Using IN Operator in Sql

How can I run the following query with multiple parameters.
Select empno,ename from emp
where (empno,ename) in
(7369,'SMITH',7900,'JAMES')
What am I missing ?
Best Regards,
Luqman

SQL> select empno,ename
2 from emp
3 where (empno,ename) in ((1234,'BAKER'),(5321,'OTOOLE'));
     EMPNO ENAME
      1234 BAKER
      5321 OTOOLE

Similar Messages

Error while using between operator with sql stmts in obiee 11g analytics

Hi All,
when I try to use between operator with two select queries in OBIEE 11g analytics, I'm getting the below error:
Error Codes: YQCO4T56:OPR4ONWY:U9IM8TAC:OI2DL65P
Location: saw.views.evc.activate, saw.httpserver.processrequest, saw.rpc.server.responder, saw.rpc.server, saw.rpc.server.handleConnection, saw.rpc.server.dispatch, saw.threadpool.socketrpcserver, saw.threads
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 27002] Near <select>: Syntax error [nQSError: 26012] . (HY000)
can anyone help me out in resolving this issue.

Hi All,
Thank u all for ur replies, but I dint the exact solution for what I'm searching for.
If I use the condition as
"WHERE "Workforce Budget"."Used Budget Amount" BETWEEN MAX("Workforce Budget"."Total Eligible Salaries") AND MAX("Workforce Budget"."Published Worksheet Budget Amount"",
all the data will be grouped with the two columns which I'm considering in the condition.
my actual requirement with this query is to get the required date from a table to generate the report either as daily or weekly or monthly report. If I use repository variables, variables are not getting refreshed until I regenerate the server(which I should not do in my project). Hence I have created a table to hold weekly start and end dates and monthly start and end dates to pass the value to the actual report using between operator.
please could anyone help me on this, my release date is fast approaching.

Filter SharePoint list items using CAML query as same as Like operator in SQL Server.

Hi ,
I have filtered SharePoint list items based on Name using CAML query <Contains> . Now I have a new requirement is to filter list items using Like operator in SQL. But Like operator is not in CAML.
How do I filter list items using CAML as same as Like operator in SQL.
Please let me know.
Thanks in Advance.

Did you try using <Contains>?
http://social.technet.microsoft.com/Forums/sharepoint/en-US/15766fd5-50d5-4884-82a1-29a1d5e38610/caml-query-like-operator?forum=sharepointdevelopmentlegacy
--Cheers

Delete operation for SQL using Biztalk Service

Dear All,
I have scenario like this "I am trying to insert the record to Multiple Tables in
SQL. When i got the exception in during the insert of the second table, i want to delete the inserted record from first table. this task achieve from Biztalk service"
can any one tell the suggestion for this scenario..
Thanks
Jegannathan Kumar
jeganna

In previous thread, you mentioned that you are using composite operation.
Data cannot be shared or reused across different operations in a composite operation.
So, above is not possible with composite operation.
regards,
Shailesh

How to pass variable into lov sql query using like operator

hi.
i want to use a lov where i want to pass a variable using like operator.
my query is
select empno,name from table where empno like ':ed%';
my empno is A001 TO A199 AND B001 TO B199 so i want show either A% or B% empno
how can i do this ?
reagrds

kindly press Shift+F1 at a time you face this error to see the exact Oracle error message.
and provide us with that detail
and its better if you start new topic for that error... because that will be new error,,,
-- Aamir Arif
Edited by: Aamiz on Apr 7, 2010 12:27 PM

How to build dynamic query strings in the query using DB adapter 'Pure SQL'

Dear Forum,
I am building an application which will access DB to fetch some result set. The query involves retrieving data from multiple tables(nearly 10 tables). So I have created a DB adapter using 'execute pure sql' option. With this query works fine, but my inputs parameters will vary. So I need to make my query dynamic to append the query strings at runtime depending on the inputs.
For example I have 3 input variables - input1,input2 and input3 (in my request xsd) which are used in the pure sql query. Now if I get a 4th input parameter input4 in the request, I need to append this to query string as 'AND input4=[some value]' at runtime. Otherwise my query should have only 3 parameters. Please suggest how this can be achieved.
Regards,
Satya.

This is a strange requirement, depending on the columns you have and what are optional in them, one way is to have separate operations and each opeartion will have different inputs and for each operation , a different DB Adapter is called. But this way, it results in more number of operations for the service as well as more number of references in the composite. Even if you pass the column inputs to the SQL procedure, it will result in a large number of if-else cases..
Thanks,
N

Error using Data Miner on SQL Developer

Dear all.
I'm trying to use Data Miner on SQL Developer (3.1.06) with Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 -
64bit Production, with the Partitioning, OLAP, Data Mining and Real Application Testing options.
I created a project, a workflow, a data source, a classification model and connected them.
I tried to show the Decision Tree generated as described in the tutorial "Using Oracle Data Miner 11g Release 2".
But, I receive the message "It's not possible to load the data mining model because it does not exist" in a dialog box entitled "Model not found".
It seems that something was missing either during installation or granting my user.
Does anybody have seen this message and know what causes it?
Any other suggestion is welcome.
Regards,
Duncan
PUCRS-Brazil

Hi Mark.
Thank you on replying my post.
I'm not the DBA of Oracle repository here. So, if possible, I'd like to address my issue without having to do anything in it.
I'll try to state better what we have here.
When I try to use latest SQL Developer version, 11.2.1.1.7.42, it got me a message stating current repository isn't compatible with this SQLDev version
Repository version is: 11.2.1.1.3
I don't know what type of upgrade SQL Developer wants to do...
About your other questions.
"Is the model not found error occurring for all models or just the DT model?" -- The error occurs for all 4 standard models: SVM, GLM, NB and DT. But, I'm able to see all other options: "show tests results", "Compare tests results".
You did not report that the workflow failed, so you must be seeing a successful completion status for each of the nodes. -- Yes, all steps are executed and finished OK.
Are you using a proxy user or some other connection definition other than a standard connection. -- No.
There is currently some problems supporting proxy based connections that will be fixed in a upcoming SQL Developer release.
So, if you can provide me some details on how your connection is defined, that will be helpful.
How was the product installed and the user granted rights? -- I need to ask PUCRS DBA team to answer these questions.
Was it done through the UI or by running the scripts in the dataminer/scripts directory?
Lastly, what is your client operating system and are you using the SQL Dev 64 bit or 32 bit release? -- I tested in 2 different computers, both with Windows 7 Professional. In my notebook, it's 64 bits OS version.
Thank you for your attention and kind reply.
Regards,
Duncan

'||' Operator in sql query

Hi All,
we are using the "||" operator in the sql query.At the terms of the performance,Is it beneficial or not?
Please suggest me.
Select * from emp
where (ename||empno) in ('xxx'||'yyyy')
Thanks in advance...

user00001 wrote:
Hi All,
we are using the "||" operator in the sql query.At the terms of the performance,Is it beneficial or not?
Please suggest me.
Select * from emp
where (ename||empno) in ('xxx'||'yyyy')
Thanks in advance...if you have any index on empno, it wont use it. So you need to use it as
select * from emp where (ename, empno) = (('xxx','yyyy'))Ravi Kumar

Problem in JDBC , when using LIKE operator. - VERY URGENT

Problem in JDBC , when using LIKE operator.
LINE 1 : String temp = "AA";
LINE 2 : String query = "select * from emp where EMPNAME like '*temp*' ";
LINE 3 : Staement st = con.createStaement();
LINE 4 : ResultSet rs = st.executeQuery(query);
'*' character is not getting evaluated. In MS ACCESS2000 only * is accepted instead of '%'. Moreover in MS ACCESS the like operator has to be used within double quotes as a String. whereas in other databases, it accepts single quotes as a String.
Ex:
In MS ACCESS
     select * from emp where ename like "*aa*";
Other Databases
     select * from emp where ename like '%aa%';
In my situation iam passing a Variable inside a like operator and '*' is used.
For the above Scenario, Please help me out.
If possible Kindly let me know the exact Syntax.
Please give me the answer as LINE1,LINE2,LINE3,LINE4,
I have verified in JDBC Spec also, it has been specified to use escape sequence.that too did not work.
Due to this, My project is in hold for about 4 days. I could not find a suitable solution.
Please help me out.

I made a LIKE clause work with M$ Access, using PreparedStatement and the % wildcard:
            escapeStr                   = "%";
            String sql                  = "SELECT USERNAME, PASSWORD FROM USERS WHERE USERNAME LIKE ?";
            PreparedStatement statement = connection.prepareStatement(sql);
            statement.setString(1, ("user" + escapeStr));
            ResultSet resultSet         = statement.executeQuery();
            while (resultSet.next())
                System.out.println("username: " + resultSet.getObject("USERNAME") + " password: " + resultSet.getObject("PASSWORD"));

Transformations not occuring properly using PIVOT operator in OWB mapping.

Hi ,
In our project we have a OWB Map UII_D_MAP_SPC_CUST_FAULT_NATTR which is used to populate UII_CUSTOMER_FAULT table in our target side.
The source table which populate UII_CUSTOMER_FAULT is SR_S_TABLE_N_ATTRIBUTEVALUE (a materialized view in another External Db)
This Mview has 2 columns: S_N_STRINGVALUE & N_NAME.
When N_NAME is 'FAULT_REPORT_CODE' the corresponding S_N_STRINGVALUE value should populate the REPORT_CODE field in UII_CUSTOMER_FAULTin the target sde.
This source to target transformations is being done by using UNPIVOT operator in this mapping UII_MAP_SPC_CUST_FAULT_NATTR.
In ideal case when S_N_STRINGVALUE is NOT NULL, REPORT_CODE value should be populated with the value of source field value (ie the value of S_N_STRINGVALUE) and when S_N_STRINGVALUE is NULL , REPORT_CODE should be populated with 'XX'.
But in some cases REPORT_CODE value in UII_CUSTOMER_FAULT table is populated as NULL when S_N_STRINGVALUE is NOT NULL
which should not happen.
We suspect that there is some prpblem in the UNPIVOT operator, but we are not able to track down the exact location where it is failing. Can you please help in resolving this problem?
Shall we remove Unpivot operator and use CASE statement in some package that will be called through Expression operator?
Please advise.
Regards
Arinjit Dhar

Arinjit,
Have got any solution forthis. Today I ran into exactly the same problem. If you have got the solution, can you please post it in the forum.
Ott Karesz,
I have posted my SQL which got generated. The problem is when I am running the SQL just for the particular data set, it is giving the output properly. But what confuses me more is, when I run the mapping just for few records, it is populating the values correctly, but when running the mapping for all the records, then it populates null values for those records.
Generated SQL:
INSERT
INTO
"TB_PIPE_1"
("ASSETNUM",
"SITEID",
"TYPE",
"STATUS",
"YEARLAID",
"MATERIALCODE",
"PRESSURECODE",
"DIAMETER",
"METHODLAID",
"JOINTTYPE",
"SDRCOL",
"LENGTHLAID",
"LENGTHDIGITISED",
"MEASUREUNITID")
SELECT
"UNPIVOT"."ASSETNUM" "ASSETNUM$1",
"UNPIVOT"."SITEID" "SITEID$1",
"UNPIVOT"."CLASSIFICATIONID" "CLASSIFICATIONID$1",
"UNPIVOT"."STATUS" "STATUS$1",
"UNPIVOT"."YEAR_LAID" "YEAR_LAID$1",
"UNPIVOT"."MATERIAL" "MATERIAL$1",
"UNPIVOT"."PRESSURE" "PRESSURE$1",
"UNPIVOT"."DIAMETER" "DIAMETER$1",
"UNPIVOT"."METHODLAID" "METHODLAID$1",
"UNPIVOT"."JOINTTYPE" "JOINTTYPE$1",
"UNPIVOT"."SDR" "SDR$1",
"UNPIVOT"."LENGTHLAID" "LENGTHLAID$1",
"UNPIVOT"."LENGTHDIGITESED" "LENGTHDIGITESED$1",
"UNPIVOT"."MESUREUNIT" "MESUREUNIT$1"
FROM (SELECT
"ASSETNUM" "ASSETNUM",
"SITEID" "SITEID",
"STATUS" "STATUS",
"YEAR_LAID" "YEAR_LAID",
"CLASSIFICATIONID" "CLASSIFICATIONID",
MIN(CASE WHEN "ASSETATTRID" = 'MATERIAL' THEN "ALNVALUE" ELSE NULL END) "MATERIAL",
MIN(CASE WHEN "ASSETATTRID" = 'PRESSUREREGIME' THEN "ALNVALUE" ELSE NULL END) "PRESSURE",
MIN(CASE WHEN "ASSETATTRID" = 'DIAMETER' THEN "NUMVALUE" ELSE NULL END) "DIAMETER",
MIN(CASE WHEN "ASSETATTRID" = 'METHODLAID' THEN "ALNVALUE" ELSE NULL END) "METHODLAID",
MIN(CASE WHEN "ASSETATTRID" = 'JOINTTYPE' THEN "ALNVALUE" ELSE NULL END) "JOINTTYPE",
MIN(CASE WHEN "ASSETATTRID" = 'SDR' THEN "ALNVALUE" ELSE NULL END) "SDR",
MIN(CASE WHEN "ASSETATTRID" = 'LENGTHLAID' THEN "NUMVALUE" ELSE NULL END) "LENGTHLAID",
MIN(CASE WHEN "ASSETATTRID" = 'LENGTHDIGITISED' THEN "NUMVALUE" ELSE NULL END) "LENGTHDIGITESED",
MIN(CASE WHEN "ASSETATTRID" = 'DIAMETER' THEN "MEASUREUNITID" ELSE NULL END) "MESUREUNIT"
FROM (SELECT
"MV_PIPE"."ASSETNUM" "ASSETNUM",
"MV_PIPE"."SITEID" "SITEID",
"MV_PIPE"."STATUS" "STATUS",
"MV_PIPE"."YEAR_LAID" "YEAR_LAID",
"MV_PIPE_SPEC"."ASSETATTRID" "ASSETATTRID",
"MV_PIPE_SPEC"."NUMVALUE" "NUMVALUE",
"MV_PIPE_SPEC"."ALNVALUE" "ALNVALUE",
"MV_PIPE_SPEC"."MEASUREUNITID" "MEASUREUNITID",
"MV_PIPE"."CLASSIFICATIONID" "CLASSIFICATIONID"
FROM "MV_PIPE_SYN" "MV_PIPE",
"MV_PIPE_SPEC_SYN" "MV_PIPE_SPEC" WHERE "MV_PIPE"."ASSETNUM" in ('466651706','606703143') and ( "MV_PIPE"."ASSETNUM" = "MV_PIPE_SPEC"."ASSETNUM" )) "OUTGRP1"
GROUP BY
"ASSETNUM", "SITEID", "STATUS", "YEAR_LAID", "CLASSIFICATIONID") "UNPIVOT"

How to use LIKE operator in plsql

Hi
I wanted to select certain rows using like operator in plsql(Input should be given by the user). I have given my experiment here .I couldn't get any result.
As per sql syntax while using LIKE operator we should give search criteria within single quote.where as in plsql if we give within single quote its takes as string so no output is comming.what is solution ? How to use like operator in plsql?
sql syntax
SQL>SELECT customer_name FROM customer_header
WHERE customer_name LIKE 'B%' ; customer_name
Bala murali
Babu
Basker
plsql syntax
PROCEDURE pro_custheader_like ( v_cname IN varchar2
     ,answer OUT type_refcur_customer) IS
     BEGIN
     OPEN answer FOR
     SELECT customer_name FROM customer_header
          WHERE customer_name LIKE ( ' v_cname ' );
END pro_custheader_like;
execution command
sql>variable answer refcursor;
sql>set serveroutput on
sql>exec package_name.pro_custheader_like( 'R',:answer);
plsql successfully completed
sql>print :answer
no row selected
by
balamuralikrishnan.s

plsql syntax
PROCEDURE pro_custheader_like ( v_cname IN
varchar2
,answer OUT
type_refcur_customer) IS
N
     OPEN answer FOR
     SELECT customer_name FROM customer_header
WHERE customer_name LIKE ( v_cname );
END pro_custheader_like;
Try it without any quotes. And, let us know your feedback.
Regards.
Satyaki De.
Message was edited by:
Satyaki_De

Writing query using UNION Operator

Question -
(1)
Write an SQL Statement to list the following items: Customer ID, Customer Name, number of invoices, sum of total for invoices. Ensure that all customers are returned in the result set.
Answer for the above is written as below by one person. That seams to be correct. Is there another way of writing this same query.;
select c.CUSTOMER_ID,c.NAME,i.cnt,i.s
from gee_customer c,(select customer_id,count(*) as cnt, sum(TOTAL) as s
from gee_invoice
group by customer_id) i
where c.CUSTOMER_ID = i.customer_id (+)
(2)
My other question is How to write the above answer (or what you sugest) using UNION operator ?
Any ideas please
Message was edited by:
user483578

In fact the outer join means you use the union of two result sets - usual join result
and the rows from the outer table for which there is not any row in the inner table.
SQL> select d.deptno, e.ename from emp e, dept d
2 where d.deptno = e.deptno(+)
3 order by 1,2
4 /
    DEPTNO ENAME
        10 CLARK
        10 KING
        10 MILLER
        20 ADAMS
        20 FORD
        20 JONES
        20 SCOTT
        20 SMITH
        30 ALLEN
        30 BLAKE
        30 JAMES
        30 MARTIN
        30 TURNER
        30 WARD
        40
15 rows selected.
SQL> select d.deptno,e.ename from emp e, dept d
2 where d.deptno = e.deptno
3 union
4 select deptno, null
5 from dept d where not exists (select null from emp e where e.deptno = d.deptno)
6 order by 1,2
7 /
    DEPTNO ENAME
        10 CLARK
        10 KING
        10 MILLER
        20 ADAMS
        20 FORD
        20 JONES
        20 SCOTT
        20 SMITH
        30 ALLEN
        30 BLAKE
        30 JAMES
        30 MARTIN
        30 TURNER
        30 WARD
        40
15 rows selected.In your example something like (NOT tested !)
with i as (select customer_id,count(*) as cnt, sum(TOTAL) as s
from gee_invoice group by customer_id)
select c.CUSTOMER_ID,c.NAME,i.cnt,i.s
from gee_customer c, i
where c.CUSTOMER_ID = i.customer_id
union
select c.CUSTOMER_ID,c.NAME,null,null
from gee_customer c
where not exists (select null from i where c.CUSTOMER_ID = i.customer_id)
Rgds.

Using XML Operation Tags to query by date

Problem 1:
When I use timestamps from items' XML to form queries on repositories, I receive SQL errors.
Problem 1 Example:
Query the PublishingRepository to find all active projects created on August 16.
In Dynamo Administration, navigate to /atg/epub/PublishingRepository
In the box labeled "Run XML Operation Tags on the Repository," enter the following tag:
    <query-items item-descriptor="project">status = "Active" AND creationDate = "08/16/2013"</query-items>
Result: java.sql.SQLDataException: ORA-01843: not a valid month
Problem 1 Solution:
Use this query instead:
<query-items item-descriptor="project">
status = "Active"
AND
creationDate = date("2013-08-16")
</query-items>
Problem 2:
Using the "<" operator to construct a less-than argument doesn't work.
Problem 2 Example:
Query the PublishingRepository to find all active projects created before August 16.
In Dynamo Administration, navigate to /atg/epub/PublishingRepository
In the box labeled "Run XML Operation Tags on the Repository," enter the following tag:
    <query-items item-descriptor="project">status = "Active" AND creationDate < date("2013-08-16")</query-items>
Result: SOURCE:org.xml.sax.SAXParseException: The content of elements must consist of well-formed character data or markup.
Problem 2 Solution:
For some reason, the ">" greater-than operator seems to work fine, even when the "<" less-than operator won't. You can switch around the order of the query to get the desired result:
<query-items item-descriptor="project">
status = "Active"
AND
date("2013-08-16") > creationDate
</query-items>

Problem 1:
When I use timestamps from items' XML to form queries on repositories, I receive SQL errors.
Problem 1 Example:
Query the PublishingRepository to find all active projects created on August 16.
In Dynamo Administration, navigate to /atg/epub/PublishingRepository
In the box labeled "Run XML Operation Tags on the Repository," enter the following tag:
    <query-items item-descriptor="project">status = "Active" AND creationDate = "08/16/2013"</query-items>
Result: java.sql.SQLDataException: ORA-01843: not a valid month
Problem 1 Solution:
Use this query instead:
<query-items item-descriptor="project">
status = "Active"
AND
creationDate = date("2013-08-16")
</query-items>
Problem 2:
Using the "<" operator to construct a less-than argument doesn't work.
Problem 2 Example:
Query the PublishingRepository to find all active projects created before August 16.
In Dynamo Administration, navigate to /atg/epub/PublishingRepository
In the box labeled "Run XML Operation Tags on the Repository," enter the following tag:
    <query-items item-descriptor="project">status = "Active" AND creationDate < date("2013-08-16")</query-items>
Result: SOURCE:org.xml.sax.SAXParseException: The content of elements must consist of well-formed character data or markup.
Problem 2 Solution:
For some reason, the ">" greater-than operator seems to work fine, even when the "<" less-than operator won't. You can switch around the order of the query to get the desired result:
<query-items item-descriptor="project">
status = "Active"
AND
date("2013-08-16") > creationDate
</query-items>

Using in operator with bindveriable

Dear All,
i facing proplem when i try to make SQL query using "in" operator but i send value as bind virable
example
Select emp.emp_id
from emp
where emp.emp_id in (:pEmpId)
but when i execute it and enter value for the bind i didn't get the result .
any idea how to solve this problem
Best Regards

Something like this will work (10g onwards)
SQL> ed
Wrote file afiedt.buf
1 with req as (select '&required_empnos' as empno from dual)
2 --
3 select *
4 from emp
5 where empno in
6    (select regexp_substr(empno, '[^,]+', 1, rownum)
7     from req
8*    connect by rownum <= length(regexp_replace(empno, '[^,]'))+1)
SQL> /
Enter value for required_empnos: 7839,7499,7934
old   1: with req as (select '&required_empnos' as empno from dual)
new   1: with req as (select '7839,7499,7934' as empno from dual)
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO
      7839 KING       PRESIDENT            17-NOV-81       5000                    10
      7934 MILLER     CLERK           7782 23-JAN-82       1300                    10
      7499 ALLEN      SALESMAN        7698 20-FEB-81       1600        300         30
SQL>

Creating table or View using UNION Operator ???????

Hi all
please need some help ,i have created aquery using UNION operator
(i.e
select A,to_number(null),C from table1
Union
select A,B,To_number(null) from table2)
it gives the output correctly and i need to make this output as View ot table
eacg time i use
Create or replace view v_1 ...........
it gives me this error :: unknown command "UNION" - rest of line ignored.
can any one pls tell me what to do
Thanks

Hi,
I found there is no error in your sql
create view x_v
as
select a from x
union
select to_number(null) from y;
this works fine.
in your sql check your right or left peranthesis
regards
Ripudaman

Using IN Operator in Sql

Similar Messages

Maybe you are looking for