Using ESS with Portal 7.0 and backend ECC 5.0. Why not?

Hi,
I have this landscape:
server A: Portal 7.0 in WAS 7.0 (2004s) with BP ESS and XSS components
server B: backend ECC 5.0 with EA-HR SP38.
But I am having problems to run some ESS webdynpro iViews (specially personnel info);
According this note: 1007341; this landscape is not supported because is necessary use a separate instance of WAS 6.40 in order to run XSS components.
Why??? Which is the technical reason that I cannot use the j2ee stack from EP 7.0? SAP information about this is so confusing.
if this is impossible to realize, I can use this alternative?:
server A: Portal 7.0 in WAS 7.0 (2004s) with BP ESS
server B: backend ECC 5.0 with EA-HR SP38 and XSS componentes (dual mode stack abap and java both of them 6.40)
As per note 1007341, I need use a third server or I am confusing?. Already having a server which runs E¨P frontend, and other server where it runs the ECC, technically I am not understanding why I need a third server with a older java version than I have in frontend.
This is not supported by a specifically problem? Or can I do if I have a problem and I can fix it with some patch?
Anybody has experiencie using this scheme: Portal 7.0 agains ECC 5.0 for use BP ESS/MSS?
any suggestion will be welcome,
thanks in advance,
regards,
Leandro.

Ok, its true.
My intention is to confirm if is possible install a Java instance in the same server that ECC is running with Abap instance.
My confusion is because note 1007341, in "deviations" part, says:
ECC 5.0 (ERP 2004 back-end system),
XSS 500 on a separate J2EE 6.40, EP NW04s
with business packages ESS and MSS (SAP ERP 2004).
The SAP system only supports this system landscape
if you have installed XSS 500 on a separate J2EE 6.40.
Then, would I install abap stack, and java stack as separate instances (not add-in!) ? and this landscape is supported acordding this note?
(in the example, A and C are in the same server)
thanks in advance!
regards,
Edited by: Leandro Balboni on Aug 12, 2008 5:28 PM

Similar Messages

Using log4j with portal server

Hi,
I am trying to use log4j with Portal server 6.1 using log taglibs from jakarta.
Here is what i've done:
1. copy taglibs-log.jar in /etc/opt/SUNWps/desktop/classes
2. copy taglibs-log.tld in /etc/opt/SUNWps/desktop/default/tld
3. put log statements in JSPs
for example:
<log:debug>This is body content.</log:debug>
<log:debug message="This is attribute content." />
4. /etc/opt/SUNWps/desktop/classes/log4j.properties contains
=========================================
# Sample properties to initialise log4j
log4j.rootCategory=debug, stdout, R
#log4j.rootCategory=debug, stdout
log4j.appender.stdout=org.apache.log4j.ConsoleAppender
log4j.appender.stdout.layout=org.apache.log4j.PatternLayout
# Pattern to output the caller's file name and line number.
log4j.appender.stdout.layout.ConversionPattern=%5p [%t] (%F:%L) - %m%n
log4j.appender.R=org.apache.log4j.RollingFileAppender
log4j.appender.R.File=logtags.log
log4j.appender.R.MaxFileSize=100KB
# Keep one backup file
log4j.appender.R.MaxBackupIndex=2
log4j.appender.R.layout=org.apache.log4j.PatternLayout
log4j.appender.R.layout.ConversionPattern=%p %t %c - %m%n
===============================================
However no log file is created on my system. I am very new to this and would appreciate if anyone could tell me what more needs to be done to get log records in a file.
Thanks for all your help.
Kind regards,
Apoorv

Hi,
I am trying to use log4j with Portal server 6.1 using
log taglibs from jakarta.
Here is what i've done:
1. copy taglibs-log.jar in
/etc/opt/SUNWps/desktop/classes
2. copy taglibs-log.tld in
/etc/opt/SUNWps/desktop/default/tld
3. put log statements in JSPs
for example:
<log:debug>This is body content.</log:debug>
<log:debug message="This is attribute content." />
4. /etc/opt/SUNWps/desktop/classes/log4j.properties
contains
=========================================
# Sample properties to initialise log4j
log4j.rootCategory=debug, stdout, R
#log4j.rootCategory=debug, stdout
log4j.appender.stdout=org.apache.log4j.ConsoleAppender
log4j.appender.stdout.layout=org.apache.log4j.PatternL
ayout
# Pattern to output the caller's file name and line
number.
log4j.appender.stdout.layout.ConversionPattern=%5p
[%t] (%F:%L) - %m%n
log4j.appender.R=org.apache.log4j.RollingFileAppender
log4j.appender.R.File=logtags.log
log4j.appender.R.MaxFileSize=100KB
# Keep one backup file
log4j.appender.R.MaxBackupIndex=2
log4j.appender.R.layout=org.apache.log4j.PatternLayout
log4j.appender.R.layout.ConversionPattern=%p %t %c -
%m%n
===============================================
However no log file is created on my system. I am
very new to this and would appreciate if anyone could
tell me what more needs to be done to get log records
in a file.
Thanks for all your help.
Kind regards,
Apoorv

HT2506 I'm using Preview with a MacBook Pro and MacOS 10.6.8. When adjusting sharpness in the Adjust Colour tool, images are not saved. Any hint? Thanks.

I'm using Preview with a MacBook Pro and MacOS 10.6.8. When adjusting sharpness in the Adjust Colour tool, images are not saved. Any hint? Thanks.

I too experienced the same issue. Here are my details:
Recently I bought a 15” Macbook Pro and last night I tried to connect and use a Edirol FA/66 Firewire 400 connected outboard audio interface using a Firewire 400 to 800 adapter then connected to a Firewire 800 to Thunderbolt adapter since the MBP doesn’t have a native Firewire port. What I observed is that the Edirol was not getting power from the bus nor did the MBP (running Yosemite) recognize the Edriol. At first I thought there was a problem with the Edirol since I haven’t used it in a while but when I connected it to an older MBP that has a native Firewire port, it worked normally. Is there a known issue with these sorts of external audio interfaces working properly with newer MBP running Yosemite? I’m hoping that a software update will fix this issue.

Using LastPass with Safari 6.0 and Mac OS X 10.7

I am considering using LastPass with Safari 6.0 and Mac OS X10.7. Preliminary due dilligence suggests various problems with loading and running the plugin with Safari 6.0 and Mac OS X which appear to be unresolved. I will greatly appreciate any user experience with LastPass on the current Mac OS and Safari platforms, as well as any suggestions (i.e., "tips") for installing and using the plugin (or another more compatible plugin). Thanks for your consideration.

Found this solution in another thread:
Solution was to stop rapport, quit and restart Safari, turn rapport back on, then quit and restart Safari, all now working.

HT201328 Can I unlock an old, unused iPhone 3GS (to be used overseas with a local simcard) and upload on it data from a newer iPhone 4 on the same MacBook Pro?

Can I unlock an old, unused iPhone 3GS (to be used overseas with a local simcard) and upload on it data from a newer iPhone 4 on the same MacBook Pro?

I got approval to unlock my 3GS from AT&T and in the process of updating the operating system. I am now using a iPhone 4 on my computer. I just want to know the following:
When I backup and restore the 3GS in order to unlock it, will it mess up my existing data backed up from my iPhone 4?
Can I upload data from my newer iPhone 4 onto my 3GS?

I can't set up gmail in my iPad 2. Keep on saying ' can't connect with SSL and ask me whether to connect without using SSL, then I press 'yes' and it said again IMAP is not working and tell me to see network connection and incoming mail server.

I can't set up gmail in my iPad 2. Keep on saying ' can't connect with SSL and ask me whether to connect without using SSL, then I press 'yes' and it said again IMAP is not working and tell me to see network connection and incoming mail server. No idea how to do anymore. Already tried to figure out. But not work. Can anyone pls help me?

Nope, doesn't pass verification. I get the spinner for a minute or so, then the alert about setting it up without SSL. Are you suggesting I disable Fetch and Push BEFORE I enter the account details? Because I never get past the account details screen, unless I choose "Set up without SSL" after the warning.

Can I use iCloud with my iPod nano and windows laptop?

not clear how to use iCloud with an iPod Nano and a Win 8.1 PC

iCloud doesn't work with the iPod nano directly, and will only work on a PC with an already-existing iCloud account; these need to be created from a Mac or an iOS device.
(125787)

HT1212 I rest my Ipod with ather computer and then when I would like to use that with my computer it tell me the password it's not correct. can you Help

I rest my Ipod with ather computer and then when I would like to use that with my computer it tell me the password it's not correct. can you Help

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

HT201335 Using mirroring with my apple tv and everthing shows up on the tv untill i try to watch a movie, i get the sound but no picture. I checked and both are on the same wifi?

Using mirroring with my apple tv and everthing shows up on the tv untill i try to watch a movie, i get the sound but no picture. I checked and both are on the same wifi?

I had this problem also. Several times in fact. And it has not been any relation with sw update (Apple TV). I managed to fix this on a strange way. I drop off WiFi in iMac and joined back. Right after thatI tried to adjust Airplay settings, but I didn't manage. Reason was that my iMac didn't found any Airplay devices (?). After about 2-3 minutes iMac recognized my Apple TV. And also audio "posting" to Apple TV started to work.
So restart your WiFi connection on your iMac or MacBook Pro - it may help.
Another hint is to use command: "sudo killall coreaudiod". More information about that: http://wwwx.cs.unc.edu/~cquammen/wp/2011/02/18/resetting-audio-on-mac-os-x/
I have not tried this, but maybe next time
Br
Mikko R

I just bought a used computer with OSX 10.8 and want to reinstall OSX 10.6.3 Snow Leopard . . . How can I do this?

I just bought a used computer with OSX 10.8 and want to reinstall OSX 10.6.3 Snow Leopard . . . How can I do this?

Alfi94965 wrote:
I just bought a used computer with OSX 10.8 and want to reinstall OSX 10.6.3 Snow Leopard
First off you need to know the model identifier of the machine, not all Mac's can be reverted to Snow Leopard and not all Mac's can use the 10.6.3 Retail disk!
To find the model identifier, boot the machine up and hold the command key and the spacebar, Spotlight appears at the top right corner and type in System Profiler and press Enter/Return.
The model identifier should be something like "MacBook Pro 9,2" or something of that nature.
You also can hold D while the computer is booting on/near a Internet connection for a long time and this loads Hardware Test, which one of the panes will give the required information.
Next you download MacTracker here and look up your machine and it's original operating system.
(Don't click the AppStore version obviously)
http://mactracker.ca/
You may have to right or control click on the program to bypass Apple's Gatekeeper and run the program.
If you have the model identifier and the machine won't boot, then just ask here and we can tell you the information
Now all Intel Mac's issued before July 2011 can install Snow Leopard, but the Mac's released after July 2011 came with OS X 10.7 Lion and the firmware won't boot off the Snow Leopard disk. (however 10.6 can be shoehorned on using Firewire Target Disk Mode and another Mac for some models after July 2011)
Also the 10.6.3 Snow Leopard Retail Disk sold at Apple only works on Mac's that came with 10.4-10.6.2 from the factory.
Any Mac's that originally came with 10.6.3-10.6.8 from the factory need model specific disks from Apple directly, not sold at their online store, you will have to call them with your Mac's serial number and order these disks.
If you get the right disk and have the right machine, then you should be able to insert the disk and hold c down or the option/alt key and boot from the 10.6 disk.
Follow these directions and make sure to erase the ENTIRE DRIVE first in Disk Utility or you will have issues later trying to fix it from the disk.
How to erase and install Snow Leopard 10.6

IPod updates 2 touch with the new software, and from the update they are not connected with Time phase. They appear calling but never they enter the calls. I make calls with other users and if one connects but in these two not from the update

iPod updates 2 touch with the new software, and from the update they are not connected with Time phase. They appear calling but never they enter the calls. I make calls with other users and if one connects but in these two not from the update

I use Firefox 95% of the time, and there's no problem with flash content (and I'm still at .55 - downloaded .64 last week but I haven't got round to making the change yet). At the rate they've been changing it recently it may well be out of date already .
I've been trying it in Safari, too with no problems apart from You Tube, but that's because I'm blocking Google cookies.
One thought does occur - if your Flash preferences are set to block all Local Storage, it may be that the problem site is trying to use Flash cookies (LSOs). I had this problem recently with the BBC iPlayer streaming content. Little Snitch notified an attempt to connect to a new URL - emp.bbci.co.uk.
If I disallowed it, no streaming; when I allowed the connection, it still wouldn't stream, so I did a bit of digging and came to the conclusion that it was trying to set a Flash cookie. When I unblocked, lo and behold - streaming resumed as normal.
I now have LSOs blocked in a more subtle way that lets the site think it's being set (but it ain't) and the streaming still works.
As for permissions repair - always repair from local; the permissions on the original disc will have been superceded by updates and new installations of Apple software.
DU needs to be reading the packages on the HD, not the (now out of date) install disc.
The recurring repair messages are normal and don't mean anything's wrong. As long as the final message is 'repair complete' there's no need to dwell on it.
http://support.apple.com/kb/TS1448 (for Leopard and Snow Leopard - Lion no doubt has it's own set).

When I try to sign in with my Apple ID and password, it says I can not sign in. To check my network connection and try again.

When I try to sign in with my Apple ID and password, it says I can not sign in. To check my network connection and try again.
I am connected to my home wifi network. Why can't I sign in??

Not sure, but iAd Producer probably has nothing to do with this.
Did you try posting in a forum that discusses iPhone, or FaceTime, or networking?
I searched and this looks like the best fit : https://discussions.apple.com/community/iphone/using_iphone
-M

I never had an APPLE ID with this email address and I have no idea why this is this showing to me?

Every time I restore my iPhone from iCloud Backup, this apple id SHOWS UP and asking password. But I never had an APPLE ID with this email address and I have no idea why this is this showing to me? Could anyone help me to remove it from my Applr ID as it seems somehow its linked to my iCloud Backup. Thank you.
<Email Edited By Host>

Hi Ralph,
I have received the iPhone 5s from my carrier EE UK. I never had a second hand device as all my previous iPhones received from my carrier. Every time I restore from iCloud backup, first I enter my Apple ID and Password, then it authenticates and goes through next process and updates iCloud settings, right after initial settings then it displayes enter your password where the Apple ID is the metntioned Apple ID and in the bottom it says "Skip this to go next process" or something. I have to press that everytime to skip it, then restore my backup from iCloud and then when I'm in iPhone home it asks me for the password of that mentoned email. So everytime I change the email address to my Apple ID then enter my password that activates my iCloud services and start downloading all the apps I installed.
Its really weird to be honest and I don't know how to remove that email address from that process and seems its there.
N.B. When I had iPhone 4s, Apple Store did replace my iPhone 4s with a new one due to the faulty WiFi.

I ve updated my i pod touch to version 6.0.1. Installation got failed with some error msg, and now my i pod is not getting detedted in my system.Help me to fix it up.

i ve updated my i pod touch to version 6.0.1. Installation got failed with some error msg, and now my i pod is not getting detedted in my system.Help me to fix it up.

What's the error mesage?

Hi, Trying to log in with my user id and password at iocbc but was not able to access. Problem message shown : Applet not initialised or may not be supported. Please refresh the page or check the browser setting Anyone can advise? or i need to download?

Hi,
i have the same problem?
Trying to log in with my user id and password at iocbc but was not able to access.
Problem message shown : Applet not initialised or may not be supported. Please refresh the page or check the browser setting
Anyone can advise?

You need to install Java for your Mac OS version, and/or make sure it's enabled in the Java Preferences application and your browser's preferences.

Using ESS with Portal 7.0 and backend ECC 5.0. Why not?

Similar Messages

Maybe you are looking for