Using graphs, reports from Primavera P6

Primavera has a number of dashboards, graphs and reports that we want to publish on a web-portal. Is there a way to access those objects through a portal?

user3609246 ,
Why not run your Crystal report using exported P6 data? I"m not much help with sql.

Similar Messages

Using Reports from End User Console.

I want to show the reports tab and the sub tabs in the end user console.
I have copied the reports folder into the user folder and have modified the "End User Navigation" form , giving the URL of all the jsps.
By this I can see the reports tab in the End user console, but when I click the tab, it redirects to the Admin console login page, and after logging into Admin console login page only I can navigate the other report sub tabs.
Please let me know if there is any way to use the reports from End user console, without the secondary loging (into Admin console).

Do you have to implement whole report TAB or do you want to run only one report.

SAP Query (SQ01) who and when to use the report

HI Experts!!!
Is there somewhere recorded information: who and when to use the report from SAP Query (SQ01)?
Thanks

Hi
This topic doesn´t belong to the Service Marketplace Area.
regards Martin

Calling a Crystal Report from and Oracle Form6i

I am attempting to call a crystal report from within an oracl form. I would appreciate documentation/suggestions on how to accomplish this task.
Thanks
NBranson

HI Nicole,
I have used crystal reports from oracle forms in one of my project. Send a mail to this address, i ll reply you back with the source code. My email address is [email protected] .
But if you just want to know the steps here it is :
STEPS TO display the Crystal Report in Oracle Forms :
1. Create a new form.
2. Create a control block, name it 'CONTROL'.
3. Create a CONTENT canvas, name it 'REPCAN'.
4. Create an ActiveX control on the canvas, name it 'CrystalReport1'.
5. Create a Image item , name it 'REP'. Make sure that image item overlaps the ActiveX control completely, this image item is used to get the item handle. Enlarge this object such a way that it will fit the window, the report gets displayed in this item so the item size should be adeqately large.
6. Right click on the ActiveX control item, select Insert Object from the menu.
7. From the list select Crystal Reprot Control.
8. Select the Progrm=> Import OLE Library Interface Menu in the form.
9. Select Crystal.CrystalReport from the List, this will list two methods and one Event . The two methods are CrystalCtrl and IRowCursor, the event is CrystalReprotEvent.
10. Select all the three and click on the OK button to accept. This will create the program units.
11. In the When-New-Form-Instance trigger of the form write the following code.
Declare
     charWinHandle varchar2(50);
     numWinHandle Number;
Begin
     Set_Application_Property(Cursor_Style,'BUSY');
     charWinHandle := Get_Item_Property('Control.Rep',Window_Handle);
     numWinHandle := To_Number(charWinHandle);
     :Item('Control.CrystalReport1').OCX.Crystal.CrystalReport.WindowParentHandle := numWinHandle;
     :Item('Control.CrystalReport1').OCX.Crystal.CrystalReport.WindowState := 2;
     :item('CONTROL.CRYSTALREPORT1').OCX.Crystal.CrystalReport.Connect := 'DSN=;UID='||Get_Application_Property(UserName)||';pwd='||Get_Application_Property(password)||';dsq=;';
     Crystal_CrystalCtrl.ReportFileName (:Item('Control.CrystalReport1').interface,'C:\Sample_Rep.Rpt');
     Set_Window_Property(Forms_Mdi_Window,Window_State,Maximize);
     Set_Window_Property('MAIN',Window_State,Maximize);
     :reptitle := 'Report Preview Window';
     numWinHandle := Crystal_CrystalCtrl.PrintReport(:Item('Control.CrystalReport1').interface);
     Set_Application_Property(Cursor_Style,'DEFAULT');
End;
One thing to mark here is the, change the report name and path according to your required file name and path in
Crystal_CrystalCtrl.ReportFileName (:Item('Control.CrystalReport1').interface,'C:\Sample_Rep.Rpt');
12. If you want to run multiple reports then create a parameter and pass the file name to the form through the parameter. In the above line of code, you can replace the file name with parameter, so each time the form is called with different parameter with the file name , it displays different reports.
13 Run the Form.

Rwbld60.exe error while calling a graph wizard from reports 6i.

Hi,
I have a latest patch 4f installed on my machine for reports 6i. When i call a graph wizard from my reports i am getting a program error saying "rwbld60.exe has generated errors".
How do i confirm that my new patch is installed successfully.
Thanks in adv.
Shailesh

I'm getting this also. I thought it was
due to my use of DATA PARAMETER. I've
logged TARS on this and have yet to hear
back from Oracle.
Maybe if enough of us get the error Oracle
will give some guidance on this one.

Using graphs in Reports

I have a requirement to display up to 7 different graphs on a single page. The data comes from Oracle Applications 11i. Thinking of using Oracle Reports to create this and embed charts within it.
Would like to hear users' experiences using Oracle Graphics/Chart-wizard and Reports.
Thanks,
- NR

Hi Ram,
how can I draw a curve instead of line?I have posted a Q in BI Beans Forum for you, we should get an answer there:
Curved Line Graph?
10g reports charts wizard. It has only limited number of Graph types when compared to the Graphics builderThat may not be exactly true.
10g Graph Wizard supports 11 major graph types, and 47 sub-types
While 6i Graphics Builder supported 5 major graph types and 35 graph sub-types
There are differences between 6i Graphics and 10g Graph Wizard, so certain things you might have been able to do in 6i may not be entirely possible in 10g. However, the main advantages of the 10g Graph option are - it internally uses BI Beans, which is used in ALL Oracle poducts like JDeveloper, Discoverer, Oracle Apps etc. So the customer gets a consistent look-and-feel. And that it is possible to define your Graph in XML format (and through Java API in JDeveloper).
We have published a list of FAQ's on OTN where you should get answers to at least some of your Q's:
http://otn.oracle.com/products/reports/index.html (click on Graphing FAQ)
Is there anyway that I can add my own attributes in the graph.xml and register in the reports?This will not be possible, however, you should take a look at the complete list of elements and their attributes that is exposed in Graph.dtd - you can then choose the attributes you want, and add them to your Report's Graph.xml:
http://otn.oracle.com/products/reports/htdocs/getstart/whitepapers/graphdtd/graph_dtd_technote_2.html
Navneet.

Excel Graphs using Office Report Generation

I'm using Office Report Generation and I would like to add a grpah to my excel spreadsheet using existing excel spread sheet data.
Right now the only way I can add a grpah is to load the data into labview and create a graph in a 2d array. However that way the graph has no linkage to the data in the exc el spreadsheet. I can't use a template to create the graph then load the data because different results require different methods. However if I could modify an existing graph within labview I could use the template but I can't index a now labview created graph.
Can anyone suggest anything?

Hello,
Thanks for posting to the NI Discussion Forums! I think you might
be right, and there might not be a conventional way to create your
graph from the Report Toolkit (after all this is designed more to
create a report from known and unchanging data that you can move to
excel for demo purposes). There might be some other ways to do
this.
My first recommendation if you would like to stick with the Report Gen.
VIs, you can design an Excel Macro to generate a graph from the
spreadsheet. LabVIEW can execute the Excel Macro through the
Report VIs (see the Report Generation->Excel Specific->Excel
Advanced->Excel Macros palette). There are some good examples
and documentation out there about calling Excel Macros:
http://venus.ni.com/stage/we/niepd_web_display.DISPLAY_EPD4?p_answer=&p_guid=B45EACE3DD2F56A4E034080020E74861&p_node=DZ53040&p_rank=&p_source=Internal&p_submitted=N
http://venus.ni.com/stage/we/niepd_web_display.DISPLAY_EPD4?p_answer=&p_guid=B45EACE3D9D856A4E034080020E74861&p_node=DZ53003&p_rank=&p_source=Internal&p_submitted=N
http://venus.ni.com/stage/we/niepd_web_display.DISPLAY_EPD4?p_answer=&p_guid=B45EACE3DC6D56A4E034080020E74861&p_node=DZ53003&p_rank=&p_source=Internal&p_submitted=N
http://zone.ni.com/reference/en-XX/manuals/323805A-01/RepGenUG_07/
If you do not want to use the macros, you might have more luck using
ActiveX, or other means in which to interface with Excel than are
provided in the Report Generation Toolkit. There are countless
examples and discussions about Excel, LabVIEW and ActiveX so I won't
spend too much time here on it, but if you think you might want to use
this as an option, let us know and I can see about finding some
examples on it for you.
Hopefully this helps! Please let us know how things go.
Travis M
LabVIEW R&D
National Instruments

Error from reports from ZAM(Graph or PDF) - File does not begin with '%PDF-'.

I just noticed today that any Graph or PDF report I try to view I get the
following error - Error from reports from ZAM - File does not begin with
'%PDF-'. I tried to just save the file and then open it, but get the same
error. I can open other pdf files I have downloaded from other sites ok.
Anyone have any idea? I haven't done anything to that server that I am
aware of in quite a while.
Thanks
Bill

I took a closer look at the files it downloaded, opened them with notepad,
haer is what it says:
XSL Transform or subsequent processing failedThe document has no pages.
"Bill" <[email protected]> wrote in message
news:2bBtk.2164$[email protected]..
>I just noticed today that any Graph or PDF report I try to view I get the
>following error - Error from reports from ZAM - File does not begin with
>'%PDF-'. I tried to just save the file and then open it, but get the same
>error. I can open other pdf files I have downloaded from other sites ok.
>Anyone have any idea? I haven't done anything to that server that I am
>aware of in quite a while.
>
> Thanks
>
> Bill
>

Display reports from BW using WAD on blackberry

Hi All,
I have to display reports from BW using WAD on blackberry
can any one please guide me how to do it?
awaiting Reply
Thanks & Regards
Prasad

you have to integrate SAP Mobile infrastrcture with BW system to achive this.

Need Help to develop a Funnel Graph Report using Multiple Subject Areas.

Hi Everybody,
Did any body developed Funnel based graph report in Answers..
Scenario: I need to develop a report which is based on 4 Facts(4 Subject Areas) Report is sectioned with 4 block one blovk with one Fact Metrics like this four blocks.
If any idea on such scenario it will be huge benefit for me.
Thanks in advance.
Thanks,
Govardhana

Yes, i can see datatype and number of columns is same in both queries.
i have challanges to copy message but Error message seems to general. Error says (near to FROM) and I checked there are three FROM in query and all seems to be ok
Query is something like as below
select SA1.col1 saw_0,
SA1.col2 saw_1,
SA2.col1 saw_2,
SA2.col2 saw_3,
FROM
(select col1 saw_0, col2 saw_1 from "subject area1") SA1
FULL OUTER JOIN
(select col1 saw_0, col2 saw_1 from "subject area2") SA2
ON SA1.col1 = SA2.col1
I can't see any issue in the query...please comment.

Calling XML Publisher Report from OAF using the conc programs xml output

Hi all
I am trying to call a report from oa Framework. I have developed the Template in the Ms-Word and for Generating the xml data i used the view object defined in OAF, this approach is working for me...i used the following code to do this in the AM as mentioned in many places...
public XMLNode getEmpDataXML()
OAViewObject vo = (OAViewObject)findViewObject("EmpVO1");
XMLNode xmlNode = (XMLNode) vo.writeXML(4, XMLInterface.XML_OPT_ALL_ROWS);
return xmlNode;
now i want that instead of the view object i should use the xml generated by the report which is registered as concurrnet program with output as xml.
I am submitting the concurrent program and able to get the request id ...
Now from here what should i do.. please suggest...

Hi,
I am thinking of doing something very similar. What i was planning on doing is submitting the request, and then redirecting the user to the concurrent request page. They can then use the standard functionality to view output and get the xml to use the appropriate template.
i would be interested in how you get the concurrent request id from the submitted job.
Many thanks
Rupesh

Generating a report from RTF template using WSDL from ADF

Hi,
I am a newbie to ADF-BIP integration.
I am using the wsdl http://<<ip>>:<<port>>/xmlpserver/services/PublicReportService?WSDL for generating a report from RTF Template in ADF.
We are using Oracle Business Intelligence Publisher Release 11g (11.1.1) and JDeveloper 11g (11.1.1.5.0).
I have a couple of merge variables in my RTF template and I am passing these variable using Report Request parameters.
below is code I added for creating the report request.
First I created publicReportService using webservice proxy.
    public static ReportRequest getReportRequestFromBIPWithTemplate(String reportFolderOnBIP,
                                                        String reportName,
                                                        String outputFileFormat,
                                                        String template,
                                                        HashMap params) {
      String reportAbsolutePath = reportFolderOnBIP + "/" + reportName + ".xdo";
      ReportRequest repRequest = new ReportRequest();
      System.out.println("report path: " + reportAbsolutePath);
      repRequest.setReportAbsolutePath(reportAbsolutePath);
      repRequest.setAttributeTemplate(template);
      repRequest.setAttributeFormat(outputFileFormat);
      repRequest.setAttributeLocale("en-US");
      repRequest.setSizeOfDataChunkDownload(-1);
      System.out.println(params.size());
      ParamNameValue[] paramNameValue = new ParamNameValue[params.size()];
      ArrayOfParamNameValue arrayOfparamNameValue = new ArrayOfParamNameValue();
      Set set = params.entrySet();
      Iterator iter = set.iterator();
      int i = 0;
      while (iter.hasNext()) {
        Map.Entry me = (Map.Entry)iter.next();
        System.out.println(i + "--->>>" + me.getKey() + " : " + me.getValue());
        paramNameValue[i] = new ParamNameValue();
        paramNameValue.setMultiValuesAllowed(false);
ArrayOfString values = new ArrayOfString();
if (me.getValue() == null) {
values.getItem().add("");
} else {
values.getItem().add((me.getValue()).toString());
paramNameValue[i].setValues(values);
paramNameValue[i].setName((me.getKey()).toString());
arrayOfparamNameValue.getItem().add(paramNameValue[i]);
i++;
repRequest.setParameterNameValues(arrayOfparamNameValue);
return repRequest;
I generated report response bytes using below code
{code:java}
repRes = publicReportService.runReport(repReq,userID,password);
reportStream = repRes.getReportBytes();I could see the generated PDF but the supplied variables are NOT reflected in place of merge variables.
Ex: In template
Welcome, <<merge variable, userName>>
{code}
Generated PDF should have
{code:java}
Welcome, Hello World
{code}
Instead of the above I am getting
{code:java}
Welcome,
{code}
I am looking for a suggestion, Please help me in this regard.
Thanks,
Satya
Edited by: 921138 on May 30, 2012 11:11 PM

Please let me know if any one has update for this.
Thanks in advance,
Satya

Which URL to use to open a financial report from a Task list ?

Hi,
I've got a big issue in Hyperion Planning : I do not know which URL to use to open a financial report from a task list.
If I use the Smartcut (given when you do a right-click on the report, then Properties), a tab is opening (normal behaviour), but another tab is opening under the tab, which is very ugly, and moreover which prevent from using the PDF/HTML display icons !
Is someone know which URL to use to display correctly a financial report when opening it from a task list ?
It's an emergency, please help !
Thanks very much.
Virgile.
PS. : we use Internet Explorer 8 and we use 11.1.2.1 Hyperion Planning version
Edited by: 808808 on Jan 5, 2012 3:41 AM

Hi,
OK, thanks, it almost works !!
I've just a problem. 2 tabs are opening.
One is opening correctly and displays my report. I can display it in PDF/HTML.
But another tab is opening with this message : This window can now be closed since the application has been launched in a separate window. Note: Popup blockers may prevent this application from working properly.
Do you know why this tab is opening ?
Thanks very much for your help.
Virgile.

Migrating a webi report from one environment to another using import wizard

Hi Everyone,
Can anyone please tell me what all access should I have on my ID to be able to migrate a webi report from one environment to another environment(e.g. from development to quality).
Regards,
Neeraj Sharma

Hi,
To use the Import Wizard utility, you basically need Administrator, Full Control to Top-level folder, and "Add objects to the folder" and "Edit objects" for this user on the root folder.
You need the least restrictive role, because you require absolute control for content promotion between 2 entitlement systems.
the webi document is the cherry on-top, you;ll have universes, connections, folders to bring over too.
Regards,
H
p.s. check Note 1450708 - How to restrict access to the Import Wizard from a Business Objects Enterprise system
and
Note 1297121 - What rights needed to use Biar File Extraction for a normal user while using Import Wizard ?

How can I select pages to print from a Word document using the report generation 'print report' vi?

I have researched the knowledge base and found:
Printing A Range of Pages or Number of Copies of a Report Using the Report Generation Toolkit in LabVIEW.
This seems to be from a previous version of LV. I am using LV2010. The instructions given do not match up with the current vi. The information did provide a tip and drilling down into the vi I was able to insert the from/to page numbers at the printout invoke method, however this prevents the print function from working in that it can no longer find the default printer.
The error message is:
Error 1015 occurred at NI_ReportGenerationToolkit.lvlib:Word_Print.vi -> NI_Word.lvclassrint Report.vi ->
error 1015 is: Printer is not responding. Check printer configuration.
Any ideas how I can make the modification to print, for example, pages 24 through 29 out of a 32 page word document?
Thanks,
Chris

Hello, take a look at this article. Unfortunately the Generate Report Get Data to Modify.vi was remove since RGT 1.1.3 release. That being said, we can try to find a workaround. See "Configuring a Printer Through the Windows Dialog in LabVIEW", open the GetPrinterSettings.vi, at the PrinterSettings property node you can select the from/to page. I hope this helps.
Alejandro | Academic Program Engineer | National Instruments

Using graphs, reports from Primavera P6

Similar Messages

Maybe you are looking for