Using cffile to make a unicode textfile

Hi, I am trying to make a unicode text file from a query, I
can make the file as a .csv file no problem using chr(34) as the
field seperateor character, and all works fine, However I want to
create a unicode .txt file that is identical to the same as the
file created by excel when I save a .csv as a unicode .txt. After
looking around in the cfforum I think I have learnt that I need to
use charset=utf-8 attribute in cffiel, but I am not sure what I
need to use as the seperator character (ie what does excel use?
when it saves as a unicode txt file) many thanks
Oli

You can try the code in the following example.
http://www.cflib.org/udf.cfm?id=1197&enable=1
In order to save the file in Unicode you can use such as
following syntax.
<cffile action="write" charset="utf-8"
file="#myPath#unicodeFile.txt" output="#myUnicodeContent#" />

Similar Messages

If you buy a itunes gift card, can you use it to make in game/app purchases?

if you buy a itunes gift card, can you use it to make in game/app purchases?

Thank you

I am trying to use songs I purchased from iTunes in my video using Windows Movie Maker. Can anyone tell me how to do that?

I am trying to use songs I purchased from iTunes, from my library if you will, in my video (slideshow) using Windows Movie Maker.
Does anyone know if that is possible to do? If so, would you please tell me how to do that?

Hello, a1p2r3.
Thank you for visiting Apple Support Communities.
There are a couple options available to you to transfer purchased media to your computer. Below, I have included a couple articles that outline this process.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/ht1848
Please note that this feature works only for items that were purchased on the iTunes Store. Any items imported from audio CDs or acquired from other sources will not copy from your iPod to the iTunes library.
Download past purchases
http://support.apple.com/kb/ht2519
Cheers,
Jason H.

HT201372 used this to make a bootable copy for a new hard drive installation. copied the install find but gave error code 110 when making the disk bootable.. Any help in what this code is

Used createinstallmedis to make a copy of the Mavericks app for use in a new hard drive install.. Copied find but gave error code 110 and failed to make the flash drive bootable.. Any help in what errror code means?

Did you partition and format the flash drive first? See the following:
Make Your Own Mavericks, Mountain/Lion Installer
After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
Make your own Mavericks flash drive installer using the Mavericks tool:
Mavericks has its own built-in installer maker you use via the Terminal:
You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this command line after the prompt in the Terminal's window:
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
Wait for the process to complete which will take quite some time.

Hi. I am trying to use Bridge to make web galleries. There used to be something on PS for that but now I cant find it in PS so I was advised to use Bridge. However, there is something called Output Module (AOM) that is missing from my Bridge. I download

Hi. I am trying to use Bridge to make web galleries. There used to be something on PS for that but now I cant find it in PS so I was advised to use Bridge. However, there is something called Output Module (AOM) that is missing from my Bridge. I downloaded this. The instructions say :Copy the Adobe Output Module folder (not the AOM_Package_[OS] folder) into the Bridge CC Extensions folder in the appropriate location:
Windows: C:\Program Files\Common Files\Adobe\Bridge CC Extensions
Mac OS: /Library/Application Support/Adobe/Bridge CC Extensions. However there is noplace on my Macbook Air running Yosemetie that has this /Library/Applications SUpport/Bridge CC Extensions. Can anyone advise?

That file could be set as a Launch Agent or Daemon in your ~/Library or /Library, You could try to look for it or Safeboot your computer and then empty the trash. Safebooting disables Launch Agents/Daemon and Third Party Kernal extensions. Here's the article to Safeboot OS X: What is Safe Boot, Safe Mode? - Apple Support

I am using Aperture to make a photo book. I have about 400 photos in the project. I am able to select the photos I want for 20 pages, then when I try to add a page, all the pictures are selected. How do I add additional pages and still control the pix

I am using Aperture to make a photo book. I have about 400 photos in the project that I am selecting from. I want to use about 70 for the book. I am allowed to pick and choose photos until I fill 20 pages. Then when I select add page, I am allowed to select all the pictures in the project. I am not allowed to select. I think I hve to change a setting, bt what? Thanks for the help.

. I am not allowed to select. I think I hve to change a setting, bt what?
David, have you enabled the "Autoflow" options? There are settings behind the cogwheel, that will automatically place unused images onto new pages. If you only want to select a few images from a large project, disable these two options:
Or start your book froman album, that only contains a selection of your images, rather than from the whole project.
Reagrds
Léonie

How to insert a simple page break in an eBook while using pages to make the ePub?

Hello,
I am using pages to make ePubs.
I have a problem: if I insert a page break in pages, it is deleted when I convert the file to ePub.
So I do not know how to start on a new page without adding a new chapter....
Do you have a solution?
best regards
MD

You are taking about Pages '09? because this has been removed from Pages 5.
Clunky as it may be it does have some very powerful features.
You can capture as many pages into a Section as you want, which automatically sets up a document in depth. Once you have done the work, it is super fast to compose a new document from all the parts.
It is a shame that Apple didn't simply fix what needed fixing with this model, instead of ditching it, because I am really stumped how to set up documents in the current version.
Peter

How to use Dashcode to make HTML Widgets in iBooks Author?

I'm writing books on iBooks Author, and I got a problem:
I wanna add some HTML Widgets to my books, and I was told I should use Dashcode to make them. So I downloaded the Xcode, but I don't know how to open the Dashcode on my Mac. I really hope someone could give me some lessons, I would be very grateful!

Start here: iBooks Author: About HTML widget creation

I DEVELOPED A WEB SITE USING WEB PAGE MAKER WITH A MOUSE OVER TO PLAY A WAVE. WORKS IN IE BUT FF WILL NOT LOAD THE FILE IN HE BACKGROUND. WHEN I FIRST OPEN THE PAGE TO TEST IT WONT PLAY THE .WAV ANY SUGGESTIONS ADD ONS ETC NEEDED THANKS

I've developed a site using "web Page Make" I put a graphic on a page with a mouse over that morphs the graphic and plays a brief wave. I works with I.E but no go in FF 3.63.I am previewing this off a local networked drive. No problems with other net site with embedded audio do I need a certain add on etc. Can anyone offer some advice. Thanks
== This happened ==
Every time Firefox opened
== I preveiwed the site and try the mouse over feature to excute the wave

Make sure that you do not use bgsound to pay that music.
See http://kb.mozillazine.org/Background_music_does_not_play

Creating a directory before using cffile

I'm having trouble using cffile right before I create a directory. I am using the cffileupload tag and my url attribute is a page that has the following code. Basically the code below creates a new directory and uploads all the images to that directory. However, it fails on the 2nd upload and i get a 500 error in the cffileupload flash object. However, if I hardcode the directory path, they all upload fine. Anyone know why I am having this problem?

<cfset uploadFolderPath = "C:\ColdFusion9\wwwroot\MyApplication\uploads\" />
<cfset date=DateFormat(Now(),'mm-dd-yyyy_') />
<cfset time=TimeFormat(Now(),'hh-mm-ss') />
<cfset newFolderName = "upload_" & date & time />
<cfset newFolder = uploadFolderPath & newFolderName />
<cfdirectory action = "create" directory="#newFolder#" />
<cffile action="uploadall" destination="#newFolder#" nameconflict="makeunique" />

It seems unlikely to be your problem, but be aware that <cffileupload> calls that URL once for each file uploaded, not just once. That means the <cfdirectory> could conceivably be called twice within the same second, meaning the second call to it might fail because the dir already exists.
You should probably check the dir exists before just assuming you're OK to create it.
Adam

I use a Flexislider for my website [url removed] I want to use flash and make my website attracti

I use a Flexislider for my website [url removed] I want to use flash and make my website attractive. Any suggestions?

Will people be able to login to the FTP server from my website and do everything through their browser?
Users could use web based ftp client or a 3rd party ftp client.
Have look at the sytem the following school uses.
http://www.glenbard.net/Glenbard_DistrictHQ/Media/MOVs/Web-BasedFTPClient.html
Although I have not setup this type of thing up myself googling around shows a few tutorials using PHP or Java based ftp clients.
have a look at this article..

I have an old iphone 3 32gb and don't use it to make calls as I have a 4s but would like to use the 3 for music any suggestions as to how I can sync two phones with I tunes

I have an old iphone 3 32gb and don't use it to make calls as I have a 4s but would like to use the 3 for music any suggestions as to how I can sync two phones with I tunes

Plug the device into the computer.
Select the content desired to sync.
Sync.

Make a PDF with a Mac, NOT using Mac PDF maker

I am suffering from blurry text when making a PDF in Mac OS 10.6 (using "Save as PDF" in the Mac printing dialogue).
The software company has confirmed the problem. They suggested using CutePDF to make a PDF because it does a better job. CutePDF is Windows only.

Also, could it be a problem with the software you are using (you didn't mention what it is?)
It is ViaCAD 2D. My text is razor-sharp when viewed from within ViaCAD. However, when I make a PDF of my drawing using, File > Print > Print PDF my text comes out blurry.
http://www.punchcad.com/p-6-viacad-2d3d.aspx
From the ViaCAD Fourm:
"This is an old and contentious issue that appears to effect some Mac users and not others.
The only work around I have found is to print to EPS (Postscript) in the print dialog, and then convert the EPS to PDF in Preview. Sadly the EPS output from the print dialog is also broken in that it will not support anything larger than 8.5 X 11, so that will not work for you.
The other work around might be to try and export the whole drawing to Illustrator using the File / Export dialog, but again that is also sometimes buggy for some people. The only good news is that the output that appears blurry on your Mac will probably look fine on a PC, or even another Mac as this does appear to be a very system dependent bug (which is why it never gets fixed)."

Uploading documents using CFFile

I am using CFFile for uploading documents using Cold Fusion 8
in my Intranet environment. Each record has a limit of 20 documents
that can be uploaded into MySQL database. It seems if I upload
mulitple documents at around 1mb it takes less than a minute to
complete. The problem seems to be when I upload muliptle documents
that are bigger.
If I attempt to upload 2 documents each over 25mb it takes
around 10 minutes.
Anyone have suggestions on alternatitve way to do this or
should I just limit size of each upload to 4mb and less?

Isn't this just a product of your internet speed and the size
of the upload?

I scanned an old image using my Epson NX515 printer, used GIMP to make some minor repairs on the image and printed it out. I noticed there were a number of evenly spaced thin blue lines across the image, approximately six of them.

I scanned an old image using my Epson NX515 printer, used GIMP to make some minor repairs on the image and printed it out. I noticed there were a number of evenly spaced thin blue lines across the image, approximately six of them. I opened & printed the image on my PC using PAINT.NET. No lines appeared. I sent the image to my daughter. She printed it and found no lines. I printed the image using Seahorse on my Mac and the lines still appeared. I used basically the same print settings on Mac and PC.

maahes wrote:
did so now, only now I'm getting a slightly different error: could not find udevd no such file or directory. I checked both grub.cfg's and my mkinitcpio.conf and there's no listing for udevd ....which I've never heard of, so I assumed it was a typo?
For clarification: udev is in the mkinitcpio.
I'm not sure whether I yet have a good intuition for how you have your machine set up, but I suspect you need to include a cryptdevice flag to the kernel in your grub config. The file isn't found because the kernel doesn't know your root directory needs decrypting first.
My setup is an LVM over LUKS over LVM sandwich. To boot into my system, the grub.cfg contains the line:
linux /vmlinuz-linux root=/dev/mapper/cryptvg-root cryptdevice=/dev/mapper/vg-crypt:root rootfstype=ext4 pcie_aspm=force acpi_osi=Linux acpi_backlight=vendor i915.i915_enable_rc6=1 i915.i915_enable_fbc=1 i915.lvds_downclock=1 ro
Now, most of those flags don't have anything to do with your problem, but note the cryptdevice. It tells the kernel it's dealing with an encrypted filesystem sitting in a logical volume called crypt on a volume group called vg. The bit after the colon tells the kernel to associate this encrypted filesystem with /dev/mapper/root.
As for how to fix your system, I'm afraid I still feel a bit fuzzy about how your LVM and encrypted layers relate to each other, whether you have LVM over LUKS, or LUKS over LVM, or something else. Was there a particular how-to that you followed?

Using cffile to make a unicode textfile

Similar Messages

Maybe you are looking for