Using Informatica/ETL as target system

Hello,
We have a scenario which we would like to use Informatica/ETL as target system.
Is there a connection option in SAP SLT to allow connection directly to Informatica/ETL?
Thanks,
Ky Can

In general SLT can be connected to all SAP NW supported DBs.
MSFT SQL Server Enterprise
Edition
Oracle Enterprise Edition
IBM DB2 LUW/ UDB (DB6)
IBM DB/2 zSeries
IBM DB2 iSeries (former AS/400)
IBM Informix
SAP MaxDB
Sybase ASE
SAP HANA
Anything else is not covered. I am not sure which DB Informatica is using.
In addition SLT has an integration with Data Services to get leverage the advantages of both worlds, so if Data Services is able to write to Informatica, we can put SLT for delta and real-time and DS to post to Informatica.
Best,
Tobias

Similar Messages

SAP MDM and Informatica ETL as Integration Tool

HI Expert's
We have a Scenario where i want to use Informatica ETL as a Middle ware. Informatica will pull the data from legacy and will post a tab delimited file in MDM inbound folder.
can any one guide me how to achieve this ? what all steps need to be defined at Informatica ETL Level does any one know ?
I wont be using FTP for this activity si is there any other way for this?
Thanks in advance to all of you.
Regards
Praful.

Hi Praful,
You are free to use any middleware as long as it gives data in required format to MDM
It depends what data you want to pull from source system using middleware. for Main table data (records) I am sure Middleware like informatica can place data in MDM inbound folder directly, then you don't need to Make it as FTP enabled. If NOT then you need tomake FTP enabled.
About reference data you need to decide how will you pull that from source system. Since it is not very frequent activity and if you have less number look-ups then even we can prepare data in spreadsheet and pull in MDM. Also check with Informatica if they can pull reference data from source system and place in MDM inbound folder of respective ports. If possible then you don't need to make it FTP enabled.
Having Informatica as middleware will also be helpful to carry your cleasing actvity. Update us on your views.
Cheers,
Rc

How to parameter Target System in eCATT

Dear all,
I would like to know if it is possible to have the Target System in the eCATT editor to parameterize them like the interfaces? In fact from solution manager I have to run a business scenario in diffrent satellite systems with RFC connections.
TCD (<transaction code>, <command interface> , TARGET_A).
TCD (<transaction code>, <command interface> , TARGET_B).
TCD (<transaction code>, <command interface> , TARGET_C).
etc.
Kind regards,
Aklilu

Hello Aklilu,
as all people aggree, parametrizing is no option.
But it is even not needed to support your case.
What one should do is:
Use always the same eCATT target system (e.g.TARGET_A)for operations in one certain remote system (say A). Use another eCATT target system (e.g.TARGET_B) for another remote system (say B).
All these commands together can be part of one script or a couple of scripts and modules automating one business case, like in your sample. The target systems are defined in a systemdata container, e.g. SYS_DEV.
If that business case should be executed in another landscape, copy the system data container (e.g. to SYS_PROD), exchange the RFC destinations inside the copy and execute the script with that new system data container.
You even can create multiple testconfigurations refering to the script and assign the different system data container to each. Such you can avoid to type the different system data names again and again on eCATTs start screen.
In that sense eCATT Target Systems are already variables/parameters.
A last hint:
If you have multiple occurrence of a series of transactions in the same remote system, it is not needed to write the target system at each eCATT command. Simply aggregate the commands belonging together in one script and call that script from another one using REF with the target system.
Define TESTSCRIPT SOMETHING.
SAPGUI ( cmdi_ta_1 ).
SAPGUI ( cmdi_ta_2 ).
SAPGUI ( cmdi_ta_3 ).
In another script:
REF( SOMETHING, CMDI, TARGET_A ).
Works also with TCD, FUN, WEBDYNPRO, ....
Best regards
Jens

How to use FTP_COMMAND to put a file in the target system

Hi All,
I have the requirement to put an excel file from apllication server to another remote system for this i am using the function modules
1) FTP_CONNECT to connect to the sourece as well as the destination systems --- Here i am able to hit the both systems.
2) for sending the data to the target system i am using FTP_COMMAND by passing the 'put' statement along with the soruce and destinations for the command parameter.
See the bellow code
CONCATENATE 'put' v_fname '
' 'wbrs1\' folder
into cmd separated by space.
CALL FUNCTION 'FTP_COMMAND'
EXPORTING
   HANDLE                = dhdl
    command              = cmd
   COMPRESS              = 'N'
VERIFY                =
RFC_DESTINATION       =
IMPORTING
FILESIZE              =
FILEDATE              =
FILETIME              =
tables
    data                  = result
EXCEPTIONS
   TCPIP_ERROR           = 1
   COMMAND_ERROR         = 2
   DATA_ERROR            = 3
   OTHERS                = 4
Here v_name is the file path and name in the application server suppose say :
/usr/sap/TD2/DVEBMGS01/work/TD2_20060901_1008_WAY-LY.XLS
and wbrs1 is the target system and 'Waynesboro DFS' is the folder name i ma passing to the command .
Also I tried with the following statement
CONCATENATE 'put' v_fname '
' dhost folder
into cmd separated by space.
Here v_name is the file path and name in the application server suppose say :
/usr/sap/TD2/DVEBMGS01/work/TD2_20060901_1008_WAY-LY.XLS,
Dhost is wbrs1.wb.na.webdti.com
And Waynesboro DFS is the folder .
Here i am getting the error as invalid argument.
See the bellow messages from result internal table.
put /usr/sap/TD2/DVEBMGS01/work/TD2_20060901_1008_WAY-LY.XLS
wbrs1\ Waynesboro DFS
open /usr/sap/TD2/DVEBMGS01/work/TD2_20060901_1008_WAY-LY.XLS errno 22: Invalid argument
Please let me know how i can resolve this problem and how can I put this file in the destination system.
Thanks in advance.
Regards,
Venkat

check this code....here data is transferred from SAP to Informatica box..
REPORT zfo_phoenix_acc_reconciliation NO STANDARD PAGE HEADING
                                                MESSAGE-ID zz
                                                LINE-SIZE 255
                                                LINE-COUNT 65.
                        PROGRAM DECLARATION
PROGRAM ID            : ZFO_PHOENIX_ACC_RECONCILIATION
DESCRIPTION           : Phoneix Account Reconcilation Program-Feed
                        Balance sheet account balances from GL
                        3 files needed to be enhanced. The files are " Master
              Attribute File" & "Transaction File(GL Balance)". For
              Master Attribute File, data needs to be retrieved from
              T001, ZDATSRC_T, SKA1, T003, T856. The corresponding
              data from all the tables is downloaded into file
              according to the condition specified. For Transaction
              File, data needs to be retrieved from ZGEIST based on
              Ledger(GG), Record Type(0), Fiscal Year, Period(016).
              Then the current period is used to determine which TSLxx
              & KSLxx needs to be used. Also, the conditions are
              specified in specs which have been used accordingly.
              The final data fetched will need to processed as files
              which neednot be downloaded to Presentation/Application
              server. Instead the files are been FTPed to the
              Informatica Server using FTP. The location where the
              files need to be located is ERC\GLOBALSAP.
                     TABLES
TABLES : ADR6.
                     TYPES
Output File - Master COA(Chart of Account)
TYPES : BEGIN OF ty_coacode ,
         coa_code(20),         "COA Code
         coa_description(50), "COA Description
         field11 TYPE x,       "Line Feed
         END OF ty_coacode.
Output File - Master Account
TYPES : BEGIN OF ty_acctcode ,
         act_code(20),         "GL Account Number
         act_desc(60),         "GL Account Description
         act_act_flag(1),      "Account marked for deletion indicator
         glact_type(1),        "GL Account type
         fi_line(20),          "Corporate Financial Statement Line
         coa_code(20),         "COA Code
         act_defcode(3),       "Account Defination Code
         field11 TYPE x,       "Line Feed
       END OF ty_acctcode.
Output File - Master Entity
TYPES : BEGIN OF ty_entitycode,
         entity_code(12),     "Entity Code
         com_desc(40),        "Company Name
         coa_code(20),        "COA Code
         field11 TYPE x,      "Line Feed
        END OF ty_entitycode.
Output File - Master Attribute
TYPES : BEGIN OF ty_attribcode,
         attrib_code(5),       "Attribute Code
         attrib_value(20),     "Attribute Value
         attrib_desc(60),      "Attribute Description
         field11 TYPE x,       "Line Feed
        END OF ty_attribcode.
Output File - Transaction GL Balance
TYPES : BEGIN OF ty_glbal,
         gl_reccode(2),        "GL Reconciliation Code
         gl_entity(12),        "GL Entity - Company Code
         gl_accnum(20),        "Gl Group Account Number
         site(4),              "Site
         currency_type(6),     "Transaction Currency Code
         year(4) TYPE n,       "Year
         month(2) TYPE n,      "Month
         as_of_date(8),        "Date Account Balance
         tran_cur_amt(21),     "Transaction Currency Amount
         usd_amount(21),       "USD Amount
         racct(20),            "GL Account Number
         zzbewar(20),          "Consolidation Transaction Type
         zzdatsrc(20),         "Data Source
         zzblart(20),          "Document Type
         rassc(20),          "Trading Partner
         field1(20),           "Attribute field1
         field2(20),           "Attribute field2
         field3(20),           "Attribute field3
         field4(20),           "Attribute field4
         field5(20),           "Attribute field5
         field11 TYPE x,       "Line Feed
       END OF ty_glbal.
Output File - Control
TYPES :BEGIN OF ty_globalsap,
        clnt_name(6),          "Client Name
        source_name(12),       "Source Name
        as_of_date(8),         "AS of Date
        time_stamp(6),         "Time Stamp
        time_zone(8),          "Time Zone
        num_of_files(3),       "Number of Files
        num_of_records(9),     "Number of Records
        user_ids(60),          "User ID(s)
        field11 TYPE x,        "Line Feed
       END OF ty_globalsap.
Int'table to hold ZGEIST Data
TYPES : BEGIN OF ty_zgeist_data,
          rldnr    TYPE rldnr,      "Ledger
          rrcty    TYPE rrcty,      "Record Type
          rvers    TYPE rvers,      "Version
          ryear    TYPE gjahr,      "Fiscal Year
          rbukrs   TYPE bukrs,      "Company Code
          racct    TYPE racct,      "Account Number
          robjnr   TYPE gobjnr_r,   "Object Number for objects
          cobjnr   TYPE gobjnr_c,   "Object Number for transaction
          sobjnr   TYPE gobjnr_s,   "Object Number for partner
          rtcur    TYPE rtcur,      "Currency Key
          runit    TYPE meins,      "Base Unit of Measure
          drcrk    TYPE shkzg,      "Debit/Credit Indicator
          rpmax    TYPE rpmax,      "Period
          rzzstagr TYPE stagr,      "Statistical key figure
          zzaltkt TYPE altkt,      "Account Number in Group
          zzdatsrc TYPE zdatsrc,    "Data Source code
          zzbewar TYPE rmvct,      "Transaction Type
          zzblart TYPE blart,      "Document Type
          rassc    TYPE rassc,       "Trading Partner
          zzvbund TYPE rassc,      "Trading Partner
          tslvt    TYPE tslvt9,     "Transactional Currency
          kslvt    TYPE kslvt9,     "Group Currency
        END   OF ty_zgeist_data.
Int'table to hold ZGEIST Error Data based on conditions
TYPES : BEGIN OF ty_zgeist_error_data,
          rldnr    TYPE rldnr,      "Ledger
          rrcty    TYPE rrcty,      "Record Type
          rvers    TYPE rvers,      "Version
          ryear    TYPE gjahr,      "Fiscal Year
          rbukrs   TYPE bukrs,      "Company Code
          robjnr   TYPE gobjnr_r,   "Object Number for objects
          cobjnr   TYPE gobjnr_c,   "Object Number for transaction
          sobjnr   TYPE gobjnr_s,   "Object Number for partner
          rtcur    TYPE rtcur,      "Currency Key
          runit    TYPE meins,      "Base Unit of Measure
          drcrk    TYPE shkzg,      "Debit/Credit indicator
          rpmax    TYPE rpmax,      "Period
        END   OF ty_zgeist_error_data.
                     FIELD SYMBOLS
FIELD-SYMBOLS : <fs> TYPE ANY.
                     CONSTANTS
DATA : c_selected    TYPE c VALUE 'X', "Field for constant value 'X'
       c_y           TYPE c VALUE 'Y', "For Acc marked for deletion
       c_n           TYPE c VALUE 'N', "For Acc not marked for deletion
       c_a           TYPE c VALUE 'A', "For GL Account type Asset
       c_l           TYPE c VALUE 'L', "For GL Account type Liability
       c_q           TYPE c VALUE 'Q', "For GL Account type Equity
       c_r           TYPE c VALUE 'R', "For GL Account type Revenue
       c_e           TYPE c VALUE 'E', "For GL Account type Expense
       c_t           TYPE c VALUE 'T', "For GL Account type
       c_userid(60) TYPE c ,
       c_curtp       TYPE curtp VALUE '10', "Currency type
       c_curtp1      TYPE curtp VALUE '30', "Currency type
       c_rassc(5)    TYPE c VALUE 'RASSC', "Trading Partner
       c_dtsrce(6)   TYPE c VALUE 'DTSRC', "Data Source
       c_sacct(5)    TYPE c VALUE 'SACCT', "GL Account
       c_docty(5)    TYPE c VALUE 'DOCTY', "Document Type
       c_trxtp(5)    TYPE c VALUE 'TRXTP', "Transaction Type
       c_tradptn(15) TYPE c VALUE 'Trading Partner', "Trading Partner
       c_datsrc(11) TYPE c VALUE 'Data Source',      "Data Source
       c_glacc(10)   TYPE c VALUE 'GL Account',       "GL Account
       c_doctyp(13) TYPE c VALUE 'Document Type',    "Document Type
       c_trantyp(16) TYPE c VALUE 'Transaction Type'. "Transaction Type
                     DATA (Simple Fields)
DATA: w_cnt1         TYPE i, "No Of records in output file COA Code
      w_cnt2         TYPE i, "No Of records in output file Account
      w_cnt3         TYPE i, "No Of records in output file Entity
      w_cnt4         TYPE i, "No Of records in output file attribute
      w_cnt5         TYPE i, "No Of records in output file GL Balance
      w_tot_recs     TYPE i, "TOtal number of records downloaded
      w_date         LIKE sy-datum, "System date
      w_timediff     LIKE sy-uzeit, "Time Difference to GMT
      w_timezone(10) TYPE c,       "Time Difference to GMT
      w_file_count(3) TYPE n,       "File Count
      w_period TYPE poper,          "To hold Period Value
      w_year LIKE t009b-bdatj,      "To hold Fiscal Year Value
      w_outfile       TYPE char64, "FTPed file path
      w_hdl           TYPE i.       "Handle for FTP
                     INTERNAL TABLES
Intenal table for GL Account details
DATA: BEGIN OF it_gl_detail OCCURS 0,
          saknr      TYPE saknr,
          txt50_skat TYPE txt50_skat,
          xloev      TYPE xloev,
      END OF it_gl_detail.
DATA: it_company_list LIKE bapi0014_1 OCCURS 0 WITH HEADER LINE,
      it_coacode TYPE STANDARD TABLE OF ty_coacode WITH HEADER LINE,
      it_acctcode TYPE STANDARD TABLE OF ty_acctcode WITH HEADER LINE,
      it_entitycode TYPE STANDARD TABLE OF ty_entitycode
                                        WITH HEADER LINE,
      it_attribcode TYPE STANDARD TABLE OF ty_attribcode
                                        WITH HEADER LINE,
      it_glbal TYPE STANDARD TABLE OF ty_glbal WITH HEADER LINE,
      it_globalsap TYPE STANDARD TABLE OF ty_globalsap WITH HEADER LINE,
      it_t001 TYPE STANDARD TABLE OF t001 WITH HEADER LINE,
      it_zdatsrc TYPE STANDARD TABLE OF zdatsrc_t WITH HEADER LINE,
      it_ska1 TYPE STANDARD TABLE OF ska1 WITH HEADER LINE,
      it_t003 TYPE STANDARD TABLE OF t003 WITH HEADER LINE,
      it_t856 TYPE STANDARD TABLE OF t856 WITH HEADER LINE,
      it_zgeist_data    TYPE STANDARD TABLE OF ty_zgeist_data
                             WITH HEADER LINE,
      it_zgeist_data1   TYPE STANDARD TABLE OF ty_zgeist_data
                             WITH HEADER LINE,
      it_zgeist_data_all TYPE STANDARD TABLE OF zgeist,
      wa_it_zgeist_data1 TYPE ty_zgeist_data,
      wa_it_zgeist_data TYPE zgeist,
      it_zgeist_error_data TYPE STANDARD TABLE OF ty_zgeist_error_data,
      wa_it_zgeist_error_data TYPE ty_zgeist_error_data.
                     SELECTION-SCREEN
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-009.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-006,
            POSITION POS_LOW.
PARAMETERS :       P_USER(30) TYPE C LOWER CASE OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-007,
            POSITION POS_LOW.
PARAMETERS :       P_PWD(30) TYPE C LOWER CASE OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-008,
            POSITION POS_LOW.
PARAMETERS :       P_HOST(64) TYPE C LOWER CASE OBLIGATORY.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN : BEGIN OF LINE,
            COMMENT 1(30) TEXT-010,
            POSITION POS_LOW.
SELECT-OPTIONS :   S_EMAIL FOR ADR6-SMTP_ADDR NO INTERVALS.
SELECTION-SCREEN : END OF LINE.
SELECTION-SCREEN END OF BLOCK B1.
-- Password not visible--
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF screen-name = 'P_PWD'.
      screen-invisible = '1'.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
I N I T I A L I Z A T I O N                                         *
INITIALIZATION.
w_date0(2) = sy-datum4(2).
w_date2(2) = sy-datum6(2).
w_date4(4) = sy-datum0(4).
S_EMAIL-SIGN = 'I'.
S_EMAIL-OPTION = 'EQ'.
S_EMAIL-LOW = '[email protected]'.
APPEND S_EMAIL.
S_EMAIL-SIGN = 'I'.
S_EMAIL-OPTION = 'EQ'.
S_EMAIL-LOW = '[email protected]'.
APPEND S_EMAIL.
                     START - OF - SELECTION
START-OF-SELECTION.
Geting Company Details
PERFORM get_company_list.
Geting GL Account Details
PERFORM get_gl_acc_detail.
Geting GL Balance Details
PERFORM get_zgeist_data.
                     END - OF - SELECTION
PERFORM process_coacode.
PERFORM process_acctcode.
PERFORM process_entitycode.
PERFORM process_attribcode.
PERFORM process_glbal.
PERFORM process_ftp_file.
IF NOT it_zgeist_error_data[] IS INITIAL.
    PERFORM write_error_report.
ENDIF.
*&      Form GET_COMPANY_LIST
           Form to get Company List                                 *
FORM get_company_list.
CALL FUNCTION 'BAPI_COMPANY_GETLIST'
    TABLES
      company_list = it_company_list.
ENDFORM.                    "GET_COMPANY_LIST
*&      Form GET_GL_ACC_DETAIL
      Form to get the GL Account details                            *
FORM get_gl_acc_detail.
DATA : l_txt50 LIKE skat-txt50,
         l_tabix LIKE sy-tabix.
SELECT saknr xloev
    INTO TABLE it_gl_detail
    FROM ska1
    WHERE ktopl = 'G001'
    AND   ( saknr GE '1000000000' AND saknr LE '4500000000' ).
LOOP AT it_gl_detail.
    l_tabix = sy-tabix.
    SELECT SINGLE txt50
      INTO l_txt50
      FROM skat
      WHERE spras = 'EN'
      AND   ktopl = 'G001'
      AND   saknr = it_gl_detail-saknr.
    it_gl_detail-txt50_skat = l_txt50.
    MODIFY it_gl_detail INDEX l_tabix.
    CLEAR l_txt50.
ENDLOOP.
ENDFORM.                    "GET_GL_ACC_DETAIL
*&      Form PROCESS_COACODE
Form to Populate COA data to Output internal table IT_COACODE *
FORM process_coacode.
it_coacode-coa_code          = text-023.     "GLOBAL.
it_coacode-coa_description   = text-022.     "Global SAP for ERC
it_coacode-field11           = '11'.
APPEND it_coacode.
CLEAR it_coacode.
ENDFORM.                    "PROCESS_COACODE
*&      Form PROCESS_ACCTCODE
Form to Populate Account data to Output Internal table IT_ACCTCODE *
FORM process_acctcode.
DATA:l_saknr(10).
DATA : it_gl_detail2 LIKE it_gl_detail OCCURS 0 WITH HEADER LINE.
IF NOT it_gl_detail[] IS INITIAL.
    it_gl_detail2[] = it_gl_detail[].
    SORT it_gl_detail2 BY saknr.
    DELETE ADJACENT DUPLICATES FROM it_gl_detail2 COMPARING saknr.
ENDIF.
IF NOT it_gl_detail2[] IS INITIAL.
    LOOP AT it_gl_detail2.
      MOVE it_gl_detail2-saknr      TO it_acctcode-act_code.
      MOVE it_gl_detail2-txt50_skat TO it_acctcode-act_desc.
Check GL Account is marked for deletion or not
      IF it_gl_detail2-xloev     = c_selected.
        it_acctcode-act_act_flag = c_n.
      ELSE.
        it_acctcode-act_act_flag = c_y.
      ENDIF.
Determine GL Account type based on GL account number
      l_saknr = it_gl_detail2-saknr.
      SHIFT l_saknr LEFT DELETING LEADING '0'.
      IF l_saknr CP '1*'.
        it_acctcode-glact_type = c_a.
      ELSEIF l_saknr CP '2*'.
        it_acctcode-glact_type = c_l.
      ELSEIF l_saknr CP '3*'.
        it_acctcode-glact_type = c_q.
Start of Addition by C.Ramesh Babu on 11/04/2005   "DR1K907900
      ELSEIF l_saknr CP '4*'.
        it_acctcode-glact_type = c_l.
End of Addition by C.Ramesh Babu on 11/04/2005   "DR1K907900
      ELSEIF l_saknr CP '5*'.
        it_acctcode-glact_type = c_r.
      ELSEIF l_saknr CP '6*'.
        it_acctcode-glact_type = c_e.
      ELSEIF l_saknr CP '7*'.
        it_acctcode-glact_type = c_t.
      ENDIF.
      it_acctcode-fi_line      = 'CDR'.
      it_acctcode-coa_code     = 'GLOBAL'.
      it_acctcode-act_defcode = '001'.
      it_acctcode-field11      = '11'.
      APPEND :it_acctcode.
      CLEAR :it_acctcode,it_gl_detail2.
    ENDLOOP.
ENDIF.
ENDFORM.                    "PROCESS_ACCTCODE
*&      Form PROCESS_ENTITYCODE
Form to Populate Entiti data to Output file internal table        *
FORM process_entitycode.
IF NOT it_company_list[] IS INITIAL.
    LOOP AT it_company_list.
      SHIFT it_company_list-company LEFT DELETING LEADING '0'.
      MOVE it_company_list-company TO it_entitycode-entity_code.
      MOVE it_company_list-name1   TO it_entitycode-com_desc.
      it_entitycode-coa_code    = 'GLOBAL'.
      it_entitycode-field11     = '11'.
      APPEND it_entitycode.
      CLEAR : it_company_list,it_entitycode.
    ENDLOOP.
ENDIF.
ENDFORM.                    "PROCESS_ENTITYCODE
*&      Form PROCESS_ATTRIBCODE
    Form to Populate Attribute data to output file internal table   *
FORM process_attribcode.
Getting data from T001.
SELECT * FROM t001 INTO TABLE it_t001.
LOOP AT it_t001.
    MOVE c_rassc TO it_attribcode-attrib_code.
    MOVE it_t001-bukrs TO it_attribcode-attrib_value.
    MOVE c_tradptn TO it_attribcode-attrib_desc.
    it_attribcode-field11 = '11'.
    APPEND it_attribcode.
    CLEAR it_attribcode.
ENDLOOP.
Getting data from table ZDATSRC_T.
SELECT * FROM zdatsrc_t INTO TABLE it_zdatsrc.
LOOP AT it_zdatsrc.
    MOVE c_dtsrce TO it_attribcode-attrib_code.
    MOVE it_zdatsrc-zdatsrc TO it_attribcode-attrib_value.
    MOVE c_datsrc TO it_attribcode-attrib_desc.
    it_attribcode-field11 = '11'.
    APPEND it_attribcode.
    CLEAR it_attribcode.
ENDLOOP.
Getting data from table SKA1.
SELECT * FROM ska1 INTO TABLE it_ska1.
LOOP AT it_ska1.
    MOVE c_sacct TO it_attribcode-attrib_code.
    MOVE it_ska1-saknr TO it_attribcode-attrib_value.
    MOVE c_glacc TO it_attribcode-attrib_desc.
    it_attribcode-field11 = '11'.
    APPEND it_attribcode.
    CLEAR it_attribcode.
ENDLOOP.
Getting data from table T003.
SELECT * FROM t003 INTO TABLE it_t003.
LOOP AT it_t003.
    MOVE c_docty TO it_attribcode-attrib_code.
    MOVE it_t003-blart TO it_attribcode-attrib_value.
    MOVE c_doctyp TO it_attribcode-attrib_desc.
    it_attribcode-field11 = '11'.
    APPEND it_attribcode.
    CLEAR it_attribcode.
ENDLOOP.
Getting data from table T856.
SELECT * FROM t856 INTO TABLE it_t856.
LOOP AT it_t856.
    MOVE c_trxtp TO it_attribcode-attrib_code.
    MOVE it_t856-trtyp TO it_attribcode-attrib_value.
    MOVE c_trantyp TO it_attribcode-attrib_desc.
    it_attribcode-field11 = '11'.
    APPEND it_attribcode.
    CLEAR it_attribcode.
ENDLOOP.
ENDFORM.                    "PROCESS_ATTRIBCODE
*&      Form PROCESS_GLBAL
Form to Populate GL Balance data to Output file internal table    *
FORM process_glbal.
DATA : l_ctran_amt(21),
         l_cusd_amt(21).
LOOP AT it_zgeist_data INTO wa_it_zgeist_data1.
*Start of change by 501030559 on 11/04/2005
   it_glbal-gl_reccode = '04'.
     it_glbal-gl_reccode = '05'.
*End of change by 501030559 on11/04/2005
    it_glbal-gl_entity = wa_it_zgeist_data1-rbukrs.
    it_glbal-gl_accnum = wa_it_zgeist_data1-zzaltkt.
    it_glbal-site       = 'ERC'.
    it_glbal-currency_type = wa_it_zgeist_data1-rtcur.
    it_glbal-year = w_year.
    it_glbal-month = w_period.
    it_glbal-as_of_date = w_date.
    l_ctran_amt = wa_it_zgeist_data1-tslvt.
Put sign to left side of the value
    IF l_ctran_amt LT 0.
      TRANSLATE l_ctran_amt USING ' 0'.
      CALL FUNCTION 'CLOI_PUT_SIGN_IN_FRONT'
        CHANGING
          value = l_ctran_amt.
    ELSE.
Trailing Zero's to the value
      SHIFT l_ctran_amt RIGHT DELETING TRAILING space.
      TRANSLATE l_ctran_amt USING ' 0'.
      REPLACE '0' WITH '' INTO l_ctran_amt.
    ENDIF.
    it_glbal-tran_cur_amt = l_ctran_amt.
    l_cusd_amt = wa_it_zgeist_data1-kslvt.
Put Sign to leftside of the value
    IF l_cusd_amt LT 0.
      TRANSLATE l_cusd_amt USING ' 0'.
      CALL FUNCTION 'CLOI_PUT_SIGN_IN_FRONT'
        CHANGING
          value = l_cusd_amt.
    ELSE.
Trailing Zero's to the value
      SHIFT l_cusd_amt RIGHT DELETING TRAILING space.
      TRANSLATE l_cusd_amt USING ' 0'.
      REPLACE '0' WITH '' INTO l_cusd_amt.
    ENDIF.
    it_glbal-usd_amount = l_cusd_amt.
    it_glbal-racct   = wa_it_zgeist_data1-racct.
    it_glbal-zzbewar = wa_it_zgeist_data1-zzbewar.
    it_glbal-zzdatsrc = wa_it_zgeist_data1-zzdatsrc.
    it_glbal-zzblart = wa_it_zgeist_data1-zzblart.
    it_glbal-rassc = wa_it_zgeist_data1-rassc.
    it_glbal-field11 = '11'.
    APPEND it_glbal.
    CLEAR : wa_it_zgeist_data1, it_glbal.
ENDLOOP.
ENDFORM.                    "PROCESS_GLBAL
*&      Form PROCESS_GLOBALSAP
   Form to Populate COntrol data to Output file internal table      *
FORM process_globalsap.
DATA :l_total(9),
        l_len(3) type c.
Logic to get Time Zone
w_timediff = sy-tzone.
IF sy-tzone LT '0'.
    w_timediff = sy-tzone * -1.
    CONCATENATE 'GMT-' w_timediff(4) INTO w_timezone.
ELSE.
    w_timediff = sy-tzone.
    CONCATENATE 'GMT+' w_timediff(4) INTO w_timezone.
ENDIF.
LOOP AT S_EMAIL.
    CONCATENATE C_USERID S_EMAIL-LOW ',' INTO C_USERID.
ENDLOOP.
l_len = strlen( c_userid ).
l_len = l_len - 1.
c_userid = c_userid+0(l_len).
it_globalsap-clnt_name    = 'ERC'.
it_globalsap-source_name = 'GLOBALSAP'.
it_globalsap-as_of_date   = w_date.
it_globalsap-time_stamp   = sy-uzeit.
it_globalsap-time_zone    = w_timezone.
it_globalsap-num_of_files = w_file_count.
MOVE w_tot_recs TO l_total.
SHIFT l_total RIGHT DELETING TRAILING space.
TRANSLATE l_total USING ' 0'.
it_globalsap-num_of_records = l_total.
it_globalsap-user_ids = c_userid.
it_globalsap-field11 = '11'.
APPEND it_globalsap.
CLEAR it_globalsap.
ENDFORM.                  "PROCESS_GLOBALSAP
*&      Form COUNT_RECORDS
Form to count total number of records Downlaoded                   *
FORM count_records.
DESCRIBE TABLE it_coacode    LINES w_cnt1.
DESCRIBE TABLE it_acctcode   LINES w_cnt2.
DESCRIBE TABLE it_entitycode LINES w_cnt3.
DESCRIBE TABLE it_attribcode LINES w_cnt4.
DESCRIBE TABLE it_glbal      LINES w_cnt5.
w_tot_recs = w_cnt1 + w_cnt2 + w_cnt3 + w_cnt4 + w_cnt5.
ENDFORM.                    "COUNT_RECORDS
*&      Form get_zgeist_data
Form used to fetch data from ZGEIST table for the GL BAL file
FORM get_zgeist_data .
PERFORM get_period_year.
SELECT * INTO TABLE it_zgeist_data_all
           FROM zgeist
           WHERE rldnr EQ 'GG'
           AND   ryear EQ w_year
           AND   rrcty EQ 0
           AND   rpmax EQ '016'
           AND ( zzaltkt GE '1000000000' AND zzaltkt LE '4500000000' )
           AND   rzzstagr = space.
sort it_zgeist_data_all by rbukrs rldnr zzaltkt racct
                             zzdatsrc zzbewar zzblart rtcur rassc.
LOOP AT it_zgeist_data_all INTO wa_it_zgeist_data.
    IF wa_it_zgeist_data-zzaltkt EQ space.
      wa_it_zgeist_error_data-rldnr = wa_it_zgeist_data-rldnr.
      wa_it_zgeist_error_data-rrcty = wa_it_zgeist_data-rrcty.
      wa_it_zgeist_error_data-rvers = wa_it_zgeist_data-rvers.
      wa_it_zgeist_error_data-ryear = wa_it_zgeist_data-ryear.
      wa_it_zgeist_error_data-rbukrs = wa_it_zgeist_data-rbukrs.
      wa_it_zgeist_error_data-robjnr = wa_it_zgeist_data-robjnr.
      wa_it_zgeist_error_data-cobjnr = wa_it_zgeist_data-cobjnr.
      wa_it_zgeist_error_data-sobjnr = wa_it_zgeist_data-sobjnr.
      wa_it_zgeist_error_data-rtcur = wa_it_zgeist_data-rtcur.
      wa_it_zgeist_error_data-runit = wa_it_zgeist_data-runit.
      wa_it_zgeist_error_data-drcrk = wa_it_zgeist_data-drcrk.
      wa_it_zgeist_error_data-rpmax = wa_it_zgeist_data-rpmax.
      APPEND wa_it_zgeist_error_data TO it_zgeist_error_data.
    ELSE.
      it_zgeist_data1-rbukrs   = wa_it_zgeist_data-rbukrs.
      it_zgeist_data1-rldnr    = wa_it_zgeist_data-rldnr.
      it_zgeist_data1-zzaltkt = wa_it_zgeist_data-zzaltkt.
      it_zgeist_data1-racct    = wa_it_zgeist_data-racct.
      it_zgeist_data1-zzdatsrc = wa_it_zgeist_data-zzdatsrc.
      it_zgeist_data1-zzbewar = wa_it_zgeist_data-zzbewar.
      it_zgeist_data1-zzblart = wa_it_zgeist_data-zzblart.
      it_zgeist_data1-rassc = wa_it_zgeist_data-rassc.
      it_zgeist_data1-rtcur    = wa_it_zgeist_data-rtcur.
      PERFORM get_tslvt_kslvt_values USING w_period.
      COLLECT it_zgeist_data1.
    ENDIF.
    CLEAR : wa_it_zgeist_data, wa_it_zgeist_error_data,
            it_zgeist_data1.
ENDLOOP.
it_zgeist_data[] = it_zgeist_data1[].
ENDFORM.                    " get_zgeist_data
*&      Form write_error_report
Form used to display error data for the GL BAL fetched data
FORM write_error_report .
DATA : l_text(80) TYPE c.
CASE w_period.
    WHEN '001' OR '01'.
      l_text = text-e01.
    WHEN '002' OR '02'.
      l_text = text-e02.
    WHEN '003' OR '03'.
      l_text = text-e03.
    WHEN '004' OR '04'.
      l_text = text-e04.
    WHEN '005' OR '05'.
      l_text = text-e05.
    WHEN '006' OR '06'.
      l_text = text-e06.
    WHEN '007' OR '07'.
      l_text = text-e07.
    WHEN '008' OR '08'.
      l_text = text-e08.
    WHEN '009' OR '09'.
      l_text = text-e09.
    WHEN '010' OR '10'.
      l_text = text-e10.
    WHEN '011' OR '11'.
      l_text = text-e11.
    WHEN '012' OR '12'.
      l_text = text-e12.
    WHEN '013' OR '13'.
      l_text = text-e13.
    WHEN '014' OR '14'.
      l_text = text-e14.
    WHEN '015' OR '15'.
      l_text = text-e15.
    WHEN '016' OR '16'.
      l_text = text-e16.
ENDCASE.
SKIP 2.
WRITE:/45 text-h01 COLOR COL_HEADING.
SKIP 2.
FORMAT COLOR 4.
WRITE:/(234) sy-uline.
WRITE:/1   sy-vline,
         2   text-h02,
         9   sy-vline,
         10 text-h03,
         19 sy-vline,
         20 text-h04,
         28 sy-vline,
         29 text-h05,
         41 sy-vline,
         42 text-h06,
         49 sy-vline,
         50 text-h07,
         69 sy-vline,
         70 text-h08,
         89 sy-vline,
         90 text-h09,
         109 sy-vline,
         110 text-h10,
         119 sy-vline,
         120 text-h11,
         130 sy-vline,
         131 text-h12,
         144 sy-vline,
         145 text-h13,
         152 sy-vline,
         153 text-h14,
         234 sy-vline.
WRITE:/(234) sy-uline.
FORMAT COLOR OFF.
LOOP AT it_zgeist_error_data INTO wa_it_zgeist_error_data.
    FORMAT COLOR 2.
    WRITE:/1   sy-vline,
           4   wa_it_zgeist_error_data-rldnr,
           9   sy-vline,
           13 wa_it_zgeist_error_data-rrcty,
           19 sy-vline,
           22 wa_it_zgeist_error_data-rvers,
           28 sy-vline,
           32 wa_it_zgeist_error_data-ryear,
           41 sy-vline,
           42 wa_it_zgeist_error_data-rbukrs,
           49 sy-vline,
           50 wa_it_zgeist_error_data-robjnr,
           69 sy-vline,
           70 wa_it_zgeist_error_data-cobjnr,
           89 sy-vline,
           90 wa_it_zgeist_error_data-sobjnr,
           109 sy-vline,
           112 wa_it_zgeist_error_data-rtcur,
           119 sy-vline,
           123 wa_it_zgeist_error_data-runit,
           130 sy-vline,
           135 wa_it_zgeist_error_data-drcrk,
           144 sy-vline,
           147 wa_it_zgeist_error_data-rpmax,
           152 sy-vline,
           153 l_text,
           234 sy-vline.
    FORMAT COLOR OFF.
ENDLOOP.
WRITE:/(234) sy-uline.
ENDFORM.                    " write_error_report
*&      Form get_tslvt_kslvt_values
Form used to get TSLxx & KSLxx values for the period fetched
FORM get_tslvt_kslvt_values USING period.
FIELD-SYMBOLS : <f1> TYPE ANY,
                 <f2> TYPE ANY.
DATA : l_tslvt_val(25) VALUE 'wa_it_zgeist_data-tsl',
        l_kslvt_val(25) VALUE 'wa_it_zgeist_data-ksl',
        l_tslvt TYPE tslvt9,
        l_kslvt TYPE kslvt9,
        l_period TYPE poper.
clear l_period.
l_period = period.
DO l_period TIMES.
      CONCATENATE l_tslvt_val l_period+1(2) INTO l_tslvt_val.
      CONCATENATE   l_kslvt_val l_period+1(2) INTO l_kslvt_val.
    ASSIGN (l_tslvt_val) TO <f1>.
    l_tslvt = <f1>.
    it_zgeist_data1-tslvt = it_zgeist_data1-tslvt + l_tslvt.
    ASSIGN (l_kslvt_val) TO <f2>.
    l_kslvt = <f2>.
    it_zgeist_data1-kslvt = it_zgeist_data1-kslvt + l_kslvt.
    l_period = l_period - 1.
    clear : l_tslvt, l_kslvt, l_tslvt_val, l_kslvt_val.
    l_tslvt_val = 'wa_it_zgeist_data-tsl'.
    l_kslvt_val = 'wa_it_zgeist_data-ksl'.
    if l_period = 0.
      exit.
    endif.
ENDDO.
ENDFORM.                    "get_tslvt_kslvt_values
*&      Form process_ftp_file
Form used to connect & disconnect to Informatica Server using FTP
Also, used to transfer files to the Informatica location
--> p1        text
<-- p2        text
FORM process_ftp_file .
DATA: l_slen     TYPE i,
        l_error,
        l_pwd(30) TYPE c.
CONSTANTS: c_dest TYPE rfcdes-rfcdest VALUE 'SAPFTP',
             c_key TYPE i              VALUE 26101957.
l_error = 0.
connect to ftp server
l_pwd = p_pwd.
l_slen = STRLEN( l_pwd ).
CALL FUNCTION 'HTTP_SCRAMBLE'
    EXPORTING
      SOURCE      = l_pwd
      sourcelen   = l_slen
      key         = c_key
    IMPORTING
      destination = l_pwd.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
    EXPORTING
      text = 'Connect to FTP Server'.
To Connect to the Server using FTP
CALL FUNCTION 'FTP_CONNECT'
    EXPORTING
      user            = p_user
      password        = l_pwd
      host            = p_host
      rfc_destination = c_dest
    IMPORTING
      handle          = w_hdl
    EXCEPTIONS
      OTHERS          = 1.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
               WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CLEAR : w_outfile, w_file_count.
MOVE 'ERC/GLOBALSAP/M_ERC_GLOBALSAP_COACODE' TO w_outfile.
PERFORM download_to_ftp TABLES it_coacode USING w_outfile.
w_file_count = w_file_count + 1.
CLEAR : w_outfile.
MOVE 'ERC/GLOBALSAP/M_ERC_GLOBALSAP_ACCTCODE' TO w_outfile.
PERFORM download_to_ftp TABLES it_acctcode USING w_outfile.
w_file_count = w_file_count + 1.
CLEAR : w_outfile.
MOVE 'ERC/GLOBALSAP/M_ERC_GLOBALSAP_ENTITYCODE' TO w_outfile.
PERFORM download_to_ftp TABLES it_entitycode USING w_outfile.
w_file_count = w_file_count + 1.
CLEAR : w_outfile.
MOVE 'ERC/GLOBALSAP/M_ERC_GLOBALSAP_ATTRIBCODE' TO w_outfile.
PERFORM download_to_ftp TABLES it_attribcode USING w_outfile.
w_file_count = w_file_count + 1.
CLEAR : w_outfile.
MOVE 'ERC/GLOBALSAP/ERC_GLOBALSAP_GLBAL' TO w_outfile.
PERFORM download_to_ftp TABLES it_glbal USING w_outfile.
w_file_count = w_file_count + 1.
CLEAR : w_outfile, w_tot_recs.
PERFORM count_records.
PERFORM process_globalsap.
MOVE 'ERC/GLOBALSAP/C_ERC_GLOBALSAP' TO w_outfile.
PERFORM download_to_ftp TABLES it_globalsap USING w_outfile.
To disconnect the FTP
CALL FUNCTION 'FTP_DISCONNECT'
    EXPORTING
      handle = w_hdl.
To disconnect the RFC Connection
CALL FUNCTION 'RFC_CONNECTION_CLOSE'
    EXPORTING
      destination = c_dest
    EXCEPTIONS
      OTHERS      = 1.
ENDFORM.                    " process_ftp_file
*&      Form download_to_ftp
Form to put the files in the Informatica Location using FTP
Path is ERC\GLOBALSAP\<filename>
FORM download_to_ftp TABLES it_tab
                     USING l_string TYPE char64.
CALL FUNCTION 'FTP_R3_TO_SERVER'
    EXPORTING
      handle         = w_hdl
      fname          = l_string
      character_mode = 'X'
    TABLES
      text           = it_tab[]
    EXCEPTIONS
      tcpip_error    = 1
      command_error = 2
      data_error     = 3
      OTHERS         = 4.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
            RAISING invalid_output_file.
ENDIF.
ENDFORM.                    " download_to_ftp
*&      Form get_period_year
Form to fill the Period & Year based on the Sy-datum
FORM get_period_year .
DATA : l_month(2) TYPE c,
         l_day(2)   TYPE c,
         l_year(4) TYPE c.
l_year = sy-datum+0(4).
l_month = sy-datum+4(2).
l_day   = sy-datum+6(2).
CASE l_month.
    WHEN '01'.
      IF l_day <= '15'.
        w_period = '12'.
        w_year = l_year - 1.
      ELSE.
        w_period = '1'.
        w_year = l_year.
      ENDIF.
    WHEN '02'.
      IF l_day <= '15'.
        w_period = '1'.
        w_year = l_year.
      ELSE.
        w_period = '2'.
        w_year = l_year.
      ENDIF.
    WHEN '03'.
      IF l_day <= '15'.
        w_period = '2'.
        w_year = l_year.
      ELSE.
        w_period = '3'.
        w_year = l_year.
      ENDIF.
    WHEN '04'.
      IF l_day <= '15'.
        w_period = '3'.
        w_year = l_year.
      ELSE.
        w_period = '4'.
        w_year = l_year.
      ENDIF.
    WHEN '05'.
      IF l_day <= '15'.
        w_period = '4'.
        w_year = l_year.
      ELSE.
        w_period = '5'.
        w_year = l_year.
      ENDIF.
    WHEN '06'.
      IF l_day <= '15'.
        w_period = '5'.
        w_year = l_year.
      ELSE.
        w_period = '6'.
        w_year = l_year.
      ENDIF.
    WHEN '07'.
      IF l_day <= '15'.
        w_period = '6'.
        w_year = l_year.
      ELSE.
        w_period = '7'.
        w_year = l_year.
      ENDIF.
    WHEN '08'.
      IF l_day <= '15'.
        w_period = '7'.
        w_year = l_year.
      ELSE.
        w_period = '8'.
        w_year = l_year.
      ENDIF.
    WHEN '09'.
      IF l_day <= '15'.
        w_period = '8'.
        w_year = l_year.
      ELSE.
        w_period = '9'.
        w_year = l_year.
      ENDIF.
    WHEN '10'.
      IF l_day <= '15'.
        w_period = '9'.
        w_year = l_year.
      ELSE.
        w_period = '10'.
        w_year = l_year.
      ENDIF.
    WHEN '11'.
      IF l_day <= '15'.
        w_period = '10'.
        w_year = l_year.
      ELSE.
        w_period = '11'.
        w_year = l_year.
      ENDIF.
    WHEN '12'.
      IF l_day <= '15'.
        w_period = '11'.
        w_year = l_year.
      ELSE.
        w_period = '12'.
        w_year = l_year.
      ENDIF.
ENDCASE.
ENDFORM.                    " get_period_year

Identifying the target system using FM extraction in a Generic Datasource

Hi all,
We are using a Generic datasource using FM for extraction from R/3 system to BW system. This Function module picks data from a Z table! After each successful delta extraction from the table, a flag field is set to identify whether the data is pulled or not.
We are about to use BO data services which is connected to the R/3 system to fetch data. For capturing delta records after the BW run has happened, the table can be added a new flag field to pull delta for Data services.
Is there any way to identify which target system's extraction is running particularly in the function module (for e.g., if BW extraction is triggered or BODS extraction is triggered) so as to set the respective target flag in the Z table?
Regards,
vivek

Leandro,
The calling program of your FM should have a local variable I_RLOGSYS which is populated with the BW server ID.
If you don't know how to access a variable in a program that is in call stack using field symbols, search SDN.
I haven't tested this, so you may have to explore a little.
Good luck.

If I use Informatica Big Data Edition do I still need to use Hadoop or MapR or any other similar systems to process data? What all activities will be specific to Informatica BD or Hadoop?

If I use Informatica Big Data Edition do I still need to use Hadoop or MapR or any other similar systems to process data? What all activities will be specific to Informatica BD and Hadoop?1. My query is to process both structured and unstructured data in real time, so is Informatica Big Data Edition suffecient of do I have to use Hadoop or MapR or Cloudera etc to process data. If so then what all activities will be performed be Informatica and what all activities will require Hadoop.2. Also for scheduling do I need to go for ActiveBatch or I can perform it be native Informatica Scheduler itself?

If I use Informatica Big Data Edition do I still need to use Hadoop or MapR or any other similar systems to process data? What all activities will be specific to Informatica BD and Hadoop?1. My query is to process both structured and unstructured data in real time, so is Informatica Big Data Edition suffecient of do I have to use Hadoop or MapR or Cloudera etc to process data. If so then what all activities will be performed be Informatica and what all activities will require Hadoop.2. Also for scheduling do I need to go for ActiveBatch or I can perform it be native Informatica Scheduler itself?

How to generate a star pattern as output using Informatica

To generate a star pattern using Informatica depending on the number of rows in the input fileSuppose there are 7 rows in the source file (any type of data), the target should have 7 rows of stars in the following pattern:- This was one of the interview questions I was asked.

The drive in which I installed informatica ran out of disc space. So I found this in the error log SF_34125 Error in writing storage file [C:\Informatica\9.0.1\server\infa_shared\Storage\pmservice_Domain_ssintr01_INT_SSINTR01_1314615470_0.dat]. System returns error code [errno = 28], error message [No space left on device]. Then I tried to shut down the integration service and then freeup some space on the disc. I got the following message in the log file LM_36047 Waiting for all running workflows to complete.SF_34014 Service [INT_SSINTR01] on node [node01_ssintr01] shut down. Then when I tried to start the integration service again, I got the following error Could not execute action... The Service INT_SSINTR01 could not be enabled due to the following error: [DOM_10079] Unable to start service [INT_SSINTR01] on any node specified for the service After this I am not able to find any entry in the log file for the integration service. So I went to the domain log to find out more details. I found these in the domain log DOM_10126 Request to disable [SERVICE] [INT_SSINTR01] in [COMPLETE] mode.DOM_10130 Stop service process for [SERVICE] [INT_SSINTR01] on node [node01_ssintr01].LIC_10040 Service [INT_SSINTR01] is stopping on node [node01_ssintr01].SPC_10015 Request to stop process for service [INT_SSINTR01] with mode [COMPLETE] on node [node01_ssintr01].DOM_10127 Request to disable service [INT_SSINTR01] completed.DOM_10126 Request to disable [SERVICE] [Repo_SSINTR01] in [ABORT] mode.DOM_10130 Stop service process for [SERVICE] [Repo_SSINTR01] on node [node01_ssintr01].LIC_10042 Repository instance [Repo_SSINTR01] is stopping on node [node01_ssintr01].SPC_10015 Request to stop process for service [Repo_SSINTR01] with mode [ABORT] on node [node01_ssintr01].DOM_10127 Request to disable service [Repo_SSINTR01] completed.DOM_10115 Request to enable [service] [Repo_SSINTR01].DOM_10117 Starting service process for service [Repo_SSINTR01] on node [node01_ssintr01].SPC_10014 Request to start process for service [Repo_SSINTR01] on node [node01_ssintr01].SPC_10018 Request to start process for service [Repo_SSINTR01] was successful.SPC_10051 Service [Repo_SSINTR01] started on port [6,019] successfully.DOM_10118 Service process started for service [Repo_SSINTR01] on node [node01_ssintr01].DOM_10121 Selecting a primary service process for service [Repo_SSINTR01].DOM_10120 Service process on node [node01_ssintr01] has been set as the primary node of service [Repo_SSINTR01].DOM_10122 Request to enable service [Repo_SSINTR01] completed.LIC_10041 Repository instance [Repo_SSINTR01] has started on node [node01_ssintr01].DOM_10115 Request to enable [service] [INT_SSINTR01].DOM_10117 Starting service process for service [INT_SSINTR01] on node [node01_ssintr01].SPC_10014 Request to start process for service [INT_SSINTR01] on node [node01_ssintr01].DOM_10055 Unable to start service process [INT_SSINTR01] on node [node01_ssintr01].DOM_10079 Unable to start service [INT_SSINTR01] on any node specified for the service.DOM_10126 Request to disable [SERVICE] [INT_SSINTR01] in [COMPLETE] mode.DOM_10130 Stop service process for [SERVICE] [INT_SSINTR01] on node [node01_ssintr01].LIC_10040 Service [INT_SSINTR01] is stopping on node [node01_ssintr01].SPC_10015 Request to stop process for service [INT_SSINTR01] with mode [COMPLETE] on node [node01_ssintr01].DOM_10127 Request to disable service [INT_SSINTR01] completed.DOM_10126 Request to disable [SERVICE] [Repo_SSINTR01] in [ABORT] mode.DOM_10130 Stop service process for [SERVICE] [Repo_SSINTR01] on node [node01_ssintr01].LIC_10042 Repository instance [Repo_SSINTR01] is stopping on node [node01_ssintr01].SPC_10015 Request to stop process for service [Repo_SSINTR01] with mode [ABORT] on node [node01_ssintr01].DOM_10127 Request to disable service [Repo_SSINTR01] completed.DOM_10115 Request to enable [service] [Repo_SSINTR01].DOM_10117 Starting service process for service [Repo_SSINTR01] on node [node01_ssintr01].SPC_10014 Request to start process for service [Repo_SSINTR01] on node [node01_ssintr01].SPC_10018 Request to start process for service [Repo_SSINTR01] was successful.SPC_10051 Service [Repo_SSINTR01] started on port [6,019] successfully.DOM_10118 Service process started for service [Repo_SSINTR01] on node [node01_ssintr01].DOM_10121 Selecting a primary service process for service [Repo_SSINTR01].DOM_10120 Service process on node [node01_ssintr01] has been set as the primary node of service [Repo_SSINTR01].DOM_10122 Request to enable service [Repo_SSINTR01] completed.LIC_10041 Repository instance [Repo_SSINTR01] has started on node [node01_ssintr01].DOM_10115 Request to enable [service] [INT_SSINTR01].DOM_10117 Starting service process for service [INT_SSINTR01] on node [node01_ssintr01].SPC_10014 Request to start process for service [INT_SSINTR01] on node [node01_ssintr01].DOM_10055 Unable to start service process [INT_SSINTR01] on node [node01_ssintr01].DOM_10079 Unable to start service [INT_SSINTR01] on any node specified for the service.Then I tried shutting down the domain and restarting the informatica service again. I got the following error when the Integration service was initializedDOM_10115 Request to enable [service] [INT_SSINTR01].DOM_10117 Starting service process for service [INT_SSINTR01] on node [node01_ssintr01].SPC_10014 Request to start process for service [INT_SSINTR01] on node [node01_ssintr01].SPC_10009 Service process [INT_SSINTR01] output [Informatica(r) Integration Service, version [9.0.1], build [184.0604], Windows 32-bit].SPC_10009 Service process [INT_SSINTR01] output [Service [INT_SSINTR01] on node [node01_ssintr01] starting up.].SPC_10009 Service process [INT_SSINTR01] output [Logging to the Windows Application Event Log with source as [PmServer].].SPC_10009 Service process [INT_SSINTR01] output [Please check the log to make sure the service initialized successfully.].SPC_10008 Service Process [INT_SSINTR01] output error [ERROR: Unexpected condition at file:[..\utils\pmmetrics.cpp] line:[2118]. Application terminating. Contact Informatica Technical Support for assistance.].SPC_10012 Process for service [INT_SSINTR01] terminated unexpectedly.DOM_10055 Unable to start service process [INT_SSINTR01] on node [node01_ssintr01].DOM_10079 Unable to start service [INT_SSINTR01] on any node specified for the service. I tried creating a new integration service and associating it with the same repository. Even then I got the same error. So I tried creating a new repository and a new integration service. Even then I got the same error. What might be the workaround to start the integration service?

Outbound delivery replication in target system

Hi,
I want to replicate an outbound delivery in the target system through IDOC.
but when i use standard IDOC Message type DESADV alongwith standard output type LALE, then it does'nt get replicated and an Inbound delivery gets created instead in the target system.
I also used another alternative of using BAPI with Business object 'LIKP' and BAPI BAPI_OUTB_DELIVERY_SAVEREPLICA
but its not getting triggered may be coz m using the application program and routine in the Nace as RSNASTED only.
Do i have to use any other program in NACE with Z O/P type for the same if i use BAPI. If so then what shud be the program name and Routine name for the same.
Please help me to meet the above requirement with the appropriate aaproach.
A quck reply is highly appreciable.
Regards,
Manoj

Hi Manoj,
Message type WHSORD is used transmit data to 3rd party whenever Outbound delivery is created in SAP i.e. as Outbound IDoc.
I am trying to understand the issue and slightly confused.
Is both sender & target systems are of SAP (SAP to WMS/EWM/SCM).
Message type SHP_OBDLV_SAVE_REPLICA which calls the BAPI you have already tried should work as I read from
below document.
[SAP document link|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/56a89d90-0201-0010-97a7-c5e8dbbb22e2?QuickLink=index&overridelayout=true]
Please check if it can be useful.
Regards,
SG.

Two Errors during Unicode import into Target System

I exported our non-unicode 64-bit test NW 7.0 BW database as unicode and now I have started the import into the new unicode database on the target system. I am using the Single Code Page System Conversion to Unicode NW 7.0 SP16 and higher documentation. We are at service pack 18 with NW 7. During the Import ABAP phase the sapinst stopped with an errors. I found the following the first error in the SAP000.log - O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20090326104509
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#18 $ SAP
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Nov 18 2008 23:19:12
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe -i SAP0000.cmd -dbcodepage 4103 -l SAP0000.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DDL) ERROR: no tablespace for TABART SLEXC
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DDL) ERROR: no tablespace for TABART SLEXC
(DB) INFO: disconnected from DB
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20090326104509
The second error appears in the SAPSLEXC.LOG - O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20090326104509
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#18 $ SAP
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Nov 18 2008 23:19:12
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSLEXC.cmd -dbcodepage 4103 -l SAPSLEXC.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname   = "BWP20090325020311                                                                                "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "STBWP64                                                         "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "STBWP64"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 2"
(GSI) INFO: machine = "4x AMD64 Level 15 (Mod 4 Step 8)"
(DDL) ERROR: no tablespace for TABART SLEXC
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DDL) ERROR: no tablespace for TABART SLEXC
(DB) INFO: disconnected from DB
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20090326104509
It looks like the same error but in two different logs. Has anyone seen this error before? Thanks.

I checked and the datafiles for all the tablespaces are set to autoextend up to 10gb and none have done this in the tablepaces that are close to being full. I did increase three tablespaces that were showing close to being full and that did not resolve the error. Would I need to restart the process from the beginning and adjust the dbsize.xml to make it work?

How to determine the target system during runtime of a Generic DS?

Hi Experts, good afternoon.
I am coding a Generic Extractor using Function Module. I have to select the field TIMESTAMP on table ROOSPRMSC. To do so, I need the value of RLOGSYS that is the BW system that is calling the Extractor.
Do anybody knows how to determine via ABAP the RLOGSYS (Remote Logical System) during the runtime of the Generic DataSource Function Module?
The table ROOSPRMSC keep the TIMESTAMPs values of the last delta upload for each DataSource and for each BW target system. As I have 2 BW's loading data from the same SAP ECC system, I need to know, during runtime of my Generic DataSource, the actual system that is requesting the delta. That's the reason why I need to know the BW's logical system name that is "runnig" the delta InfoPackage.
Plese, help!!!
Thanks in advance!
Leandro Vani

Leandro,
The calling program of your FM should have a local variable I_RLOGSYS which is populated with the BW server ID.
If you don't know how to access a variable in a program that is in call stack using field symbols, search SDN.
I haven't tested this, so you may have to explore a little.
Good luck.

FDM data target system load error

Hi,
I am trying to Load the data from FDM11.1.1.3 to Planning11.1.1.3
I am using Essbase Adapter ES11X-G4-E,I imported data from a csv file ,it is imported success,and Export file was also successfully created,
My question : after this I am getting the error message in another window Target system laod , Error:Invalid use of null
Can you please anybody tell me what is the reasons for getting this error ?
Regards,
SV

One of the values on the Hyperion Essbase Integration Setup tab of the adapter is currently empty. Perform the following
a) Right-Click on the Essbase adpater in the workbench and choose Configure
b) Click on the Hyperion Essbase Integration Setup tab
c)Click on the Load/Check button
d) Verifiy that the List1, List2, and List3 boxes are not empty. These must have values:
List1: 0 -Load
List2: opt1
List3: opt1

BPM sending messages to wrong inbound interfaces in PI and target system

Hi All,
i am doing File to proxy scenarion using bpm.i am receiving three files,two files splitting on based condition(location code) in receiver determination and sending to bpm(here one bpm receiving 3 files then it merges 3 files into one proact and some promo messages based promos in source file ,same in the second bpm with 2 files with different mapping,here target system is SAP APO SNC).i am doing testing now mapping and every thing is working fine.but first bpm sending messages(proact and promo messages) target sytem side (proact_in and promo_in)inbound inrefaces.if i am executing scenario both bpm sending (proact and promo) messaegs in target system its showing wrong bpm name.in target system also we can check messgaes sxmb_moni.
ex:if first bpm A sending 1 proact and 2 promos,and second bpm B sending 1 proact and 2 promos to target system,but in target syetm its showing sender component as 1st bpm A for 3 promo messages(here B bpm messages sending with A bpm viceversa i did the configuration correctly) and for 1 its showing second bpm. please give me suggetions how to resolve this issue.
Thanks,
seshagiri.

Is the connection to SNC via idocs or proxies. If it's via idocs can you check the control record and see if the issue is not there ?

Where shoould i specify about my target system in XI.

Hi all!
Xi sends XML file to my J2EE application.I am using HTTP adapter as receiver.
I have given the following info in outbound HTTP communication channel:what else to be specified in ID
Adapter type: HTTP
Message protocol: Xi payload in HTTP body
Transport protocol: HTTP 1.0
Adapter Engine: Integration Server
Addressing Type: URL
Service number:7001 (BEA Weblogic 9.0 application server)
Path: /InvokeJ2EE/SendName/
Target host:localhost(is where my J2EE appl reside)Authentication Type: Use Logon adat for SAP system
Username: xiappluser
password:xxxxx
Content Type: text/xml
XML code:UTF-8

Hi Datta,
Are you getting any error over here..?
Target host is the host name where application resides
Just go thru this link-
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/64dbb0af9f30b4e10000000a11466f/frameset.htm
Hope this helps,
Regards,
Moorthy

SOAP Receiver Adapter Target system down

Hi All,
My scenario is SOAP Receiver adapter --- > Portal system (Target system.).
Now team is taking restart of target system. It will take around 1 hr. So my question what will happen to the messages which is received by SOAP Receiver adapter in this time frame. ?

Hi Rajhans ,
All the messages during that period of time will fail with System Error ,We have to re-send these messages manually once the target system is up. In stead of selecting one by one you can set Multiple Selection On option to select the messages in RWB
.Please refer the weblog will give you some idea about the standard reports which can also be used to reprocess the messages.
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414700)ID1051765250DB10924207601714756238End?blog=/pub/wlg/2728
do you have synchronous soap receiver or async?
Regards,
Srinivas

Access current system or target system ID in message mapping

Hi.
I have a requirement to map three different constant values to Sales Org field, depending on whether the system is D, Q or Prod.
This needs to be done in the message mapping section of the Interface along with all the other mapping logic.
Is there any way how we can access the current system ID or the Target system ID (XI is communicating with target, in this case, ECC, using RFC receiver Communication channel)?
Please help.
Thanks.
Anuradha.

Hi,
The key element would be :-
System.getProperty("SAPSYSTEMNAME");
Use this in UDF to get System Name ... and then on basis of systemname do whatever you want to perform.
Regards
Prabhat Sharma

Using Informatica/ETL as target system

Similar Messages

Maybe you are looking for