Using both iphoto 4 and 6 with same library-is this possible?

I just bought ilife 06 for my desktop computer (g4 400, tiger) but I also have an ibook (g3 500, panther) with iphoto 4 on it.
I have been using iphoto on the ibook, and have a fairly large library.
I would like to share the same library between the two computers, but I'm not sure that this is possible-it seems, from my research, that iphoto 6 uses a different file format, and I'm worried that if I open (or import) the library in iphoto 6, I won't be able to use it in iphoto 4 anymore.
lots of instances of the letter 'i' in this post
thanks
G4 400 AGP   Mac OS X (10.4.8)  

tabla369:
Welcome to the Apple Discussions. Once a library is upgraded to V6 it will to be usable by any previous version of iPhoto. So if you want to have the library on both computers you'll have to copy the V4 to the G4 library and convert it to V6 and run it as V6 and keep the iBook's library at V4. You might be able to connect the two computers together and try to share one library with the other (see iPhoto's preferences). I don't know if both libraries need to be the same version for that type of sharing as I've never done it.
Do you Twango?

Similar Messages

  • Can I use both iPhoto 6 and 5 on the same Mac?

    I gave up on iPhoto 6 when it comes to publishing web galleries (see my posts at http://discussions.apple.com/thread.jspa?threadID=456532&tstart=0 )
    Can I use both iPhoto 6 and 5 on the same Mac?
    Thanks!

    Lior:
    Welcome to the Apple Discussions. Yes you can but it takes a lot of caution! You can have both application running their own library. But the problem comes in when you launch V5 into the last used library, a V6 library, and it can corrupt that library so it won't open in V6 again. Conversely, if you open V6 and the V5 library was the last to be opened and you don't pay attention, you'll convert it to a V6 and lose the V5 access.
    So you have to make sure you ALWAYS launch iPhoto with the Option key depressed and manually select the library to use each time. Also Name each library differently. I use V6 LIbrary and V5 Library. You can rename your current one and then launch iPhoto with the Option key depressed and navigate to it to open it.

  • Simple question I have Adobe Creative Suite in my office and I want to be able to use it on another PC in the same room  Is this possible?

    Simple question
    I have Adobe Creative Suite in my office and I want to be able to use it on another PC in the same room
    Is this possible? – more than happy to only use one PC at a time as I am now using a colleagues PC
    I would need a password
    I have my original End User Purchase Order

    Adobe ID, sign in, and account help
    If that doesn't work, try Web Chat:
    Adobe ID and registration support

  • Using both iPhoto 6 and iPhoto '08 - 3rd party software?

    Hey guys,
    I recently purchased and installed iLife '08. After doing this I tried to run Still Life 2.3.4 This is a program that allows you to zoom and pan across photos for iMovie exactly the way you want. When I tired to run this program and open an old project I was working on, it said that it couldn't find the "rolls" in the iPhoto library where I had my photos stored. The next thing that I tried was to re-import all the photos from iPhoto '08. But Still Life does not even recognize the new library that iLife uses. My question is, is there a way to keep using iPhoto '06 while still keeping the other aspects of iLife '08. Or is there a way that you can have both iPhoto '06 and '08 at the same time? Please just give any advice. Thanks!

    Sorry, I am having trouble posting. Please disregard.

  • Bug with items stored both  as AAC and lossless in same library

    I have an itunes library of 16000 tracks spread across 2 x 250 GB drives encoded as apple lossless.
    I have also converted all the tracks to AAC, for ipod and airtunes use, and these tracks live on a 3rd drive
    I therefore have 16000 tracks in Apple lossless and 16000 identical titles in AAC in the same iTuneslibrary.
    Sometimes when clicking on an AAC title it instantly changes its kind to apple lossless and links to the apple lossless version of the file. When the library updates I often have thousands of AAC tracks changing to the apple lossless references.
    I can fix this by emptying the entire library and reimporting all the tracks using add to library. I just did this and again had 16000 of each file type.
    I then upgraded iTunes to 7.02 and upon lainch iTunes went into an automatic updating library routine.
    After it had finished I had 22000 Apple lossless tracks (i.e 8000 were new duplicate entries) and 8000 AAC tracks
    I had previoualy backed up the library after addinf all the files to an empty library so Ieplaced the library and.xml files and reopened itunes.
    Itunes openend with the correct number of files, but then immediately went into its updating library routine and again lost track of what should have been an AAC file and what should have been apple lossless
    The only thing I can think of is that the database is getting confused because the file extension for apple lossless and AAC is .m4a
    I have tried to replicate the problem using a small library on another computer, but can only conclude that the bug only affects large libraries, or libraries spread across multiple disks.
    Any help gratefully recieved as having spent 6 months ripping my CD library this problem is driving me mad.
    Best Regards
    Mic

    When you say they change to lossless, does iTunes
    simply think they are lossless or does it actually
    convert them to lossless (which would take a minute
    or so for each song)?
    No the AAC entries change to kind=lossless and they then reference the lossless version of the file. The files themselves remain unchanged, deleting the entire library and then adding the folders to the library restores the original setup
    A variation on this behaviour is that merely clicking on an AAC file will immediately change the kind of that file to lossless and the library entry will point to the lossless file. I can't reliably replicate this one, it just happens from time to time.

  • Can I use both iPhoto and Aperture on the same library?

    I like some of the features of iPhoto (like faces and places) but prefer to work in Aperture for its rich tool content. Is there any way I can use both iPhoto and Aperture on the same library? Or, import images from Aperture into iPhoto?
    Thanks much!
    John

    I think you may have answered a question I have with the above, but to be sure here is what I would like to do. I currently have iPhoto09 with about 50,000 pictures in it, which seems too much for it to manage. I would like to use Aperture, which I understand is better for managing a large number of photos, but still have iPhoto available to make slide shows, etc. for our AppleTV. Would the process you described above work for that?
    Thank you

  • Use both iPhoto and Aperture with one library-best practice?

    I'd like to use both iPhoto and Aperture, but have both programs use/update just one photo library.  I have the latest versions of both programs, but was wondering if the optimum approach would be to:
    a)point Aperture to the existing iPhoto library and use that as the library for both programs
    or
    b)import the entire iPhoto library into a new Aperture library, delete the iPhoto library, and point iPhoto to use the Aperture library.
    I should point out that up to now I've been using iPhoto exclusively, and have close to 20K photos in the iPhoto library, tagged with Faces, organized into various albums, etc; if that makes a difference...
    Appreciate any advice!
    Thanks,
    Dave

    Thanks Frank!  I'll try it that way.
    Appreciate the help!

  • Possible to use both Tabular and Multidimentinal with same SharePoint 2013 farm?

    I would like to build SharePoint 2013 based reporting portal with Power View as visualization tool.
    Is it possible to install both Tabular and Multidimentional to same physical server?
    Is it possible that some Power View reports use tabular and others multidimentional?
    Could above requirement work in production environment? Anybody tried?
    Kenny_I

    Hi Kenny_I,
    According to your description, you are going to create a PowerView report using SQL Server Analysis Services Multidimensional database or SSAS tabular model as data source in SharePoint 2013, now what you want to know is that is it possible to install both
    Tabular and Multidimensional to same physical server? And is it possible that some Power View reports use tabular and others Multidimensional?
    Of course we can install both Tabular and Multidimensional to same physical server that had SharePoint 2013 installed. In my tested environment, I have installed all of them on the same server. And we can use tabular model and others Multidimensional database
    on individual PowerView report. However, it seems that we cannot use both tabular model and others Multidimensional database on the same Powerview report.
    Even though we can install both Tabular and Multidimensional to same physical server, however in the production environment, the recommendation is that install them on different server, it will beneficial to troubleshooting the issue when some issue occur
    on the environment.
    If you have any questions, please feel free to ask.
    Regards,
    Charlie Liao
    If you have any feedback on our support, please click
    here.
    Charlie Liao
    TechNet Community Support

  • Using both iPhoto and Aperture workflow help

    I am using both aperture 3 and iPhoto 9 to edit and keep track of images
    I imported images to iPhoto the have Aperture import the iPhoto library this way I have i library..I know if something happens to it I am screwed
    1) I know that Aperture is non destructive, is iPhoto?
    2) will changes ( like GPS location) in aperture be applied to iPhoto images
    3) looking to see if I can make changes made in one program appear in the other
    4) or it it better to import the images in from my external drive (how they were before iPhoto), and have a separate library for each program

    Here's the best advice for using both iPhoto and Aperture:
    Pick one horse and ride it. They both do the same job. If you're shooting Raw or high volumes of Jpeg, then definitely go with Aperture. If you're doing family snaps with a point and shoot stick with iPhoto. Using both adds unnecessary complexity to everything, and with complexity comes the risk of error and data loss.
    1) I know that Aperture is non destructive, is iPhoto?
    Yes. In a wholly different way, mind you, but yes. WHen you edit an image in iPhoto it creates a new file called the Modified Version. You can always revert to the Original photo. If you edit only with iPhoto then you can also avoid generational loss.
    2) will changes ( like GPS location) in aperture be applied to iPhoto images
    No.
    3) looking to see if I can make changes made in one program appear in the other
    You can't.
    4) or it it better to import the images in from my external drive (how they were before iPhoto), and have a separate library for each program
    It makes no sense to use both programs.
    Aperture and iPhoto are entirely different applications that work in very different ways.
    The only communication between the two is as follows:
    Aperture is able to parse the iPhoto Library to allow it to import the contents while stacking the Originals and Modified versions, preserving metadata and so forth.
    Aperture can share its Previews with the iLife apps, including iPhoto.
    That's it.
    So, specifically, what interaction there is between the two is designed to facilitate migration from iPhoto to the more powerful app. After that, iPhoto has exactly the same relationship to the Aperture Library as, say, Pages or iMovie.
    iPhoto has no knowledge of, and knows nothing of how the Aperture Library works. It cannot read the Aperture library.
    What are you hoping to achieve by running both?
    Regards
    TD

  • Is it possible to use both an ILB and an ELB (listening on the same port) in the same Azure cloud service?

    I'm building a test Lync deployment on Azure; yes, I know this is not supported, hence "test".
    Lync Front-End servers expose two set of web services, one for internal users and one for external ones; they listen on different ports (443 and 4443) on the same servers; when external services are published, you need a reverse proxy or a port forwarding
    in order to map port 443 of a public IP address to port 4443 of the Front-End server(s). When you have multiple Front-End servers in a pool, you also need to load-balance them.
    So, a typical Lync deployment looks like this:
           Internal users
                     |
                   443
                      |
              Internal LB
            192.168.0.20
            443         443
              |               |
       Lync FE 1     Lync FE 2
    192.168.0.21 192.168.0.22
              |               |
          4443        4443
              External LB
           Public IP Address
                     |
                  443
                     |
           External Users
    This should be easily replicated in Azure, as it supports both external load balancing and internal load balancing. They are even supported together in the same cloud service, so this configuration should be easy. However, it looks like "should"
    is the keyword here.
    After creating the external load balanced endpoint (which listens on external port 443 and forwards to port 4443 on the servers), I'm trying to create an internal load balancer and add internal endpoints to is; however, while the ILB can be created successfully,
    adding an internal endpoint listening on port 443 and forwarding to port 443 on the servers fails miserably, with an error stating that port 443 is already in use by another endpoint:
    Update-AzureVM : BadRequest : Port 443 is already in use by one of the endpoints in this deployment. Ensure that the port numbers are unique across endpoints within a deployment.
    For reference, my commands are:
    Add-AzureInternalLoadBalancer -InternalLoadBalancerName "LyncILB" -ServiceName "LyncFrontEnd" -SubnetName "LabSubnet" -StaticVNetIPAddress 192.168.0.20
    (This completes successfully)
    Get-AzureVM LYNCFE1 | Add-AzureEndpoint -Name "Https-Int" -Protocol "tcp" -LocalPort 443 -PublicPort 443 -LBSetName "HttpsIntLB" -DefaultProbe -InternalLoadBalancerName "LyncILB"
    (This fails)
    The existing external endpoint is configured as such:
    Get-AzureVM LYNCFE1 | get-azureendpoint
    LBSetName : HttpsExtLB
    LocalPort : 4443
    Name : HTTPS-Ext
    Port : 443
    Protocol : tcp
    Vip :
    ProbePath :
    ProbePort : 4443
    ProbeProtocol : tcp
    ProbeIntervalInSeconds : 15
    ProbeTimeoutInSeconds : 31
    EnableDirectServerReturn : False
    Acl : {}
    InternalLoadBalancerName :
    IdleTimeoutInMinutes :
    LoadBalancerDistribution :
    The error doesn't even make a lot of sense; the external load balancer listens on a public IP address, while the internal load balancer listens on a private IP address in the internal network; there
    shouldn't be any conflict here... however it looks like there is one instead.
    Why doesn't this work? Am I doing something wrong, or is Azure networking just being silly as usual again?

    Hello Massimo Pascucci,
    The issue that you are facing when creating an endpoint with internal loadbalancer is the limitation of not allowing same ports to be listening under a single cloud service. This reason for this is that there is a limitation of only one private IP (Also
    known as the Internal load balanced IP) per cloud service.
    There is also a limitation on the Internal load balancer more than one port to be published per load balancer:
    You can leave your feedback by following the link below:
    https://social.msdn.microsoft.com/Forums/en-US/1805c5a0-3906-4cd6-8561-9802d77e0ae5/is-it-possible-to-use-both-an-ilb-and-an-elb-listening-on-the-same-port-in-the-same-azure-cloud?forum=WAVirtualMachinesVirtualNetwork
    Refer to this article for more information on Internal load balancer:
    http://azure.microsoft.com/blog/2014/05/20/internal-load-balancing/
    Thanks,
    Syed Irfan Hussain

  • How to use both ojdbc14.jar and ojdbc6.jar in same weblogic domain(weblogic12C)

    Hi all,
    I 'm having issue of using both ojdbc14.jar and ojdbc6.jar in same weblogic application and same weblogic domain in weblogic 12C environment.
    how can i do that?
    i'm currently having application developed using jdk 1.6 and ojdbc6.jar, application developed using jdk 1.4 and ojdbc14.jar.both are currently installed at same domain.
    i want to use the both ojdbc14.jar and ojdbc6.jar in same domain.
    what i previously did was renaming /usr/weblogic/wls_server10.3.4/lib/ojdbc6.jar to /usr/weblogic/wls_server10.3.4/lib/ojdbc6.jar.bak and put ojdbc14.jar in the same path when i wanna use ojdbc14.jar.
    i haven't use both in same environment before, but to go live i wanna match about requirement.pls help.
    i know the way use this by having two domains, but in the same domain i could not find a solution yet.
    Please help

    Hey
    I have the similar requirement.. Did you managed to get an option of doing it? If yes, please provide some insights
    Thanks in Advance

  • HT3204 Having purchased a Bluray of Les Mis with a digital download, I am unable to download the film through iTunes with each time I try it stops at 1.43GBytes.  I have attempted both Win8 PC and iPad with the same result.  Any ideas?

    Having purchased a Bluray of Les Mis with a digital download, I am unable to download the film through iTunes with each time I try it stops at 1.43GBytes.  I have attempted both Win8 PC and iPad with the same result.  Any ideas?

    Hello there, TindyBobbin.
    Just to make sure, here is a Knowledge Base article that reviews the process for downloading a digital copy:
    Transferring or downloading an iTunes Digital Copy
    http://support.apple.com/kb/ht1539
    If all of the steps still do not help with the download, you may want to follow what is mentioned at the bottom of all instructions:
    If you are experiencing issues downloading your iTunes Digital Copy, please contact iTunes Store Support.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • I am using both PSE 13 and Lightroom 5.  When I use Lightroom as an external editor and save the photo, it shows up in PSE13 as an edited file but does not look any different.  Why doesn't it appear edited?

    I am using both PSE 13 and Lightroom 5.  When I use Lightroom as an external editor and save the photo, it shows up in PSE13 as an edited file but does not look any different.  Why doesn't it appear edited?

    People who have Photoshop, but don't have Lightroom, need ACR so that they can use Raw files. Without ACR they could do nothing with those (they may also like having ACR so that they can work on other kinds of image using the same kinds of adjustments and techniques, as are used with Raw files).
    People who have Lightroom, can get access to Raw files regardless whether ACR is present or not. They can use Lightroom on other kinds of image also, using the same methods. LR can pass images directly into Photoshop without passing via ACR (or else does so transparently, which amounts to substantially the same thing).
    ACR does not, strictly speaking, even need to be installed for this external editing to happen. In fact, not even PS needs to be - since a different image editor can be used instead, while still retaining the Adobe Raw conversion etc.
    Lightroom "subcontracts out" specialised external tasks, in this workflow, but is still your "main contractor": the image is otherwise located, viewed, managed, adjusted/presented and output entirely using LR.
    So IMO we can divide image processing into:
    operations that involve pixels and layers and layer masks and adjustment layers etc (of the kind done inside Photoshop)
    operations that involve parametric edits (of the kind done in ACR where you are not using a Lightroom based workflow; otherwise, done inside Lightroom)
    When PS is called in, that's because those tasks are impossible or unsuitable to do in Lightroom. But those tasks can't be done in ACR either - by definition, since LR and ACR have exactly the same image processing "feature set".
    Lightroom is irrelevant to the Bridge + ACR + PS workflow. This workflow requires both your PS and your ACR to be current enough, to support your Raw format etc.
    ACR and Bridge are irrelevant to the LR + (image editor) workflow. It is in this case, only LR which needs to be current enough to support your Raw format etc.
    RP

  • TS1398 How can I use both, Windows PC and iMac, when using WiFi?. It is either-or. What can I do?

    How can I use both, Windows PC and iMac, when using WiFi?. It is either-or. What can I do?

    What does this have to do with using an iPad?
    But yes, you should be able to connect to your home WiFi network with multiple computers and devices. In my house my wife, my daughter and I will all be using the WiFi Internet connection at the same time with our Laptops and I will also be using my iPad, my daughter uses her iPhone, and we have no issues at all.
    Is this what you want to know about?

  • TS1424 everytime i try to download an app from itunes, or to 'view all' the apps listed, the error says; 'We could not complete your iTunes Store reuest. The network connection was reset' I used both my desktop and laptop both on Windows 7 Pro, & net is f

    everytime i try to download an app from itunes, or to 'view all' the apps listed, the error says; 'We could not complete your iTunes Store reuest. The network connection was reset' I used both my desktop and laptop both on Windows 7 Pro, & net is fine. please help. is there soemthing wrong with apple store temporarily?

    The latest message is: 'We could not complete your iTunes Store request. The network connection was reset.'
    In between, I got a messge about verifying my payment method. When I tried to submit the details, I kept getting a mmessage stating that my payment method was declined (my card is not near it's expiration date, and works fine).
    Argh!

Maybe you are looking for

  • Recurring Multi-Room DVR problem

    Hello. My multi-room DVR (new - installed in April) is repeatedly having issues lately.  Once about two weeks ago we turned it on and, though the FiOS live TV option was working fine, the DVR button brought us to a screen saying something about how t

  • Re editing a recorded action in PS cs4*

    Hi, I threw these same words to the community forum and it returned nothing relevant to my query! Actually there were only 2 entries. However in Google I got many accurate and relevant answers, the problem is that it does not work for me. I know i wo

  • Alerts are not coming in Alert Inbox SLG1

    Hi Experts, We have SAP NW2004s PI/XI system. We have defined alert configuration step by step with following, http://help.sap.com/saphelp_nw04s/helpdata/en/3f/81023cfa699508e10000000a11402f/frameset.htm /people/michal.krawczyk2/blog/2005/09/09/xi-al

  • Why doesn't sustain work when I've recorded a track with my sustain pedal linked to my midi keyboard?

    I can hear that the sustain works when I play my keyboard through the track, but as soon as I try to record, the sustain doesn't show on the recorded track. How can I fix this (if it can even be fixed)

  • Two types of queries in one report

    Hello, Does anyone know if it is possible in reports builder to query from two different systems, DB2 - jdbc and oracle - sql and then join the data based off a related field from each query. Then use this joined data to build a report? Please let me