Using 'Expression' in Requested Start Does not work

I need a workflow to send an email 90 days before a Qualifications End Date.  Using BUS7019 with 90- Days in the Requested Start, the date populates perfectly.  I look at the work item and the Requested Start deadline looks good.  However, the date comes and goes and the work item continues to wait.  During testing I was using a container item to set the time as well.  At first I thought that might be the problem.  So I tried it without a time, which sets it to 00:00:01.  So I started the worflow and waited until the next day.  Current date 09/16/09 09:00:00, work item with Requested Start 09/16/09 00:00:01 and it is still in Wait status.  If I set the Latest Start, the work item fires off immediately, so I know the workflow itself works.
I checked SWAA and it is set to check every 3 min.  I ran SWU_OBUF just to be safe.
In the past I have used "work item creation" to set the date and have not had a problem.  I recall someone telling me that there is a bug when using "Expressions".  Is this true or am I missing something?  Is there an OSS note for this?

go to the workflow log of the workitem, click extras-->technical data and then the tab Deadline Data.
Make sure that this information is there.
If it isn't then you need to make sure that the expression has the correct time data and correct format.
If this is there, then check in the job logs if the deadline monitoring job is working correctly.
If this is also working, you should search OSS for a solution or create a new message when you don't find any.
Kind regards, Rob Dielemans

Similar Messages

  • Use member on data form does not work

    Hello,
    "Use member on data" option does not work on composite Data Form. Business rule associated with composite form.
    Who is resolve this problem?
    Version hyperion: 11.1.2
    Thanks

    I don't have a solution for you but more steps to solve the problem
    You are ultimately on the right track in some ways but break it down into it's components.
    The problem could like in the business rule, the form connection, the variables, even the order of operations could all be in play.
    So I would strip this baby down to its bare bones then build it back up.
    1) Run the business rule. Each one separately and only after the previous ones is complete without variables and without touching the form
    Is it successful: go to 2
    If it isn't successful: trouble shoot the calc and or try running in EAS natively to see if that gives you ideas
    2) Run the calc outside the form but with variables included. Did it prompt you correctly.
    Is it successful: go to 3
    If it isn't. What is wrong with the variable
    3) Now attach it to the form but don't hide the prompts
    Still good go to 4
    4) hide the prompts and run on save
    And if it fails on step four then it's not picking up the right variables in the prompt. And you need to look at why it wouldn't grab the right item.
    This will isolate your problem for you and give you steps to fix it. Ultimately 99% of the time something did change in the structure for example that is impacting the calc. And when you isolate the problem this will reveal itself quite quickly.

  • Process chain - After error ABAP - trigger a metachain start does not work.

    Hi,
    I have a process chain, where after an ABAP runs into red (ERROR MESSAGE triggered), another process type, like start a new meta-chain, or start an infopackage starts.... But is does not work. After i go to logs, it asks me whether i want to trigger the following jobs, if i choose yes, it works. But i need to start it automatically, when the ABAP Routine has an error message (RED) in the chain.
    Any idea, because I tried to solve it all the day, but i did not manage to get itwork...
    Many Thanks,
    L.

    Hi,
    the problem is not the ABAP Program.
    I have the following situation:
    A Metachain contains as second step a call of local chain. After the local chain, according to the status of it (green o red), we have other different steps. So we have two different link (red and green) starting from the local process chain step.
    Inside the local process chain there is the ABAP program that check several parameters and if something is not as expected fails with status red. if this situation happens, the local process chain becomes red and in SM37 inside the job i see the error that i forced, but the status is not triggered to the first metachain , so the corresponding following steps are not triggered.
    This issue happens only if fails the ABAP program because, for example, a Infopackages loading fails every thing works and the corresponding steps in the metachain are executed.
    In the ABAP program in order to force the status red we have the following code:
    MESSAGE e162(00) WITH 'Status' 'Red'.
    Any idea?
    Thanks,
    Veronica

  • HT5559 Java web start does not work

    I have followed the instructions in this article, including the last step about web start, but it still does not work, neither applets or web start. When I try to launch a JWS application by double clicking it I get the dreaded warning dialog:
    To open this Web Start application, you need to download the Java Runtime Environment.
    Click “More Info…” to visit the website for the Java Runtime Environment.
    I do have a JRE installed, 1.6, since I for compatibility reasons can't upgrade.
    Trying to launch a web start application from the commandline looks like this:
    $ javaws /tmp/airview.jnlp
    Java Web Start splash screen process exiting ...
    Can not find message file: No such file or directory
    Regular Java-programs work fine.
    $ java -version
    java version "1.6.0_37"
    Java(TM) SE Runtime Environment (build 1.6.0_37-b06-434-11M3909)
    Java HotSpot(TM) 64-Bit Server VM (build 20.12-b01-434, mixed mode)

    Read this thread https://discussions.apple.com/thread/4789691?tstart=0
    This fixed the issue for me:
    sudo /usr/libexec/PlistBuddy -c "Delete :JavaWebComponentVersionMinimum" /System/Library/CoreServices/CoreTypes.bundle/Contents/Resources/XProtect.meta. plist
    In the comments to the linked article someone suggests to comment out the node in stead of deleting it. Probably safer (it's explained further down how to do that). Anyway I already spent to much time on this nonsense, deleted it and it worked, so I'm happy.

  • My Ipad indicates that it should save my data over the last 2 weeks. A message tells me to connect the Ipad to wifi to enable this saving, however although I did as requested, it does not work and I cannot get rid of that message and I am blocked. Many th

    My Ipad is blocked with a message indicating that my data of the last 2 weeks were not saved, and to allow such saving I need to connect the ipad to a wifi. I did so but it does not work. What should I do? Many thanks for your help

    I unblocked my ipad thanks to the solution offered by spritof.
    Many thanks

  • Downgrade using Snow Leopard install DVD does not work on iMac 27"

    I have an iMac 27" (SMC version 1.54f36) that I wish to downgrade. I bought a 5-user Snow Leopard license. Now I'm trying to re-install from the DVD, but the computer won't boot on the DVD.
    If I run the installer from the desktop, the installation starts, but when the computer reboots, it gets stuck. No alterations is done on the system disk, so I can hold down the Alt key and choose to boot from the system disk and I'm still on 10.6.5. For the moment I cannot find the discs supplied with the iMac, but surely the SL install DVD should work?? I've used it once before to do a clean SL install (I believe the iMac I have came with Leopard).
    The version on the SL install DVD is 10.6 (2Z691-6558-A)
    The reason for downgrading is that my Pro Apps (DVDSP and FCP) got a bit shaky when I updated to 10.6.5.

    If you have a 27" iMac, it had to ship with Snow Leopard installed. See Mac OS X versions (builds) included with Intel-based Macs to confirm this, & Don't install a version of Mac OS X earlier than what came with your Mac for why you should not try to downgrade to an earlier version.
    If the version on your SL install DVD is 10.6, then it is an early version & will not work with your iMac. The current retail product version installs 10.6.4 & should work if your iMac is the "Late 2009" model. It probably will not work if your iMac is the "Mid 2010" model.
    You need your grey system discs. They should be kept accessible wherever you use your iMac. If you have lost them, contact Apple about getting a replacement set.

  • Auto start does not work

    Hello,
    I have a macbook pro mid 2011 connected to a thunderbolt 27' display (and getting power from it) through the thunderbolt cable.
    When I select "auto start" at let's say 07:00am in the settings the computer does not start.... what am I doing wrong ?
    thank you
    Greg

    Hello,
    I have a macbook pro mid 2011 connected to a thunderbolt 27' display (and getting power from it) through the thunderbolt cable.
    When I select "auto start" at let's say 07:00am in the settings the computer does not start.... what am I doing wrong ?
    thank you
    Greg

  • Ichat is not working.  tried using port 443 and still does not work

    ichat not working.  tried using port 443 and i stay on for about 45 seconds then it disconnects.  Can you help?

    HI,
    Can you tell me the make and model of your routing device.
    The 10 Second error message is caused by a break in the connection.
    This could be the Wifi being dropped (if you are using WiFi) due to interference from other nearby routers.
    It can be dues to setting or features of the router and if the experience has changed that could be due to a speed increase in your internet service.
    If you are using Ethernet and having this issue it is much more likely to be a setting/feature issue.
    Examples.
    Netgears.  These have a separate WAN set up page that lists either DoS or SPI as one of the things that can be Enabled or Disabled.
    Linksys.  If your model has a Security tab and this has  Firewall then DoS and SPI are port of this.
    Netopia devices Tend to have a 4 level Firewall which DoS and SPI are part of the two highest settings.
    DoS = Denial Of Service and is a Threshold based "Protection" Feature.
    it judges whether too much data is being sent to you  (it was designed originally to stop people overloading Web Servers (many people, many refreshes).
    iChat can outstrip the setting with most Internet Connections in most part of the world.  (In fact iChat can send more data than most Video Streaming sites)
    One thing you can do that may get around this is to reduce the Bandwidth used in iChat (iChat Menu > Preferences > Video Section > Bandwidth Limit drop down)
    Try 500kbps
    10:07 PM      Wednesday; November 23, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • After downloading the app for my Note 10.1-2014, synced my Desktop bookmarks, I cannot see the 3-bar menu and when I do use my menu button it does not work.

    I have searched all the ways I know about this. I have FF V28 on my PC.
    I downloaded FF v 28.0.1 and I cannot get the 3 bar / dot menu on my Note 10.1-2014 tablet.
    All your support notes describe the possibility of using my Home button, main button and even the back button.
    Still no luck and really want to use it on my tablet.

    Hi rketek1, you may be viewing information about something other than the current release of Firefox for Android.
    When using the Knowledge Base here, if the article title doesn't mention Android, check the "Editing Tools" section in the left sidebar to make sure it specified Firefox for Android and not one of the desktop versions.
    For what it's worth, I have attached screen shots of the "3-dot" menu from a Nexus 5. "Back" is a <s>physical</s> button on the device, so it doesn't appear on the screen ''within Firefox''.

  • 'Using ColdFusion with Flex – sample does not work

    Hi, I am having problems with Tom Jordahl's article on 'Using
    ColdFusion with Flex – Part 1: Creating and running a contact
    manager application' found on link '
    http://www.adobe.com/devnet/flex/articles/coldfusionflex_part1_02.html'
    I do not understand his instruction. In step 4, it states:
    "Copy the channel definition from the example Flex
    configuration files found in resources/config (default location:
    C:\fds2\resources\config\). "
    In that folder, I have the following files:
    data-management-config.xml, messaging-config.xml, proxy-config.xml,
    remoting-config.xml. So which file in this folder am I supposed to
    copy from. And where am I supposed to paste it to? Is it into
    WEB-INF/services-config.xml file ?
    When I ran the test,
    http://localhost:8700/samples/dataservice/cfcontact/contactmgr.mxml,
    I get the following errors:
    4 Errors found.
    Error /dataservice/cfcontact/contactmgr.mxml:31
    Definition samples.contact could not be found.
    30: import mx.rpc.events.*;
    31: import samples.contact.*;
    32:
    I am very new at Flex and trying hard to understand this sw.
    Can someone pse help. Thanks a million.

    What he means is to copy the channel section from the
    C:\fds2\resources\config\services-config.xml file:
    <!-- ColdFusion specific RTMP channel -->
    <channel-definition id="cf-dataservice-rtmp"
    class="mx.messaging.channels.RTMPChannel">
    <endpoint uri="rtmp://{server.name}:2048"
    class="flex.messaging.endpoints.RTMPEndpoint"/>
    <properties>
    <idle-timeout-minutes>20</idle-timeout-minutes>
    <serialization>
    <!-- This must be turned off for any CF channel -->
    <instantiate-types>false</instantiate-types>
    </serialization>
    </properties>
    </channel-definition>
    <!-- ColdFusion specific HTTP channel -->
    <channel-definition id="cf-polling-amf"
    class="mx.messaging.channels.AMFChannel">
    <endpoint
    uri="
    http://{server.name}:{server.port}/{context.root}/messagebroker/cfamfpolling"
    class="flex.messaging.endpoints.AMFEndpoint"/>
    <properties>
    <serialization>
    <!-- This must be turned off for any CF channel -->
    <instantiate-types>false</instantiate-types>
    </serialization>
    <polling-enabled>true</polling-enabled>
    <polling-interval-seconds>8</polling-interval-seconds>
    </properties>
    </channel-definition>
    To the file
    C:\fds2\jrun4\servers\default\samples\WEB-INF\flex\services-config.xml.
    The resources directory contains just templates for
    development, the samples
    directory is a fully-deployed flex app.
    Jorge Hernandez
    "watsonValu" <[email protected]> wrote in
    message
    news:[email protected]...
    > Hi, I am having problems with Tom Jordahl's article on
    'Using ColdFusion
    > with
    > Flex ? Part 1: Creating and running a contact manager
    application' found
    > on
    > link
    > '
    http://www.adobe.com/devnet/flex/articles/coldfusionflex_part1_02.html'
    > I do not understand his instruction. In step 4, it
    states:
    > "Copy the channel definition from the example Flex
    configuration files
    > found
    > in resources/config (default location:
    C:\fds2\resources\config\). "
    > In that folder, I have the following files:
    data-management-config.xml,
    > messaging-config.xml, proxy-config.xml,
    remoting-config.xml. So which file
    > in
    > this folder am I supposed to copy from. And where am I
    supposed to paste
    > it to?
    > Is it into WEB-INF/services-config.xml file ?
    > When I ran the test,
    >
    http://localhost:8700/samples/dataservice/cfcontact/contactmgr.mxml,
    I get
    > the
    > following errors:
    > 4 Errors found.
    > Error /dataservice/cfcontact/contactmgr.mxml:31
    > Definition samples.contact could not be found.
    > 30: import mx.rpc.events.*;
    > 31: import samples.contact.*;
    > 32:
    >
    > I am very new at Flex and trying hard to understand this
    sw. Can someone
    > pse
    > help. Thanks a million.
    >
    >

  • Stopping a running application by using the Lomboz Plug-in does not work

    hi newsgroup,
    I am working with BeaWebLogic Server 8.1 and Eclipse 3.0.1 plus Lomboz 3.0.1.
    Problem: The deployment of web applications using the Lomboz plugin works fine but the undeployment fails.
    Undeployment means stopping an aplication. The undeploy command of Lomboz has no effect on the Bea Server. That means the application is still running.
    What is the problem? Should I add something to the build.xml or undeploy.xml ?
    Thanks for your replies.
    Message was edited by Micha80 at Oct 18, 2004 1:27 AM

    Hello,
    Do you get any errors in your log files when you try to undeploy your app?
    What is the actual command being executed by Lomboz?
    Hoos
    www.orbism.com

  • JDeveloper 11g Using EJB, JPA AND ADF DOES NOT WORK IN VERSION 11.1.1.1.0

    Hi all,
    I'm facing serious problems after the migration from jdev 11.1.1.0 version to new release 11.1.1.1.0, as i published with a sample at
    Problems with create new record o in JDev 11 R1
    is this a big bug in the ide? Should i return to previous version?
    Thanks in advance
    Enrique

    Hi,
    my best recommendation is to work with customer supports in this testcase.
    Frank

  • HT2729 im locked out of my i phone i used the wrong pass word the computer that i used to setup my phone does not work any more, what can i do i am using a computer now but it wont synic my phone

    im locked out of my phone i used the wrong pass word the computer that i used to set it up no longer works

    Hi ,
    I'm sorry you have to put your device in the DFU mode which means that you're gonna lose your data in your phone
    Have you upload something in your cloud ?
    I'm here if you need more help 

  • HT1338 I forgot my administrative password and login. I do not have the CD and every time i try to use single user mode it does not work either.  Is their anything i can do to reset this? I don't care about losing the information.

    Please help me ive been trying to do this all day by googling it and using apple.  HELP PLEASE

    Hello, is it an admin Login, or possibly a Firmware Protection Password???
    Firmware password protection in Mac OS X ...
    http://support.apple.com/kb/HT1352
    It would block usage of all the startup keys, like C, N, T, D, CMD+s, CMD+Option+p+r, CMD +v, Option, and Shift, as well as booting from anything but the Hard Drive.
    Force Removing Password Protection
    1) Add or remove DIMMs to change the total amount of RAM in the computer.
    2) Then, the PRAM must be reset 3 times. (Command + Option + P + R).
    http://www.securemac.com/openfirmwarepasswordprotection.php

  • Request manager does not works

    al enviar un reques en oracle application
    termina en error y en los detalles dice la rutina AFPEOT cannot initialize , review the concurrent manager log file for more detailed information.
    alguien me puede ayudar?

    You may want to check the metalink on recent bug
    Follow the step in Note:186058.1 and see if error resolved otherwise log a tar you may be hitting a bug

Maybe you are looking for