Using HANA as the source

Hello,
We have a scenario which we would like to use SAP HANA as the source system.
will delta mechanism (change log via db trigger) work?
Thanks,
Ky Can

Sure,
this is available for over 3 years, now.
Best,
Tobias

Similar Messages

URL Variables used to set the source property for the VIDEO COMP.

Can you take a url variable and have that variable be the value for the source parameter of the video playback component in flash CS4 or CS5?
Example:
the url with url variable: http://www.mydomain.com/videos/videoplayer.cfm?vplayer=videofile1
the actionscript 3.0
var videoFile:String = [who do I get the url variable's value here?]
myVideoPlayer.source = videoFile +".mp4"
in the end the file that should be playing in the video player is: videofile1.mp4
Thanks.

Either
A) Using ExternalInterface, call a Javascript function that returns window.location.search
B) Use Javascript to create FlashVars from window.location.search

Open Hub: Using Infoset as the source.

I found SAP documentation indicating that an INFOSET can be used as a source to a OPEN HUB. See below.
Structure
The open hub destination contains all the information about a data target: the type of destination, the name of the flat file or database table and its properties, and the field list and its properties.
BI objects such as InfoCubes, DataStore objects, InfoObjects (attributes or texts), and InfoSets can function as open hub data sources. Note that DataSources may not be used as the source.
My question is When creating the Open Hub Destination in the Template section; What Object Type do I select for an INFOSET? I do not see an INFOSET as a choice.
We are BI 7.0 NewtWeaver 2004s.
Thanks for your assistance and expertise.
Den

Sure,
this is available for over 3 years, now.
Best,
Tobias

Clone of auxillary database using rman with the source database unavailable

Hi,
Is it possible to clone a database with just the source database's backup pieces. The source database is currently unavailable. The source database backup was taken through rman - nocatalog mode. We have been provided the backup pieces. Any clues on how to go about it?

NAME TYPE VALUE
db_file_name_convert string /u34/oracle/data/FRD9, +DG_OAP
PST1/OAPPST1/DATAFILE, /u34a/o
racle/data/FRD9, +DG_OAPPST1/O
APPST1/DATAFILE, /u35/oracle/d
ata/FRD9, +DG_OAPPST1/OAPPST1/
DATAFILE, /u36/oracle/data/FRD
9, +DG_OAPPST1/OAPPST1/DATAFIL
E, /u37/oracle/data/FRD9, +DG_
OAPPST1/OAPPST1/DATAFILE, /u38
/oracle/data/FRD9, +DG_OAPPST1
/OAPPST1/DATAFILE, /u39/oracle
NAME TYPE VALUE
/data/FRD9, +DG_OAPPST1/OAPPST
1/DATAFILE, /u40/oracle/data/F
RD9, +DG_OAPPST1/OAPPST1/DATAF
ILE
log_file_name_convert string /u32/oracle/data/FRD9, +DG_
OAPPST1_AUX1/OAPPST1/ONLINELOG
SQL>

How do I create envelopes in Pages using Numbers as the source?

I've done this successfully before back in 2011 when I was sending out Holiday Cards. Now I go in there today looking to use the same envelope template and an updated (not everybody lives in the same location) Numbers spreadsheet and I keep getting..."Please select a numbers document that has one or more named header columns and one or more rows of data". The numbers file has 6 header columns (FN, LN, Address, City, State & Zip) and 77 rows of data. I've tried to recreate the file under a different name, I've deleted and reinserted the header columns, etc and nothing has worked. I'm now at the point where I'm toying with the idea of pulling the plug on the Holiday Card all together unless somebody could save the day. PS...their is a holiday card in it for you
Please help..

Fair enough...it sounds like the Holiday cards will be put on pause until 2014.
On a different note, I'm noticing all sorts of issues with the OS...are you finding that Mavericks is less stable than prior versions of the OS? The entire reason I went away from Windows based PC's was because of the instability of the OS and now I'm finding that the stability of the Apple OS is starting to follow the same path.
Thoughts?

Is it proper to use indexed views as the source of your cubes

I understand that you're supposed to use views as the source of your SSAS cube because it provides a layer of abstraction and allows you to make schema changes without adversely effecting the cube. I also know that when you have users accessing the warehouse
you should use indexed views. However I just ran across this little gem:
"With schema binding, if the base object is bound to another object, you will not be able to modify the base object unless you drop or alter the object to remove the schema binding."
That seems to run contrary to the goal of abstraction, that is, if I'm reading that correctly. What am I missing?

You should use schema bound / indexed views very little. They have high overhead associated with them.
In order to change a base table referenced by a schema bound view, you must drop the view, make the change to the table and recreate the view (and any indexes). Depending on the change to the base table this may or may not have any affect on the view.
This is by design.

Use of SOURCE OF SUPPLY table under the SOURCE OF SUPPLY/SERVICE AGENTS tab

Hi,
We are on SRM 7.1.
Can someone please explain me the use of the SOURCE OF SUPPLY table under the SOURCE OF SUPPLY/SERVICE AGENTS tab in the shopping cart screen?
I can see the following columns in the SOURCE OF SUPPLY table under the SOURCE OF SUPPLY/SERVICE AGENTS tab:
Supplier number
Supplier name
Priority description
Item
Currency
Supplier Product number

Hi,
There are many ways assign a source during shopping cart creation.
1. Free Text Shopping cart
During creation of shopping cart after entering the description ,qty price . go to source of supply tab--enter the source
and save the shopping cart. Once the shopping cart is approved .PO is created for the vendor what you assigned.
2.During the creation of shopping cart using MDM catalog ,the source is assigned in the MDM catalog no need to assign
Once the shopping cart is approved .PO is created for the vendor that is coming from the MDM catalog.
Regards
G.Ganesh Kumar

How to display a message in dashboard when the source is not available

Hi,
I had a requirement to display a custom message in the dashboard instead of showing the default error message like "Client commands are disabled by administrator" when the source is unavailble for the reports. I'm using Essbase as the source and when the cube is loaded, i have to dispaly the custom message and to hide all the reports in the dashboard, any suggestions are highly appreciated and will be highly helpful to me.
Thanks
Ashik

Hi,if i understand your question....
i believe you can manage it in 3 ways.
1.you can make groups in order each one be able to "see" its own report..and so on...
2.In the results section , there is a format other views-->No result, you can try it.
3.There is a configuration in///....\OracleBI\web\msgdb\**your nls**\messages such as commmesages.xml and other , where you can handle your "error" report
http://greekoraclebi.blogspot.com/
///////////////////////////////////////

Open hub destination with datasource as the source

Hi,
I am trying to use the new features of BI for open hub destination where you can use datasource as the source for extraction.
I have created an infopackage, loaded data to PSA and from there to open hub destination via the DTP.
When I try to execute the DTP, I get the following error:
<b>Datapackage processing terminated.
Error in substep
You are not authorized to use this transformation.</b>
I have been able to use the DTP to load open hub destination targets with datastore and infocubes as source.
Also when we turn on the security trace, it doesn't fail anywhere.
Has anybody faced a similar problem?
Any help appreciated,
Thanks,
Payal.

I have created to OHD - one for a 3.5 data source and one for a 7.0 data source (both are different data sources). While creating DTP for the 7.0 data source, it did create a default mapping for transformation.
But I still get same error in both cases.
When I create the DTP, it tries to create a transformation. But I get an information message :
Exception CX_RS_MSG occurred (program: CL_RSBK_PATH==================CP, include: CL_RSBK_PATH==================CM00I, line: 16).
I can still activate the DTP and when I run it says I don't have authorization to this transformation.
I think there are issues while creating the transformation, but I don't know what!
-Payal.

How to determine the source of Events triggered in a process chain

Hi ,
We have almost a 100 process chains, and of these approx 20-30 local process chains are triggered by events raised within other process chains. These events are raised via BP_EVENT_RAISE using the ABAP process type.
However, our problem is to identify the source of these event trigger - i.e. which process chain triggered this event ?
Looking at SM64, the event history does not display the source for these events.
Is there any table or program that we can use to determine the source of these events which are triggered.
Any help is much appreciated and points awarded.
thanks
BK

Hi,
do check in the program /SSA/BWT . or TCODE - ST13 -- enter BW-TOOLS and execute. -- Choose Process chains and execute --- Select the date and time for which you want to see the process chains and execute again.
This will give you the entire list of process chains triggered, status, timings(start, end, overall runtime). Once clicked on the process chains it will show you the steps in theprocess chains, data loaded in the data targets, source system, etc...
hope it helps.

How to change the Source system from ONE DataSource?

Hi,
I'm trying to change a DataSource's source system (active with dtp and transfer rules), but it's not possible to do it in change mode because the field 'Source Sytem' is not enabled. I know I can use the BDLS transaction but I understand that this is for change all Datasources and I only want to change one of all.
Thanks for your help

Hi Marcel,
As I understand apart from file and web services all other data sources are replicated from underlying source system. BDLS transaction is used to change the source system but in case of system copy activity and it is necessary because the data sources points to old source system.
In your case as I understand you will have to replicate the current data source directly from underlying source system and then build the rest of the flow. May I know how you have got this single data source for which the source system is different?
Regards,
Durgesh.

How can I change the source DB?

Hi all,
I have implemented an ETL with OWB where the source DB and the target DB both are Oracle.
Now I have the same source (the same structure, tables, indexes,...) DB in MSSQL. Then my question is: how can I change the connections without modifying the mappings?
I only want to change the source DB in Oracle to the same DB in MSSQL, therefore the mappings that are getting the data from Oracle then will get the data from MSSQL DB. Is it possible? or I have to create new mappings for MSSQL?
Many thanks in advance,
Victor.
p.d. hope my english is understable

Hi
To have one set of mappings that could be switched to point to one system or another would be possible using synonyms to the source, where the synonym could be refined at runtime.
You can have unbound table operators in OWB mappings that would be the name of the source item. It helps to understand a little about how the code generation works in order to do this. If you use a source table T in a schema S1, and the mappings is in schema S2, then the generated code would refer to S1.T and may even have a dblink so S1.T@dblink, an unbound table operator for table T would simply use the name T in the generated code, this lets you define T however you want in the schema where the mapping is deployed to. So T could be a synonym that points to a local Oracle table for example named S3.MYORATAB or it could be a SQLServer table referenced via the database gateway using MYSQLSERVERTAB@mysqlserverinstance
Here is a trick to quickly define an unbound table operator based on the table structure of an existing table. You can quickly create unbound table operators that look like other tables by adding an existing table which you have imported into the map, then add a new table operator and add it unbound with a name. Then map from the bound table operators in/out group to the unbound table operators in/out grp, this will define all of the attributes and datatypes, you can then delete the bound table operator to leave the unbound one.
An alternative would be to copy-paste the mappings and synchronize the source table operators with the SQLServer table definitions.
Cheers
David

Using flickr as the site to load images from?

I am setting up a site that has to give access to a few hundreds of high res images. The site is not on an extremely fast connection, so the solution I have thought of is to upload all my images to flickr and use that as the source for the images.
Each images needs to be seen in a small size directly on the page and clicking on the image should open up the large 5MP image.
I'd lik eto build the site with iWeb as it is easy to build sites with iWeb. So I was wondering, how am I going to do this? I need some sort of flickr widget or some instruction on how to do this.
Any tips?
Thanks

Google : [How to embed flickr in a webpage|http://www.google.com/search?q=embedflickr+inwebsite]
Flickr : [embed flickr in webpage|http://www.flickr.com/search/forum/?q=embedflickr+inwebpage]
Or do this :
1. Display a Flickr album
2. Click Slideshow (upper right hand corner)
3. Click Share (upper righthand corner)
4. Select and copy the code at *Grab the embed HTML*
In iWeb add a HTML Snippet and paste the code from 4.
Publish the page.
And if you're really adventurous, read this : [How to display a remote picture in your iWeb page |http://www.wyodor.net/Tutorials/ImageWidget/ImageWidget.html]
Message was edited by: Wyodor

The Source is protected - HANA Migration

Hello experts...
I have performed a migration from SAP ERP 6 EHP 7 SQL database on HANA database.
Now I have a problem with a client program.
The program can not start(F8) -> Error The Source is protected. But the code can be viewed, but not changed, because there is no license.
But that with the license was before the upgrade too.
What should / can I do so that I can run the program again?
Thank you.
Best regards
niiiick

Migration Assistant in Mavericks is compatible with OS X Snow Leopard v10.6.8 or later. If you are migrating from an earlier version of OS X, update your older computer first, or manually copy your data from one computer to another.
From:
OS X: How to migrate data from another Mac using Mavericks
Thus you need to update to 10.6.8 as already said. Are the two connected via wifi? Try a wired ethernet connection or use FireWire with the old Mac in Target Disk Mode
How to use and troubleshoot FireWire target disk mode

Using a SQL data source and XML data source in the same template

I am trying to develop a template for the Request for Quote report generated in Apps 11.5.10. I have loaded the data from the XML output into the template, but I am missing one field - I need the org_id from the po_headers table. Is it possible to use a sql data source (i.e., "select org_id from po_headers_all where po_header_id = [insert header_id from xml data]...") in addition to the xml data source to populate the template at runtime? When you use the Insert > SQL functionality is it static at the time the template is created, or does it call to the database at runtime? I've looked through all the docs I could find, but this isn't clear.
Thanks for any help or suggestions you may have.
Rhonda

Hi Pablo
Thats a tough one ... if you go custom with a data template you will at least get support on the data template functionality ie you have a problem when you try and build one. You will not get support on the query inside the data template as you might have gotten with the Oracle Report, well you could at least log a bug against development for a bad query.
Eventually that Oracle Report will be converted by development anyway, theres an R12 project going on right now to switch the shipped OReports to data templates. AT this point you'll be fully supported again but:
1. You have to have R12 and
2. You'll need to wait for the patch
On reflection, if you are confident enough in the query then Oracle will support you on its implementation within a data template. Going forward you may be able to swap out your DT and out in the Oracle one without too much effort.
Regards, Tim

Using HANA as the source

Similar Messages

Maybe you are looking for