Using Captivate 8, is it possible to animate the movement of an object from the center of the slide to the top?

I have an object in the center of the slide. As the narration continues, I want the object to move up toward the top of the slide so that I can "fade in" a related (new) object just below it. How can I do that using Captivate 8? I tried using the Effect features and Motion Path, but there are no motion paths going up.

You probably missed that you can edit a motion path (not very easily, has to be done by dragging). This is an old article, but still the same work flow:
Editing Motion Paths and Reusing Customized Effects - Captivate blog
Lilybiri

Similar Messages

After the last update of Firefox, my toolbar menu became blank but the bookmarks are still available from a pulldown menu. I want the on the toolbar like they used to be. How do I recover this?

After the last update of Firefox, my toolbar menu became blank but the bookmarks are still available from a pulldown menu. I want the on the toolbar like they used to be. How do I recover this?

''Attaboyslim wrote:''
I am locked into firefox.
If nothing happens when you press the F11 key, check if you have the same problem in Safe Mode.
* [[Troubleshoot Firefox issues using Safe Mode]]
''Attaboyslim wrote:''
I'd like the old browser please.
* [[How to make the new Firefox look like the old Firefox]]

I want to use my macBook Pro 2,2 (mid 2007) to display video being fed from a Canon 5D video out into the vectorscope in Final Cut Pro 7.0.3. Is it possible to input live video from another digital camera into the MacBookPro

I know that the built in iSight camera records video. I want to set up a Canon 5D video camera and feed the Canon's video output into the MacBook Pro so that I can use the vectorscope in Final Cut Pro to adjust the exposure of the Canon 5D. Basically I don't want to buy a vectorscope to have on set to make sure the picture is properly exposed and color balance is correct. (In your response it doesn't have to be the full scenario I've described. If you can just tell me if there's a way to feed live video into the MacBook and display it on the screen and possibly record it, then I'll figure out the rest.)

Dear Ben,
Thanks for your help. Apple and I dealt with this. It was an FCP, NOT Motion problem. As It seems you understand, we simply trashed my FCP prefs. Problem went right away.
Thanks. Do you live near Hammond? Played in a rugby tournment down there once. I was transformed.
MS

Using iplanet console, is it possible to restore directory server A backup to directory sever B, if it's on the same box? Or on a different box?

I've tried and the data is there but not the object class or attributes. Also, what manuals do you recommend for the admin/mgmt of these servers? Thank you for your help ahead of time.

It seems that restoring a backup from server A to Server B is working if : the path names to the database are exactly the same (which implies a different machine), the indexes are exactly the same and the disk and filesystem are the same on both machines.
But this is not supported... ie we didn't fully tested it, and we don't really know when it works and when it doesn't.
Regards,
Ludovic

I created thirty pages using ipages and my web manager is having difficulty placing them on my website, some change color, some slide off the screen. Is there a place for problem solving for ipages and website?

Hi, I thoroughly enjoy the ipage program and prefer it to the similar one offered by Word. But my web manager is having countless difficulties. I converted everything to PDF's for him but several of the ipages are loading with a different backround color. He says he has to meta tag each page since this cannot happen automatically. On my Mac, the pages are loading after the navigation bar is selected, and it takes about three to four seconds. On my iphone, however, each page takes at least eight seconds to load and then it slides right off the screen before it can be read. I really want to continue using ipages to update my website but I am a rookie and do not understand why each ipage cannot simply open when someone goes to my website. It would be great to do away with the loading of each page and I would like to also minimize any of my margins. Thanks for any help on this strange matter. Mary

Converting pages to pdf is not the usual way make a website. You may want to try some other app where you can directly create the html which is the customary format for the web.

I cant open my iphoto. It says "To prepare the library, use the iPhoto Library Upgrader available from Apple." but when i download the upgrade it still wont open. Please help fist Mac iv owned

I cant open my iPhoto

You have to run the upgrader first then launch iPhoto - the upgrader is in Applications ==> utilities
LN

Is it possible to identify and migrate a single app from iMac to MacBookPro instead of all the applications?

In the migration of apps from my iMac to MacBookPro, one app did not migrate. Is there a way to redo the migration process but identify a single app and not the entire applications folder?

Consider Target Disk Mode:
http://support.apple.com/kb/ht1661
Ciao.

Creating a mobile app using Captivate as a base

Hi All
I am looking for some advice on a project I have been tasked with.
I am interested in making a stand alone mobile app. The idea is to create individual courses in Captivate, publish them to HTML5, and then include them in this app. A user may choose which Captivate course to take, click into it, and once completed return to the main app.
So far I can run the individual courses on the mobile devices using Phonegap.
My question is, can / should a Captivate project be used as the base for the actual mobile app. It should be able to...
1) Open other Captivate projects and be returned to once completed. Preferabbly being able to open to a specific slide in the project.
2) Record the results of the Captivate projects.
3) Provide a menu interface for selection of these individual courses.
Has anyone had any experience creating mobile apps with Captivate? Or should I build the actual app in some other way, and just link to the Captivate projects?
How might I record the results from a Captivate project when I am not using a system which already has the functionality (e.g. Moodle)?
Thank you for any help and insights you may offer.
Cheers
Lewis Carey

Hi All
I am looking for some advice on a project I have been tasked with.
I am interested in making a stand alone mobile app. The idea is to create individual courses in Captivate, publish them to HTML5, and then include them in this app. A user may choose which Captivate course to take, click into it, and once completed return to the main app.
So far I can run the individual courses on the mobile devices using Phonegap.
My question is, can / should a Captivate project be used as the base for the actual mobile app. It should be able to...
1) Open other Captivate projects and be returned to once completed. Preferabbly being able to open to a specific slide in the project.
2) Record the results of the Captivate projects.
3) Provide a menu interface for selection of these individual courses.
Has anyone had any experience creating mobile apps with Captivate? Or should I build the actual app in some other way, and just link to the Captivate projects?
How might I record the results from a Captivate project when I am not using a system which already has the functionality (e.g. Moodle)?
Thank you for any help and insights you may offer.
Cheers
Lewis Carey

Is it possible to get the position of a charcter from a string ?

Hi !
Is it possible to get the position of a charcter from a string ?
Example:
@VAR contains the following text "ABCDEFGHIJKLM"
I'am seaching for FGH, it start on pos. 6 en ends on pos 8.
How can I get these numbers 6 and 8 ?
So, I can use them in the MID(text,start,len) function.
Thanks!

Hi Sooraj,
I'll explain more in detail:
From a web-service I get a variable called @Spec.
This variable contains the following:
"MOTORTYPE[CR]D-QW1234[LF]PART[CR]1234-FRD-X[LF]"
or
"MOTORTYPE[CR]ABC[LF]PART[CR]E-435[LF]"
I need the values behind MOTORTYPE[CR] and behind PART[CR]
But youll see that the positions of these values are different each time.
If there is a way to get the (start) position of "MOTORTYPE[CR]" or "PART[CR]" and the (end) position of the first "[LF]" behind that,
then I could use the MID() function to get the correct values.
The values will be displayed in a table view (between other fields).
An ABAP-call/function wont work . . . how should I invoke this within a table column/field object ? (system action ?)

Do i have to have internet to use home sharing on my computer so i can watch my movies on my tv from my itunes library?

do i have to have internet to use home sharing on my computer so i can watch my movies on my tv from my itunes library?

Welcome to the Apple Community.
Yes

How do I get the Movies off my new Sony Handycam using iMovie?

WOW! I didn’t think that this would be such an issue!
So, I purchase a new Sony Handycam DCR-SR42 with a 30 GB
Hard Drive in it. I ask the sales person “Is this camera compatible
with my G5 Mac?” He says, it sure is! I take it home record the kids
around the house, and my daughter’s ballet recidal. COOL!
Then I go and try and downlaod the movies to my Mac. I come to
find out that the 2 cds that came with the camera are pretty worthless!
Sony states in one of the bullet points in the instruction manuel
that the software on the cd will not work on a Macintosh computer.
So, I figured, NO big deal, I will be using iMovie! Unfortunately
iMovie does not recognize the camera when I hook it up, because
it can only hook up using a USB connection. It doesn’t even offer
a Firewire connection, and iMovie ONLY recognizes Firewire.
I then find on one of the cds, a PDF of the Handycam Handbook.
It states in the PDF, that Mac users need to open the disk icon
on the desk top for the camera, and copy the files from the camera
to my hard drive. So I follow the steps and do this. Then I go to
open one of the files using Qucktime, and I get an error message
stating that Quicktime cannot open the file because it could not
parse it -2048!?!?!
Next, I go to the Apple web site to see if I can find anything to
resolve all this. I find an article “iMovie does not work with muxed
MPEG-1 and MPEG-2 clips” In the article it states that if the files
are MPEG2 Muxed files, iMovie can not support them!
I come to find out that the files are MPEG2 Muxed files. It seems
that the newer camcorders are using this format, because the files
are heavily compressed to allow the camera to cram more data
on the hard disk. The problem is you need some kind of software
to decompress these files in order to use them, and Sony doesn’t
include it for the Mac!
After more research I find - QuickTime MPEG-2 Playback on the
Apple web site. I purchase it for $19.99 from the site hoping this
will be the answer. Nope! It allowed me to open the movies in
QuickTime, and copy them into iMovie but they are only the
video portion. They have NO audio!
Anyone else run into this whole pile of BS?!?!!? If so, were you
able to figure out a work around? Or, are you stuck with a cool
camera full of movies, with NO way of getting them off with
sound? Well. unless you find someone with a PC that has
a DVD burner in it! Man, that thought scares the ---- out of me!
°Jeff Camp
camper
G5 Mac OS X (10.3.9)

Get a nice Sony miniDV camcorder. It is not too expensive; it is small and easy to carry around to shoot your video. Most importantly, it will be instantly compatible with iMovie. You don't have to install any software, just connect it via FireWire (Sony calls this iLink) and you are good to go!
I have had several Sonys and love them. You don't need one with fancy editing capabilities because you will edit your movies in iMovie. Just be sure that it has AV In and Out so you can import and export back to the camcorder.
My current version is the small DCR HC-26. There are newer versions of that HC-30something and 40something. Look at the specs on Sony's website
Some of them require the use of a dock to import and export. I am not really fond of that feature. I like just connecting directly to the camera.

Can't scan from Solution Center, using an HP Photosmart C4480 all in one

I bought a C4480 from a friend, did not come with the software CD. I downloaded the full-feature software package from the HP site. It prints from solution center but when I press the scan button in solution center nothing happens. I tried uninstalling and reinstalling the software several times without success. Is there any way to fix this? Is there a software glitch and is there a patch available? Is there a way to scan without using Solutino Center? I'm running Vista 32 bit on a Dell XPS A1530.
Thanks in advance for any suggestions on what to do.

Hello Ben,
I am sorry to see you are unable to scan from Solution Center with your Photosmart C4480. I understand you have uninstalled and reinstalled quite a few times and that did not resolve the problem. I would like to help you.
First, I recommend running HP's Print and Scan Doctor.
This is a tool used to search and help correct/target scanning and printing issues.
To answer your question, yes you are able to scan without using the Solution Center.
You can also use Paint, within any Windows operating system. (Select the top left down arrow, and choosing "From scanner or camera")
Also, you can use Windows Fax and Scan. You can find that by clicking on your start button and typing "scan" in the search and it should come right up.
If you are still unable to complete a scan, please try to make a copy on the printer.
You can also try Resetting your Printer.
Feel free to write back with your findings and any other questions or comments you may have.
Good luck!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Photoshop CS4 Crashes when using shift and the move tool

Please help!
Everytime I click on a layer with the move tool while holding the shift button (so I can constrain the movement), photoshop crashes. I get a message that says, "Could not use the move tool because of a program error". And then photoshop just shuts down.
Now I can use the move tool without holding shift, but as soon as I hit the shift button and try them together . . . crash!
What is going on?
I'm wondering if it has something to do with an updated video driver that I installed yesterday. It wasn't doing this before that.
Suggestions anyone? Please Please Please Help!

Have you tried rolling back the driver to see if the fault disappears?
You could also try resetting your preferences as described in the FAQ.
http://forums.adobe.com/thread/375776?tstart=0
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults.
(A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.)

Using multiple sets of speakers in stereo configuration (for movies)

I have hit a wall while trying to configure my stereo setup in my apartment. i'm trying to always take my stereo/audio setup to the full capabilities all the time, and i'm one small caveat away from making this idea work. hopefully someone can help me figure out this workaround.
i have my mac mini 2011 desktop setup to the right of the doorway (audio goes out FW800 to a pro tools mbox and outputs to the speakers), and there's a home stereo receiver to the left. the receiver plays to those shelf speakers, as well as speakers around the corner in the kitchen. both systems work well independently of each other, and sound like sets of speakers when they play sounds.
current situation: i finally ordered the long 1/8" extension cable to plug my mac mini headphones port into the stereo receiver, connecting the two. primarily so that i could switch outputs in system preferences and play tunes from my computer in the kitchen while cooking, but i learned about Aggregate devices and Multi-Output devices and i was able to use both systems at the same time, too.
but while i was ordering a 50' headphone cable extension, i got a long AC power cable and dvi as well so that the lady and i can put my monitor on the coffee table, connect it up, and sit on the couch to watch a movie with some popcorn n all that. the lady is pleased with a movie and popcorn, but i am unhappy with the options for getting the movie to sound right. We're watching pretty much in the sweet spot between the two systems.. here's my options:
1) __LR or LR__ - play the sound from either individual set of speakers. lady is happy, i can't stand it.
2) LRLR - play each system in a stereo configuration, lady is still happy, but it's still phase inconsistent. i am unsatisfied.
3 LLRR - this is the holy grail.
inside of the Audio Midi Setup window, i created a multi-output device called FULL STEREO to use the mbox and the headphone output @ the same time, and tried to "configure speakers"
i want my mbox to play the right channel through both speakers, and the built in output to play the left channel on it's two speaks. but it's not an option. check the error message.
I am hoping to not have to get out the soldering iron to make this work, but i am thinking i may need to get a small mixer and make some custom cables! i wanted to come and ask for advice first. can anyone help?

Do I need an AirPort to attach to each set of speakers that I want to connect, or is there another kind of receiver I can hook up to the speakers that do not have any kind of WiFi or Bluetooth configuration?
You basically have two choices: 1) Place an AirPort Express base station at each of the speaker locations, or 2) Use an AirPlay-Ready receiver that offers whole-home audio support. The latter would require that all speakers be connected back to the receiver.
Also, if I am planning to set up the airplay by using the extended network configuration, then the Wifi base station does not need to be an AirPort station? I have Fios and had trouble last time I tried to hook up an AirPort in place of the router that they provided.
The AirPlay networking protocol requires either a wireless or wired connection between the AirPlay server (typically iTunes) and the AirPlay speaker (AirPort Express, Apple TV, or an AirPlay-Ready receiver or speaker). AirPlay will traverse over an extended Wi-Fi network regardless of which manufacturer hardware is used.

Removal of non used autho object from SAP_ALL

Hi All,
I am having problem to delete the un used authorized object from SAP_ALL..
I have removed the Authorized object for Y_VAL_TYPE. I have deleted the profiles that use Y_VAL_TYPE except for SAP_ALL (it still thinks the others are still there not sure why.....I have not given up, but)
When I looked at Y_VAL_TYPE in RSSM doing the where used, I get the following print out. I do not know enough about to say for sure that we should not delete Y_VAL_TYPE. What does this tell you? To me it looks like the ZAVAL_TYPE and Y_VAL_TYPE are linked. I have deleted the RSR_00000001 & RSR_00000001. Then recreated, because I could not get them out of SAP_ALL, So they exist now with no authorization objects attached.   Any guidance, words of wisdom are greatly appreciate...
+
        0VAL_TYPE      <F> Valuation type
            ZAVAL_TYPE     <O> Authorization on 0VAL_TYPE
            Y_VAL_TYPE     <O> authorization on 0Val_type
                RSR_00000002   <A> Authorization for: Object Y_VAL_TYPE User CHOWN2
                RSR_00000001   <A> Authorization for: Object Y_VAL_TYPE User BHUJRK
                &_SAP_ALL      <A> Generated authorization for profile SAP_ALL
Can anybody help me out on this..i have to delete 0VAL_TYPE Authorized object .ZAVAL_TYPE Authorized object is being used i do not want to delete it.
Thanks in advance.
karuna

Hi Karuna,
Didnt really understand what your exact issue is?
Vicky

Using Captivate 8, is it possible to animate the movement of an object from the center of the slide to the top?

Similar Messages

Maybe you are looking for