Using camera accessory, I have imported photos to my iPad 3rd generation. By mistake I have imported multiple copies of same photos. Now if I want to delete additional copies I can't. It gives me only one option "Delete everywhere" instead of delete 1copy

Using camera accessory, I have imported photos to my iPad 3rd generation. By mistake I have imported multiple copies of same photos. Now if I want to delete additional copies I can't. It gives me only one option "Delete everywhere" instead of delete one by one, so that I can keep one copy of that photo.
Is there a way to delete additional copies of a photo and keeping only one?

The links below have instructions for deleting photos.
iOS and iPod: Syncing photos using iTunes
http://support.apple.com/kb/HT4236
iPad Tip: How to Delete Photos from Your iPad in the Photos App
http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
Another Way to Quickly Delete Photos from Your iPad (Mac Only)
http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
How to Delete Photos from iPad
http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
How to: Batch Delete Photos on the iPad
http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
(With iOS 5.1, use 2 fingers)
How to Delete Photos from iCloud’s Photo Stream
http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
 Cheers, Tom

Similar Messages

  • I took a picture using camera plus app and the photo shows up in my camera roll; however, when I tap to view it a gray box shown instead. I tried to download the image and only the gray box shows. Can anyone help me?

    I took a picture using camera plus app. The photo shows up in my camera roll as a thumbnail; however, when I tap to view the photo it comes up as a gray box. I tried downloading, emailing, and copying the picture, but it always saves as a gray box. Can anyone help me?

    Hi Giorgiovdb!
    Unfortunately I cannot help you; all I did was test for you.
    I did an upgrade over my Lion install with Mountain Lion which went fine. I just tested icon view in my Finder on different files and folders and here in my installation all stays fine; good readable like in column view!
    The only thing you might try is change your Font in Finder and set it back to the original afterwards!
    I quickly Google'd how to change fonts in the Finder as appearantly there's no obvious gui item for it:
    http://usermanifest.wordpress.com/2012/07/06/osx-finder-title-bar-font/
    Try to see if it brings you anywhere!
    At my post all fonts act normal after my upgrade to Mountain Lion; I don't do a clean install unless I really have to!
    Goodluck!
    Gaytan

  • No longer asks if I want to delete photos on camera. I cannot move photos to trash. how do I delete them?

    no longer asks if I want to delete photos on camera. I cannot move photos to trash. how do I delete them?

    it is rrecommended that you never have iPhoto delete your photos - import them and be sure they are safely in iPhoto and then after one (or more) backup cycles use the camera's format command to reformat the memorycard and delete the photos
    As to the lack of being ask
    A good general step for strange issues is to renew the iPhoto preference file - quit iPhoto and go to "your user name" ==> library ==> preferences ==> com.apple.iPhoto.plist and trash it - launch iPhoto which creates a fresh new default preference file and reset any personal preferences you have changed and if you have moved the iPhoto library repoint to it. This may help
    This does not affect your photos or any database information (keywords, faces, places, ratings, etc) in any way - they are stored in the iPhoto library - the iPhoto preference file simply controls how iPhoto works - which is why renewing it is a good first step.
    LN 

  • How can I erase a photo album that was uploaded from an old computer that I don't have no more? I have other albums in the Iphone that I don't want to delete.

    How can I erase a photo album that was uploaded from an old computer that I don't have no more? I have other albums in the Iphone that I don't want to delete.

    If you sync with the new computer it will erase the current content from the iphone and replace with the selected content of the new computer.
    The pics that you have taken with the iphone should be imported regularly to your computer as you would with any digital camera.  You can then organize them and sync them back to the iphone if you wish.
    If you have had itunes perform a backup on the new computer, you should get the pics taken with the iphone back, but I would import them before trying anything.

  • How do i see what photos are stored in my icloud.  I cannot do this without installing 8.0 or above which i cannot do as i do not have enough space on my iphone.  I do not want to delete the pics to make enough room to install 8.0 without checking

    how do i see what photos are stored in my icloud.  I cannot do this without installing 8.0 or above which i cannot do as i do not have enough space on my iphone.  I do not want to delete the pics to make enough room to install 8.0 without checking first that the pics are saved.  Thanks

    Good day AMELIASARAH,
    One resolution to your issue would be to update your iPhone using iTunes on your computer rather than over the air. This requires much less space on the iPhone as most of the work is done by the computer. See this article for how to do it -
    If you need more space for an iOS update - Apple Support
    Thanks for using Apple Support Communities.
    Safe computing,
    Brett L 

  • Have you chosen only one option button at a time

    Hi...
        I have got a problem while working with the option button in screen painter.I have three option buttons. In Run time, I want to select only one option button, mean while the other two option buttons should not be selected.
    ~
    Thank You in Advance
    Roseline Christina. B

    Hi,
    Please check the following
    To select an OptionBtn item, the item must be bound to a data source (UserDataSource or DBDataSource) using OptionBtn.DataBind
    The following is the sample to add 2 option buttons and group them.
    Dim optBtn As SAPbouiCOM.OptionBtn
        Dim oFrm As SAPbouiCOM.Form
        Dim oItem As SAPbouiCOM.Item
        Dim oUserdatasource As SAPbouiCOM.UserDataSource
        ' set oFrm = ..
        'Option 1
        Set oItem = oFrm.Items.Add("BD_rbRes", it_OPTION_BUTTON)
        oItem.Left = 240
        oItem.Top = 10
        oItem.Height = 16
        oItem.Width = 220
        Set optBtn = oItem.Specific
        optBtn.Caption = "Button One"
        Set oUserDataSource = oFrm.DataSources.UserDataSources.Add("BD_resDS", dt_SHORT_TEXT,1)
        optBtn.DataBind.SetBound True, , "BD_resDS"
        'Option 2
         Set oItem = oFrm.Items.Add("BD_rbPost", it_OPTION_BUTTON)
         oItem.Left = 240
         oItem.Top = 30
         oItem.Height = 16
         oItem.Width = 220
         Set optBtn = oItem.Specific
         optBtn.Caption = "Button Two"
         oItem.Visible = False
         Set optBtn = oItem.Specific
         optBtn.GroupWith ("BD_rbRes")
    Hope this helps,
    Vasu Natari.

  • I am trying to purchase Creative Suite CS6 Design Standard. I own a Max OSX. I live in Germany.  When I try to order for Germany, it gives me only an option for Windows, not Mac.  How can I order?

    I am trying to purchase Creative Suite CS6 Design Standard. I own a Max OSX. I live in Germany.  When I try to order for Germany, it gives me only an option for Windows, not Mac.  How can I order?

    In Germany no telephone number nor web chat is available.  Searching on the Adobe site tells me that this forum is the only avialable means to ask consumer questions.  I am giving up and ordering from elsewhere.

  • HT3384 I am using iPad 3rd generation. In "Pages" when I choose "blank" I cannot change the name. I bought a book on Pages on IPad but the photos show "my documents" and I do not have that - I just have "documents" or a + sign on the location where it sho

    My iPad 3rd generation does not let me name a document. Where the books say it should have "my documents" there is only "documents" or a + symbol, neither of them allowing my ability to name or rename. All my documents are titled "blank".

    Uh - never mind. I figured it out - the "documents" section (still no "my documents, file, or save as ) has a choice of date or name and when I changed that section I was allowed to rename. Don't know why all the references and guides use "my documents" and mine doesn't but as long as it works.......

  • I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

    I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

    Hi mafiose15,
    Thanks for visiting Apple Support Communities.
    Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
    How to restore iPod
    Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
    Download and install the latest version of iTunes if necessary.
    Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
    After a few moments, your iPod will appear in the Source panel in iTunes.
    Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
    Click Restore.
    If you are using a Mac, you will be asked to enter an administrator’s name and password.
    A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
    Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    Leave iPod connected to computer to complete restore (typically applies newer iPod models).
    During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
    Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
    After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
    You can find the instructions in this article:
    Restoring iPod to factory settings
    http://support.apple.com/kb/ht1339
    All the best,
    Jeremy

  • Firefox doesn't accept some sites and IT'S FREEZING sometimes and you can't write anything or click anywhere...reaaly disaponting, I have to restart it and after a while same thing, I can't close any tab only by options close tab.

    Firefox doesn't accept some sites and IT'S FREEZING sometimes and you can't write anything or click anywhere...reaaly disaponting, I have to restart it and after a while same thing, I can't close any tab only by options close tab so you can't use Command Q or Command R for reloading...GRRRRRrrrr, hate this

    As I asked previously are you able to have tabs open as a window by using the right clicking option ?
    When you close Firefox you should use
    *'''Firefox button -> File -> Exit '''
    Are you doing that ?
    I suspect what may be happening is Firefox is hanging as it closes down.
    * see [[Firefox hangs or is not responding - How to fix#w_firefox-hangs-when-you-quit-it]]_firefox-hangs-when-you-quit-it
    * this explains how to check & if necessary kill the process [["Firefox is already running but is not responding" error message - How to fix it#w_end-firefox-processes]]_end-firefox-processes
    A related possible problem is that you may have built up many copies of the restore files. These are stored in the Firefox profile. The easiest method of finding the profile location istouse
    *use '''Firefox button -> Help -> Troubleshooting Information <br /> -> [Show Folder]'''
    *see [[Profiles - Where Firefox stores your bookmarks, passwords and other user data]]
    You need to look for the files ''sessionstore.js'' and numbered duplicates of that. Delete them.
    * see http://kb.mozillazine.org/Firefox_hangs#Multiple_sessionstore.js_files

  • How to use the camera connection kit for iPad 3rd generation?

    Hi I just bought a new camera connection kit for my iPad 3rd generation. Does anyone have any experience or knows how to use it? I tried to connect a USB to it and nothing happened. Please help...

    This is how you use it.

  • If I want to purchase PhotoShop CS6 for my company, how many computers can install this copyright or only one time of installation?

    If I want to purchase PhotoShop CS6 for my company, how many computers can install this copyright or only one time of installation?

    YOu can install and activate on 2 computers for non-concurrent use.
    Mylenium

  • I purchased a monthly pack and havent been able to use it. I have been getting charged for 3 months now and I still get an error message saying "unable to load all your plans". How do I re-install or dowload and get my last 3 payments reimbursed?

    I purchased a monthly pack and havent been able to use it. I have been getting charged for 3 months now and I still get an error message saying "unable to load all your plans". How do I re-install or dowload and get my last 3 payments reimbursed?

    Link for Download & Install & Setup & Activation problems may help
    -Online Chat http://www.adobe.com/support/download-install/supportinfo/
    or
    Adobe contact information - http://helpx.adobe.com/contact.html

  • I have an Iphone 4, I have music files that appear on my phone that I want to delete, when I link it to my computer the songs on the phone will not appear in Itunes so I can delete them, Is there any way to delete these song off the phone without going th

    I have an Iphone 4, I have music files that appear on my phone that I want to delete, when I link it to my computer the songs on the phone will not appear in Itunes so I can delete them, Is there any way to delete these song off the phone without going through Itunes?

    Nope, it either needs to be plugged in or turned on with the power button.
    A replacement iPhone 4 is $149, but at least the whole phone is replaced.

  • I got a new computer and i cant get my music on my phone from iTunes. i got an mp3 file and got it on itunes but when i try to get on my phone nothing happenes. my family have helped me but nothing is working. i don't want to delete anything

    i got an mp3 file and got it on itunes but when i try to get on my phone nothing happenes. my family have helped me but nothing is working. i don't want to delete anything. DONT KNOW WHAT TO DO!!!!!!!!!!!!!

    Yes but all your previous content from the old computer will be erased.
    Read this:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive

Maybe you are looking for

  • How can I delete one iTunes account

    for stupid reasons I have three Apple ID's and iTunes accounts. I want to keep just one. Reason is that one of the old accounts keeps popping up when I want to update app's on my iPhone. This account does not work, it keeps asking questions about cre

  • ISDN Authorization with RADIUS using ISE 1.1.2

    Hi, I am trying to move my ISDN dialup branches authentication/authorization from old ACS 4.1 to ISE appliance. Before it was through ACS 4.2 with TACACS protocol but now since we are moving to ISE we are moving them to ISE with radius. Problem is th

  • Printing Single Quotation mark in PDF report

    Hi, we are working in Oracle Applications 11i, using Oracle database 9i and Oracle reports builder 9i. In Oracle Purchasing we have item descriptions entered in a PO as A'SSY_CONNECTOR . I can see it correct from the front end. When querying the tabl

  • How to control internet sharing via MAC access control list?

    Hello, I know how to share the internet over the Wi-Fi. I know that there could be a password. But I need to control users by MAC addresses, just like in the routers. So, I want to give an access ONLY to a several MAC addresses which I'll write in so

  • What does "Locating Timecode break" mean?

    This question from a novice (but did this a few times 2 yrs. ago with no problem). I am trying to capture from a VHS tape (not a movie or from TV). What should my users prefs (on the right side anyway) be so I can just capture the clip without this t