Using ditaval files with XML Author

I've been evaluating XML Author and am trying to determine how to use ditaval files with it. If I want to save a ditamap as a book for PDF creation, the Prompt for DitaVal File check box is greyed out. Does anyone know why this might be the case? Is the use of ditavals limited to a full implementation of FrameMaker?
I tried adding PromptForDitaval=1 to the [General] section of the ditafm.ini file to no avail.

Make sure you are using the latest hotfix for Director (11.5.8) - it is the first to support AS# in Flash. Your SWF members will probably need to be linked to their external files instead of fully imported.
Or perhaps you're saying that you've met both these conditions and are still seeing problems?

Similar Messages

HT3775 Using .flv files with iBooks Author

Hi
Does anybody know how to convert .flv files to work within iBooks Author?
Thanks
Julian D

My solution may not be the most technical but it works. We use a combination of iWeb, dreamweaver and straight code on our site. We lay a graphic in where the flash is going to go then we replace the code with the flash player. You have to make sure the flash is in a div and is identified as a object.
http://www.them-us.com/SVint.html
http://www.them-us.com/Reality.html

How to use .keystore file with BEAweb 6?? Help

Hi,
Is there a way to use .keystore file with BEA Weblogic 6 or 6.1 ?
I used keytool to create private key and public key..
I do not know how to tell weblogic 6 to use it....
Can this be done through the GUI or do I have to add something to the .xml
config file for the site?
Thanks,
Rob

"Bobby Digi" <[email protected]> wrote:
Hi,
Is there a way to use .keystore file with BEA Weblogic 6 or 6.1 ?
I used keytool to create private key and public key..
I do not know how to tell weblogic 6 to use it....
Can this be done through the GUI or do I have to add something to the.xml
config file for the site?
Thanks,
Rob
nope. with 7.0 you can do that.
>
>

Using *.so files with eclipse

Hey there
I'm having a little problem compiling an application which uses *.so files with eclipse:
If I run eclipse from the directory in which the *.so files are present, the application will run.
However, if I run eclipse from any other directory , the applicationwon't run, stating that the *.so were not found.
I've placed the path to the directory on my $PATH , and tried to add the following line to the VM variables in the RUN menu:
-Djava.class.path=<directory _name>
but to no avail..
Any ideas?
Thank You!
Message was edited by:
Yossale

I added it to the LD path, but nothing changed.
How can I check if eclispe picked up the change?First check that you can now run your program from any directory and then worry about Eclipse.
Where did you setup the LD_LIBRARY_PATH?

Using Word files with audio on a PC

I was wondering if it were possible for one to use Word files with recorded audio from a Mac on a PC? I'm not sure if it is possible at all, but if somebody knows how to extract the audio, it would be a great help. I used Word 2008 for the Word files.
Thanks

If you don't get an answer here, try the forums devoted entirely to the problems of MS apps:
http://answers.microsoft.com/en-us/mac/forum/macword

How to use XDCAM files with Premier 4 Trial

According to everything I have read, using XDCAM files with Premier 4 is easy. It just works. However, it doesn't with me.
For starters, when I create a new project, there are no XDCAM presets, despite it stating there are in the various documents I have read.
If I either try to import a file directly or copy it to the hard drive and then import it, I get:
Error Message
The importer reported a generic error
Not very helpful.
This is a trial version of Premier to try to establish if this product is any good. I did try to contact Adobe but they say they don't support trial users. Not very helpful. Since Adobe are obviously not very interested in selling their products, is there anyone else out there whop can answer this or should I just use Final Cut Pro instead (well if Adobe are not interested in helping a potential customer, what chance is there of being helpful once they have your money???)

As far as I am concerned, editing XDCAM EX files with CS4 - I have yet to edit XDCAM (HD) files - is as easy as editing DV(CAM) material on my i7 Extreme machine with Vista Ultimate and 12 Gig of RAM.
I am also pleased to report that the audio bug that beset CS3 when editing XDCAM EX files namely, audio cutting out randomly, is a thing of the past.
The whole CS4 Suite (including Premiere) has been running very smoothly on my (beefy) machine.

"Use RAW files with external editor" greyed out for Photoshop CS2?

I've just upgraded from iPhoto 5, and the "Use RAW files with external editor" option in the advanced preferences is greyed out when I select Photoshop CS2 as my external editor (back in the General pane).
It works fine when Preview.app is selected. I can understand that pre-CS2 Photoshop wouldn't be available, but CS2 is capable of editing RAW images.
Has anyone been able to get iPhoto 6 to send a RAW image to Photoshop CS2 using this preference? I've written an Applescript to do it in iPhoto 5, but I'd rather use something cleaner...
15" PowerBook G4 Mac OS X (10.4.4)

Works great with Photoshop Elements, opens with Camera Raw. The issue is you can't save it so that iPhoto gets the changes.
You have to save it and then re-import. I tried all permutations of saving it in originals and modified folders in the library. No luck. The only thing I didn't try is to save it as a jpeg over the top of the full sized one iPhoto created on import.

Bridge opening office files with xml converter

Adobe Bridge CS3 is opening all my excel files with xml converter and promting me to save as. How do I switch it to default to Microsoft Excel when opening these files?

These options are handled in the Bridge prefs under File Associations, but if I remember correctly this is somewhat limited in CS3 since it only handles Adobe files that install their associations. Any other file type is handled by whatever the opoerating system offers. Well, you can always look and give it a try...
Mylenium

How to use "choose file with prompt" command?

I need to use "choose file with prompt" command and I want give user possibility choose ONLY images (jpeg, png, gif). So, I write like this:
choose file with prompt "Please, choose images for processing..." of type {"JPEG Image"}
But this doesn't work! - All files (including jpegs) are dimmed, and user can't choose any....
So, how can I filter JPEGs, PNGs and GIFs?

I have found, that most of images on my computer has missing file_type, I don't know why..... so "type identifier of (info for (choose file))" also doesn't work properly.
The only one way that 100% works is use Uniform Type Identifier (UTI) -- details here: http://www.huw.id.au/code/fileTypeIDs.html
thanks.
iMac G3, PowerBook G3 FW Mac OS X (10.4.5)

Is anybody use Hyper File with LabView?

Is anybody use Hyper File with LabView?
I Have a project that need to conect to a hyper file data base Made by PCsoft.
Thanks
Benoit Séguin
Software Designer

I have never used HyperFile, but a quick check of the company's website indicated that there are ODBC drivers available for it so it should be a simple matter connecting through ADO.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Create offline interactive forms using webdynpro java with XML data source

Hi Gurus,
I am having a scenario like below:
Sales guy request for order list online from portal- Sytem receives the request and creat XML file- from xml file need to create a Offline interactive form-Sales guy fills it offline at customer site- uploads in portal -on submit xml has to be generated with captured data at customer site-Process to ECC.
So my questions are:
How to create the offline interactive form from XML?
Once filled offline interactive form uploaded into portal how to create XML again from pdf ?
Please give some idea on this as this is my first Offline interactive form using XML datasource.
Thanks
Ravi
Edited by: Ravi Sunkara on Jul 27, 2010 5:25 PM

Hi Otto,
Sorry for replying lately. First of all I did not get your suggestions as your are editing the same posting.
Secondly we will be using WDJ. Actually in between SAP Portal and ECC we are having adobe LCES so we need to create Interactive form using XML only. Once it is filled again the form will be submitted to another application which is running on FLEX, which will process the order.
if you can give me your personal id i can send you the detailed process
Thanks
Ravi

Incoming Image file with XML payload processing

Hi,
We have PI 7.1 and the interface is from file to standard RFC scenario with ABAP proxy in ECC.
2 incoming files need to be processed by the interface - xml file with transaction details and the corresponding Image file.
These files have to be mapped to the standard RFC and then pushed into ECC.
Can the Java mapping be used in message mapping to pass the image file in the RFC as I do not want to use the Java module?
If yes, can someone please help with the code and the mapping aspects?
Regards,

Abhishek,
Though I never worked with server proxy with attachments,
In my opinio, when it is possible to send attachments from outbound ABAP proxy, then logically it should be possible to read attachments in the inbound proxies.
I just saw this link in forum,
[Re: Inbound proxy with attachments.|Re: Inbound proxy with attachments.]
Regards,
Praveen Gujjeti.
Edited by: Praveen Gujjeti on Apr 8, 2010 5:25 PM

Using delimited file with xsd

hi:
Please help...
I'm trying to use ALDSP with delimited file as data source. However, I need to specify an element with attributes in the xsd. And I got the following error:
"The validation root element of a Delimited File schema should have a non-mixed complex type whose content model consists of a singleton sequence of simple-typed singleton or optional elements."
Does this mean that I can't have attributes in the xml produced by ALDSP when using delimited file as data source? If it's possible to do this:
delimited data:
year,cust,sale,return
2001,23,5000,200
2002,24,2400,100
produced xml:
<root>
<data year="2001" cust="23" sale="5000" return="200"/>
<data year="2002" cust="24" sale="2400" return="100"/>
</root>
thanks!!

thanks for the help!! I do have another problem using delimited data. Somehow the <?xml version="1.0" encoding="UTF-8"?> line is repeated for every record when I do the testing:
<?xml version="1.0" encoding="UTF-8"?>
<ld:myrow xmlns:ld="ld:delimited">
<year>2001</year>
<cust>23</cust>
<sale>5000</sale>
<return>200</return>
</ld:myrow>
<?xml version="1.0" encoding="UTF-8"?>
<ld:myrow xmlns:ld="ld:delimited">
<year>2002</year>
<cust>24</cust>
<sale>2400</sale>
<return>100</return>
</ld:myrow>
<?xml version="1.0" encoding="UTF-8"?>
<ld:myrow xmlns:ld="ld:delimited">
<year>2003</year>
<cust>25</cust>
<sale>15000</sale>
<return>0</return>
</ld:myrow>
Is there a way to remove the repeated <?xml> tag?
thanks!!

LOAD FILE with xml

HI
I want to load an xml file into a RDBMS table, using sunopsis xml driver.
I try to use an other xml file than the initial that is defined in the driver url.
I cannot run this instruction in a XML treatment before the interface :
LOAD FILE "C:/AXYUS/SURSAUD/entree/sosmed1.xml" WITH DTD "C:/AXYUS/SURSAUD/entree/sosmed.dtd" REPLACE READONLY AUTO_UNLOCK
the file doesn't change at alll and I always load the initial file ( sosmed.xml )
any idea ?

Make sure that you issue your LOAD FILE command
- on the SAME Transaction (0, 1, 2, etc...) than the one used in the LKM,
- with the SAME logical schema as the source table logical schema
- and with the SAME Context (if you use the execution context - leave it unset).
This should do the trick, and the connection created in the procedure will be reused in the interface, provided that you chain both in a package.
Regards,
-FX

Oraclexe and loading file with .xml suffix

Using the Oraclexe utility to load an xml file it errors with xml error load, and that is all. I created a table (create table xmload of xmltype). Here is a snippet of the xml content. What needs to be done to "get there from here".
<Response RequestID="1000000080000" Client="PERMS" RequestStatus="Passed" SessionAuthToken="sessionAuthToken" TimeSlot="09:20:00 18:00:00">
<Soldier Status="Passed" NumberOfDocuments="53">
<SSN>123456789</SSN>
<SoldierName>Doe Jonnie</SoldierName>
<Site>M</Site>
<Document DocStatus="Passed" Pages="1">
<DocType>CRS RES/NR</DocType>
<DocDescription>COURSE COMPLETION CERTIFICATE (RESIDENT OR NONRESIDENT)</DocDescription>
<SID>G</SID>
<EffDate>2002/03/15</EffDate>
<AcceptDate>2002/04/29</AcceptDate>
<DocumentID>
<ScanSite>S</ScanSite>
<DocID>202804760</DocID>
</DocumentID>
</Document>
<Document DocStatus="Passed" Pages="2">
<DocType>679DA</DocType>
<DocDescription>US ARMY OFFICER EVALUATION REPORT</DocDescription>
<SID>A</SID>
<EffDate>2002/04/30</EffDate>
<AcceptDate>2002/09/14</AcceptDate>
<DocumentID>
<ScanSite>S</ScanSite>
<DocID>202932534</DocID>
</DocumentID>
</Document>
<Document DocStatus="Passed" Pages="1">
<DocType>CRS RES/NR</DocType>
<DocDescription>COURSE COMPLETION CERTIFICATE (RESIDENT OR NONRESIDENT)</DocDescription>
<SID>G</SID>
<EffDate>2000/04/14</EffDate>
<AcceptDate>2000/07/01</AcceptDate>
<DocumentID>
<ScanSite>S</ScanSite>
<DocID>202074950</DocID>
</DocumentID>
</Document>
</Document>
<Document DocStatus="Passed" Pages="2">
<DocType>679DA</DocType>
<DocDescription>US ARMY OFFICER EVALUATION REPORT</DocDescription>
<SID>A</SID>
<EffDate>1999/04/04</EffDate>
<AcceptDate>1999/07/26</AcceptDate>
<DocumentID>
<ScanSite>S</ScanSite>
<DocID>201773383</DocID>
</DocumentID>
</Document>
</Soldier>
</Response>

For those who are interested, the problem come from the differents drivers used for files :
In Sunopsis, by default :
-     driver :     com.sunopsis.jdbc.driver.FileDriver
-     url jdbc :      jdbc:snps:file
In ODI
-     driver :      com.sunopsis.jdbc.driver.file.FileDriver
-     url jdbc :      jdbc:snps:dbfile
Problem solved.

Using ditaval files with XML Author

Similar Messages

Maybe you are looking for