Using concurrent program parameter in bursting

Hi there,
I am passing a concurrent program parameter into my rtf using the ?param@begin method & displaying it on the XMLP PDF output.
However when I am sending that PDF via bursting the param data does not show, even though it's present when viewing the PDF output via the concurrent request.
Does that mean I cannot do that and need to define the parameter as part of the Oracle report first?
cheers.

please check xml user guide

Similar Messages

How to validate concurrent program parameter and display a custom message?

Hi Friends,
I have a concurrent program which has two non-mandatory parameters.
The requirement is that user should provide value for any one of the parameters.
If user does not enter value for both the parameters, i need to display a custom error message.
Parameter1 has an independent value set.
Parameter2 has character value set with validation type as special.
Process i tried so far:
In the value set for the second parameter, under the Validate event, i have written the following code:
FND PLSQL "declare
l_paramb VARCHAR2(20) := :!VALUE;
l_parama VARCHAR2(20) := :$FLEX$.MOT_CUSTMSGTST_A;
BEGIN
IF 1 = 1 THEN
fnd_message.set_name('FND','FND_GENERIC_MESSAGE');
fnd_message.set_token('MESSAGE','Please enter any of the ip1 or ip2');
fnd_message.raise_error;
END IF;
END;" I am not using those variables that are defined for the time being.
Now since the condition 1=1 is always satisfied, i should always receive the error message.
I am not receving any error message and i can go ahead and submit the program..
Please advise on where am i going wrong.
Reports Version - 6i
Oracle Apps Version - 11.5.10.2
Regards,
Sreekanth Munagala

Hi srrekanth,,
I've similar issue , I need to display custom message for concurrent program parameter.Need to validate the parameter & display custom message .
Can you pl provide solution.

I can use concurrent program to do what

what can I use concurrent program for?

I think you should be able to connect an Apple TV to the projector via HDMI, then use AirPlay to mirror the iPad to the projector via the Apple TV. So the answer should be yes you can, you don't need any apps and you should be able to use any projector that can hook up to the Apple TV... but you do need to buy an Apple TV.

Help needed in setting Default Value of Concurrent program parameter

Hi All,
I have 3 parameters in a concurrent program
Org ID From
Org ID To
Currency Code
In the Currency Code parameter I want to use the following query in the Default Value
SELECT currency_code
FROM gl_sets_of_books sob, org_organization_definitions ood
WHERE ood.organization_id = :p_org_id_from
AND sob.set_of_books_id = ood.set_of_books_id
Now, at runtime this gives me an error of p_org_id.
Can anyone please advice me how can I use this parameter(p_org_id_from) in the above query.
Any help will be really appreciated.
Regards,
Shruti

Hi Helios,
Thaks a lot for the help.
I modified the query as follows:
SELECT currency_code
FROM gl_sets_of_books sob, org_organization_definitions ood
WHERE ood.organization_id = :$FLEX$.ORG_INTRANSIT
AND sob.set_of_books_id = ood.set_of_books_id
Here ORG_INTRANSIT is the valueset I am using in From Org ID and To Org ID.
Now the problem which I face is that when I use ORG_INTRANSIT valueset in both From Org as well as TO Org then the Currency is not defaulted, but if I use it in either From Org or To Org then the Currency is defaulted.
How can I resolve this. Please help.
Regards,
Shruti

Issue in concurrent program parameter.

Hello
I have one request set which has 2 concurrent programs. All the parameters of first programs are shared by 2nd program.
In first program there is one parameter p_load_seq where I am using default type=
"SQL Statement" and default value "select per_hr_br_outbound_seq.nextval from dual' .
If we submit this program/req set manually then it is taking the nextvalue correctly but If we schedule this job or copy this job/program it is not taking next value of the sequence.
Please let us know what is to be done to get the next value even if we schedule or copy this job.
Thanks
Ganesh Mane

This seem to be due to the fact that when You copy, previous execution parameter values are inherited, not defaulted again, and for scheduling, the values are derived when You secify parameter values and then they are carried to the next scheduled execution.
The only ways to circunvent this may be to obtain the sequence in concurrent program itself, and if that is not possible because of a standard program, You may code a launcher that calls the request set, so everytime it fetches the new sequence value.

Fnd_Standard_Date in concurrent program parameter

Hi All,
I hv a Pl/Sql concurrent program which has to accept date parameter in format 'DD-MON-YYYY'. I am using the value set, FND_STANDARD_DATE. But after passing parameter, it gets converted to 'dd/mon/yyyy hh:mi:ss', due to this the program is erroring out with the msg "ORA-01861: literal does not match format string".
Pls suggest a workaround.
regards
Suresh

Hi ,
in the PL/SQL do format mask for variable of date type to the exsting format of
FND_Standard_Date value set.
try with this.
--Basava.S

Error while running the rdf using concurrent program

Hi All,
I am facing the following error when i try to run the concurrent program
REP-0736: There exist uncompiled program unit(s).
REP-1247: Report contains uncompiled PL/SQL.
I am using a package in the program units. when i ues it the database its working fine. but when i use in the rdf.
it is throwing the above error.
Also the rdf is scuccessfully compiled.
Please let me know what should be done now??
Thanks
Jana

close report builder,
re-open
re-connect
open pgm unit procedure
compile each pgm unit individually
then ctrl+shift+k
ctrl+t
try now
CHK THIS LINK...may be while running, the user wont have access to the tables used in packages...
REP-1247 ERROR WHILE RUNNING REPORT
Edited by: Dora on Dec 15, 2009 10:00 AM

Getting error while uploading workflow defination using concurrent program

I have created a custom workflow. I am trying the upload in the testing instance using the concurrent program Workflow Definitions Loader in update mode.
I am getting the following error log:
Application Object Library: Version : 11.5.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
FNDWFLOAD module: Workflow Definitions Loader
Current system time is 20-JAN-2010 09:42:06
wferr:
- 1602: Could not save.
- 1400: Could not save to database. MODE=UPLOAD EFFDATE=<null>
- 1406: Workflow definition contains unsupported feature, cannot be uploaded to this database.
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
Output is not being printed because:
The print option has been disabled for this report.
Finished executing request completion options.
Concurrent request completed
Current system time is 20-JAN-2010 09:42:07
Oracle Workflow Definition Loader 2.6.4.0.
Access level: 100, Mode: UPLOAD
Unsupported type EVENT in attribute XXOWWIRC/EVENT_MESSAGE
Unsupported type EVENT in activity XXOWWIRC/CANDIDATE_REGISTRATION
Unsupported type EVENT in activity XXOWWIRC/CREATE_APPLICATION
Unsupported type EVENT in activity XXOWWIRC/CREATE_IRC_ASG_STATUS
Unsupported type EVENT in attribute IRC_GET_XML_VALUE/EVENT
Unsupported type EVENT in attribute COMPAREEVENTPROPERTY/EVENT
Unsupported type EVENT in attribute GETEVENTPROPERTY/EVENT
Unsupported type EVENT in attribute SETEVENTPROPERTY/EVENT
Unsupported type EXTJAVA in function WFSTD/XMLCOMPAREDATE
Unsupported type EVENT in attribute XMLCOMPAREDATE/EVENT
Unsupported type EXTJAVA in function WFSTD/XMLCOMPARENUMBER
Unsupported type EVENT in attribute XMLCOMPARENUMBER/EVENT
Unsupported type EXTJAVA in function WFSTD/XMLCOMPARETEXT
Unsupported type EVENT in attribute XMLCOMPARETEXT/EVENT
Unsupported type EXTJAVA in function WFSTD/XMLGETTAGVALUE
Unsupported type EVENT in attribute XMLGETTAGVALUE/EVENT
Unsupported type EXTJAVA in function WFSTD/XMLTRANSFORM
Unsupported type EVENT in attribute XMLTRANSFORM/EVENT
Unsupported type EVENT in attribute XMLTRANSFORM/NEWDOCUMENT
Note : The same concurrent program is uploading this work flow without any error in the Development instance.
Access level information is following:
Acess Level : 100
Check box Allow modification of customized object is not checked.
For all the workflow entities access tab information is following:
customization level : 100
Access Level : 100
Protection Level : 100
Option Preserve customization is checked
Option lock at this access level is checked.
Please suggest
Regards
Devender Yadav

Well - it shouldn't, but that doesn't mean that it won't make any difference :)
If only one method doesn't work (and I must admit that I never use the concurrent program if I can avoid it), then the problem lies with the concurrent program. If none of the methods work, then there is a different problem.
If you can deploy to one environment but not to another then I would also look at the differences between environments - patches, init.ora settings, profile options etc. to see where the difference lies.
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://www.workflowfaq.com/blog ?
WorkflowFAQ support forum: http://forum.workflowfaq.com

Date lov in the concurrent program parameter field

Hi,
I have a date parameter in the concurrent program. I need to have a date calendar for the parameter, can I have the data calendar? I am not sure if we can do that.
Can anybody throw some light on this.
Thanks a million
Regards
Ruma

Hi swati
u cannt create a multi select LOV for Apps concurrent program.
Some of the options:
-> Create different parameters. Also u cannt create parameters dynamically depending upon the number of options u want to give for that parameter, better fix the maximum no. of options say 5 .. ORG1, ORG2, ORG3, ORG4, ORG5
-> If multi select LOV are of high priority, go for Discoverer if it is a Report.
cheers
chakoo

Making Concurrent Program Parameter manadatory during runtime

Hi
For AR Invoice Print Reprot we want to make Customer number parameter mandatory based onsome responsiibilities used to submit this report
for other responsibilities mandatory option is not required. Would like to know if there is possible solution for this
Thanks
Kamalakar

You can try the following.
Add a new hidden parameter. The default for the parameter should be set to the responsibility_id.
And then in the customer number parameter's value set, you should say use the hidden parameter.
See How to make 2nd Param requried , when First Param is set to Y? for a similar example.
Hope this helps
Sandeep Gandhi
Independent Techno-functional Consultant

Register concurrent programs parameter customization.

Is there a way to register customization of concurrent programs parameters (I need to make one of the parameters mandatory) like it is done with customized files in applcust.txt?

Sorry about the late reply, but the issue with applcust.txt is that it only checks files updated by the patch. To provide an update to a concurrent program definition, Oracle includes an LDT file in the patch, but the name of the file doesn't have to relate to the concurrent program being updated. For example, the Purchasing concurrent program POXACREC is defined in the following files (look for the BEGIN PROGRAM "POXACREC" "PO" line in the ldt files in $PO_TOP/patch/115/import/US), shown in their applcust.txt format:
po patch/115/import/US cst4946920_1.ldt
po patch/115/import/US poprg.ldt
po patch/115/import/US poxacrec.ldt
Based on the name of the file and the concurrent program name, you would assume the last of these is the "correct" one, but all three could provide an update to the concurrent program definition. If you have multiple files defining your customised concurrent program, I would suggest you list all three in your applcust.txt. However, even if you list all three, there is nothing stopping Oracle from updating the POXACREC concurrent program with a file called abc123.ldt.
To help with this, I would suggest for your concurrent program you also include the concurrent program executable itself in the applcust.txt file (po reports/US POXACREC.rdf in my example) as a change to parameters in an unexpected ldt file would require a change in the program as well.
This basic problem can occur with any of data provided by LDT files or objects where the object name is not dependent on the file name - even views can be updated by odf files or sql files.
theFurryOne

How to make Concurrent program parameter should not dependent on previous parameter if it is blank else it should be dependent.

Hi,
Lets say, we have three parameters A, B and C. B is dependent on A, C is dependent on A and B. If A value is entered, then we can list only the values of B which are related to A. If User is not entered A value then how can we list all values available in B? In the sameway for C also ( If A and B values not entered then it should allow to select a value from all available values in C)?
I don't want to put default "ALL" value and then use this in other value sets to get all values. Is there any other way using some dummy parameters? I searched in threads but couldn't find relevant.
Thanks,
Venkat.

Hi,
Lets say, we have three parameters A, B and C. B is dependent on A, C is dependent on A and B. If A value is entered, then we can list only the values of B which are related to A. If User is not entered A value then how can we list all values available in B? In the sameway for C also ( If A and B values not entered then it should allow to select a value from all available values in C)?
I don't want to put default "ALL" value and then use this in other value sets to get all values. Is there any other way using some dummy parameters? I searched in threads but couldn't find relevant.
Thanks,
Venkat.

How to control range of dates in concurrent program parameters

Hi,
I have a requirement to show date fields in the concurrent program parameters and I also need a validation as follows:
TO_date between from_Date and from_Date+30
Can we achieve this ?
Any pointers/he is highly helpful as this is quite urgent for us.
Thanks in Advance.
regards,
Mukthi

Please see if these links help.
Enabling/disabling DATE parameters of a concurrent program
http://chandramatta.blogspot.com/2009/11/enablingdisabling-date-parameters-of.html
Enable/Disable Concurrent program parameter based on Other Parameter
http://sureshvaishya.blogspot.com/2008/05/disable-concurrent-program-parameter.html
Thanks,
Hussein

Simple card game with concurrent programming

Hi, I need help to program this problem in JAVA using concurrent programming, because I don�t understand how it can be solved.
Four card players are sitting in a table game. Each player has initially three cards � an ace, a king and a queen. The most valuable card is the ace and the less valuable is the queen. One move corresponds to the following interaction: each player puts a card in the table. The player who puts the most valuable card wins that move. A move can be gain by several players (if for example several players throw the ace). The game control is distributed, that is, each player is always trying to play but he only can play once in each move. After three moves, when the players have no more cards, the system indicates the punctuation of each player and the game ends.
Thanks in advance.

It would be easier without concurrency. Do you have to use threads? Anyway I have just posted a piece of code that coordinates processes. Each player would be one process (thread) so you start 4 of them. You then have to figure out how too keep track of the score.
http://forum.java.sun.com/thread.jsp?forum=31&thread=350773&tstart=0&trange=15

Detailed log when data template is run through concurrent program

Hi,
I have registered a data template and I am using concurrent program to generate the output (By giving executable name as XDODTEXE and making short name of the concurrent program as the code of the data definition).
When I run the concurrent program, it gives me the error
Calling XDO Data Engine...
[100306_024642974][][EXCEPTION] java.sql.SQLException: ORA-00900: invalid SQL statement
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
     at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:289)
     at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:589)
     at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1972)
     at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:1119)
     at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java:2185)
     at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:2059)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2976)
I have checked the sql query in TOAD its perfectly running. I am not able to find out where exactly the problem is in the SQL statement.
Is there any way by which I can see detailed log (which line of SQL statement caused this exception)?
Thanks in Advance,
Harvinder

The process to make an program incompatible with itself is described in MOS Doc 142944.1 (How to Make a Concurrent Program Incompatible with Itself) - you will have to bounce the concurrent managers for the setting to take effect
HTH
Srini

Using concurrent program parameter in bursting

Similar Messages

Maybe you are looking for