Using different sources to display on the same indicator

I am using three slide bars and three different mathematical equations using the same indicator bars. I would like to control each equation with a different control button. When I hook up the output of each mathematical equation to the same indicator, I get indicators saying there can only be one output hooked to an indicator. Is there anyway around this??
Thanks

To elaborate on the previous poster's suggestion, I wrote the attached example
Jeremy
Attachments:
lv60_multiplex_string.vi ‏23 KB

Similar Messages

HT3130 trying to export a 4 minute video to desktop. Only 1:08 seconds exports. I've tried other clips and they all cut at 1:08. Used different exports like Quicktime with the same results.

trying to export a 4 minute video to desktop. Only 1:08 seconds exports. I've tried other clips and they all cut at 1:08. Used different exports like Quicktime with the same results.

Good to hear that you've had some success with the import.
I tried 3 times to do it before I finally changed it to H.264, and it worked on the first try. The quality of the compression was terrible with those settings compared to my standard settings, but I'm just glad it worked.
Rather than Share>Export using QuickTime and then choosing your own settings for H.264, you may get a better result if you simply use the Share>Export Movie option. Alternatively, use the Share>Media Browser option (as I mentioned in my earlier post). You will be presented with a range of sizes to choose from. Depending on your target, it's usually best to select the highest size available, such as Large, HD 720p or HD 1080p. However, for producing a DVD it's best to not go beyond the HD 720p size, as the DVD will be downscaled during encoding to Standard Definition in the appropriate size for either PAL or NTSC.
In my experience, both these options (Export Movie or Media Browser) produce a video file of excellent quality. The files will be in H.264 format and will have the file extension .mov or .m4v depending on the size of the export. I'm assuming that your camera records HD video in AVCHD format.
These files work well with iDVD (or other DVD authoring programs). The export process for the presets is optimised by Apple to produce high quality video files at a reasonable file size. So, selecting a preset may give you a much better result. Choosing your own H.264 settings when using the "Export using QuickTime" method could be why "the compression was terrible". You may have selected a data (bit) rate that was too low. There is always a trade-off between quality and file size when compressing video.
So, to summarise, try one of the Apple presets using either Share>Export Movie or Share>Media Browser.
John

How to Use different icons for JTree in the same level

Hi guys, i come cross a problem with JTree. The module need a JTree which need to represent items in the same level using different icons. For example:
[Icon for Root]Root
|
|_____________[Icon for Table] TABLES
|
|_____________[Icon for Index] INDEXS
|
|_____________[Icon for Views] VIEWS
As i know, the default behavior for JTree is using the same icon for all leaves and
the same icon for all node that has children. How can i achieve that?
Thansk a lot!

subclass DefaultTreeCellRenderer. if you overwrite the method below, then you can set the icon to whatever you want....!
    public Component getTreeCellRendererComponent(JTree tree, Object value,
                                boolean sel,
                                boolean expanded,
                                boolean leaf, int row,
                                boolean hasFocus) {
     String         stringValue = tree.convertValueToText(value, sel,
                           expanded, leaf, row, hasFocus);
        this.tree = tree;
     this.hasFocus = hasFocus;
     setText(stringValue);
     if(sel)
         setForeground(getTextSelectionColor());
     else
         setForeground(getTextNonSelectionColor());
     // There needs to be a way to specify disabled icons.
     if (!tree.isEnabled()) {
         setEnabled(false);
         if (leaf) {
          setDisabledIcon(getLeafIcon());
         } else if (expanded) {
          setDisabledIcon(getOpenIcon());
         } else {
          setDisabledIcon(getClosedIcon());
     else {
         setEnabled(true);
         if (leaf) {
          setIcon(getLeafIcon());
         } else if (expanded) {
          setIcon(getOpenIcon());
         } else {
          setIcon(getClosedIcon());
        setComponentOrientation(tree.getComponentOrientation());
     selected = sel;
     return this;
    }

How to use different pageFormats while printing in the same book object.

Hi All,
I m able to print Multiple pages, but the problem is when i want print multple pages with different pageformates I mean One pages having 4X2" size and another one is 5X5", while print second page objects not appears properly
Pls see the below code to get the problem.
any works around this will be appreciated.
import java.awt.BasicStroke;
import java.awt.Color;
import java.awt.Graphics;
import java.awt.Graphics2D;
import java.awt.geom.Rectangle2D;
import java.awt.print.Book;
import java.awt.print.PageFormat;
import java.awt.print.Paper;
import java.awt.print.Printable;
import java.awt.print.PrinterJob;
public class MultiplePageFormatTest
public static void main(String[] args)
MultiplePageFormatTest example3 = new MultiplePageFormatTest();
System.exit(0);
private final static int POINTS_PER_INCH = 72;
public MultiplePageFormatTest()
PrinterJob printJob = PrinterJob.getPrinterJob();
Book book = new Book();
PageFormat documentPageFormat = new PageFormat();
PageFormat documentPageFormat1 = new PageFormat();
Paper paper = new Paper();
Paper paper1 = new Paper();
paper.setSize(4.5 * POINTS_PER_INCH, 2.5 * POINTS_PER_INCH);
paper.setImageableArea(.25 * POINTS_PER_INCH, .25 * POINTS_PER_INCH,
   4 * POINTS_PER_INCH, 2 * POINTS_PER_INCH);
documentPageFormat.setPaper(paper);
paper1.setSize(5.5 * POINTS_PER_INCH, 5.5 * POINTS_PER_INCH);
paper1.setImageableArea(.25 * POINTS_PER_INCH, .25 * POINTS_PER_INCH,
   5 * POINTS_PER_INCH, 5 * POINTS_PER_INCH);
documentPageFormat1.setPaper(paper1);
book.append(new Document(), documentPageFormat);
book.append(new Document(), documentPageFormat1);
printJob.setPageable(book);
if (printJob.printDialog())
   try
    printJob.print();
   catch (Exception PrintException)
    PrintException.printStackTrace();
private class Document implements Printable
public int print(Graphics g, PageFormat pageFormat, int page)
   Graphics2D g2d = (Graphics2D) g;
   g2d.translate(pageFormat.getImageableX(), pageFormat
    .getImageableY());
   g2d.setPaint(Color.black);
   g2d.setStroke(new BasicStroke(
    2));
   Rectangle2D.Double border = new Rectangle2D.Double(
    0, 0, pageFormat.getImageableWidth(), pageFormat
     .getImageableHeight());
   g2d.draw(border);
   return (PAGE_EXISTS);
}

Hi,
Till now this question is not answered.........
Any Answer around this deeply apprciated.
Edited by: DoraiRaj on Sep 29, 2009 3:55 AM

I have just updated my Ipod to the latest ios.(deleting everything) and using different sources to get my music back it seems that every time i select multiple/individual songs on itunes i can change artwork but will not show up on my ipod?

I have a windows 8 computer and have recently updated my ipod to the latest ios and it has wiped my Ipod clean except for my photos. whilst trying to get my music back using different sources like CD's and stuff i cant seem to get any album art to load on my Ipod? I can go on itunes and highlight single/multiple items and change the artwork and my computer will confirm it but when I look on my Ipod it doesnt display any art work or allow me to change the artwork that is already there? i need help please!

Album artwork can be added/changed on songs via the iTunes Get Info menu item from the File menu. Note that music that you loaded from CDs will not have any artwork. If you want to aquire artwork you can try the File menu item Library > Get Artwork or you can download artwork from the internet, etc. Note that just changing artwork on your computer won't affect the iPod until you sync.
If the artwork is correct on your computer iTunes then delete all the music on your iPod by syncing with iTunes with no music selected. Then reload the music onto your iPod by again syncing with iTunes with all the music you want selected.

How do i set up a second display for my iMac desktop? I want to use both displays at the same time.

how do i set up a second display for my iMac desktop? I want to use both displays at the same time. My iMac is the 24" Late 2006 model. I recall that there is a cord for plugging in a second monitor, but I want to make sure that i can use both monitors side-by-side at the same time. thank you.

If the Display supports DVI, then you will need a > Mini-DVI to DVI Adapter and a DVI cable.
If the Display only supports VGA, then you wiil need a > Mini DVI to VGA Adapter and a VGA cable.
Noting that the (digital) DVI is far better than the (analog) VGA connection.
Also see > Using Dual Displays on Mac OS X: The Experience

Can I use one Apple TV device on two different HD televisions to view the same info from a mini Mac?

Can I use one Apple TV device on two different HD televisions to view the same info from a mini Mac?

Welcome to the Apple Community Lschaef5318.
You need one Apple TV for each TV.

How can i connect to a LAN and external display at the same time using the mini-displayport?

Hi all,
At work i'm connected to the Lan via an adapter and the mini displayport. I want to use my external display at the same time, which use the same mini displayport. Are there any splitters available to use both at the same time? Are there any other alternatives?
Thanks,
Dennis

There are USB to ethernet dongles:
http://store.apple.com/us/product/MC704ZM/A/apple-usb-ethernet-adapter?afid=p219 %7CGOUS&cid=AOS-US-KWG-PLA

Urgent - HTML help merged projects - displaying in the same window

Hi All,
Following some recent windows updates I'm experiencing all sorts of problems. My most urgent problems is as follows:
First off this is all in RH8 and yes I have upgraded to 8.0.2 and project is set to re-build cpd each time.
So I have a merges project as follows:
Parent project
child project 1
chils project 2 etc
when I compile an html help project with TOC, and single source window settings on default if I click on a child project it is diaplyued in a separate window. If I then select a different project in the parent project TOC this is also displayed in a different window but the window still has the caption of the previously opened file.
What I need as the end result is for my HTML help project output to al display in the same window whether I click on a parent project item, or a child project item.
Please can somebody advise mne how to do this as I am VERY close to a deadline and as usual it seems RH8 has let me down again.....
Thanks
Author Care

Hi there
Methinks Colum needs more coffee, because the options he cited have nothing to do with other windows. They have to do with whether the displayed topic synchronizes with the TOC and whether the TOC entry is highlighted.
I'm thinking it has to do with creating a "Global" window. You change the names of the windows so they include Global.
The link below has more:
Click here to view
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Can anyone give me simple instructions on how to use more than one ipod on the same computer with itunes? Both my daughters have ipods, my wife has one

Dear All
Can anyone give me simple instructions on how to use more than one ipod on the same computer with itunes. My daughters have a different generation 'nano' each & my wife a 'shuffle'?
Many thanks

Click here for options.
(69081)

HT1420 Can you have more than one device with a different Apple ID authourized to the same computer

Can you have more than one device with a different Apple ID authourized to the same computer

I think you are using the same Composition Class on both project. On the properties tab, you can change this number (e.g.: EDGE-1637270).

Can i use 2 channel of USRP at the same time to receive a signal?

Hi everyone,
i want to do an implementation of time difference of arrival estimation between two receivers (antenna). I have an USRP kit, daughterboards and two antennas. There is only one source signal ( it is transmitted in anywhere it doesnt matter).
Can i use two channel of USRP at the same time to receive a signal ?
I need the original source signal and time-shifted version of this signal.
Many thanks for your help.
Sincerely yours,
Uysal.
Solved!
Go to Solution.

Hello,
I found this forum post which may be helpful to you. It looks like you can't receive from the two antennae in the way that you describe. I think this would require a two USRP setup.
Jon F.
Applications Engineer
National Instruments

I'm new to Mac and the program/all called Numbers. I'm trying to use both Average and small in the same formula. What's I'm trying to do is take 20 cells, find the 10 lowest numbers, then get the average and after that multiply it by .96

I'm new to Mac and the program/all called Numbers. I'm trying to use both Average and small in the same formula. What's I'm trying to do is take 20 cells in a column, find the 10 lowest numbers, then get the average and after that multiply it by .96 I used to use Excel and the formula worked fine in that. Here is my Formula
=(average(small(H201:H220,{1,2,3,4,5,6,7,8,9,10})))*.96
This formula worked in Excel and when I converted my spreadsheet over to Numbers, this formula no longer works.
The best that I have been able to do so far is use small in 10 different cells, then get the average of the 10 cells and finally multiply that average by .96 So instead of using 1 cell, I'm using 12 cells to get my answer.
This is a formula that I will be using all the time. The next cell would be =(average(small(H202:H221,{1,2,3,4,5,6,7,8,9,10})))*.96
Hoping I explain myself well enough and that someone can help me.
Thanks

You can still do it in one cell but it will be more unruly than the Excel array formula.
=average(small(H201:H220,1),small(H201:H220,2),small(H201:H220,3),...,small(H201:H220,10))*0.96
where you would, of course, replace the "..." with the remaining six SMALL functions.

Can I use Time Capsule and LaCie at the same time?

Can I use Time Capsule and LaCie at the same time?

stephaniefromarlington wrote:
Before I answer your questions, let me first just say thank you so much for your amazing patience and helpfulness. Whether or not we get to the bottom of this, I am very, very grateful to you.
We will get to the bottom of it, and you're quite welcome. Don't feel you ought to know all this stuff -- none of us were born with it!
By the way, in answer to your original question, yes, you can use the Time Capsule while backups are running. There's no conflict at all.
1) Estimated size of full backup: 205.94 GB
2) My LaCie has available: 11.04 GB of 359.95 GB
That's part of the problem right there; 360 GB is a bit small to back up 206 GB. Ordinarily, a Time Machine drive should be 2-3 times the size of the data it's backing-up, so Time Machine can keep a reasonable "depth" of old backups for you.
It looks like Time Machine is trying to do a fairly large backup, and there just isn't enough room for it.
But something doesn't quite add up. Time Machine should have deleted all but your most recent backup, trying to make room for the new one. But that would mean there should only be a bit less than 206 GB on the disk, not 360.
A clue may be lurking in your logs. Use the widget in #1 of Time Machine - Troubleshooting to display the backup messages from your logs. Locate the backup in question, then copy and post all the messages here.

Error: A file found in a source-path must have the same package structure

I use Adobe Flex Compiler (mxmlc) Version 4.1.0 build 16032,I have a file,named CustomGraphContainerController.as,it's directory is c:\controllers,and the GCController.as file is under the same directory,CustomGraphContainerController.as file like follows
package controllers{
import ui.GraphControlContainer;
public class CustomGraphContainerController extends GCController {
public function CustomGraphContainerController(a_graphControlContainer:GraphControlContainer) {
super(a_graphControlContainer);
Then I want to use mxmlc command to compile it,like follows:
C:\>mxmlc c:\controllers\CustomGraphContainerController.as
But it raise compile errors,like follows:
Loading configuration file C:\sdk\frameworks\flex-config.xml
C:\controllers\GCController.as: Error: A file found in a source-path must have the same package structure '', as the definition's package, 'controllers'.
I don't know how to compile the as file with package controllers? Where is wrong? How to use mxmlc to compile it?
Thanks

HI,
You should have one main application class to compile this as code to swf.. So that main application path should be in your proper package structure.. then you can compile you app and as files also...
Thanks
Ram..

Using different sources to display on the same indicator

Similar Messages

Maybe you are looking for