Using omwb2003 gives error #5

Attempting to run omwb2003 on an .mdb created in Access 2003 I get the following error. Several developers in our office have tried with the same results. Also on omwb2002.
Application Error
Error # 5:Invalid procedure call or argument
OK
Any suggestions?

Hi,
Just to ensure you're using the latest version of the Exporter tool, can you confirm that you are using the Exporter Tool shipped as part of the Application Migration Workshop, and not the version shipped with the latest version of the Oracle Migration Workbench?
Previously I have seen as issue regarding the use of some DATE default values, namely when using a combination of DatePart calls within the one default value setting. Would you have any such default values set in your database?
Regards,
Hilary

Similar Messages

Loading big XML files using JDBC gives errors

Hi,
I've created a XMLType table using binary storage, with the restriction that any document stored has a (any) schema:
CREATE TABLE XMLBIN OF XMLTYPE
XMLTYPE STORE AS BINARY XML
ALLOW ANYSCHEMA;Then I use JDBC to store a relatively large document using the following code:
Class.forName("oracle.jdbc.driver.OracleDriver").newInstance();
String connectionString = "jdbc:oracle:thin:@host:1521:sid";
File f = new File("c:\\temp\\big.xml");
Connection conn = DriverManager.getConnection(connectionString, "username", "password");
XMLType xml = XMLType.createXML(conn,new FileInputStream(f));
String statementText = "INSERT INTO xmlbin VALUES (?)";
OracleResultSet resultSet = null;
OracleCallableStatement statement = (OracleCallableStatement)conn.prepareCall(statementText);
statement.setObject(1,xml);
statement.execute();
statement.close();
conn.commit();
conn.close();Loading a file of 61Mb (real Mb, in non-IT Mb (where 1Mb seems to be 10^6) it is 63.9Mb) or less doesn't give any errors, loading a file bigger then that gives the following error:
java.sql.SQLRecoverableException: Io exception: Software caused connection abort: socket write error
        at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:101)
        at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:112)
        at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:173)
        at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:229)
        at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:458)
        at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:960)
        at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1222)
        at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3381)
        at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3482)
        at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:3856)
        at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1373)
        at jdbctest.Tester.main(Tester.java:60)A succesful insert of a 63Mb file takes about 23 seconds to execute. The 70Mb file fails already after a few seconds, so I'm ruling out any time outs.
I'm guessing there are some buffers that need to be enlarged, but don't have a clue which ones.
Anyone any idea what might cause the problem and how to resolve?
My server runs Oracle 11g Win32. The client is Windows running Sun Java 1.6, using ojdbc6.jar and Oracle 11g Client installed.
Cheers,
Harald

Hi Mark,
The trace log in the OEM shows me:
Errors in file d:\oracle11g\app\helium\diag\rdbms\helium\helium\trace\helium_ora_6948.trc (incident=7510): ORA-07445: exception encountered: core dump [__intel_new_memcpy()+613] [ACCESS_VIOLATION] [ADDR:0x0] [PC:0x6104B045] [UNABLE_TO_WRITE] [] If needed I can post the full contents (if I find out how, am still a novice :-))
Cheers,
Harald

Send email using SKPSMTPMessage gives error "The oparation could'nt be completed" ?"

- (void) sendMessage{
SKPSMTPMessage *testMsg = [[SKPSMTPMessage alloc] init];
    NSString *myString;
    testMsg.relayHost = @"smtp.gmail.com";
    testMsg.requiresAuth = YES;
    testMsg.login = @"[email protected]";
    testMsg.pass = @"my password";
    testMsg.subject = [NSString stringWithFormat:@"Client iPhone App - %@", self.navigationItem.title];
    testMsg.bccEmail = emailField.text;
    testMsg.wantsSecure = YES; // smtp.gmail.com doesn't work without TLS!
    testMsg.fromEmail = emailField.text;
    NSString *ff = [[UIDevice currentDevice] uniqueIdentifier];
    NSString *gg = [[UIDevice currentDevice] model];
    NSString *hh = [[UIDevice currentDevice] localizedModel];
    NSString *ii = [[UIDevice currentDevice] name];
    NSString *jj = [[UIDevice currentDevice] systemName];
    NSString *kk = [[UIDevice currentDevice] systemVersion];
    NSString *path;
    if ([self.navigationItem.title isEqualToString:@"Request Authorization"])
        path = [[NSBundle mainBundle] pathForResource:@"ThankYou" ofType:@"txt"];
        testMsg.toEmail = @"my other [email protected]";
    else
        path = [[NSBundle mainBundle] pathForResource:@"ThankYou2" ofType:@"txt"];
        testMsg.toEmail = @"my other [email protected]";
    testMsg.delegate= self;
    NSString *fileText = [NSString stringWithContentsOfFile:path];
    myString = [NSString stringWithFormat:@"LEADERS %@-\n\n%@\n\nName: %@\nCompany: %@\nAddress: %@\nCity: %@\nState: %@\nZip: %@\nPhone: %@\nFax: %@\nEmail: %@\nComments: %@\nRequire New Merchant Account: %@\nReferral Code: %@\nIdentifier: %@\nModel: %@\nLocalized Model: %@\nName: %@\nSystem Name: %@\nSystem Version: %@",self.navigationItem.title,fileText, firstNameField.text,companyField.text,addressField.text,cityField.text,stateFie ld.text,zipCodeField.text,phoneField.text,faxField.text,emailField.text,countryF ield.text,customerIdField.text,lastNameField.text,ff,gg,hh,ii,jj,kk];
    NSDictionary *plainPart = [NSDictionary dictionaryWithObjectsAndKeys:@"text/plain",kSKPSMTPPartContentTypeKey,
                               myString,kSKPSMTPPartMessageKey,@"8bit",kSKPSMTPPartContentTransferEncodingKey, nil];
    testMsg.parts = [NSArray arrayWithObjects:plainPart,nil,nil];
    [testMsg send];

Ok.. I see the app now in iTunes.
Best thing to do is email the developer of that app.
You can do that here > http://www.lymobilesoft.com/contact.html
Make sure and tell them exactly what the error says:
it gives me the error 'Your request could not be completed'.
Instead of using a third party app, you can download movies directly from the iTunes store.

DB Instance creation using DBCA Gives ERROR

Hi All,
I am getting below error while creating a new DB instance using DBCA. Initially I thought it could be a problem of the oracle version. But I checked it is Oracle 10G server version 10.2.0.1. I got it re-installed 3 times, but still same issue. Please help !!!
ORA-31011: XML parsing failed
ORA-06512: at "XDB.DBMS_XMLSCHEMA_INT", line 3
ORA-06512: at "XDB.DBMS_XMLSCHEMA", line 14
ORA-06512: at line 143

I remember that issue from long long ago, for that old version, although I didn't encounter it that often.
If I am not mistaken, I solved it by running @?/rdbms/admin/catqm after creation (a multiple times?) and @?/rdbms/admin/utlrp
Maybe the following will help/assist in solving the issue: http://www.liberidu.com/blog/2009/07/13/howto-clean-xml-db-install/

Java 1.5 plugin download using Object gives error

In my website i show applet .My applet requires jvm 1.5 .When user not has support for 1.5 then it ask for installing .I use object tag .
<OBJECT classid="clsid:CAFEEFAC-0015-0000-0000-ABCDEFFEDCBA"
width ="200" height="200"
codebase ="http://java.sun.com/update/1.5.0/jinstall-1_5_0-windows-i586.cab#Version=1,5,0,0">
param value
<comment>
</comment>
</OBJECT>
in between installation it says incorrect location .
Can anyone please give what is the correct class id and path for it
Thanks

Reinstall Lion and then http://support.apple.com/kb/DL1572

HT1212 iPhone diabled, tried to use iTunes to restore, but iTunes gives error message (0XE8000084). Now what to try to reset iPhone?

iphone disabled, tried to use iTunes to restore, but iTunes gives error message (0XE8000084). How to restore iPhone?

Try here = http://support.apple.com/kb/TS3221

Workflow status web part gives error when going back to previous stage (using GO TO) in Project Server 2013 workflow

Hi,
Workflow status web part gives error when going back to previous stage (using GO TO) transition activity in Project Server 2013 workflow.
Please guide how to create a workflow which restarts from a desired stage.

Thanks for your prompt reply....
It gives following error
Workflow Status
This Web Part was unable to load.
Information that may be useful in solving this problem was written to the Unified Logging Service (ULS) log on the Project Web App with the following ID: e95a9c9c-1f68-90d7-0a3e-5951df70fec6
For more information, contact your Project Web App administrator.
what do you mean to restart the Project Server 2013 with different project name, please elaborate....

AI Control gives error: 10452 occurred at AI control. Possible reasons: NI-DAQ LV no interrupt level is available for use.

How can I run out of interrupts while accessing my DAQPad? Does
the community have troubleshooting suggestions?

You don't say which DAQpad. If this is a device on your parallel port then
you will need to make sure that the parallel port has an interrupt assigned
and not just a base address.
Check out the following from the NI Knowledgebase:
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/bf7960eb90
ef882a8625654e007d8b1a?OpenDocument
Ian
"Riverside Consulting, LLC" wrote in message
news:[email protected]..
> AI Control gives error: 10452 occurred at AI control. Possible
> reasons: NI-DAQ LV no interrupt level is available for use.
>
> How can I run out of interrupts while accessing my DAQPad? Does
> the community have troubleshooting suggestions?

After upgrading to Lion Image Capture does not work, even though it is intel software. Gives error 9931. What gives?

After upgrading to Lion, Image Capture does not work, even though it is intel software. Gives error 9931. What gives?

Ouch, if it is indeed damaged, then sadly you need to restore the whole danged huge OS!
Didn't used to be this way before Lion/10.7.
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

GI installtion gives error while executing root.sh for ASM diskgroup

Dear Gurus,
We are implementing a 2 node RAC configuration with ASM on vmware and openfiler on LINUX RHEL 6.2. We started our installation with grid infrastructure. While executing root.sh on node 1 it gives error diskgroup cannot be mounted and no alterntions perfomed as below.
+[main] [ 2012-10-04 05:38:33.150 PDT ] [UsmcaLogger.logException:173] SEVERE:method oracle.sysman.assistants.usmca.backend.USMDiskGroupManager:mountDiskGroups+
+[main] [ 2012-10-04 05:38:33.151 PDT ] [UsmcaLogger.logException:174] ORA-15032: not all alterations performed+
ORA-15017: diskgroup "CRS" cannot be mounted
ORA-15088: diskgroup creation incomplete
+[main] [ 2012-10-04 05:38:33.338 PDT ] [UsmcaLogger.logException:175] oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-15032: not all alterations pe+
rformed
ORA-15017: diskgroup "CRS" cannot be mounted
Note:- we are not using ASMLib. We presented the LUN's to oracle binaries with Multipathing.

Put here relevant info of alertlog of ASM and CRS.
Please format your text by using tag at begin and end of output.

Playing mp4 audio gives error message "Video can't be played because the file is corrupt"

Playing a particular mp4 audio file directly from a website link gives error message "Video can't be played because the file is corrupt". However other mp4 audio files from this same website do work correctly. What can I do to get all the the mp4 audio files to play directly from the same website? I must have the correct plugins, etc. since the other files play. This file is not playing from YouTube, is it on the website.
Thank you for your help.

What is the link to the site and file in question?
MP4 files should be handled by Firefox itself, not a plug-in.
# Click the ≡ Menu Button and choose Add-ons.
# Click Plugins.
# Set every plug-in to "Never Activate".
# Try loading the file again. Is there any difference?
You have two versions of Flash Player installed. Perform a clean installation of Flash Player as follows.
# From the following page, save the uninstaller somewhere handy, like the desktop.
#* [http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html#main_Download_the_Adobe_Flash_Player_uninstaller Uninstall Flash Player for Windows | Adobe Support]
# From the following page, save the installer for other browsers. If you also use Flash Player in Internet Explorer, also save the ActiveX version.
#* [http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#main-pars_text_4 Direct downloads of Flash Player for Windows | Adobe Support]
# Exit all applications.
# Run the uninstaller.
# In Windows Explorer, try to open the following folders. If they still exist, delete them manually.
#* <pre>C:\Windows\system32\Macromed\Flash\</pre>
#* <pre>C:\Windows\SysWOW64\Macromed\Flash\</pre>
#* <pre>%AppData%\Adobe\Flash Player\</pre>
#* <pre>%AppData%\Macromedia\Flash Player\</pre>
# Restart your computer.
# Run the installer for other browsers.
# Run the ActiveX installer if you downloaded it.

While Changing the status system gives error

Dear Experts,
In Solution Manger, While changing the status from Tcode SE38 with Program CRM_SOCM_SERVICE_REPORT system gives error.
Document 8000002519 refused for technical reasons: ERROR_FREE
Message no. SOCM_ACTION_LOG203
Diagnosis
The status value cannot be changed.
The document may no longer be modifiable as a result of its status, or it may be being edited by another user.
System Response
This change transaction is skipped during report processing.
Procedure
Analyze the corresponding document during transaction processing and perform the status change manually if necessary.
Also if i select the status as in process, then it executes sucessfully. Please help me in this.
Ramesh Jaiswal
9867936636

Hi Ramesh,
Pls check your SP level because till SP17 this (CRM_SERV_REPORT) Tcode is not present
I just checked.
So it seems this is availabe only after SP18.... we can use the above report.
Kindly confirm once you solve your problem.
Dirk
Can you please tell us a document which wil tel us what technical things have been changed in this new SP18.for e.g the source for this information.
Regards
Prakhar

Select query gives error in Code inspector and extended program check

Hi,
I have a query .
SELECT pernr
FROM pa9100
INTO TABLE t_nca_tab
WHERE endda EQ c_date AND
z_nca_required EQ c_yes.
This query gives me an error in Code inspector like :
Large table pa0001: No first field of table index in WHERE condition
I have one more query that gives error in extended program check
SELECT SINGLE stell ename
      INTO (g_stell, g_name)
      FROM pa0001
      WHERE pernr EQ wa_nca_tab-pernr AND
            endda EQ c_date.
The warning says:
*In "SELECT SINGLE ...", the WHERE condition for the key field "SEQNR" does not
test for equality. Therefore, the single record in question may not be unique.*
Its too urgent.
Please reply.
Regards,
Binay.

The first field is PERNR .. so if UR not giving pernr it will fetch
all the data from the said table and between the given dates ..
Check if this is your requirement ...
write the select as ...
where r_pernr is a range ...
SELECT pernr
FROM pa9100
INTO TABLE t_nca_tab
WHERE pernr in r_pernr <----
             endda EQ c_date AND
             z_nca_required EQ c_yes.
As UR using select single it's expecting to use all the key
fields in the where condition ...
U can ignore this warning message

XL Reporter gives Error after updating from PL 25 to SBO 2005 B PL 38

Thnaks Shridhar,
I have tested it in PL 38, its work fine but it has occoured one more problem i.e. XL Reporter is not working now.
However I have updated XL Reporter to PL30, but it gives error.
It has reamed used userdefined fields of the report. I have correct it too. But it gives error " Expansion has problem ".
Can any body has idea for running XL reporter successfully after updating patch level.
Can any one has faced this error or have solutions.
Pl. Help. so that i can updating it to Final Live Database.
Warm Regards,
Chintesh Soni

Hi..Shridharan,
Thanks for reply and guidance....!!
But I have successfully installed the XL Reporter means upgraded.
Now, When I am running existing reports which are preapred in previous version, is not running. It gives error i.e. Expansion has problem.
B4 this error, it has shown me some other error for user defined field was not found, when i have checked, the upgradation of patch level has changed the name of UDFs.
I have modified the udf names in the report.
Can u identify wht is the problem exactly please..
With Warm Regards,
Chintesh Soni

Can't sync songs after 14 gb, itunes gives errors!! Please help!

Hello to everyone, I'm using an Ipod classic, 6th generations, 2009 and i am using itunes with windows 8.1. After the new update of Itunes, i couldn't sync new songs to my Ipod, Itunes shows a lot of erros like 50, 53, 13039. I read and tried a lot of solutions to solve it, i uninstall the Itunes and reinstalled the latest version, it didn't help, i restore, reboot my ipod it didn't help, i deleted my whole library, i tried different cables to plug in, i used all of my usb slots, none of them has helped me!! I'm so close to throw my Ipod out!! I need some help and advice. I could be allowed to sync aprox. 14 gb of songs, but after the remaining space comes to 130 gb (or some other equal space) it starts to give errors that i mentioned above. The only thing that i didn't give a try is trying syncing my ipod with another pc. Is there anybody to help me? What can i do? I guess the problem is with my ipod's harddisk, i hope it is not, i don't want to pay money to get it repaired! All kind of helps will be appreciated! Have a nice day!

Thank you, but I did that. I de-selected and then re-selected but because the 13019 still won't allow the sync, all it did was completely delete everything on my Ipod! I now have no songs on my Ipod when at least before, I had all my songs but the new 12 songs! I'm freaking!

Using omwb2003 gives error #5

Similar Messages

Maybe you are looking for