Using HTC file correctly

hey i recently downloaded a htc file so that i could get rounded corners to work properly in IE. But i now have the file borderradius.htc, i tried putting it in the css folder but that didnt do anything. Anyone know what to do with this?

Since behavior isn't valid CSS code, I prefer to put this inside an IE Conditional Comment.
IE CONDITIONAL COMMENTS go before the closing </HEAD> tag and after all other CSS styles in your HTML document.
Also, I like to keep border-radius.htc file in my Scripts folder. If you put it someplace else, change the path.

If this doesn't help you, we need a link to your test page.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Similar Messages

Currently have 30K pics on PC Win. 7 laptop using PSE 8, corrected issues and did full backup on portable hard drive plus saved (Extensive) Keyword tags to file. Installed PSE 13 on PC Win 8.1 laptop. Will attach same portable Hard drive to new laptop.

Currently have 30K pics on PC Win. 7 laptop using PSE 8, corrected issues and did full backup on portable hard drive plus saved (Extensive) Keyword tags to file. Installed PSE 13 on PC Win 8.1 laptop. Will attach same portable Hard drive to new laptop. How do I import prev Keyword Tags from file and Restore catalog from port. HD to new PC and in what order? I have not opened PSE 13 on new PC yet. Would like to do it right the first time!

No importing needed.
See these instructions: Use Backup, Restore to move catalog | Organizer | Elements 6 or later

Using .htc behaviour file with Business Catalyst server

Hi,
I want to use a .htc behaviour polyfill to add a functionality to old IEs. Is Business Catalyst able to handle that file extension? If not, can I use a .htaccess file with BC to add that extension as mentioned here:
https://github.com/Schepp/box-sizing-polyfill
Regards, Dennis

Some good javascript based sollutions been around for a while and got better and better that achieve all this so always used those but bother less and less now.
If your on Ie7/8 then you get square! your own fault, lol.
Never saw no reason for the htc file not to work but guess its not accepted on the server setup.

Why am I being told that a JPEG file that I made changes to in Photoshop 6 (CS6) can't be saved? The message I get says that either the file is locked and I don't have permission to execute this or another program is using this file.

i recently purchased a 21.5 iMac with Yosemite (10.10.1) and was disappointed to discover that my CS6 programs are not functioning correctly. I am unable to use the "Save As" command when making changes to a JPEG file in Photoshop. The message I get says that either another program is using the file or it is locked and I don't have permission to execute that command. I'm experiencing a similar problem in Bridge when trying to move an unwanted file to the Trash. Again, I get a message telling me that i don't have permission to do this. Lastly, I'm unable to open any Camera Raw files. Any suggestions? I had no problems with the Mavericks OS on my old iMac and although it's much slower, I'm tempted to go back to using my old iMac. At this point, I feel as if I've just wasted $2300+ (tax included).

Back up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
resetp
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

How to use .mod files from a JVC camcorder?

Hi All,
I'm trying to find the proper workflow for using .mod files from a JVC Everio model camcorder. I was able to transfer the files onto my system by simply using the included usb cable from the unit. It simply mounted the camera's flash card on my desktop and I was able to drag all of the files from it.
As others have posted, the .mod files are not accessible using the Import function in FCP. I am able to open them with MPEGStreamClip as other have suggested. My question is, how should the files be converted to use with FCP and/or DVDSP? In MPEGStreamclip the file shows the video stream as: 224 MPEG-2, 720 × 480, 16:9, 29.97 fps, 8.40 Mbps, upper field first. I tried a few of the demux functions. The straight demux to .m2v & .ac3 yields a file that opens in QT, but it shows up as a 640x480 file and is noticably squeezed. Using the demux unscaled yields a file that opens in QT as a 720x480 file and looks somewhat better. And using the demux to headed yields as file that opens in QT as 720x404 and presumably is the correct 16:9 ratio.
Trying to use those same files in DVDSP didn't get me very far. If I create a new HD project in DVDSP I can import the straight demuxed file and the headed file. The unscaled file won't import. If I add the imported files to tracks the straight demuxed one will play in the simulator but the headed one simply shows a green screen.
I'm hoping that since MPEGStreamclip can play the files, its just a question of figuring out the proper export/conversion settings. My end goal is to produce a dvd of the footage (not exactly sure if I should be using an HD project or a SD project set to letterbox). I also need to produce a web-ready version of the footage. I haven't tried this yet but I'm assuming that one of the QT exports from MPEGStreamclip will get this done correctly.
Hopefully someone has a workable solution for these files.
Thanks,
Chris

Hi all,
I looked further on this forum and found others that had the same problem. One suggested connecting the cam corder first, then start iMovie, then wait for a few minutes. I did this and it worked!!!!!
Problem solved.
Thanks.

How to use property file - sql query define in property file

Hi All,
Anybody please tell me how to use property file.
I have placed sql query in propery file and I have to access this in my file.
well so far this is my code but don't know how to implement in the following ...
pstmt = con.prepareStatement("select * from registration where username=?");
instead of writting the query I want to use the property file.
so far I have developed the following code...
FileInputStream fis = new FileInputStream("querysql.property");
Properties dbProp = new Properties();
dbProp.load(fis);is the code correct... or is there another way to access property file
Please help.
please reply soon....
Thanks

Before answering, check if it's already been done here http://www.jguru.com/forums/view.jsp?EID=1304182

How to build shared members using Rules file

hi all,
we have a source file like below,in that Bold members are shared member. we doknow how to modify the source file for building shared members using Rules file.
Conf Total,~,Config A,*Lightbolt 365 A*
Conf Total,~,Config A,*Lightbolt 540 A*
Conf Total,~,Config A,*Lightbolt 730 A*
Conf Total,~,Config A,*Thunderball 365 A*
Conf Total,~,Config A,*Thunderball 270 A*
Conf Total,~,Config A,*Roadranger 123 A*
Can anyone give suggestion to resolve this issue.
Thanks in Advance

hi John,
Here i'm building the dimension through generation build method.
setting the properties as
Field, Dimension, Field Type, Field Number
Field1,Product,Generation,2
Field2,Product,property,2
Field3,Product,Generation,3
Field4,Product,Generation,4
After mapping it shows dimensions are correctly mapped.
When i load the source file and the rule file, it shows error partially loaded data,.And it doesn't shows the shared member property. That is what asked How to modify the source file for building shared members using Rules file.
Thanks,
Edited by: user@99 on 25-May-2010 15:37

How to publish to an FTB server in iWeb 2 using the File ➙ Publish to Folder option??

I was just given the following advice regarding publishing to an FTP other than MobileMe.
Web 08 does not have that feature (drop down menu to publish from "site" icon). You will need to upgrade to iWeb 3 in iLife 11 in order to get that feature. You can get iLife 11 at the online Apple Store while supplies last since iWeb (and iDVD) have been discontinued by Apple
To pubish to an FTB server in iWeb 2 use the File ➙ Publish to Folder menu option and then use a 3rd party FTP client like Cyberduck to upload the site files.
Follon-on question, can anyone provide more details on how to do exactly what was suggested? I toyed with it and can only get it to publish to a folder on my desktop, but not to an external FTP. (I have already purchased a web-host package, just need to publish to it!)

Okay. When you publish your site from iWeb to a local folder what you will get is one site folder - this site folder will have the same name as you gave your site in iWeb and one separate index.html file.
Your site folder contains an index.html file as well as the separate index.html file. You NEED both.
What you need to do is firstly using Cyberduck or whatever, upload your site folder to your host into whatever folder you need to upload to on the server - could be 'public_html', 'htdocs' or whatever - this is your root folder.
You then need to upload your separate index.html file to your server too, but this index file needs to sit outside your site folder because it needs to point in towards the index.html file that is in your site folder - this is the first page of your site.
You don't delete or duplicate any index files - iWeb produces the two index files that you need when you publish to a local folder - one index file in the site folder itself and one separate index file that sits outside the site folder and points into the first page of your site.
Also, remember to call the first page of your site something like Home or Welcome, but DO NOT name it index.
By the looks of things here you have not uploaded your index files correctly.
What I would suggest that you do is start over - so open Cyberduck and connect to your server and go and delete your site folder and your other index file if it is still there.
Go back to iWeb and publish to a local folder again and notice that you have both your site folder and separate index.html file.
Now go and open Cyberduck again and connect to your server and note where you need to upload your files to.
Now go and upload your Site Folder to your server and once this has finished go back and upload your separate index.html file, but this needs to sit outside your site folder. If you do this, then your site should display okay - as long as your other index file is pointing into to the first page of your site it should display correctly.

Error while reading raw file created in previous task using raw file destination

I am reading a flat file and creating an raw file using raw file destination. path of the raw file is in a variable. now I am reading the raw file using the rawfile source component. I am able to execute if the .raw file is available. But
when we deploy into the production the .raw will be created runtime, so the package is getting failed while evualting the variable which hold the path of the variable. since the .raw is not available i am not able to proceed further. it's in ssis 2008
r2
Error at Load Data [Raw File Source [401]]: File "c:\test123.raw" cannot be opened for reading. Error may occur when there are no privileges or the file is not found. Exact cause is reported in previous error message.
Error at Load Data [SSIS.Pipeline]: component "Raw File Source" (401) failed validation and returned error code 0x80004005.
Error at Load Data [SSIS.Pipeline]: One or more component failed validation.
Error at Load Data : There were errors during task validation.

I am also using a raw file destination using a variable.
I have set DelayValidation = true on both the DataFlow task and even the Sequence Container.
I get the same error when I run the entire ssis package, however
when I run the individual container or individual task it runs without an error.
Also, something interesting is the error is not the same path as the variable name.
Warning: The system cannot find the file specified.
Error: File "C:\Users\MyName\AppData\Local\Temp\GUIDNumber\\RawFileName" cannot be opened for reading. Error may occur when there are no privileges or the file is not found. Exact cause is reported in previous error message.
The variable is "C:\Temp\ProjectName\RawFileName"
I have other RawFile sources in this same project, but only this one file is giving me grief.
Any other suggestions? Is this a bug?
Have you set an expression for connection string property of raw file? Is it based on variable/expression or configuration? If yes, check the value of variable/ expression or configuraton item at runtime by putting a breakpoint in the pre execute event of task
and make sure path value its getting is correct. It may be that path is getting a different value at runtime due to expression/configuration set for it.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Unable to deploy a simple servlet using WAR file on Oracle9iAS v9.0.3

Hi All,
I am facing problem while deploying a simple servlet using WAR file on Oracle 9i App Server.
I have installed Oracle9iAS J2EE and Web Cache v9.0.3 on Windows 2000 server.
It includes:
     - Oracle HTTP Server
     - Oracle9iAS Containers for J2EE
     - Oracle9iAS Web Cache
     - Oracle Enterprise Manager
The release of installed Oracle9iAS is Release 2 (9.0.3)
I referred following link to Deploy Applications Using WAR file:
     http://otn.oracle.com/products/ias/daily/sept12.html
As mentioned in this documentation I have followed following steps to deploy WAR file:
1] I have created a war file by name SimpleServlet.war. In SimpleServlet.war, there is a servlet by name Simple which prints time at which servlet was accessed.
2] I have modified <ora9ias_home>\j2ee\home\config\application.xml and added following web module entry:
     <web-module id="SimpleServlet" path="../../home/applications/SimpleServlet.war" />
3] To make this module accessible from over the web, I have modified file
     <ora9ias_home>\j2ee\home\config\default-web-site.xml and added following entry:
     <web-app application="SimpleServlet" name="SimpleServlet" root="/SimpleServlet"/>
4] I saved both the files and started Oracle HTTP Server and accessed page as below:
          http://<server>:7777/SimpleServlet/Simple
where Simple is servlet in SimpleServlet.war file.
In the browser, The page cannot be found is shown to user. I have verified that SimpleServlet.war is extracted to SimpleServlet folder under <ora9ias_home>\j2ee\home\applications folder. I found that Simple.class is stored under WEB-INF/classes folder and web.xml contains correct entry for url pattern for servlet Simple.
What else could be the problem? Am I placing the war file in wrong place or modifying application.xml or default-web-site.xml in a wrong directory?
This is very urgent. Please help me with your valuable comments on this.
Thanks in advance.
Regards,
Sandesh

Hi All,
I am facing problem while deploying a simple servlet
using WAR file on Oracle 9i App Server.
I have installed Oracle9iAS J2EE and Web Cache v9.0.3
on Windows 2000 server.
It includes:
     - Oracle HTTP Server
     - Oracle9iAS Containers for J2EE
     - Oracle9iAS Web Cache
     - Oracle Enterprise Manager
The release of installed Oracle9iAS is Release 2
(9.0.3)
I referred following link to Deploy Applications
Using WAR file:
     http://otn.oracle.com/products/ias/daily/sept12.html
As mentioned in this documentation I have followed
following steps to deploy WAR file:
1] I have created a war file by name
SimpleServlet.war. In SimpleServlet.war, there is a
servlet by name Simple which prints time at which
servlet was accessed.
2] I have modified
<ora9ias_home>\j2ee\home\config\application.xml and
added following web module entry:
<web-module id="SimpleServlet"
path="../../home/applications/SimpleServlet.war" />
3] To make this module accessible from over the web,
I have modified file
<ora9ias_home>\j2ee\home\config\default-web-site.xml
and added following entry:
<web-app application="SimpleServlet"
name="SimpleServlet" root="/SimpleServlet"/>
4] I saved both the files and started Oracle HTTP
Server and accessed page as below:
          http://<server>:7777/SimpleServlet/Simple
where Simple is servlet in SimpleServlet.war file.
In the browser, The page cannot be found is shown to
user. I have verified that SimpleServlet.war is
extracted to SimpleServlet folder under
<ora9ias_home>\j2ee\home\applications folder. I found
that Simple.class is stored under WEB-INF/classes
folder and web.xml contains correct entry for url
pattern for servlet Simple.
What else could be the problem? Am I placing the war
file in wrong place or modifying application.xml or
default-web-site.xml in a wrong directory?
This is very urgent. Please help me with your
valuable comments on this.
Thanks in advance.
Regards,
SandeshHave you restarted you http server and then tried to load it again? Are you using the right port; maybe you have to use port 7778? Check you server settings in the http server instance. Also check your url binding of you application at Farm > Application Server: infrastructurehost > OC4J_instance > Application: appname > Web Module: modulename
Good luck!
rgds Thomas

Unable to deploy a simple servlet using WAR file

Hi All,
I am facing problem while deploying a simple servlet using WAR file on Oracle 9i App Server.
I have installed Oracle 9i App Server. I referred following link to Deploy Applications Using WAR file:
     http://otn.oracle.com/products/ias/daily/sept12.html
As mentioned in this documentation I have followed following steps to deploy WAR file:
1] I have created a war file by name SimpleServlet.war. In SimpleServlet.war, there is a servlet by name Simple which prints time at which servlet was accessed.
2] I have modified <ora9ias_home>\j2ee\home\config\application.xml and added following web module entry:
     <web-module id="SimpleServlet" path="../../home/applications/SimpleServlet.war" />
3] To make this module accessible from over the web, I have modified file
     <ora9ias_home>\j2ee\home\config\default-web-site.xml and added following entry:
     <web-app application="SimpleServlet" name="SimpleServlet" root="/SimpleServlet"/>
4] I saved both the files and started Oracle HTTP Server and accessed page as below:
          http://<server>:7777/SimpleServlet/Simple
where Simple is servlet in SimpleServlet.war file.
In the browser, The page cannot be found is shown to user. I have verified that SimpleServlet.war is extracted to SimpleServlet folder under <ora9ias_home>\j2ee\home\applications folder. I found that Simple.class is stored under WEB-INF/classes folder and web.xml contains correct entry for url pattern for servlet Simple.
What else could be the problem? Am I placing the war file in wrong place or modfiying application.xml or default-web-site.xml in a wrong directory?
This is very urgent. Please help me with your valuable comments on this.
Thanks in advance.
Regards,
Sandesh

Hi Juliana,
Thanks a lot for your suggestion.
I am sorry if I have posted this message to a wrong forum. This is first time I am posting a message to OTN. I will resend message to J2EE forum as per you suggestion.
Meanwhile, please note information you asked for is as below:
I installed Oracle9iAS J2EE and Web Cache v9.0.3 on Windows 2000 server.
It includes:
     - Oracle HTTP Server
     - Oracle9iAS Containers for J2EE
     - Oracle9iAS Web Cache
     - Oracle Enterprise Manager
The release of installed Oracle9iAS is Release 2 (9.0.3)
Please do reply at the earliest.
Once again thanks and look forward to hear from you.
Regards,
Sandesh

Using XML file in Java script to create Google Map

Hello,
I work for a non-profit in San Diego as a GIS Specialist. I have had to teach myself about some scripting to create some dynamic maps, but I am still very limited in my skills, so I have had to explore the internet in order to discover various tutorials and examples that have led me on a positive path.
Right now I am working on a Google Mash-Up that will incorporate over 14,000 records, which will appear as separate markers that will have pop-up info bubbles with additional info inside (using html), once the marker is clicked.
Here is the XML script example that is used in the tutorial I am following:
<markers>
<marker lat="43.65654" lng="-79.90138" html="Some stuff to display in the<br>First Info Window"
label="Marker One" />
<marker lat="43.91892" lng="-78.89231" html="Some stuff to display in the<br>Second Info Window"
label="Marker Two" />
<marker lat="43.82589" lng="-79.10040" html="Some stuff to display in the<br>Third Info Window"
label="Marker Three" />
</markers>
...and this is how it looks when the file is retrieved by the java script and mapped: http://econym.googlepages.com/example_map3.htm
This is the java script that creates the Google Map. I have emboldened the section of the script that retrieves the data and parses it to create the markers:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>Google Maps</title>
<script src="http://maps.google.com/maps?file=api&v=2&key=ABQIAAAA6GoL8P5zqjQlG5A5uM1ETBSUPozAscB0cY3RG8xEGnZyeom4axRySak889rVpvHYRsV4f9OZZzbboA"
type="text/javascript"></script>
</head>
<body onunload="GUnload()">

<table border=1>
<tr>
<td>
<div id="map" style="width: 800px; height: 1200px"></div>
</td>
<td width = 200 valign="top" style="text-decoration: underline; color: #4444ff;">
<div id="side_bar"></div>
</td>
</tr>
</table>
<noscript><b>JavaScript must be enabled in order for you to use Google Maps.</b>
However, it seems JavaScript is either disabled or not supported by your browser.
To view Google Maps, enable JavaScript by changing your browser options, and then
try again.
</noscript>
<script type="text/javascript">
//<![CDATA[
if (GBrowserIsCompatible()) {
// this variable will collect the html which will eventualkly be placed in the side_bar
var side_bar_html = "";
// arrays to hold copies of the markers used by the side_bar
// because the function closure trick doesnt work there
var gmarkers = [];
var i = 0;
// A function to create the marker and set up the event window
function createMarker(point,name,html) {
var marker = new GMarker(point);
GEvent.addListener(marker, "click", function() {
marker.openInfoWindowHtml(html);
// save the info we need to use later for the side_bar
gmarkers[i] = marker;
// add a line to the side_bar html
side_bar_html += '<a href="javascript:myclick(' + i + ')">' + name + '</a><br>';
i++;
return marker;
// This function picks up the click and opens the corresponding info window
function myclick(i) {
GEvent.trigger(gmarkers, "click");
// create the map
var map = new GMap2(document.getElementById("map"));
map.addControl(new GLargeMapControl());
map.addControl(new GMapTypeControl());
map.setCenter(new GLatLng( 37.251699,-119.604315), 7);
*// Read the data from testXML2blackpoolformat.xml*
var request = GXmlHttp.create();
request.open("GET", "testXML2blackpoolformat.xml", true);
*request.onreadystatechange = function() {*
*if (request.readyState == 4) {*
var xmlDoc = GXml.parse(request.responseText);
*// obtain the array of markers and loop through it*
var markers = xmlDoc.documentElement.getElementsByTagName("ConnectoryRecord");
*for (var i = 0; i < markers.length; i++) {*
*// obtain the attribues of each marker*
*var lat = parseFloat(markers[i].getAttribute("lat"));*
*var lng = parseFloat(markers[i].getAttribute("lng"));*
var point = new GLatLng(lat,lng);
*var html = markers[i].getAttribute("html");*
*var label = markers[i].getAttribute("label");*
*// create the marker*
var marker = createMarker(point,label,html);
map.addOverlay(marker);
// put the assembled side_bar_html contents into the side_bar div
document.getElementById("side_bar").innerHTML = side_bar_html;
request.send(null);
else {
alert("Sorry, the Google Maps API is not compatible with this browser");
// This Javascript is based on code provided by the
// Blackpool Community Church Javascript Team
// http://www.commchurch.freeserve.co.uk/
// http://econym.googlepages.com/index.htm
//]]>
</script>
</body>
</html>
Here is my delima--
This is the xml format that I need to use because it can accept the rest of my excel file and loop it through the 14,000+ records to create a functioning xml file. This is just a sample (2 records) of the larger file:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
<ConnectoryAug2008>
<ConnectoryRecord>
     <lng>-117.03683</lng>
     <lat>32.944505</lat>
     <ConnectoryID>1</ConnectoryID>
     <Name>$2.95 Guys</Name>
     <StreetAddress>13750 Stowe Drive</StreetAddress>
     <City>Poway</City>
     <State>CA</State>
     <Zip>92064</Zip>
<Marker>White</Marker>
     <IndustryGroup>Technical Services</IndustryGroup>
     <ConnectoryProfileLink>http://connectory.com/search/profile_view.aspx?connectoryId=1</ConnectoryProfileLink>
</ConnectoryRecord>
<ConnectoryRecord>
     <lng>-117.272843</lng>
     <lat>33.13337</lat>
     <ConnectoryID>2</ConnectoryID>
     <Name>(GLDS) Great Lakes Data Systems</Name>
     <StreetAddress>5954 Priestly Drive</StreetAddress>
     <City>Carlsbad</City>
     <State>CA</State>
     <Zip>92008</Zip>
<Marker>Orange</Marker>
     <IndustryGroup>Technology</IndustryGroup>
     <ConnectoryProfileLink>http://connectory.com/search/profile_view.aspx?connectoryId=2</ConnectoryProfileLink>
</ConnectoryRecord>
</ConnectoryAug2008>
This is the tutorial where I found the formatting techniques to successfully create the large xml file that will format/convert my excel file properly: http://www.mrexcel.com/tip064.shtml
These variables should appear as html in the info bubble:
<ConnectoryID>2</ConnectoryID>
     <Name>(GLDS) Great Lakes Data Systems</Name>
     <StreetAddress>5954 Priestly Drive</StreetAddress>
     <City>Carlsbad</City>
     <State>CA</State>
     <Zip>92008</Zip>
<IndustryGroup>Technology</IndustryGroup>
     <ConnectoryProfileLink>http://connectory.com/search/profile_view.aspx?connectoryId=2</ConnectoryProfileLink>
The "Marker" variable instructs Google Maps to label the marker with a particular color. I will be so grateful to the person(s) that helps me get through this wall that I have been hitting for a long time. It's very difficult without having the luxury of peers who know about these types of issues.
Thank you!!

Here is the relationship: They both contain geographic coordinates that produce a point on a map. I will use the rest of the information in the second xml file (company name, address, link, etc.) to produce the information for the bubble that will pop up once the marker is clicked.
My problem is that I need to try to keep the second xml file in a relatively similar format, so the rest of my records will still be accepted. If I had a smaller amount of records I could place them directly into the javascript, but because there are so many records, I need to use an xml file that can be retrieved by the java script. I chose to use the second type of xml file because I can easily copy and past the 14,000+ records that are now in excel document.
After the xml issue is corrected I need to rework the javascript that is now emboldened so that it will read the new xml file correctly. I included the first xml file so that the readers will understand what type of xml format is currently being used to produce the markers in the tutorial map.

Best workflow using DNG files from Odyssey 7Q in Premiere 8.1

Finally, the magenta highlights issue has been fixed in this new 8.1 version of Premiere - lovely! :-)
I'm wondering though, what the best workflow is when using 2K/4K raw dng image sequences from the Odyssey7Q? In this case, shot on the Sony FS700.
Is there a simple and easy way to batch import a bunch of clips?
The behavior of the Media Browser in Premiere is a little different than the last version... When you choose the individual dng clip folders it now shows one single dng sequence files instead of a bunch of individual png images. But you still have to browse to each clip folder and choose the dng sequence file. If you just choose the root that contains the clip folders or if you choose multiple clip folders, it will import the content of those folders as individual dng image files! Pretty annoying...
Does anyone know of a better way to import where you don't have to choose each clip manually?
Also, how do you bring a PP edit sequence into AE for ACR processing? You can't copy/paste the files and you can't choose "Replace With After Effects Composition" - those two methods will just import one single DNG frame into AE.
You can import a whole PP project into AE but that will just show the entire PP sequence as one single file. You can't access the individual clips or open it in ACR.
The best method I know of is export all the DNG sequences as proxies, edit the material using the proxies on PP timeline, copy/paste that into an AE comp and then manually replace each of the used proxy files with the original DNG files, which will open up the ACR. But that's a bit of a hassle...
Is there any way of taking advantage of the full dynamic range of the DNG files in Premiere? When I bring down and overexposed image using either fast color correction or by right-clicking on a clip and choosing "source settings..." and using the exposure slider, the image looks "flat" but when I do the same thing using the ACR, I can reintroduce the details otherwise lost in the overexposure.
Any info or advice on this will be greatly appreciated

Hi EyelightKasper,
See if this method will work for you: Re: How to import multiple DNG files into Premiere
Thanks!
Kevin

How to use XSJS file path in Controller.js file

Hi Experts,
Regarding How to use XSJS file path in Controller.js file.
I have gone through the SAP HANA Extended Application Services (Thomas Jung http://scn.sap.com/community/developer-center/hana/blog/2012/11/29/sap-hana-extended-application-services article.)
Seems to be there is no information about the same. May be the article is targetted for Beginners and above. As I am a learner I am not able to do the same.
var aUrl = '../../logic/demo_main.xsjs? (highlighted)
Suppose my XSJS file is at http://ipaddress:8000/newtest/Func.XSJS.
Can I use like below
var aUrl = 'http://ipaddress:8000/newtest/Func.xsjs?
or
var aUrl = '../../newtest/Func.xsjs?
I tried with multiple options but not able to get the expected output.
Can you please provide more details on this?

Dear Thomas,
I am a abap developer , recently we meet a problem on our webdynpro report performnace issue. As in the development, we use SALV_WD_TABLE to design a ALV. and verything work correctly in our DEV system.
But after when our QAS system, there are more records for the ALV, one of them has 21000 records. And in the layout, we have a column as checkbox.
If we click any one checkbox, then the layout will respond almost 1~2 minutes. With debug I found the most time cost in the standard program.
And with search I found that you have solution to solve it as 1,000,000 rows.
So is it possible to provide some idea or solution to us?
Many thanks for your help!
BR
Vincent Chen

Premiere Pro CC does not open MOD files correctly

Hi,
I just started using the Adobe Creative Cloud as a trial, in particular the Premiere Pro CC software, since it might be relevant, I am working on a mac (completely updated as of yesterday).
I have a JVC GZ-MG505 camcorder. This device saves the video files on an internal HDD in a file format called MOD. From what I have been able to see when searching on the web, this should be nothing more than a MPEG-2 file.
So, I tried importing some video files into Premiere Pro and to my surprise, I noticed that a whole strip on the right hand side of the image is missing. The original is recorded in a widescreen (16:9) format with 720x576 pixels and Premiere Pro gives me a file with 540x576 pixels. I have tried using the Interpret Footage to change this, but it doesn't let me change the number of pixels. I also tried opening the files in Adobe Media Encoder and I have exactly the same results as in Premiere Pro. However, opening the files in VLC or mPlayer they come out exactly as expected with all the pixels there. Has anyone come accross this problem before or can anyone help me with solving this?
I could try reencoding the files with VLC, but the output file is much smaller than the input file, so I am afraid I am loosing some definition.
So, just to restate my problem, the adobe products open my MOD files without complaining, but for some reason they loose a strip 180 pixels wide on the right hand side of the image.
Cheers

Premiere Pro CC does not open MOD files correctly
That is correct: there is a bug in CC. In CS6 they work correctly.
Please file a bug report.
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
http://forums.adobe.com/message/5658455#5658455
search for mod files and you will find one or two other threads.

Using HTC file correctly

Similar Messages

Maybe you are looking for