Using config file VIs and keep getting dequeue error

So I am using the config file VIs and I made some of my own VIs with additional functions for the progarm I'm working on. When I use the config file VIs on their own everything seems to work fine but then I use them from one of my custom VIs to another I keep getting a dequeue error in the "Save and Close INI.vi" VI. Below is how I have it set up right now... basically as simple as I can make it using my VIs. I attached a zip file with my subVIs and alsow the config file I was using if anyone finds time to look.
I've been trying to figure this out for a while and I j ust can't see to find any reasion why I would get a queueing error. I even dug down into the config file VIs and I'm really not sure why but it seems there is nothing in the queue.
Thanks in advance.
PS - don't mind the random notes and I know the disable is "messy" but I was just pulling it down and out of the way of what I was paying attention to.
Attachments:
INI VIs.zip ‏93 KB
config.ini ‏1 KB

It's unlike me to just give up on a problem so I kept looking at it and it turned out that my config file had a section label with no keys or values under it. This is what caused all my problems. Everything seems to be working 100% now.

Similar Messages

I use word for mac and keep getting an error message microsoft syn services has encountered a problem and needs to close. tell microsoft about this problem. even if i clicked send info to m/soft the message still comes up repeatedly i've turned comp off

i use word for mac & keep getting error message "microsoft sync services has encountered a problem & needs to close. tell m/soft about this prob" even if i tick send to m/soft and turn computer off & restart it just keeps reappearing repeatedly?

i use word for mac & keep getting error message "microsoft sync services has encountered a problem & needs to close. tell m/soft about this prob" even if i tick send to m/soft and turn computer off & restart it just keeps reappearing repeatedly?

I am using itunes 10 and trying to consolidate my files. I keep getting the error "Copying files failed. The file name was invalid or too long". How can I indentify what file is causing this problem or resolve this issue?

I am using itunes 10 and trying to consolidate my files. I keep getting the error "Copying files failed. The file name was invalid or too long". How can I indentify what file is causing this problem or resolve this issue?

BUMP
Yes, I just get that message. I don't see how I could investigate this problem.
I didn't mention that this happened when I was consolidating my library, not copying files to another computer.
In other words, I'm using a "normal" itunes procedure, itunes won't complete it, and won't tell me exactly why or how to figure out how to fix it...
Is there at least some easy way to tell which files were successfully copied to my itunes music folder so I can work on moving the uncopied files?
Can anybody help me?

I am trying to download itunes 10.6 and keep getting this error message, "The feature you are trying to use is on a network resource that is unavailable to a folder containing installation package itunes64.msi". What do I need to do?

I am trying to download itunes 10.6 and keep getting the error message "The feature you are trying to use in on a network resource that is unavailable. Enter alternate path to a folder containing the installation package itunes67.msi". Where do I find this or how do I get it?

"The feature you are trying to use in on a network resource that is unavailable. Enter alternate path to a folder containing the installation package itunes64.msi".
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Can't save my illustrator files. I keep getting "unknown error" message. Using version 6 on a macbook pro. OSX 10.9.5

Can't save my illustrator files. I keep getting "unknown error" message. Using version 6 on a macbook pro. OSX 10.9.5

42nato,
You may try the list (skip 5) in this case).
The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media, see below. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save current artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall (ticking the box to delete the preferences), run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them. Has anyone had a similar problem-.thanks

I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them. Has anyone had a similar problem….thanks

If you are having the same problem, i.e. a disk permission problem, open your favorite search engine and search on, "change disk permissions", and I think you'll find plenty of information on how to fix the problem. This is a Lightroom forum. Your problem is with your operating system. There is no sense in rewriting instructions that are already available if you do a simple search.

Trying to convert a word file to pdf and keep getting "An error occured while signing in"?

Trying to convert a word file to pdf and keep getting "An error occured while signing in"?

Or contact Adobe Customer Service via http://helpx.adobe.com/contact.html?product=export-pdf

I downloaded the icloud software on my computer in order to sync calendars and contacts using Windows 2007, but I keep getting an error message when trying to sync my icloud and Outlook calenders - can anyone help with this?

I downloaded the icloud software on my computer in order to sync calenders and contacts using Windows 2007, but I keep getting an error message when trying to sync my icloud and Outlook calendars. I downloaded it for the first time a month ago and had it working but it stopped syncing, so I deinstalled the iCloud software and reinstalled, but keep getting the error message "Your setup couldn't be started because of an unexpected error. What do I do now? Can anyone help with this?

Hello easbda,
Thank you for providing the details of the calendar issue you are experiencing with your iPhone. I recommend following the steps in the section titled "Troubleshooting on Microsoft Windows (Microsoft Outlook)" in the following article to assist with syncing your calendar events between your devices:
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/ts3999
Thank you for using Apple Support Communities.
Best,
Sheila M.

Using Adobe Captivate 7 and keep getting Adobe Captivate has stopped working...

I am new to Using Adobe Captivate 7 and keep getting Adobe Captivate has stopped working on Slide 7. What can I try?

Will you be delivering this content from an LMS? If so, then the LMS should handle the menu. Break your project into separate modules and use the Multi-SCORM Packager to create a bundled set.
If you are not using an LMS, but ARE serving content from a web server, then YES you could create a menu module that you use to launch the other modules.
If you are intending to serve this content from a LAN or CD ROM, then you could create a normal HTML web page with hyperlinks to launch individual modules.

I am trying to load iTunes and keep getting a error 126 and reinstall program. I have uninstalled and reinstalled twice and keep getting the same error message. How can this be resolved.

I am trying to load iTunes and keep getting a error 126 and reinstall program. I have uninstalled and reinstalled twice and keep getting the same error message. How can this be resolved?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

TS1363 How can i resolve this problem i cant sign in to my account and keep getting an Error code (11556)

I'm Running a pc with windows 7 and have an ipad 2 plus a ipod tuch which are synked to my computer. I Have a problem i hope someone can help me since i updated my my itune my files have showing up with the wrong names and ive been unable to sighn in to my account and keep getting this error code (11556) i dont know what it means any help would be greatly appreciated and my Thanks in advance cheers

Hello louderthanhype,
Thanks for using Apple Support Communities.
For more information, take a look at:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
"Error 11556"
This alert occurs when iTunes is trying to do something not allowed by the iTunes Store in that country.
The most common example of this is trying to sign in while limited to iTunes U by Parental Controls.
For more information, see the steps from iTunes 9: "One Moment Please" or "Error (-50)" message when accessing iTunes Store.
Have a nice day,
Mario

Trying to install itunes on win 8.1. keep getting error apple application support not found. asks me to uninstall and install itunes. i tried several times and keep getting same error.

trying to install itunes on win 8.1. keep getting error apple application support not found. asks me to uninstall and install itunes. i tried several times and keep getting same error.

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, see if iTunes will launch without the error now.
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

I can't acess itunes on my PC I tried to uninstall and keep getting an error message

I can't acess itunes on my PC I tried to uninstall and keep getting an error message

Try to download an older version of iTunes by Using Firefox browser from Mozilla

I'm signed in and keep getting an error while signing in

Trying to convert PDF file and keep getting the error sign

Please try updating the Reader. Go to Help -> check for updates.
Regards,
Anoop

I erased my HD. Now I can't instal mountain lion from my bootable flash drive, and keep getting "installation error. Try again."

I bought mountain lion, made a bootable flash drive.
I booted from it and it went to upgrading right away!
So I stopped it and went to my former recovery partition I erased my HD because I wanted a clean start.
Now I can't instal mountain lion from the bootable flash drive, and keep getting "installation error. Try again."
and there is no 4 choices window.
I don't know what to do.

How did you create the USB install thumb drive? If it was with Disk Utility I have run into this problem and have since used THIS program to make the USB install drive.
As to your problem you only have one option and that is to Reinstall the Original OS X version that came on your computer or if you still have the Lion Recovery Partition use that to reinstall Lion. Or if you system came with Lion and you have No Lion Recovery HD Partition you can boot the system from over the internet and Reinstall Lion.
At startup hold down the Command+Option+r keys until you saa a spinning Globe in the center of the screen. Once that loads Repartition the drive as One partition and then reinstall Lion.

Using config file VIs and keep getting dequeue error

Similar Messages

Maybe you are looking for