Using iMac with KVM switch

Hello --
Can someone tell me if I purchased a new iMac with either the corded or cordless keyboard, could I hook up the keyboard, mouse, and monitor to a KVM switch and use the keyboard, mouse, and monitor with a PC? The KVM switch uses USB for the keyboard/mouse input.
I have to use the PC for work, but I don't want two keyboards, mice, and monitors on the desk, if anyone's curious why I'd want to do this.
Thanks!
Paul
Future iMac Mac OS X (10.4.4)

Someone correct me if I'm wrong... (I'm sure they will!)... but I don't believe the iMac can display a video signal input from another source (pc). It certainly can output to a second monitor, but that won't solve the space problem posed by two monitors on your desktop.
TiBook G4 1G, PMac G4 dual 1G, MacPlus Mac OS X (10.4.4)

Similar Messages

I recently purchased a used imac with os 10.6 The problem I am having the admin in accounts in system preferences I would like to change so I can download some items I have tried different things to do this but I cannot figure it out. thanks

I recently purchased a used imac with os 10.6 The problem I am having the admin in accounts in system preferences I would like to change so I can download some items I have tried different things to do this but I cannot figure it out. thanks in advance.

Thats the problem I bought it from a very large thrift store. i went back asked the person where I bought the computer he said we can not give you the password. I thought buying it there was a good idea because not only was it a nice deal but it was like I was maknig a donation. I know that i messed up because i do not have the installation disk. I bought it without thinking. Until recently I was still using an old G4 9.0 os. I guess you can say I have been out of the loop for a while.

Mac mini with KVM switch

I'm thinking of getting a Mac mini, but I need my Windows PC for some apps that aren't available on Mac and some other stuff. I can't afford to get a large monitor for a Mini if I get one, but my current PC has a big flat panel display.I noticed the KVM cable way of moving your stuff (a cale taht lets peripherals like monitors, keyboard and mice be connected to two computers so you don't need a separate one for eache computer), and was wondering if that's a possible way of using both without buying monitors, etc. for the Mini.
Is anyone doing this, and if so, what do you think of using the Mini this way? Does it work well, and what are the pros and cons of doing this?
Thanks,
Ilya Smirnov

My experience with my Belkin KVM is also good, with the exception of one thing. I can't switch back to the Mini once I've switched to the PC. I have to unplug the PS2/USB adapter from the Mini and THEN do Scroll Lock-Scroll Lock 2. The KVM then switches, and I can plug back in. Everything works fine after that. It gets cumbersome though if you want to switch seamlessly between the two.
I only use the KVM for the KM part these days since my monitor (Samsung 930b 19" LCD) is able to switch between DVI and VGA by itself. And since I'm using the Windows box mostly for gaming these days, I use the DVI with the PC and the VGA with the Mac. The KVM was able to handle it without any distortion when I ran VGA on both of them. To the best of my knowledge, there isn't a cost-effective DVI KVM switch out there yet. I could be wrong.

New Apple Keyboard for Dual G5 with KVM Switcher

Hi Everyone,
I have a Dual Mac G5 and a Dual Mac G4 with a Belkin KVM Switcher, so they are able to both share one monitor. I am not sure of the model number of the Switcher, but I bought it because it was recommended by Apple. It has worked flawlessly since I installed it over a year ago.
My problem is this. I plugged the new Mac keyboard into the G5, where the old one was. When I did this, the Switcher just kept switching back and forth, on and off, and just was not behaving.
Is there some software out there that I have to install that will enable me to plug in the new Mac keyboard without any problems with the KVM Switcher?
Thank you for reading this. I would sincerely appreciate any help. Best Regards, Luke 77

Just make F5 as your Dashboard...
System Preferences---> Keyboard---> Shortcuts---> Mission Control---> (check mark Show Dashboard)---> Double click the current state (could be F12). When highlighted, hit the actual key "F5".
From then on, you should be able to hit "F5" and it'll show the Dashboard for you.
I believe there are at least two Apple Wireless keyboard out there. The one that I am on right now shows 6 squares on the F4 key. The other has the dial face on the F4 key. This one also has brightness control for the backlighting on the keyboard, or rather the built-in keyboard of a Mac Book (Air and Pro). Which are on the F5 and F6 keys. Why Apple did that, I have no idea.
You could also use a Hot Corner to open the Dashboard. For instance use the upper left for it.
System Preferences---> Mission Control---> Hot Corners (lower left of the window)---> Select the upper left and scroll to Dashboard.
I personally like to have the Dashboard "fly" over my current screen/desktop. So I unchecked "Show Dashboard a Space."
KOT

Monitor blacks out when booting with KVM Switch in the middle

Hi
I have attached my Xserve with an iMac G5 to a KVM Switch. When I boot up the Xserve the monitor blacks out after the apple logo.
I know that the Xserve tries to autodetect the monitor. Apparently it fails in its job when the KVM is in the middle. Everything works well when I remove the KVM and connect the monitor directly to Xserve.
Any ideas how do I disable the monitor autodetect feature - or something?
Xserve (intel) Mac OS X (10.4.1) dkvm-4u KVM switch

Hi all
I did try that. No luck.. Strangely enough, I realized that when the server boots up, the login screen defaults to 85HZ refresh rate. I found a site that explains the plist file that you can change to force it to 60HZ. What is weird it if I boot the Mac connected to another LCD, then move the cable to the KVM, it works. It almost seems like when the mac is booting, it sends some sort of signal just before the login screen comes up, that screws up this KVM. Tried updating firmware, still in the process of speaking with the KVM support people...
very strange..
Enio

Connecting to PC Monitor with KVM Switch

I'm still setting up my new MacBook Pro laptop. I thought it would be nice to take advantage of my 21" PC monitor while I'm at home, so I purchased my first KVM switch.
I plugged everything in as instructed, and it appears to be working at about 75%. In other words, I can use my mouse and keyboard with my PC just fine, and when I click the Scroll Lock key twice, the monitor shifts to Apple mode; it has the same bluish background my laptop does.
However, it doesn't display anything I see on my laptop's built-in monitor - the menu bar, open programs, etc. Curiously, it displays one folder, titled "untitled folder 3." My mouse works, though there's nothing for it to manipulate, save one empty folder. I can't tell if the keyboard works or not. The trackpad that's built into my laptop also works on my PC monitor. In other words, I can move the cursor on my larger PC monitor with either the mouse or the trackpad.
Next, I reversed the wires, plugging the PC into the KVM node that had formerly connected to my MacBook Pro and vice versa. The results are pretty much the same, except that now when I toggle to Apple mode, my mouse moves the cursor on the laptop's built in monitor, not on the larger PC monitor. Also, my MacBook told me it didn't recognize my keyboard, so I replaced it with a Mac-compatible keyboard. (I learned how to do the hot key trick so I can toggle by hitting the CTRL key twice.)
So my KVM switch is obviously almost working. I just have to convince my laptop to ignore its built in monitor and display everything on my PC monitor, not just one empty folder. Can anyone tell me what's going on, and how to fix it? Thanks.

Though for 10.3 this will work for 10.4
Printing to a printer on an XP PC from a Mac running 10.3.x (alternative method)
http://www.ifelix.co.uk/tech/3009.html
If you don't want to use guest access then
Device URI: smb://XPusername:XPpassword@<IP address>/<the share name of your shared printer>
instead of
Device URI: smb://guest@<IP address>/<the share name of your shared printer>
should also work.

I've lost OpenGL support with KVM switch. Help!

I have a Win7 64 machine and an XP machine at work. I installed an Iomega KVM switch to use the same monitor/keyboard/mouse with both computers. Problem is, once I installed the KVM, Photoshop can't detect my video card, so I lose OpenGL support. Very irritating. Anyone had this problem and/or know of a solution? Thanks!

Did you reboot Windows after plugging the monitor into the computer?
On another note, it's possible a recent video driver update changed the behavior. Photoshop queries the OpenGL system for its capabilities, and if something's gotten broken Photoshop might not allow the OpenGL operations. What video card do you have?
There is a workaround you can try - a registry tweak - that will instruct Photoshop to use OpenGL calls anyway:
Go to this site: http://www.adobe.com/support/downloads/detail.jsp?ftpID=4056
Download the file and extract AllowOldGPUS_ON.reg. You don't say which version of Photoshop you're using, but if it's CS4 the file is good to use as is. If CS5 then you'll need to edit the file with a text editor to change 11.0 to 12.0. Make sure you're an Administrator and double click the file to enter it into your registry.
-Noel

Wiping a used iMac with missing install discs

Hello all,
I am getting a used iMac from my brother within the next month or so. He has installed alot of 'junk' on it that I would like to remove. Preferably I would like to completely wipe the hard drive and start from scratch.
Currently it is running 10.6.8 but it does not have the original install discs that came with it when purchased new. Am I going to have a problem reinstalling the OS without the cds and what would everyone recommend as the best thing to wipe the drive?
I am very familiar with doing this type of thing on a PC, but I am much less experienced with Macs.
thanks in advance.

Phone AppleCare and order replacement disks; if the computer originally shipped with 10.6.2 or earlier, a retail Mac OS X 10.6 DVD can be used instead(they're available in the online Apple Store), but won't install iLife.
(101231)

Using iMac with dead internal drive long term

I've got a friend with an iMac with a definitely dead internal HDD. Got it back running with an external and it seems to work. We also selected that external as the default start up in System Prefs.
I'm curious was to whether, however, he can just run it forever with that HDD inside. I'm not at his machine, but when working on it I saw some evidence that there were attempts to access it, from like mds for Spotlight, and so on. If it was one of mine I'd at least yank the drive, but he doesn't wanna pay to repair it and is quite content with the external. But we'd like to know if that wonky drive is gonna cause issues, or if there's a way through software to disable it forever.

Add it to Spotlight's Privacy prefPane to preclude indexing. That's all that needs doing.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

HT1750 bought a used iMac with bad HDD and I have a external HDD but it wont let me reinstall the os until it is registered to me

I bought a iMac with a bad hdd but I have a external hdd. I wanted to reinstall the OS on the external but it would not let me because I am not the registered user. What can I do as I do not have the original user info?

You can go to the Mac App Store from another Mac and purchase Mountain Lion while logged in with your Apple ID. It's $19.99 US. After that you can just sign in at the re-install screen with your AppleID and password and it will verify that you did purchase it.

2nd Monitor with KVM switch

hi,
i work for a major broadcast company who use a MacPros for trade shows (NAB, IBC etc) with a mirrored output.
monitor two goes directly into a 23" Cinema Display.
monitor one goes onto a geffen KVM to a 42" panasonic plasma running at the same resolution as the cinema display.
when we switch back to the mac from another computer the cinema display seems to run an autodetect again and takes sometimes up to 30secs to detect, correct and return to use (so we can keep using the k+m).
does anyone know a way to disable this autodetect? i can't seem to find anything, neither can the apple people i've spoken to. i've tried using a single geffen DVI splitter but with similar results.
thanks

i think i can get hold of some to test. thanks.
is there no unix code i can apply to disable the autodetect? i've applied code for various other "niggles" we've had to great success, i'm just not sure about this one.
thanks.
alex

Using D9854 with Multi-Switch

Hi ,
I am using Cisco D9854 Receivers with Multiswitch that is connected to 3 satellites .
How to configure the Receiver to use a specific satellite ?

Someone correct me if I'm wrong... (I'm sure they will!)... but I don't believe the iMac can display a video signal input from another source (pc). It certainly can output to a second monitor, but that won't solve the space problem posed by two monitors on your desktop.
TiBook G4 1G, PMac G4 dual 1G, MacPlus Mac OS X (10.4.4)

I recently bought a used iMac with OS X 10.6.7 and I can not get to the adminstrators account. I do not have the OS disc. Any help is greatly appreciated.

How can I reset the Administrators password to create a new one?

Forgot Your Account Password
For Snow Leopard and earlier
     Mac OS X 10.6- If you forget your administrator password
For Lion/Mountain Lion
    Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     When the menubar appears select Terminal from the Utilities menu.
     Enter resetpassword at the prompt and press RETURN. Follow
     instructions in the dialog window that will appear.
     Or see Reset a Mac OS X 10.7 Lion Password and
     OS X Lion- Apple ID can be used to reset your user account password.
If you are unable to boot from an installer DVD:
(these will only work on Leopard or earlier)
1. Boot to Safe Mode by restarting and after the chime press and hold down
      the COMMAND-S keys until a black screen with white type appears.
2. At the prompt, type the following commands pressing return after each
      command line:
     /sbin/fsck -yf
     If you do not receive a "Filesystem OK" message then repeat this command
     until you do. If after seven tries you still do not receive a "Filesystem OK"
     message, then the system is corrupted and needs to be reinstalled.
     mount -uw /
     cd /private/var/db/netinfo
     mv local.nidb local.old
     rm ../.AppleSetupDone
     shutdown -r now
The second-to-last command above will cause OS X to think that the operating system is newly installed, and when the new owner starts up the computer it will send him/her to the startup wizard where he/she can start a new user without reinstalling.
This last method does not actually change a password. It simply removes the user accounts and lets you create an initial admin account as if the computer were new out of the box.
Reset Admin Password Using The Terminal
You can reset the password by printing out (or writing down) and carefully following these steps.
First, find the short name of the admin user on the machine. The easiest way of doing this is by looking at what the directory is called in the Users folder.
Now, start in Single-user Mode. It should boot into a command line.
Enter these exact lines. Press RETURN after each.
mount -uw /
ifconfig lo0 up
cd /var/db/netinfo
netinfod -s local
Now you'll need that short name. Enter "passwd", a space, and the short name of the admin. For example, if the admin was rather prosaically called "imadmin", you would enter "passwd imadmin".
The computer will now prompt you to change the password for "lmadmin" (or whatever the short name was). Go ahead and enter a new password.
Now, enter:
sync
reboot
and the machine will reboot. The admin password should now be changed.

TS4080 Try to use iMac with Thunderbolt cable as a display and it goes black

For work I have a MacBook Pro 15" Late 2011. I connected a Thunderbolt cable to both the MacBook Pro and iMac. When I press Command F2 to use the iMac as my main screen, the iMac just goes dark. No screen at all. I can only get out of using Command F2.
What am I missing. How can I used my iMac as external display for my MacBook Pro.
Thanks.

All firmware current on that late 2011 MacBook Pro? This EFI firmware update addresses Thunderbolt target display mode, and other issues.

I bought a used iMac with cs6 already installed. If I want to use cs6 on another computer, how would I load/install it (I can't seem to find any serial number)?

sorry th title is so long. Wondering if I can use cs6 on another computer besides my 2009 iMac. Thanks.

Transfer of software to another owner is usually handled by Adobe.
So if you do not have a serial number its not yours to use.

Using iMac with KVM switch

Similar Messages

Maybe you are looking for