Using linksys to get Xbox360 on line.

Hi folks, I own a Linksys: WRT300N wireless router. It operates at either 802.11-G or 802.11-N. My Xbox 360 is at the other corner of my home and out of range for the ...11-G operation. The genuine Microsoft wireless adapter is 802.11-G and is also a USB 2.0 divice. My question is this: Will the Linksys: WUSB300N, Usb wireless -N- adapter work on the Xbox-360? Console ports are USB 2.0, Console operating system is Vista. The WUSB300N box states that it is Vista compatible. So, will it work?

You can give it a try. But I've never encountered that device being used with a gaming console. If you do go for it, please let us know if it works of not.
Keep us posted! (",)
The box said windows xp or better... So I installed Linux!

Similar Messages

I use linksys to get internet access for laptop; can I easily hook up my linksys to a relative's computer so I can use my laptop at their house?

I was thinking I could use an ethernet cable and do the same sort of hookup on another person's PC as I have done on my own PC to allow me to use my laptop when I visit. Maybe I'd also have to bring my linksys disk and run that also. Do you know if this is possible and if there's an easier way to do this?
Thanks.

Is your work computer barred by your employer's policy from accessing the
Internet. If the answer is yes, you may get yourself in hot water or worse by
using your iPhone to give internet access to the employer's computer. You
may wish to check into your employer's policies and attendant punishments
for violation before proceeding too far. In many companies, making such
alterations to the way the employer owned computer operates is grounds for
immediate dismissal.

When I try to use spellcheck, I get the "Cannot find the User dictionary". It has always worked in the past and when I go to choose the main dictionary, it just goes back to the same line, cannot find user dictionary.

When I try to use spellcheck, I get the "Cannot find the User dictionary". It has always worked in the past and when I go to choose the main dictionary, it just goes back to the same line, cannot find user dictionary.

Have you ever created a user dictionary? You have to manually create one, AppleWorks won't do for you. The user dictionary & any other dictionaries belong in the AppleWorks Essentials folder which belongs in the AppleWorks 6 folder in Applications.
Deleting & reinstalling AppleWorks from the original disk will not delete your files unless you have saved them in the application folder. The Mac OS creates a separate Documents folder for your files & that is where the documents you created should be.
Unless all of your documents are AppleWorks 6 word processing documents, Pages alone is not sufficient. The iWork applications - Keynote, Pages & Numbers - can only open AppleWorks 6 presentation, word processing & spreadsheet documents, respectively. They will not open any other type of AppleWorks 6 files or any AppleWorks 5 or any version of ClarisWorks files.

Getting a dotted line around .swf files in my flash site now. this is new as of Firefox 3. Using 4 on a MacBookPro. tried "style outline none" fix. doesn't work. any help?

Question
getting a dotted line around .swf files in my flash site now. this is new as of Firefox 3. Using 4 on a MacBookPro. tried "style outline none" fix. doesn't work. any help?

/* stops annoying focus-selection boxes in FF3 */
*:active, object:focus, embed:focus
outline: none;
}

I seem to have lost carrier settings on my iPad1,I've tried a restore and update but get a message about the original sim card,which I still have but is inactive,really inconvenient as I can only use in wifi spots and off line mode,please help,sibear.

I seem to have lost carrier settings on my iPad1,I've tried a restore and update but get a message about the original sim card,which I still have but is inactive,really inconvenient as I can only use in wifi spots and off line mode,please help,sibear.

You might want to download something called an undelete utility. These can find files and recover them even after they appear to have been lost. There are some undelete utility programs that are free. Look at tucows.com
Also, it appears that you have POSSIBLY overwritten the actual files, which you moved manually, with I don't know what, which you moved in PSE's folder location view.
Next, in the future ... NEVER (that's: don't even think about it) move your photos in Windows. NEVER. NEVER. Not ever. Not once. This always (that's ALWAYS, as in 100% of the time) causes problems and usually makes things difficult to fix.
Lastly ... make regular backups! I must say this in the forums about seventy bazillion times a month. Make regular backups! Regular depends on how often you take photographs and edit them. Since my photographic activity usually happens on the weekends, I make backups every Sunday night. You may need a different schedule, depending on your activity level. MAKE REGULAR BACKUPS!

Get Withholding Tax Line Item Using FM

Hi all,
Is the any FM that allows me to get withholding tax line item (in table WITH_ITEM) based on the line item in BSEG? What I want from the result is that it will be able to tell me which line item in WITH_ITEM belongs to which line item in BSEG.
Thanks for helping out.
Regards,
Goh Tiam Tjai

Hello,
I've found a way to do it, and considering that I could not find the answer in SCN I'll post it.
I've created a report to show the calculated WHT which would be posted only at the payment moment. Also, in Brazil we work with extended WHT (and not the classic one).
You will need an ABAP.
Create a Z function module as copy of ZFI_WT_FB05_CALCULATE_WT.
This FM has only input parameters, therefore it does not provide you with the calculated WHT as an output (as standard). Knowing this, it is necessary to change it (the FM) by summing all T_WITH_ITEM-WT_QBSHH per accounting document (this table is present in the standard FM).
You need to provide the logic in order to obtain the parameters, The field which need to be filled are:
I_AKTYP              =             "H”
I_DYNCL              =             "Z”
Table I_POSTAB
Pick the data below from BKPF/BSEG of the accounting document which needs WHT to be calculated:
BELNR
BUKRS
GJAHR
BUZEI
WAERS
BUDAT
BLDAT
BSCHL
KOART
SHKZG
DMBTR
WRBTR
KONKO
XAKTP = "X"
XAKTS = "X"
Table I_BKPF
BUKRS
GJAHR     = year of the system date
BLART     = KZ
BLDAT     = system date
BUDAT     = system date
MONAT     = period of the system date
TCODE     = FBZ2
WAERS
Then after changing the FM to have T_WITH_ITEM-WT_QBSHH as output, simulate it by inserting the values of the accounting document which has WHT, and check the result, if it is the same as calculated by F-53 or F110.

How difficult can it be to get a phone line instal...

First of all, for a communications company, BT are shockingly bad at communicating with their customers!
We ordered a home move for our phone line and Infinity services back at the start of Dec, and had an activation date of 19th Dec. The engineer duly turned up on that date and set about the install. The single socket in our house was not where we wanted it (no power socket close by for the broadband router), but he would see about moving that and all was good so far.
However, the engineer was struggling to get a tone on the line and after much to-ing and fro-ing and calling another engineer who was nearby, decided that the actual wires to the house were damaged somewhere between 30m and 250m from the house and as he was not qualified to do any underground works, he was going to pass the job onto another engineer. The next engineer duly came next day (on a Saturday no less!) to get us up and running. No dice. The engineer could not find the break, and we would have to get a new cable put in.
Now, apparently when our house was built the telephone cable was not put in with any ducting and ended up being concreted into the wall! So we would have to get new ducting and the works installed. He then went to paint up the pavement where it needed to be dug up to put the ducting in etc. Except the pavement was covered in leaves, so he sprayed the leaves. Hey ho - I knew where he had painted and I would be able to direct the guys if necessary. As the was the Saturday before Xmas, he was doubtful if the contractors would be before the New Year. The engineer did however get the broadband connection available.
Roll on the New Year and it's a stoney silence from BT, until the morning of the 13th Jan, when a contractor appearred at the door to say he was here to put in the ducting. I pointed out where it was going and left them to it. I glanced out of the window after a while to see they had made a 2ft gap in the hedge at the wrong side of the garden! I also watch in disbelief as one of the guys loaded his wheel barrow with spoil and wheeled it into the woods across the road and dumped it. These guys were the "dig things up" gang, another team were the "filling in" team and they would be along shortly to fill in the hole and re-lay the tarmac on the pavement. However, we at least now have the ducting from the street the house with a rope in the duct to allow a cable to be pulled through. Progress of a fashion.
A few days later, the hole was filled in and the pavement tarred. It then took a full week before another engineer turned up to actually pull the wire through the ducting and connect us up. Except he couldn't because the rope was jammed. So he passed the job back to somebody else. Then 2 days later engineers 5 and 6 turned up with a rodding wire to free off the rope. They couldn't free it off. They did work out that the ducting was probably dislodged by the "filling in the hole" team, thus trapping the rope. This would need the pavement dug up again to reset the ducting. Oh joy.
So, imagine my surprise when another engineer turns up one morning to install our line to discover he couldn't pull the rope through, then another engineer turns up in the afternoon to do the same , followed by yet another engineer the next day!
Meantime, the only communication from BT on the whole matter is when we call them to be told it is all in hand and it will be completed "in 2 days time", or we receive a text message saying they tried to call (no missed calls), and would try to call again in 3 days, do not call them back.
So far in this saga we have had 13 people at the house, not getting us a phone line, in nearly 8 weeks and absolutely terrible communication from BT.
A call to BT at the end of last week resulted in a promise that we would be fully installed by yesterday at 8pm.
I called BT this morning to be told that the external works will be completed by this Friday and they would then call me back to arrange an appointment for the engineer to come and do the install next week!
The only saving grace is we do have an internet connection (pretty vital for me as I work from home!) although I do have an extension cable running across my hallway and we have not been getting charged for line rental for the past 2 months.
I was told today that we should be getting compensation, but to be honest I am not bothered about that - I JUST WANT A PHONE LINE INSTALLED!
Rant over (for now!)

Hi smert,
I am sorry about the delay in getting your phone line on. It definitely sounds like you have been going through the mill lately with all the work being done and still no phone line.
Please send me in your details using the "Contact The Mods" link found in my profile and we will take it from here.
Cheers,
OlgaC
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Screen fields not getting displayed after Line 16

Hi All,
There is a screen exit created in IW51, now the new requirment is to add 3 more fields. I added the fields below the exiting fields, in line number 15 , 16 &17. After executing the Tcode I could find that the field created in line 17 is not getting displayed in runtime. I have increased the screen length. The fields if moved to line numbers below 16 then they are getting displayed. Can anyone help me to find why it is not getting displayed after line 16.

Hi,
Can you give me the Enhancement name?
I searched for the exits using package , but i did not find any screen exists for that IW51 Tcode?

Default sales org on selection screen using set and get parameter!!

Hi,
I need to default value on selection screen using SET n GET parameter...logic to be used should be:
Sales Organisation:
This field should be filled by default using the user parameter id VKO. (using sentence GET PARAMETER and SET PARAMETER)...
Hope i need to write the code in initialisation and what shud b the content?
Regards
Gunjan

hi,
TABLES <table name>.
SET PARAMETER ID VKO FIELD <tablename-fieldname>.
call transaction 'zxx'.
try this sample program,
REPORT BOOKINGS NO STANDARD PAGE HEADING.
TABLES SBOOK.
START-OF-SELECTION.
WRITE: 'Select a booking',
SKIP.
GET SBOOK.
WRITE: SBOOK-CARRID, SBOOK-CONNID,
         SBOOK-FLDATE, SBOOK-BOOKID.
HIDE: SBOOK-CARRID, SBOOK-CONNID,
         SBOOK-FLDATE, SBOOK-BOOKID.
AT LINE-SELECTION.
SET PARAMETER ID: 'CAR' FIELD SBOOK-CARRID,
                    'CON' FIELD SBOOK-CONNID,
                    'DAY' FIELD SBOOK-FLDATE,
                    'BOK' FIELD SBOOK-BOOKID.
CALL TRANSACTION 'BOOK'.
regards,
siva
Message was edited by:
        Shan

How do I use daqmx to get encoder direction/count on E-series board?

Hardware:
PCI-6014
Labview 7.1
I have a linear actuator and wish to get distance/direction. The
motor has a quad encoder with phase A and B only. I connected the
lines according the the E-series, PFI-8 and PFI-6, and ground to
digital ground. I then attempted to design a control with daqmx but
failed. I have tried the daqmx examples but none were attempting
a reverse in direction. Most examples given for direction change
are for traditional daq control; i cant make a correlation on what to
use to substite traditional daq with daqmx vi's.
2 questions:
How do I use daqmx to get encoder direction/count on E-series board?
Are there low pass filter vi's recommended for each phase connection to stabilize data?
Thanks,
Wayne Hilburn

Hello Wayne,
Take a look at the Count Digital Events.vi shipping example. You can find this in LabVIEW by selecting Help >> Find Examples... then browsing to Hardware Input and Output >> DAQmx >> Counter Measurements >> Count Digital Events.
If you set the "Count Direction" control to "Externally Controlled", you will be able to count up and down depending on which direction you rotate your encoder. Make sure you wire Phase A to Ctr0 Source and Phase B to P0.6. P0.6 is the up/down line for counter 0.
I hope this helps. Please let me know if you have any further questions.
Regards,
Sean C.

How can i use in the same time input line and mic to recorder in several track whit SONAR

I have beem recording only input line because SONAR 4 not recognized the mic in, Help me!!!.
Thank you. Sorry for my english

LIMACAR wrote:
How can i use in the same time input line and mic to recorder in several track whit SONAR 4. I have beem recording only input line because SONAR 4 not recognized the mic in, Help me!!!.
Thank you. Sorry for my english
Depending on which soundcard you have there, but if your card is capable for
ASIO -> activate I/O drivers on Sonar/Options/Audio/Drivers -tab (mic/line sources should be listed there --> activate) and select the mic or/and Line sources on tracks "I" - dialog
WDM/KS -> use the Surround Mixer or windows recording controls for recording source selection (mic should be listed there)
MME32 - > same w/ WDM/KS
If you use Asio4All --> same w/ WDM/KS & MME32
No mic and line source simultaenously w/ WDM/KS and MME32.
You perhaps be able to do this w/ kX drivers.
jutapa
ADDED:
You can also install modded version of Audigy 2 drivers/software but I have never done this w/ Li've! 5. so I can't be sure if you get ASIO support for your card.
Here are the instruction --> http://www.tech-pc.co.uk/audigy-2.php
jutapaMessage Edited by jutapa on 05-25-2006 02:48 PM

How do you get a new line in a description of an iCal event?

I need to be able to create multiple lines in a description of an iCal event. In the past, I used control return to get a new line. In Mountain Lion, this does not show up as a new line, once the event has been saved. It merges all of the text onto one line and creates new lines as the space dictates. How can I force new lines in the event description between the words that I have chosen?

I'm interested too.
Please help, I had own method to management iCal's event – new line, of 10.7 worked great – now is a little terrible for me :/

14 weeks to get a phone line installed - £10 compe...

I moved house on 28/07 and after a huge amount of problems with Orange and after managing to cancel my account with them I ordered BT Broadband and Evening & Weekend Calls on 07/08/12.
I get 3 emails confirming my order, thanking me for choosing paperless billing etc.
My initial engineer appointment was on 14/09/12 which is 5 weeks and a long time. To quote BT: “It usually takes 15 working days from when you order. It can take longer but this is very rare.” (http://bt.custhelp.com/app/answers/detail/a_id/8317/~/how-long-will-it-take-to-install-a-new-line%3F)
I get a text and an email on 12/07 to remind me of my appointment between 1pm and 6pm. So far so good.
The router gets delivered at 12.30am. This is promising.
The engineer comes at 13.30pm, installs the BT Open Reach box in my flat and then asks me if I can open the electronic gate next door as he needs access to my neighbour’s pathway to activate the distribution point. I tell him I cannot as it’s not my building. We try the trades button on the door system. It doesn’t work. We try pressing random house numbers on the door system (there’s no flat numbers on the building) to see if someone’s home. Nothing works. I phone my landlord who tells me this is a council building. No one is coming in and out of the building/gate. After about 30 minutes of trying and waiting I tell him just to use his ladder and climb over the gate (it’s about 6 foot) and activate the distribution point. I’ll take the blame if someone complains. It shouldn’t be a problem as I live next door, I’ve got a BT Open Reach engineer with me and we have a perfectly valid reason to do it. He tells me he can’t do that because of health and safety riles and trespassing laws. Fair enough.
The engineer leaves but before he does he tells me that when I’ve got access to the pathway BT would be able to send an engineer within 24 hours to activate the distribution point. He also tells me there is no need for me to be there the next time as all the work inside is completed and the only thing that needs to happen is for someone to activate the distribution point which is located on a wall on my neighbours building accessible from the pathway. He points it out to me and there is indeed a black box on the wall which can be reached using a ladder in the pathway.
I phone BT to see if anyone can find out how to get access to the pathway as I assume that if BT has installed a distribution point there they must have a way for them to get access to it. Especially as the engineer told me there are 3 lines in my building so this must have happened before. I was wrong. I have to argue with the customer service person with a very poor command of the English language for 30 minutes. He doesn’t know what “the council” is and doesn’t understand whatsoever why I –and I quote- “Can’t just ask the neighbour to let the engineer in when the next appointment has been made”. I try to explain to him there is an electronic metal gate with a call system and I am unable to call anyone as there are no flat numbers on the outside of the building and asked if he was suggesting that I wait all evening after work until someone comes out and that even then, surely I can’t ask my neighbour to stay home to let a BT engineer onto his pathway because I am trying to get a phone line installed. He then presented me with another option: “We can install a new line from the road but this is chargeable by £350”. After 30 minutes of this and asking to speak to a manager several times –which was refused- I had enough and hung up.
Determined to get the problem resolved I rang again and got someone else on the phone. She was quite sympathetic and advised me to phone the council and see if they can help. She confirmed that I didn’t need to be there for the next appointment if someone could give the engineer access to the distribution point as all the work apart from the distribution point activation was complete. By this time it was 4pm on a Friday and she promised to call back at 4pm on Monday.
I called the council right away but they said the caretakers had gone home as it was late on a Friday and advised me to ring back on Monday.
I get a text from BT: sorry we missed you appointment etc.
BT calls me on Monday morning 10.30am asking if I’ve sorted it. I tell the person I was expecting a call from them at 4pm and therefore I hadn’t rang the council yet. He promises to ring me back on Wednesday at 10.30am.
I call the council later that day; they’re not very helpful and advise me to call them again on Tuesday.
On Tuesday they log the call and lo and behold. Wednesday at 8.30am, the caretaker calls me, gives me his mobile number, tells me the trades button on the call system will work before 9.30am and they can give them access remotely. If they’re coming after 9.30am, the engineer needs to ring him an hour in advance and he’ll come to open the gate. We’re getting somewhere.
I don’t get a call on Wednesday 10.30am.
I call them myself that afternoon and explain the above. The guy says he’s written it all down, everything will get sorted and I’ll get a text with the new time and date.
Someone with a very poor command of the English language phones me on Thursday. I asked why she is ringing me. She says it’s to makes an engineer appointment. I tell her she doesn’t need to ring me as I don’t need to be in the property and they should all the information needed as I called them the day before. She doesn’t have a clue what I’m on about. I tell her to read out what she has on her screen under the notes as I now don’t trust that the person the day before has written it down properly. She once again doesn’t have a clue what I’m on about. I ask to speak to her manager. She says he’ll call me back. 5 minutes later he does. His English is excellent and he seems to have found the notes and knows exactly what’s going on. This is encouraging. He says the first appointment they have is 03/10 (it is now 20/09) but he’ll make sure they get it earlier and he’ll ring me back. The first person that hardly speaks English calls back. She says the appointment will be on 03/10 between 8am and 1pm. I tell her that her manager told me he was going to make sure it was going to be earlier and ask her why he lied to me. She doesn’t understand what I’m saying. I try to explain to her that trades button on the call system will work before 9.30am and they can give them access remotely but if they’re coming after 9.30am, the engineer needs to ring him an hour in advance and he’ll come to open the gate. She doesn’t understand what I’m saying. I ask her to get her manager to ring me back as he speaks English. She says he’ll call within 15 minutes. I get a text 5 minutes later confirming my appointment for 03/10 between 8am and 1pm.
On 02/10 I phone the caretaker in the morning to let him know they’re coming on 03/10 between 8am and 1pm. I also called BT once again to check everything was clear, confirming they have the correct mobile number of the caretaker etc. They say they have all the information needed and promise that the work will be done.
I phone on the afternoon of the 3rd to check the work had been done and I am told that it hasn’t as the engineer needs access to a flat roof and the caretaker can’t provide him with that. I explain that the original engineer had been on the flat roof already and told me they only needed to get through the gate to activate the distribution point so I don’t understand why they now need to get back on the roof. The roof can be accessed with a ladder (which they all standard have with them) from the pavement anyway so why do I need to be there? They tell me that the engineer has tried to call me but my phone was switched off. I am 100% sure that my phone has been on all day and I haven’t received any missed calls. Also, after all of the above, I wouldn’t switch my phone off on the crucial day. The engineer is lying. After being on the line for 15 minutes (as it takes at least 5 minutes to go through the automated menu every single time you call them and it literally takes a minute for the information to come up on their screen every time they need to access a file) that I don’t have time to discuss this right now as I have an important teleconference with an overseas client and ask for someone to call me back that evening to discuss this as I am busy at work all day.
I receive a text 10 minutes later saying the next engineer appointment is 12/11 between 1pm and 6pm.
This is 14 (!!!) weeks after ordering the service. I phone back when I have a short break at work to discuss this and request a call back. Someone calls me back 5 minutes later and asked for my account information which I don’t have handy so I ask to hold on while I’m looking it up. She hangs up on me.
I stay late at work to write an email on the email form on the website with a watered down version of all of the above and I get a confirmation email that it’s arrived.
I get another text that evening at 8.40pm as well as an email saying -once again- that the next engineer appointment is 12/11 between 1pm and 6pm.
Someone calls me at 8.50pm saying that the next engineer appointment is 12/11. I tell him I know this as they’ve sent me 2 texts and an email already and that this date is unacceptable and ask to speak to his manager. He tells me I need to call the Order Management Department. I ask him what the number is. You’ve guessed it: 0800 0800 150.
Someone called Chris XXXXX calls me the morning after to discuss the email I’ve written the day before. He gives me the usual “Open Reach controls the engineers” story and tells me the appointment will not be earlier than 12/11. I tell him this is unacceptable and if the appointment can’t be moved forward I want some compensation for all the expense and inconvenience caused. He tells me that since I haven’t been billed yet I’m not eligible for any compensation but as a gesture of good will he will give me £10 which I’m normally not eligible for as this is only given to people whose engineer didn’t come on time. I try to explain that if the engineer would have called me as he said he’s done (and not lied like he’s done) I could have explained where the distribution point was and I probably even would have rushed home from work to finally get it sorted. We argue a bit about compensation in which he tells me he’s already doing me a favour by giving me £10. I stop the argument to discuss more practical issues and ask him if I now need to be home on 12/11. He says I do. I now need to take another day off work it seems. I ask him if the caretaker needs to be there as well. He says he does. I ask him if I should invite anyone else and provide tea and biscuits for everyone. I don’t think he gets the joke. We argue a bit more about compensation, we get nowhere. I’m now getting upset. He says he’ll call me back at 1.30pm.
He does and immediately I ask him for his direct phone number. He says he doesn’t have one. I ask him for his email address. He says he doesn’t have one. I ask how to get in touch with him. He says through the 0800 call centre or the form on the website. Now the line gets really bad and gets disconnected. There is nothing wrong with my mobile or signal, I have 5 bars and 3G showing but I can’t hear him and the line gets disconnected. This happens 2 more times. I get him back on the phone and I ask him to call me back on my work landline. He does and a number shows up on the phone (not the 0800 one that showed up when he called my mobile). I immediately write it down and tell him he just lied to me about not having a direct line. He says it’s a desk used by many people. I tell him that if I ring that number and he’s around there’s chance I could get to speak to him surely. He says it’s only used for outgoing calls. I haven’t tried to ring it and can’t be bothered to be honest. I stop this argument and bring the conversation back to compensation. I ask if he can at least give me a few extra months free or upgrade my account for free for a few months maybe by throwing in some telly or something. He says he can’t do that and they can review compensation once the line has been installed. I tell him that’s not good enough and that this whole story is going online and hang up.
Worst customer service I’ve ever experienced and it seems that I’m stuck with it because I’ve already got an appointment and cancelling and going with another provider will result in an even longer wait.
I’ve been offered £10 compensation for taking 2 days of work, hours on the phone, massive mobile phone bills, a lot of stress and 14 weeks without a landline or internet. Truly unbelievable.

Hi
I am sorry to see you are having problems with your BT Service
I suggest you contact the forum mods they should be able to get this problem sorted for you this is a link to them http://bt.custhelp.com/app/contact_email/c/4951
They normally reply by email or phone directly to you within 3 working days they will take personal ownership of your problem until resolved and will keep you informed of progress
They are a UK based BT specialist team who have a good record at getting problems solved
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Trying to use FTP to get data from a different server

Hi Friends,
    I have to use FTP to get data from a different server and upload it on SAP server. Now my problem is when I m trying to do ftp through command line it brings the file but with no data.
   Through ABAP program nothing is happening.
Here's my code--
V_PASSWORD = 'test@123'.
V_PWD_LEN = STRLEN( V_PASSWORD ).
CALL FUNCTION 'HTTP_SCRAMBLE'
    EXPORTING
      SOURCE      = V_PASSWORD
      SOURCELEN   = V_PWD_LEN
      KEY         = CS_KEY_500098
    IMPORTING
      DESTINATION = V_PASSWORD.
CALL FUNCTION 'FTP_CONNECT'
    EXPORTING
      USER            = 'test'
      PASSWORD        = V_PASSWORD
      HOST            = '176.0.1.6'
      RFC_DESTINATION = 'SAPFTPA'
    IMPORTING
      HANDLE          = MI_HANDLE
    EXCEPTIONS
      NOT_CONNECTED   = 1
      OTHERS          = 2.
CHECK SY-SUBRC = 0.
cmd = 'lcd d:\ftp'. .
PERFORM FTP_COMMAND USING CMD.
CMD = 'asc'.
PERFORM FTP_COMMAND USING CMD.
CONCATENATE 'dir' 'ftpt*' INTO CMD SEPARATED BY SPACE.
PERFORM FTP_COMMAND USING CMD.
cmd = 'ls'.
concatenate 'ls' INTO CMD SEPARATED BY SPACE.
PERFORM FTP_COMMAND USING CMD.
cmd = 'mget trial.txt'.
CONCATENATE 'mget' 'trial.txt' INTO CMD SEPARATED BY SPACE.
CALL FUNCTION 'FTP_COMMAND'
    EXPORTING
      HANDLE        = MI_HANDLE
      COMMAND       = CMD
    TABLES
      DATA          = MTAB_DATA1
    EXCEPTIONS
      TCPIP_ERROR   = 1
      COMMAND_ERROR = 2
      DATA_ERROR    = 3
      OTHERS        = 4.
IF SY-SUBRC = 0.
    LOOP AT MTAB_DATA1.
      WRITE: / MTAB_DATA1.
    ENDLOOP.
ELSE.
    CONCATENATE 'Error in FTP Command while executing' CMD INTO ERROR SEPARATED BY SPACE.
    WRITE: / ERROR.
ENDIF.

Hi
try this.....in one of my reqt, i done this successfully....
FORM FTPCON.
FTP-------------------------------------------------------*
CLEAR DSTLEN.
SET EXTENDED CHECK OFF.
DSTLEN = STRLEN( S_PWD ).     -
> (S_PWD (password) is a selection screen field )
CALL FUNCTION 'HTTP_SCRAMBLE'
    EXPORTING
      SOURCE      = S_PWD
      SOURCELEN   = DSTLEN
      KEY         = KEY
    IMPORTING
      DESTINATION = S_PWD.
CALL FUNCTION 'FTP_CONNECT'
    EXPORTING
      USER            = P_USER                   -
> Username
      PASSWORD        = S_PWD             -
> password
      HOST            = P_HOST                  -
> Host
      RFC_DESTINATION = P_DEST         -
> Destination
    IMPORTING
      HANDLE          = HDL
    EXCEPTIONS
      NOT_CONNECTED   = 1
      OTHERS          = 2.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'FTP_COMMAND'
    EXPORTING
      HANDLE        = HDL
      COMMAND       = 'set passive on'
    TABLES
      DATA          = RESULT
    EXCEPTIONS
      TCPIP_ERROR   = 1
      COMMAND_ERROR = 2
      DATA_ERROR    = 3.
CALL FUNCTION 'FTP_R3_TO_SERVER'
    EXPORTING
      HANDLE         = HDL
      FNAME          = G_FCNAME
      CHARACTER_MODE = 'X'
    TABLES
      TEXT           = T_FILE1
    EXCEPTIONS
      TCPIP_ERROR    = 1
      COMMAND_ERROR = 2
      DATA_ERROR     = 3
      OTHERS         = 4.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'FTP_R3_TO_SERVER'
    EXPORTING
      HANDLE         = HDL
      FNAME          = G_FCNAME1
      CHARACTER_MODE = 'X'
    TABLES
      TEXT           = T_FILE2
    EXCEPTIONS
      TCPIP_ERROR    = 1
      COMMAND_ERROR = 2
      DATA_ERROR     = 3
      OTHERS         = 4.
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'FTP_DISCONNECT'
    EXPORTING
      HANDLE = HDL.
CALL FUNCTION 'RFC_CONNECTION_CLOSE'
      EXPORTING
        DESTINATION          = P_DEST
      EXCEPTIONS
        DESTINATION_NOT_OPEN = 1
        OTHERS               = 2.
    IF SY-SUBRC <> 0.
      MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDFORM.                    " FTPCON
Hope it helps.....

Get the current line no.(similar to sy-linno in report) in Sapscript form

Hi everyone,
In ABAP reporting, you can use sy-linno to determine the current line no.
But if in sapscript form,
does any system field to get the currect line no. or y-origin. ?
Just say the program is now runing and have written several lines in a window of the form.
AS         This is the first line
AS         This is the second line
AS         This is the third line
how to get the current line = 3 or yorigin '+3' LN?
Thanks for reply in advance.

Hi,
you can also chk the sy-linno directly in your script.
Regards
Subramanian

Using linksys to get Xbox360 on line.

Similar Messages

Maybe you are looking for