Using more than one USB Port at a time?

So, I'm trying to record something in a project using my Rocksmith USB to 1/4 inch cable, but I also need to make a screen recording of me doing that for a school project using my RockBand USB mic. The problem for me is that only one USB Port recognizes these two, and the three that don't aren't dead, as they work with everything else I have. How do I set it so that more than one USB port can recognize these devices? I don't want to have to keep switching every time.

Thanks mhartnett.
I have looked at the example on the link you gave. According
to the example for the FileReferenceList in the documentation, it
seems to make multiple or rather separated requests to the
server-side upload script.
So for example if I have 3 files to upload, the script will
call the the upload() function of the FileReference class thrice
with the URLRequest(which is the server-side upload script). So in
this case, my server-side script that is handling the upload will
only upload one file at one time.
Is there a way where I can have say all the 3 files sent
together to the server-side script, and then have them uploaded all
at once within the server-side script itself?
So say my PHP file, I could have access to like
$_FILES['Filedata1'], $_FILES['Filedata2'] and $_FILES['Filedata3']
together at one request.

Similar Messages

  • Can I use more than one bluetooth device at a time with my iphone4

    Can I use more than one bluetooth device at a time with my iphone4

    Anthony
    I have a Plantronics 975 earpiece that works very well with my Razr.  I
    just got a Panasonic KX-TG7873S phone system for my home, it has a
    "Link-to-Cell" cellular convergence solution, from what I understand it is
    just Bluetooth enabled.  I have paired both device with my Razr.  In
    settings, Bluetooth setting, both device show.  But only one device can
    connect at a time.  If my Plantronics is connected and I choose the
    Panasonic device, the Plantronics device disconnects and the Panasonic
    device then says it is connected.  Both devices work when they
    are connected.  Is it because they are both "headsets"?
    So, to have to remember to connect to one or the other device, depending on
    weather I am coming or going is not practical.
    On Sat, Sep 14, 2013 at 1:14 PM, Verizon Wireless Customer Support <

  • Use more than one transition in the same time between two video clips?

    Dear Premiere Pro programmers,
    Could you please create a way to use more than one transition in the same time between two video clips without exporting to media, or creating new sequence, or using another layer (adjustment or transparent)?
    Message was edited by: Kevin Monahan
    Reason: Next time, create a more descriptive title.

    Hi Aqsa Nori,
    I'm not sure what you are imagining, but it might be possible to achieve by key framing effects. Can you tell us what you want to do? Also, please feel free to file a feature request: http://adobe.ly/feature_request
    Thanks,
    Kevin

  • Using more than one Ethernet port

    So I just brought myself another pair of TP link wifi adapters as I already had some, but the ones I had only had 1 port and these have 3. So I set it all up and try to use 2 ethernet ports as I want to use my xbox one and Laptop through these adapters. So when i set it up and pluged the ethernet cables into the router the broadband light on the hub goes orange and the broadband is lost unitl i take out one of the ethernet cables and reset the hub it works fine with just one. 
    I just really want to know why i cant have more than one ethernet cable plugged into the hub.
    Solved!
    Go to Solution.

    You can only connect one broadband extender to the home hub. This must be designated as the Access Point. All the rest need to be slaved to that Access Point. These need to be individually "paired" to the AP one connected to the home hub.
    You can still use the other ports on the home hub for direct Ethernet connections.
    If you try and connect more than one extender to a home hub Ethernet port, you will create a loopback, which will crash the home hub.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Using more than one USB input device with Logic

    I have 2 USB mic's that I would like to record to separate tracks in Logic Express. The research I've done seems to indicate that this is not possible because an audio interface is required for more than one input device of any kind. Is there any way around buying a $150 audio interface? If so, I'll complicate things further, the mics are SAMSON CU10's and logic does not recognize them unless you set them up with the Aggregate device editor. Another configuration I would like to use in a Line6 USB guitar interface on one track and a Samson USB mic on another. Any options or do I need to buy an audio interface?

    The line 6 is an interface. Try setting up the mic & the Line 6 as an aggregate device-I'm not sure if you can couple two ag's together or not. Barring that, Lexicon's Alpha has dropped to $80.oo, I'm getting set to but one today.
    -d

  • How do I use more than one USB device with Airport Extreme?

    I would like to plug a shared hard drive into my new airport extreme and still be able to plug in a shared printer as well. How am I supposed to do this with only one USB port. Do I use a USB hub???
    Is it possible to connect a hard drive using one of the ethernet ports?

    To use multiple USB devices you would use a powered USB hub.
    You can connect a hard drive to one of the Ethernet ports providing the hard drive is a NAS and supports Ethernet connections. In that situation the NAS hard drive is just like any other Ethernet client and the AirPort Extreme base station (AEBS) does not handle the file sharing services. The drive itself would provide the file sharing services.

  • Using more than one camera at the same time..

    Hello every body..
    I have a problem with dealing with java media frame work and i want to solve the problem as fast as i can since it will delay my work..
    I hope that any one can hep me..
    I post this problem previous but i don't have agood answer i want to knew if this problem can be soved or not and if can be solved How???
    The problem:
    If any one use JMF Studio it is known that any one can captre any device connected such as ( camera , mic,...) using JMFStudio..
    I do the capturing very well but the problem i face it is HOW I CAN CONFIGURE MORE THAN ONE CAMERA AT THE JMF??
    If i connect 2-cameras from different types ( sony , web cam) then the jmf registary will register the 2-cameras with only one difinition is( vfw:Microsoft WDM Image Capture (Win32):0 ) so when i use the java code to access the 2-cameras then i found only one difinition for one camera and i can access only one camera!!!!!!!!!
    I don't know how i can solve this problem??
    please help me !!
    For reply or any information contact me at my e-mail
    [email protected]

    Please Help me .....!!!!
    If the Sun Community Forums don't Help me who will help me at my problem??????!!!!!
    Help Me!!1

  • Can I use more than one USB 6008 in the same program?

    I am working on a project that may require up to six USB-6008 modules.  Before I purchase more I need to know if I can use all six at a time in the same Lab View program.  Can anyone help?
    Solved!
    Go to Solution.

    Hello Nick,
    LabVIEW is able to handel that number of DAQ tasks quite easily, however you must remember that USB has a maximum bandwidth. Therefore you would have to ensure that you have enough USB hubs on your PC. Typically there are between two to four USB slots per hub and each of these will have a maximum throughput rate which will divided between all devices attached to that hub. Therefore although you may have four USB DAQ devices attached to four USB ports if they are on the same hub you may notice greatly reduced rates of data transfer. What I would suggest rather than purchasing six or more USB 6008, why not purchase one PCI card which is able to handel many more inputs with a larger bandwidth.
    Regards
    Andrew George @ NI UK

  • Is it possible to use more than one external hard drive for Time Machine backups?

    I want to use two hard drives for Time Machine backups.
    Bigger one keep at home and be sure it is safe.
    Second one (very small pocket size) keep with me for travels.
    I want to backup to both drives to be sure I can restore everywhere and to be sure if something bad happened with my small travel disk I can restore from home backup.
    Is there any problem with listed schema? Is it normal for Time Machine to handle backups for different drivers and keep everything consistent and smooth?

    I really need some help!  I have been using an Iomega NAS 1TB HD for the past year.  And I received an error message.  I believe I have ran out of memory on this drive.
    Then recently in the last couple of months I got a ReadyNAS Duo 2TB with 2TB RAID.  Should I switch my back ups to this one and delete the other back up file or keep the old back up image file on the Iomega?
    Can I transfer the old image back up to this new ReadyNAS? How do I do this?
    I appreciate any help.

  • I need to connect my iPad to a projector and USB ports. What do I need to do this and where can I get the suitable fittings? I really need to have more than one USB connection port. Help

    I need to connect my iPad to a projector and have USB ports. What do I need to do this and where can I get the suitable fittings? I really need to have more than one USB connection port. Help

    You can connect via a cable or wireless using an Apple TV.
    http://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htm
    Connect an iPad to a Television or Projector
    http://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-connect-ipad-to-tv-te levision-projector.html
    Connecting iPad iPhone or iPod to TV or Projector
    http://www.disabled-world.com/assistivedevices/computer/ipad-tv.php
    iPad Accessories: Connections for a TV or Projector
    http://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.html
    You may be interested in AirPlay on the Apple TV:
    http://www.apple.com/airplay/
    Alternately, there are Apple Digital AV Adapters for hardwired connections:
    http://support.apple.com/kb/ht4108
    If your location does’t have wifi to use with the Apple TV, use a portable router.
    Portable routers http://compnetworking.about.com/od/routers/tp/travel_routers.htm
     Cheers, Tom

  • How can I get more than one firewre port ?

    Hello,
    how can I get more than one firewire port ? I'd like to be able to connect my canon HV30 camera as well as my firewire external HD at the same time so I can use firewire to upload the videos I've taken. Is this possible?
    TIA

    Hi ginestre-
    Many FireWire hard drives have 2 firewire ports so that you can daisy-chain devices and connect the camera that way.
    Daisy-chaining is not the most reliable method, but it works, so you could buy a FireWire hub.
    Luck-
    -DP

  • Using more than one input device at the same time

    Is it possible to use more than one input device at the saem time in logic express. For example I have a fire wire input device and a usb input device can I get Express to recognize both of these at once and so have a total of 4 ins which would be great since Im transfering tracks off my ADAT and it would be less track to have to line up.
    Thanks

    Hi,
    yes, it should be possible by creating an aggregate device. Google for it or search this forum. There are many tutorials how to set it up.
    Have fun!
    Fox

  • How can I use more than one Data Provider in my web Apps

    I am trying to use two different data provider in my web apps to run two different queries from the same table ,the data provider A is working correctly but when I attempt to run data provider B ,It display an error page ,here is the error message : Exception Details :javax.servlet.ServletEx ception
    java.lang.RuntimeException: java.sql.SQLException : Cannot connect .Both dataSourceName and url properties are null.

    Hi,
    You can use more than one data provider in your application. However if you have defined a dataprovider for a particular table already, and wish to bind a component, select the component and use its context menu to Bind to Data...

  • Can I use more than one Apple ID on one device

    I have seen some answers to this type of question before but not that since the ios 6 so will ask again. My household shares an Apple ID and it has worked great as we have added devices and purchased apps.  My problem now is this, we have hit a point where I have work things on my iPad and iPhone that I really don't need to be shared with the whole family but it isn't a major deal or security risk. I don't want to give up the advantages of having the household ID.  Is there an easy way to have another ID on my iPad and switch between them without having major complications?  I am for the most part a techie so not afraid of these kind of things but I can't afford to lose everything right now and take the time to set it all back up so getting advice here.  Thanks in advance for any help you can give.

    You can use more than one apple id, but keep in mind that when apps need updating that you'll will need to sign in with correct credentials to update them.
    Share an apple id for the itunes and app stores, but keep your own for icloud, facetime and messages.
    Managing and Sharing multiple id's with your family
    http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/

  • Can we use more than one Help Provider class in a same project in ADF11g

    Hi All,
    There are two help providers i want to use .They are "ResourceBundleHelpProvider","OHW Help Provider"
    In adf-settings.xml file
    <help-provider>
    <help-provider-class>oracle.adf.view.rich.help.ResourceBundleHelpProvider</help-provider-class>
    <property>
    <property-name>baseName</property-name>
    <value>com.symmetry.dashboard.panels.Help</value>
    </property>
    </help-provider>
    if try to register both help providers confliction occurs. Is it possible to register and use more than one help provider.?
    Thanks in advance.:)

    Thanks Frank,
    In adf-settings.xml file
    <help-provider>
    <help-provider-class>oracle.adf.view.rich.help.ResourceBundleHelpProvider</help-provider-class>
    <property>
    <property-name>baseName</property-name>
    <value>com.symmetry.dashboard.panels.Help</value>
    </property>
    </help-provider>
    <help-provider prefix="RB_">
    <help-provider-class>oracle.help.web.rich.helpProvider.OHWHelpProvider</help-provider-class>
    <property>
    <property-name>ohwConfigFileURL</property-name>
    <value>/myHelpset/config.xml</value>
    </property>
    <property>
    <property-name>baseURI</property-name>
    <value>http://127.0.0.1:7101/Dashboard_workflow/myHelpset/%3c/value>
    </property>
    </help-provider>
    I differentiated the help providers with the "prefix" attribute in the <help-provider> tag. So now confliction is not occuring between those.
    I used this prefix in the "helpTopicId" property of the adf components like "input text box" . I got the result. :)

Maybe you are looking for