kudos for helping!
Usually you will mark a reply
from another user as a solution - only mark your own reply if you have
provided the solution to your question.
If you mark the wrong reply
as a solution or a better solution emerges, you can unmark the solution
from the Options menu.  You can
unmark a solution at any time.
Have a new question? Remember
to start a new thread! This will help other users see your new question
and allow you to mark the appropriate reply as the solution.  Only one solution can be marked per
thread.
I hope that you find this new feature useful!
Regards,
Laura
Web Support & Operations
National Instruments 
Message Edited by Laura F. on 10-15-2008 09:52 AM
Attachments:
solved.png ‏1 KB
acceptedsolution.png ‏2 KB
solvedbig.png ‏3 KB

* Waqar: 
You posted in the wrong forum and in the wrong thread for some unknown reason. Do you have problems with the online interface?
Try to post in the NXT forum for better results. Good luck.
LabVIEW Champion . Do more with less code and in less time .

Similar Messages

  • Hardware Scan Failure using Lenovo Solution Center G580

    I have a G580 Laptop, it's lessa than a year old now.
    I use both Hard Disk Sentinel (HDS) and Lenovo Solution Center (LSC).
    HDS showed an alert that one weak sector has been found.
    LSC gave this result code after the hardware scan WHD01V00I-HJ9C1E, it failed the "Targeted read test" and "SMART short self-test". How can I fix these problems and what do they mean?
    Thank you. 

    hi Casanova8,
    Welcome to Lenovo Community Forums!
    Smart Tests are critical for the HDD Performance and functionality.
      I would suggest running another test using HDTune
    Let me know your findings
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Does anyone here use Network Solutions? (shared hosting)

    I've been attempting to link to my mySQL database through the Dreamweaver interface for the purpose of writing web-based applications. I consistently get an error that indicates that some problem exists but is not specific. A colleague suggested that permission set on the mySQL server might not allow REMOTE accept to the database schema. I called Network Solutions and got a somewhat tenuous reply that perhaps their shared hosting services won't allow me to use Dreamweaver in this fashion.
    Does anyone here actually use Network Solutions (in other than a VPS-mode) and is successful in connecting to their mySQL database?
    (NOTE: I am able to get the phpMyAdmin application running on the Network Solutions server to connect and display the contents of the database. But the mySQL GUI applications connect and give some information but to date have not allowed me to the see the full extent of the databse information the way phpMyAdmin does.)
    Any suggestions for which ISPs do allow a successful connection would be appreciated. I am told too that many folks run a local version of PHP/mySQL on their Macs (which is what I am using) and do their work locally. Has this been the predominate mode of working for most of you?

    generally most people use a local testing server to do their work.  the easiest way to do this on your mac is MAMP. http://www.mamp.info/en/downloads/index.html
    Although macs do come ready to support php/mysql, it will make you're life much easier using mamp.  simply start it up and apache php mysql are all ready to rock.  test your pages in the htdocs folder and connect to mysql using the localhost connection (and make sure you pay attention to the ports... use 3306 if confusion sets in).
    as for connecting remotely to a database, yes it can be done... i do it all the time with my hosting (that is not NS), and you're have to do it that way if you're working on a sql server database / asp from your mac.  but for now, i'd just work locally.

  • Accepted solutions: mark a reply as the right answ...

    Hi all,
    we have just added a new feature called "accepted solutions" to these boards.
    It means that anyone who starts a new topic is able to mark any given answer as the correct solution. This helps other people who have the same question to find the right answer faster.
    All topics that have an accepted solution will be shown with a small icon, and the first post will have a quick link to the solution.
    Note that you can do this also with any old topics that you have started. So if you remember any particularly helpful answers from the past, feel free to visit those topics and mark the right answer as the solution.
    Solutions will not have any effect on your ranks (sage, professor etc.) but we may come up with new ranks in the future for people who have written a lot of solutions.
    Moderators and administrators are also able to mark solutions, but we will not do that systematically (e.g. no-one from Nokia is officially going through and validating any answers).
    However, we can mark a topic solved when it's clear from a "thank you"-reply that this was the right answer (starting from today, so please don't PM us a list of your existing answers )
    I hope you will find this useful! This is a new thing for us so we don't really know how it will work out - but it seems like a great little feature.
    Message Edited by vandelay on 17-Jun-2008 03:19 PM
    I wrote all my posts from 2005-2011 as an "Admin" for this community. I still work for Nokia as an external consultant, so my rank in all posts is now "Employee".

    02-Jul-2008 07:46 PM
    illinjah wrote:
    Funny that you can accept a solution that you wrote for a thread you started yourself...
    That's on purpose - sometimes people come up with the right answer on their own, and accepting that as the right solution helps others to find it as well.
    I wrote all my posts from 2005-2011 as an "Admin" for this community. I still work for Nokia as an external consultant, so my rank in all posts is now "Employee".

  • Message Tags, Kudos, and Accepted Solutions

    The Toshiba Forums feature a few ways to make it easier for forum users to find messages of the greatest interest to them by allowing forum members to add information about messages in the form of tags, Kudos, and Accepted Solutions. 
    Tags
    Tags are any words that help to describe what a message is about.  Each message can have many tags associated with it, and any logged-in forum member can create tags for any message.  Searches in the forums also look at tags when looking for messages to match search terms, so tagging messages increases the value of the messages for all forum members.
    Also, as you navigate through most screens of the forums, there will be a "Top Tags" area on the right side of the page.  This tag 'cloud' displays tags that are relevant for your current context within the forums.  Larger font tag terms indicate that a tag is used many times in the current area of the forums, while smaller font tag terms are used infrequently.
    To add tags to a message, just click on the red 'Add Tag...' button at the bottom of the message. 
    Kudos
    Kudos are a way for forum members to express appreciation for any message that they find particularly helpful, informative, or insightful.  Any forum member can give Kudos to any messages, but only one Kudo per message can be given by each forum member. 
    Each message displays the number of Kudos that have been given to it, so looking at the Kudos count is one way that forum users can identify particularly useful messages.  Also note that the total number of Kudos given in to all messages in a thread appears when you select a message board and view its list of threads. 
    To add your Kudos to a message, click on the red partial-star Kudos image to the left of each message.
    Accepted Solutions
    Many threads will be all about describing and finding solutions for various types of problems that people encounter when using their computers and consumer electronics gear.  The 'Accepted Solutions' feature provides a method for forum members who start threads to indicate when a reply has supplied a solution to the problem that had been experienced.  Each thread can have only one Accepted Solution and only the thread originator (and forum admin staff) can designate a message as an Accepted Solution for the thread.
    Messages selected as Accepted Solutions will have a graphical badge indicating that status, and the original message in the thread will include a link to jump down to the Accepted Solution.
    The Tags, Kudos, and Accepted Solutions features are provided to help forum users find the best of the best information here in the forums.  Please use them as often as you find appropriate.

    02-Jul-2008 07:46 PM
    illinjah wrote:
    Funny that you can accept a solution that you wrote for a thread you started yourself...
    That's on purpose - sometimes people come up with the right answer on their own, and accepting that as the right solution helps others to find it as well.
    I wrote all my posts from 2005-2011 as an "Admin" for this community. I still work for Nokia as an external consultant, so my rank in all posts is now "Employee".

  • I want to cut and paste iCal entries on iPad.  Have seen a number of questions raised but no definitive answer - is it possible or not?  (I use Bento but that doesn't sync with ICal now so can use that solution)

    I want to cut and paste iCal entries on iPad.  Have seen a number of questions raised but no definitive answer - is it possible or not? 
    (I use Bento but that doesn't sync with ICal now so can use that solution)
    Hope to hear helpful news soon....
    C

    No, the camera connection kit only supports the copying of photos and videos to the Photos app, it doesn't support copying content off the iPad. For your second camera instead of the SD reader part of the kit, does the iPad to camera cable not work with it for direct transfer to the iPad ?
    For Lightroom and Nikon software again no - you can only install apps that are available in the iTunes app store on your computer and the App Store app on the iPad, 'normal' PC and Mac (OS X) software are not compatible with the iPad (iOS). There are some apps that perform fairly basic editing functions that are available in the store, but nothing as sophisticated as, for example, Lightroom.

  • How can I send an email from Sharepoint Online using sandbox solution?

    How can I send an email from Sharepoint Online using sandbox solution?
    If possible I do not want to use workflow.
    Is It possible to do it without using workflow?

    hello Steven Andrews,
    when any user sends a message using contact us page in SharePoint online.
    1. We are inserting item in Contact Us List . - This is working fine
    for anonymous users also. We have used Office365 anonymous codeplex wsp and it is working fine. Anonymous user is able to insert new record in the Contact Us List.
    2. Once, new record is inserted in Contact Us list, we want to fire email notifying thanks to the user on his email id as well as to our company x person for notification of new inquiry. 
    We tried using Workflow having impersonation step for  anonymous user but it is not working for Anonymous users. Workflow is able to sent the email if someone logged into system but not working for Anonymous user although workflow is getting started
    but not able to send email although used Imperonsation step.
    We are stuck into implementing second step.

  • Can't load a page using Network Solutions website tool builder using Firefox 5.0.1; they recommend using 3.6! How do I get a copy of 3.6?

    I use Network Solution's Website Tool Builder to manage several websites. Since upgrading Firefox to 5.0.1, some of the pages no longer load and therefore I can't edit them. The sites come up okay in the browser, but not in NetSol's editor. When I called their tech support, they said it was a Firefox problem. They said I need to use Firefox 3.6...Is there a way for me to get a copy of that version of Firefox?

    I need to access Network Solutions website builder too. It isn't compatible with Internet Explorer v9, Chrome v13, or Firefox v5! I believe Firefox v6 is out now. This is a Network Solution's problem. What's involved in rolling back? Can you still get add-ons, plugins, and extensions for such an older version? You can't save your personal preferences can you?

  • Can I use this solution if using Mac OSX 10.9.5?

    Illustrator CS4 crashes whenever I attempt to print.  It crashes before the print box even appears.
    I found a possible solution here from Adobe Crash printing | Illustrator, InDesign | CS3, CS4 | Mac OS 10.7
    but it refers to 10.7 and I'm using a Mac OSX 10.9.5.  Does anyone know if I should use this solution??
    Any ideas or input greatly appreciated.  Thanks so much!

    By default, OS X Mavericks 10.9.5 Network MTU is set to 1500. If you perform the following at your SMB server, with an MTU of 1500, you will likely receive Message too long, and the SMB share takes a very long while to mount. This might be the contributing factor that has you believe it is an SMB MTU configuration issue.
    ping -c 1 -D -s 1500 smbserver
    If you dial the Network MTU down in a custom setting, the ping is immediate, and the SMB share mounts briskly. I tried values in small decrements until the message too long ceased.
    ping -c 1 -D -s 1472 smbserver
    I have done some searching and I do not see how, in Apple's current SMB implementation, that one can configure /etc/nsmb.conf to reduce SMB MTU size. See man nsmb.conf.
    More on this subject.

  • TS1506 This is not an acceptable solution. Apple please fix this issue. I can't ask my customers to change the format of an email. Seriously?

    This is not an acceptable solution. I cannot ask my customers to change the formatting of their email. Please fix this.

    Is it coming through as a winmail.dat file ? If it is then you could try one of the winmail.dat apps from the store and see if that works with it.
    Or is it coming through as a PDF but isn't downloading, opening or displaying correctly ? If so then is just the one PDF, all PDFs, from one sender ? Have you tried closing the Mail app via the taskbar and seeing if the PDF opens/displays when you re-open the app ? From the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.

  • For those who used the solution by Steve Muench,Dynamic JDBC Credentials

    hi every body
    is there any body used the solution by Steve Muench, Dynamic JDBC Credentials .
    thanks
    Yaser
    Edited by: 842127 on Mar 13, 2011 9:24 AM

    Hi,
    in the login page i have a button to make login which work perfect
    How can you say ?
    Whenever i click any control in the login page i see this message invalid username/passowrd . i do not why i face this problem ?I have tried changing the username,password and database using http://www.oracle.com/technetwork/developer-tools/jdev/dynamicjdbchowto-101755.html which works perfect.
    refer my thread
    Changing the database for a particular user session
    Regards,
    Santosh
    Edited by: Santosh Vaza on Mar 17, 2011 11:29 AM

  • Has anyone used Cabinet Solutions software on a Mac Book Pro?

    We currently use Cabinet Solutions software on a PC based computer and would like to upgrade to a Mac Book Pro.   I'm wondering if anyone has used this software on a Mac.

    Happens on my 2011 Macbook pro too - I have to use Citri for some apps and only the PNG components of the GUI disappears.

  • Top Accepted Solutions: April 2012

    What makes a thriving support community? Members who help to educate others and help them find answers/solutions to their problems. Thanks to all who did just that this month!
    Please remember to mark "Accepted Solutions"  when your issue is solved.
    Author
    # of Accepted Solutions
    1
    Hubrisnxs
    5
    2
    Smith6612
    4
    3
    Justin
    3
    4
    Holly1
    2
    5
    Mattheww
    2

    If I have a solution I always try to mark it, and if a user's issue is solved is should be marked by them. All users, including new users could help out by doing so. Is there a reminder that could be added added for all users to mark the issue resolved?
    Like under FIOS TV Technical assistance where we have "Severe weather information for our FiOS customers, click here.
    Perhaps another small line that says "Do not forget to Click the Accepted Solution when you have a solution."
    Just an idea. I know this is not the best place to put it.
    Thank you for the recognition
    Mark

  • Can I use SAP Solution manager

    Hi,
    we are using SAP R3 4.7 and san I use SAP Solution manager.
    is it requrie a seperate license to be purchase for it.
    and how to go about it.
    Thanks

    Yes u cn use wit ST PI & ST API packages installed ontRr/3
    https://websmp201.sap-ag.de/support
    check FAQ
    https://websmp202.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000718044&
    hopt it ans
    Regards
    Prakhar

  • Use of Solution Composer

    Dear Gurus,
    I am new to Business Process Expert area. When I read some documents on BPX, I came across that solution composer will help the analyst. Can any one help what is the exact use of solution composer? How effectively I can use it for Requirement gathering and analyzing? Where I can find more help about the solution composer? What are other tools available to expert in BPX?
    Thanks in advance.
    With Regards,
    Balachander Subbiah

    Hi,
    in the solution composer you find the Business or Solution Maps. These maps show the different business scenarios along the value chain and bundle together single business processes. The more you drill down the more details you will find, e.g. what SAP or partner applications are available to execute a scenario, process or process step. A more detailed description you can find here:
    http://www.sap.com/solutions/businessmaps/pdf/MISC_SAP_Solution_Composer_8_2005.pdf
    You can also download the solution composer and install it on your local machine. Just follow this link:
    http://www.sap.com/solutions/businessmaps/composer/index.epx
    After you made yourself familiar with the tool you can immediately start to build your own maps.
    But how does it help you?... Well what you can do e.g. is to build your own map and describe your process flows and requirements. Then you can match them to the SAP descriptions and check what applications are available. You can also go one step further and visit the ES Workplace (https://www.sdn.sap.com/irj/sdn/explore-es), which is an online version of the solution composer and check out what services are available to build own processes.
    I hope this helps!
    Best regards,
    Frauke

Maybe you are looking for