Using Math.floor

When I use Math.floor I get an integer part of a double rigth?
For exemple >> If I have
double num = 34.54
Math.floor(num) will return 34 rigth?
But this 34 is a double 34.0 or is an integer 34?
If not an integer, how can I do to get the integer part "34" like a integer number 34 and not like a double 34.0?

Yes I already did it but it is not working
Here is the code
private void confirm(Double list[]){
int nParcelas = (int)(list[2]);.....
I call the function confirm from another class, and I pass a list like parameter.
I have the same fuction but is a list of String and work ok. I get the numbers of this list and make some operations and averything works find...
But I want to get an item of this list and get its integer part, and it it's not working....

Similar Messages

How to get input and output using math interface toolkit

Hi,
I am fairly new to labview and i am trying to convert my labview code
into matlab mex files using math interface toolkit. I cant see any
input or output terminals when i try to convert the code to mex files
even though my vi has plenty of inputs and outputs that should be
available during conversion.
just to cross check i made another vi in which i inputted an
array of data to an fft and outputted it to an array again. i tried to
convert this code to mex files but was still not able to see any input
or output terminals, which makes me believe that i must be doing
something wrong at the very basic level and inspite of trying really
hard for some days now i have not been able to figure out that might be.
So please help.
I am attaching the basic vi that i created along with the link that i followed for converting labview code to mex files.
http://zone.ni.com/devzone/conceptd.nsf/webmain/EEFA8F98491D04C586256E490002F100
I am using labview 7.1
Thanks
Attachments:
test.vi ‏17 KB

Yes, you've made a very basic mistake. You have front panel controls and indicators but none of them are connected to the VI's connector pane. right click on the VI's icon and select "Show Connector". You use the wiring tool to select a connection there and then select a control or indicator. Use the on-line help and look up the topic "connector panes". There are some sub-topics on how to assign, confirm, delete, etc.

Is using Math.pow faster than multiplying myself?

Hi all,
Is it faster to use Math.pow to calculate a power than to, say, multiply it myself in a loop? How about if I'm just doing a square -- is it faster to use Math.pow(x,2) than x * x?
I noticed that the pow method in StrictMath has the keyword "native." Does this mean it's being done by the operating system? Does it mean it's being done directly in the hardware?
Thanks!
Tim

TimQuinn wrote:
This is in an inner-loop deep in a simulation, so I'd like it to be as fast as possible. From the above, I'm gathering that I should keep using pow for my ^8 calculation, but substitute a simple multiplication for my ^2 calculation.Not necessarily. Remember that N^8 = ((N^2)^2)^2. The Math.pow algorithm will very likely use this optimization, but you can too.
Related question: does it make any difference at all in these kinds of operations if I use floats or doubles? In terms of speed, I mean, not precision.Actual answer to all of your questions: try all of the possibilities in your simulation and see what actually happens.

How to use math formula on waveforms

Hi all,
I'm trying to create a program that can use math scipts, formulas etc on waveforms. I've done it for one signal, but I don't know how to change work on 2 or more signals;/ Let's see exampe: one channel is voltage, the second is current and I want to see both of them and as a third signal power so I'm writting formula ch3=ch1*ch2. Another example: I've signal which represents speed of starting motor (500 points) but I need only few points so the formula will be: ch1(20:120) and I have points from 20 to 120. Is it possible to do it? I can't do it using blocks cause I don't know which signal means what... so ch1 can be voltage, ch2 speed, ch3 current ch4-torqu etc. I know that I can cut a part of signal by subarray or subwaveform but it must be done by formula to use (for example) something like that:
ch1(1:20)=0 <- replace all point from 1 to 20 of ch1 by 0
ch2(50)=40 <-replace point 50 of ch2 by 40
ch3=ch1*2 + ch2 <- do this operation but first do both above this one.
Is it possible? or it's to complicated?
I attached my vi which is working for one selected signal (I don't want to select it... but I don't know how to do it;/) and signal that I'm using to check how it's work
Thanks
Mike
Attachments:
Archive.zip ‏134 KB
math formula.vi ‏152 KB

I've upgraded it a little and it works with 2 signals but very sensible;/ formula must have this construction: c3= ... , both of signals must be switched on, there's no way to use part of signal (e.g.c1(21:54) ) and I can't use 2 rows (something like this: c3=c1*c2; c3=c1 doesn't work);/ additionally I wanted to have possibility to use all of signals as input and all of them as output
Attachments:
math formula.vi ‏183 KB

Rounding down using the floor function

I need some help rounding down to the nearest 5 using the floor function.
My code appears to be correct but I'm not getting the wrong result.
create or replace
TRIGGER "SALE_CALC" BEFORE
INSERT OR
UPDATE ON Prs FOR EACH Row
BEGIN
:New.Prsvf9c := (floor((:New.Prsprsc - :new.prsvf1c)/5)*5);
END;
*:New.Prsprsc = 100.00 and :new.prsvf1c = 46.00*
After the trigger executes I get a result of *54.00*, which is the result before the rounding should take place. The result should be *50.00!*
What am I doing wrong?

The code you posted appears to produce the results you expect if the data is what you say it is
SQL> create table prs(
2    Prsvf9c number,
3    Prsprsc number,
4    prsvf1c number
5 );
Table created.
SQL> create or replace
2 TRIGGER "SALE_CALC" BEFORE
3 INSERT OR
4 UPDATE ON Prs FOR EACH Row
5 BEGIN
6
7 :New.Prsvf9c := (floor((:New.Prsprsc - :new.prsvf1c)/5)*5);
8
9 END;
10 /
Trigger created.
SQL> insert into prs( Prsprsc , prsvf1c )
2    values( 100, 46 );
1 row created.
SQL> select * from prs;
   PRSVF9C    PRSPRSC    PRSVF1C
        50        100         46If you're seeing something different, it would be very helpful if you did something like I did here and post a reproducible test case.
Incidentally, I'm not sure why you would have columns named prsvf1c and Prsvf9c but if that implies that you've denormalized your table to store 9 values rather than creating a child table with up to 9 rows, that's unlikely to be a reasonable solution.
Justin

Can work center formula use function floor()?

I create a formula in a work center.
I must use function floor() in formula.
But it appear error.
Can it use in formula?

Hi Philip,
We cannot use Mathematical Functions in formulas.
Check url
http://help.sap.com/saphelp_47x200/helpdata/en/b1/c0392e439a11d189410000e829fbbd/frameset.htm
Check for Formuls->Rules for Maintaining Formulas
Hope this helps.
Thanks
Lakshman

Random in AS3...when is Math.floor necessary?

Hi, I'm trying to convert:
_root.character_splash_mc.loadMovie("swfs/splashes/character_splash_" + random(3) + ".swf");
To the following AS3 code:
var character_splash_loader:Loader = new Loader ();
character_splash_loader.load(new URLRequest("swfs/splashes/character_splash_" + Math.floor(Math.random()*3) + ".swf"));
MovieClip(root).character_splash_mc.addChild(character_splash_loader);
Will "Math.floor(Math.random()*3)" return the same random type of number as "random(3)"??
Thank you
(very sorry about this being so basic...trying to learn AS3 ASAP...very grateful)

Math.floor(Math.random()*3) will produce 0,1,2 as outputs, which I believe is what random(3) would do.

I can't use Math.class

I can't use Math.class although I import java.lang.*.
plz help me.

and tell us what you mean by "can't use"My father began to work a PC as he was already
retired. He has been fighting with it ever since.
Sometimes he calls me for help crying "everthying has
disappeared!"
I ask him: "What is 'everything' and what does it
mean 'disappeared'?"you could then go on to throw a further spanner in the works by asking what "has" means :)

[svn:osmf:] 14428: DVR, CR feedback: adding comments, and using Math.min/ max.

Revision: 14428
Revision: 14428
Author:   [email protected]
Date:     2010-02-25 12:46:16 -0800 (Thu, 25 Feb 2010)
Log Message:
DVR, CR feedback: adding comments, and using Math.min/max.
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/net/dvr/DVRCastNetConnectionFactory.as

Decimal power without using Math.pow()

how do you raise a decimal number (3.543) to a decimal power (4.235) without using Math.pow()?

Use Math.log() and Math..exp().
Math.exp(4.235*Math.log(3.543))

How do i use math type equations in pages?

I can't get my math equations to work when im in pages

That's not correct -- Pages 5.0 does work with MathType 6.7e. (You didn't say what version you're using, but I'll assume Pages 5.0.) With MathType installed, there should be an Insert MathType Equation command in the Edit menu of Pages.
However...
That's not to say the marriage of Pages and MathType is perfect. We're hearing reports that some people are having no trouble at all, and some people aren't able to edit old equations, while some people can edit old equations but can't insert new ones. Some customers have reported that if they open Pages first, then MathType, it doesn't work, but if they open MathType before Pages, it works.
We don't have any explanation for all of this. Many times it's due to the computer's software configuration, but since Pages 5.0 requires a fairly new Mac running OS X 10.9 Mavericks, there's not much that can go wrong with the configuration. We're investigating it, but you should also let Apple know if you're having problems. You can do this very easily with their Pages feedback form: http://www.apple.com/feedback/pages.html

How to use math symbols in a right to left text properly?

Hey there
When I write a simple mathematical equation or a number(which has sign) in the middle of a right to left text in a text box(I simply set keyboard language to EN for typing expressions & numbers) it's like mathematical symbols are somehow not considered math symbols and that's weird since in word it's not that way, take the following sentence for example that means result of the 0-127 expression is -127:
حاصل عبارت 127-0 برابر 127- است.
In word I can type it just fine(for typing expressions and numbers I set keyboard language to EN) but when I type it the same way in adobe acrobat I get this:
حاصل عبارت 0-127 برابر -127 است.
copy & paste from word also doesn't do any help, so If I want to get it right I should type math expressions from right to left meaning as instance to type 0-127 I should first type 127 then - and finally 0 also should type digits of a number before typing its sign as example for typing -127 I should first type 127 then - ,now I wonder is it the way acrobat works or I'm doing something wrong.
By the way OMG o_O even when I did copy & paste my messasge from word to the text box of forum for posting, it ended up treating math parts in upper right to left paragraph the same way as acrobat I just had to write them from right to left!
Anyone has any idea?
Message was edited by: Pooria

In a word document I wrote:
حاصل عبارت 127-0 برابر 127- اسـت
Then tried printing it using "Adobe PDF" printer, in output pdf that sentence was written in right order and interestingly it was broken into three text boxes thanks for reply.

How to use math symbols in Pages

How can I find math symbols in Pages?
Do I need additional Software or is there a possibility as in Microsoft Word?

You can find some math symbols in Pages if you go to Special Characters. Open Pages, go to Edit menu (on the menu bar) > Special Characters, and choose math symbols in the sidebar, so you will be able to add a symbol double-clicking the symbol.
However, it may not include all symbols. In this case, you will have to use other third-party applications

How to use Math.random() to generate an integer within a range

How can I generate a random integer from 1 to 10 using the Math.random() method?
Thanks.

Then why do i get this compile-time error?
found   : double
required: int
                    matrix[i][j] = (int) 11 * Math.random();
matrix is an array of integers:
String colNumStr = JOptionPane.showInputDialog("Please specify the number of rows");
    String rowNumStr = JOptionPane.showInputDialog("Please specify the number of columns");
    int rowNumInt = Integer.parseInt(rowNumStr);
    int colNumInt = Integer.parseInt(colNumStr);
    int [][] matrix = new int [rowNumInt][colNumInt];

Configure ag6000 Scope IVI driver to use math channels

Hi all,
just before capitulating using the generic Teststand-IVI Scope driver capabilities, one try get help here:
We want to use a ag6000 compatible scope with teststand. The first guess is to use the ag6000 IVI compatible driver, and directly use IVI-scope steps within teststand.
Connection and step usage works so far, but:
1. How do I configure the math channel to be used from within teststand? The ag6000 driver itself provides the necc. functions when used with CVI, but the generic Teststand IVI Steps don't have this functionality (or I'm to blind to find it?)
The alternative approach I'll start, is to encapsulate the ag6000 driver in a cvi DLL and use this within teststand.
2. Unsupported feature seems to be having an AUTO trigger or something like a continous measurement. (We also need to measure DC without crossing any trigger level)
Any Ideas?
David

All of the functions in the IVI are defined by the IVI Foundation - not NI or TestStand. They pick the functions that are most common to all scopes. If there is a specific instrumention function that you need to use, you have to use the specific driver for the scope. Doing that, of course, removes a lot of the reasons for using IVI in the first place.

Using Math.floor

Similar Messages

Maybe you are looking for