Using DB connect with SAP BW 3.5

Hello Expert,
I'm not sure if anyone has ever seen this kind of error message:
"Metadata for table A in BW is inconsistent. Check DataSource"
I just enhanced table A by adding one field in that table.
After that I edited data source in SAP BW and generated data source, I found some problem after loading data.
The error message from loading was "Field name LOCATIONCODE of object in DB system has been changed".
Therefore, loading was failed.
I tried to re-generate the data source from table-A and found the message "Metadata for table A in BW is inconsistent. Check DataSource".
In summary, there are 2 kinds of errors right now:
1) could not regenerate data source
2) could not load data into SAP BW
Any help would be appreciate.
Thank you very much
-WJ-

Hello,
Are the letters in the field name that you added in uppercase on the DB side? If not they need to be, I have
seen this as the cause of the error in the past for MSSQL databases, see the documentation at the link below:
->http://help.sap.com/saphelp_bw320/helpdata/en/58/
       54f9c1562d104c9465dabd816f3f24/frameset.htm
->Transferring Data with DB Connect
    ->Requests to Database Tables and Database Views
      ->Table names, view names, and field names
Best Regards,
Des

Similar Messages

Business Connector Connection with SAP

Hi!!!
I have a XML file with 3 fields with 100 records. I have in SAP a Z table with the same fields of the XML file.
I made the mapping in SAP BC Developer. I want to put the records of the XML in the Z table of SAP. How can I configure this to SAP BC connects with SAP and fill the table?
Thanks a lot for your help!
Regards!

Hi,
This might help you
/people/bla.suranyi/blog/2006/07/10/xi--sap-business-connector-integration-using-the-http-adapter
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/96ed2129-0b01-0010-2e91-c45e1fad0d03
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a8424011-0d01-0010-e19d-e5bd8ca52244
Kumar.S

Is Integration Kit from BO edge with DI (NUL) able to connect with SAP

Could any help me:
I have BO edge with DI (10 NUL) and it has integration kits for SAP
I would like to know that i'd like to know that Is it possible that I implement ETL using DI connect to SAP without purchase other BO contents
Regards,
Haruthairat.h

Hi,
this is what is called a Rapid MArt.
You would use Data Services to extract the data and load it into SQL Server
You would then use a Universe on top of SQL Server and create you reports.
Rapid Marts has all this pre-build for several SAP modules.
Ingo

C # Aplication connection with SAP Windows CE

Hi,
I have a problem with an aplication that I've made in Visual Studio C#. The problem is the next:
I've made an aplication that connects with SAP and passes some data. This aplication works well on any computer but I've got a problem when I tried tu convert the code and use it in a hand help pc. The version of OS of the hand held pc is Windows CE 5.0 and the error that I get when I execute my software is something related with the COM and the Class ID, the error says the next:
"COM object with CLSID '{B24944D6-1501-11CF-8981-0000E8A49FA0}' cannot be created due to the following error: Class not registered ."
I think that the problem could be with some dll that I don't have installed on the hand held pc but I don't really know which or what exactly.
Does anyome know anything about all of these??
Thanks.

Hi Julien,
To do the connection on a normal PC I include in the code the next references: SAPLogonCtrl and SAPFunctionsOCX.
Once they are included in my code I do the next:
private SAPLogonCtrl.SAPLogonControlClass saplogon;
private SAPLogonCtrl.Connection conexion;
private SAPFunctionsClass func = new SAPFunctionsClass();
SAPFunctionsOCX.IFunction sapfu = null;
Then I have a method to connect to SAP and other to pass the data. The one that connects to SAP is:
private void Connect_SAP()
saplogon = new SAPLogonCtrl.SAPLogonControlClass();
saplogon.User = usuSAP;//Usuario SAP.
saplogon.Password = passSAP;//Contraseña del usuario de SAP.
saplogon.Language = "ES";//Idioma.
saplogon.Client = cliSAP;//Mandante a través del cual nos vamos a comunicar con SAP.
saplogon.ApplicationServer = "10.10.20." + serSAP;//Ip en donde se encuetra el Servidor de SAP.
saplogon.System = sysSAP;//Entorno al que vamos a acceder.
saplogon.SystemNumber = System.Convert.ToInt16(num_Sis);
conexion = (SAPLogonCtrl.Connection)saplogon.NewConnection();
conexion.Logon(0, true);
DateTime hora = DateTime.Now;
if (conexion.Logon(0, true)==true)
MessageBox.Show("Conectado a SAP");
*Error1.Text += "SAP:Conexion establecida con exito" + "
Write_log("SAP", "Conexion establecida con exito",hora);
else
MessageBox.Show("No establecida conexión con SAP");
*Error1.Text += "SAP:No se ha establecido la conexion con exito" + "
Write_log("SAP", "No se ha establecido la conexion con exito", hora);
func.Connection = conexion;
if (sysSAP == "PRO")
labelSystema.Text = "Productivo";
else
labelSystema.Text = "Desarrollo";
Now the problem is that I want to use these code to make the same connection on a handheld PC but it doesn't work, when I execute the compilation on the handheld PC I get the next error:
"COM object with CLSID '{B24944D6-1501-11CF-8981-0000E8A49FA0}' cannot be created due to the following error: Class not registered ."
When this happens the compilation stops and it shos me the line in the code thar points to:
saplogon = new SAPLogonCtrl.SAPLogonControlClass();
I don't know why I get this error, I think that it could by that I'm not using the correct dll for a handheld PC that uses a Windows CE 5.0 O.S.. My question is: do I have to get a new dll that works on a handheld PC? or is it not working for any other reasson.
Thanks for your help.

HT4623 My iPod Touch is te 4th generation with iOS 4 only... The desktop that it used to connect with was broken and I couldn't update my iPod touch as all content is linked to the iTunes on that broken PC. What should I do?I won't erase all my music reco

My iPod Touch is te 4th generation with iOS 4 only... The desktop that it used to connect with was broken and I couldn't update my iPod touch as all content is linked to the iTunes on that broken PC. What should I do?I don't want to erase all my music recording. (couldn't back up easily...) my dairy, my financial record made on apps...
If I got a new Mac book pro soon, would it helps backuping everything?

awesome121, he does not an an iCloud account. You need iOS 5 or later for iCloud and the poster said he has iOS 4.
awesome121 wrote:
DO you have a icloud account?

Combine two reports in query designer using key figure with sap exit

Hi experts,
i want to combine two reports in query designer using key figure with sap exit
in the report 1 key figure calculation based on the open on key date(0P_DATE_OPEN)
to calculate due and not due in two columns
in report 2 key figure calculate in the time zones using given in variable Grid Width (0DPM_BV0) like due in 1 to 30 days, 31 to 60 days...the due amount based on the open on key date(0P_DATE_OPEN)
to calculate in 1-30, 31-60, 61-90, 91-120, 121-150 and >150 days in 6 columns
now i have requirement like this
not due, 1-30, 31-60, >60, due,1-30, 31-60, >60 in 8 columns
or
not due, due, 1-30, 31-60, 61-90, 91-120, 121-150 and >150 in 8 col
thank you

Hi Dirk,
you perhaps know my requirement,
for the management to make used in one report,
we have in reporting finacials Ehp3.
Vendor Due Date Analysis - which show due, not due
Vendor Overdue Analysis - show only due and analysis in time grid frame
i want to combine in one report that show NOT DUE, DUE, DUE time frames in grid.
krish...

Have you used Captivate 4 with SAP?

I have tried using older versions of Captivate to create SAP demonstrations and simulations, and wasn't particularly pleased with the output. My employer is happy for me to upgrade to Captivate 4. Before I do, can anyone share their experience of using Captivate 4 with SAP?
Thanks, KristinaWasa

Hi there
I have no clue what SAP actually is. So I'm going to ask that you clarify your request a smidge.
I'm wondering if you are asking if Captivate coexists with SAP so you may record what goes on with SAP?
Or is SAP a delivery mechanism similar to or possibly even a Learning Management System (LMS) and you are asking if Captivate content is easily delivered by and communicates nicely with this system.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Get connection with SAP

Hi
How is it possible to get connection with SAP system when i am working in SAP NetWeaver developer studio?
do i required any connector for this?
Regards

Hi Quali,
Inorder to get connected to the SAP system via your SAP NWDS(SAP NetWeaver developer studio).
1) Please check if you are able to get connected to the remote server, incase the server is on a different machine. You can do it by following the steps below:
Click on Windows Start menu -> click on Run -> Typein "cmd" and click on Ok button -> Typein "Ping 'IP address of the remote server'", I mean your remote server machine's IP address(Ex:10.6.52.189 or whatever it is). If it responds then please carry out the following steps in NWDS.
2) Please GoTo :
NWDS menu - > Window -> Preferences -> SAP J2EE Engine(Choose this on the left menu).
Now, if your server is not installed on the same machine on which you are working then go for the first radio button which says "SAP J2EE engine is installed on remote host" and enter the server's IP(Internet Protocol) address(Ex: 10.6.52.14, etc)in "Message Server Host" and enter 3601 in "Message Server Port".
Click on apply and Ok.
3) Now again Click on Windows Start menu -> click on Run -> Typein "drivers" and click on Ok button -> Open the folder "etc" -> look for file "Hosts", openwith notepad
-> Now typein the IP address and the corresponding host name(of the remote server)please note that the IP address and the host name should be separated by at least one space, preferably a tab space. -> save the hosts file.
Now you should be able to connect to your remote server.
Regards,
Sudeep

Receiving emails about a newly set up itunes account that does not belong to me (although has my name). The address used in connection with it seems to be in California and the person likes Justin Bieber - what's going on here?

Hi. I am receiving emails about a newly set up itunes account that does not belong to me (although has my name). The address used in connection with it seems to be in California and the person likes Justin Bieber (as I now have a receipt for that purchase). It states that it is billed to store credit. (a) I don't want to receive this person's information and (b) I certainly don't want to somehow be charged for it (although it appears, thus far, that I have not been). What's going on?

i didn't read a lot of your 2nd paragraph, but it seems like the password is the issue, right?
do a true clean install
reboot your machine and hold down command+option+r, you should see a spinning globe - if you don't see the globe or anything that reads internet recovery, shut down and try again
at menu, chose disk utility and once there, find your HD on the left side, select the physical name and erase it as mac journaled
exit disk utlity
at menu, choose install OSX
this time, when it asks for a password just hit continue, it will let you complete without a password
you should be able to get into your laptop, now figure out what password you'll be able to use with your kb issue

How can I connect with SAP NetWeaver 7.01 SR1 SP3 ABAP Developer Edition

Hello together,
I downloaded and installed the SAP NetWeaver 7.01 SR1 SP3 ABAP Developer Edition on a virtual client.
I toke a long period to finish the installation.
Now some questions to use this system in the right way:
1.) How can I get a "developer license" which do not expire? Because the link http://www.sap.com/minisap seems to be not ok.
2.) How can I connect via network with the sap system? the application server is running on a vm client with a static ip i.e. 192.168.1.5. And my laptop gets a ip in the same range. I have installed the gui on my laptop and tried to connect with the system. But it does not work! I used as application server the ip of the virtual machine. I use the gui witch is installed on the same host like the application it works (with localhost as application server adress)
3.) Where can I download the newest version of the SAP Gui? I do not have a service marktplace account? Is it possible?
4.) I read in the documentation that it should be possible to reach the sap system also with web dynpro: http://localhost:8000/sap/bc/gui/sap/its/webgui?sap-client=000
But it does not work. I got an error message: Service cannot be reached
Note
The termination occurred in system NSP with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
Regards
Christian

I fixed in the meantime the second problem. It was a problem with my local firewall. But the other three points are still open.
Thank in advance for your help

Authentication error when creating EPM Add-in connection with SAP BO Enterprise connection type

Hello, Experts,
I have a problem with creation of EPM Add-in connection when SAP BusinessObjects Enterprise connection type is selected.
An error message is "Error while communicating with the server. Framework message: Authorization failed."
Here are the steps that were implemented and how this issue was reproduced:
SAP BusinessObjects Planning and Consolidation 10.0 SP12 for Microsoft was installed and configured.
Integration between SAP BPC and SAP BusinessObjects BI 4.1 SP02 was implemented. SAP BO users can successfully connect to SAP BPC system.
EPM connector was successfully installed and deployed in SAP BusinessObjects BI server.
BPC ODBO 2.0 SP04 64BIT was installed in SAP BusinessObjects server.
EPM connection was successfully created in SAP BusinessObjects CMC.
EPM Add-in and BPC ODBO 2.0 SP04 32BIT was installed in another computer (let's call it CLIENT) which has MS Office 2007 32BIT installed.
From CLIENT computer we have launched Excel manually and successfully created BPC connection with Connection Type - Local.
Then we have logged into BI Launch Pad and launched New / EPM document (Excel). Excel has started.
In EPM Add-in we have pressed Logon.
In connection window selected SAP BusinessObjects Enterprise connection type.
An error "Error while communicating with the server. Framework message: Authorization failed." appears.
Before this error appears we are not getting any window where we could select EPM connection (created in CMC) nor the possibility to enter username or password.
Looking forward you valuable comments and suggestions.
Thank you in advance.
Donatas Budrys

Dear, Roberto,
Our user has Full Access to all BPC tasks and it is administrator in BI system.
Also we can successfully connect with the same user using Connection type "Local".
We had done some investigation and in the BPC SQL Server trace log we can catch the following message when an error occurs:
==============[System Error Tracing]==============
[System Name] : BPCXMLAService [Message Type] : ErrorMessage [Job Name] : ValidateUser [DateTime] : 04/23/2014 10:58:06 [UserId] : [Exception] DetailMsg : {System.Exception: Invalid user at SAP.BPC.Services.Webservice.XMLAService.XMLAService.ValidateUser()} ==============[System Error Tracing End ]==============
It is very interesting that after the EPM workbook is launched via BI Launch Pad till an error occurs we are NOT provided with possibility to enter any username and password. So the EPM add-in should use the same user which was logged into BI Launch Pad - in our case the user with administrative rights both in BI Launch Pad and BPC systems. Am I missing anything?
Looking forward your feedback.
Thank you in advance.
Best regards,
Donatas

Errors when trying to connect with SAP Netweaver BW Connection

Hi,
I'm trying to pull in data from a Bex query using the BW Connection.
I'm on SP4.
When I add the connection from Data Manager, I can logon to BW, however when I browse for queries I get .COM exceptions and Class not Registered errors.
Any ideas what could be causing this?
Thanks,
Angela.

Hi,
To design dashboards using BICS connection these are the prerequisits :
on the client side : Xcelsius Enterprise Designer 2008 SP2 or above (trial or engage versions do not offer this connectivity),
SAP GUI patch 901 or above
on the server side : NW 7.0 EhP1 SP5 with ABAP and Java stacks.
To view dashboard (run time) :
on the client side : a web browser, Adobe Flash Player
on the server side : NW 7.0 EhP1 SP5 with ABAP and Java stacks
Important Note: The BI Java stack and Single Sign On between ABAP and Java are a must have to get this connection working.
@Sri

BO XI3.1 Client tools connection with SAP BW

Hello everyone,
I have the following challenge:
I have an installation with Businessobjects XI 3.1 which connects to SAP netweaver BW.
When I use the client tools wich are installed on the server also, I can make a connection to Sap BW in the designer tool, and create a web intelligence rapport on this connection. When I get the rapport in Infoview, I can refresh the data, en this is showed.
When I Use the Client tool from a workstation, and test the connection, or refresh the data, is get the error message :
A database error occurred. The Database error text is: A runtime exception has occurred. (License key Check Failed. Check that you are licensed to access SAP data sources). (WIS 10901)
In Bussinesobjects I configured each server to a dedicated port, and made sure that every server can be reached for the workstation.
Somebody any suggestions for this issue? When I search on the error n=message, is get a few hintu2019s but they are not the problem, because it is running fine from the server.
I appreciate every suggestion.
With Kind regards,
Ronald van Amelsvoort.

Hello Dennis,
You're right, I did not have the SAP intergration kit installed, at the workstation. After installing it works.
I did not know, or did found this in the installation manuals.
Thanks for your help.

Business Objects XI 3.0/3.1- Connection with SAP ERP not with BW

Hi all members,
I have to confirm that can we connect "SAP Business Objects XI 3.0 or XI 3.1" with SAP ERP.
My client does not have SAP Business Warehouse. Neither they are interested to have SAP BW.
So, I have to confirm that can we connect "SAP Business Objects XI 3.0 or XI 3.1" with SAP ERP ?
Any other thing i have to go for?
Kindly any member guide me in bit detail.
Thanks and Best Regards,
Izhar

Hi,
currently it is not possible to build web intelligence reports fetching data directly from an SAP ERP system. The reason is that SAP ERP data sources are not supported in universes.
Regards,
Stratos
PS: An option is to deploy a BOBJ rapid mart. Please note that in this case you require the BOBJ Data services (ETL) tools. The idea behind the SAP ERP related rapid marts is that in the first step the data are extracted from your SAP ERP sources and load them into a relational database (using a predifined DWH scheme). Additionally the package provides you with universes (which rely on this predefined DWH scheme) and use the database as data sources, here your SAP ERP data were extracted to.

SAP PCM 7.0 Connectivity with SAP Business Objects

Hi All
We are trying to integrate SAP PCM 7.0 FP5 with Business Objects. The prime purpose is to fetch PCM data into Xcelsius dashboard and WebI reports via BO Universe.
We are sruggling to understand the plugins required to do this.Since other SAP documentation states that SAP BO Connectivity pack is required which is a part of SAP BusinessObjects Profitability and Cost Management 7.5 Support Package 06
But , we understand that SAP BO PCM75 Support pkg06 cannot be installed on SAP PCM 7.0.
Also, Please kindly help me in understanding if SAP PCM 7.0 connectivity with BOXIR3 (without using BW NW layer) is possible or it needs to be upgraded to SAP PCM 7.5
Thanks

Hello Siva,
I am thinking that you may need to deploy FTP adapter in PI to get this process work fine but not sure.
Let's see what other experts suggest.
Thanks,
Siva Kumar

Using DB connect with SAP BW 3.5

Similar Messages

Maybe you are looking for