Using one datasource for attributes and text?

I am currently loading master data from a flat file using a data source. The flat file contains master data attributes as well as master data text. Is there a disadvantage of using just one datasource (for attributes) to load attributes AND text or is it better to create two data sources, one for attributes and one specifically for text?
So far, the one datasource only approach seems to work, but I am trying to understand the impact if I use an attribute data source to load text. Will this cause any problems or hurt performance?
Thank you,
Dennis

Hi Dennis,
it depends on your requirements... I've never came across any problems loading hierarchy, text and attribute master data with a single data source. If one source file is containing all information this should be the fastest way to load master data, using several data sources means processing one input file several times.
I would prefer modeling different data sources for master data because it is easier to adapt your solution if input format changes. Also system is easier to understand (e.g. process chains) / handle if several persons are involved... but from a technical view there should be no disadvantages.
Best regards,
Björn

Similar Messages

Use one account for apps and other for itunes match

Hello everybody
My question today is quite simple. I use one account for apps and tv shows, but inwant to use a different itunes account for purchasing itunes match. How can I use them both on my devices? Will it be asking for my user-pass each time i play a song? What other thing should i consider?
Thank you in advance

I would strongly recommend you not do this. You will regret it.
I have played with this issue a lot. You have to remain signed into match in order for it to show up on your phone. If you sign out to purchase an app or redownload one from your appstore id you use then match will be removed from your phone and when you go into your music app the icloud will not be there. You then have to go sign back out of the store id you used for your app purchase and then sign back into match and everything will have to go though the download to your device process again. This really is not what you want to do.
Sign up to match with the apple id that you know you will use the most or has the most purchased items and use that for all purchases, i.e. books, apps, movies, and music. You don't want to go though the other process.
Plus apple will start not letting you sign into match because you signed out and back in, in to short a period of time.
all store purchases on an iphone are linked to the store id. if you sign out of your match id on the appstore and sign into another account to purchase an app then itunes match will sign out in the music app. You can't have two store id's signed into your iphone at the same time. They are all linked together.

Shall I use one datasource for multiple connection pool?

Hi,
I need to clarrify that, Shall I use one Datasource for multiple connection pool in distributed transaction?
Thanks with regards
Suresh

No. If its transactions across multiple databases you should use different datasources.

Master data loads for Attributes and texts failing

Hello
Master data loads for Attributs and texts are failing. The error is
1. Lock Not set for Loading master data attributes
2.Table /BI0/YAccount does not exists (this error is for 0Account master data - attribute load)
3.Error 1 in the update.
We had faced this error few days ago and rebooting the server resolved the error but it has recurred after 4 days.
RS12 and SM12 do not show any locks. Activating the info object has also not resolved the error.
Any insight is appreciated.
Thanks
Inder

Hello
Master data loads for Attributs and texts are failing. The error is
1. Lock Not set for Loading master data attributes
2.Table /BI0/YAccount does not exists (this error is for 0Account master data - attribute load)
3.Error 1 in the update.
We had faced this error few days ago and rebooting the server resolved the error but it has recurred after 4 days.
RS12 and SM12 do not show any locks. Activating the info object has also not resolved the error.
Any insight is appreciated.
Thanks
Inder

Ho do I use one monitor for OSX and Windows 8.1 bootcamp

I am a long time Mac user, but find the fairly recent Apple switch to thunderbolt for monitor input very frustrating.
For several years I have ran a Mid 2010 IMac 27" and input video from a Mac Mini running Boot Camp Windows 7 using Target Display Mode on the IMac.
This worked fine until I upgraded to a Late 2013 27" IMac and discovered that the IMac has moved to thunderbolt as the input for Target Display Mode. The new late 2013 27" IMac just will not display native Windows 7 or 8 from a Boot Camp Mac anymore.
My problem is that I have two business/job related Windows apps that must run on a native windows 7 or 8 platform, and won't function under either Parallels or VMWare Fusion.
I have tried.
And there appears to be no way to get any Windows machine with DVI or Mini Display Port output to drive a late 2013 IMac in Target Display mode.
So, with great frustration, I have concluded that I need to purchase a non-Apple 27-30" monitor, and drive it with either a Mac Mini, or my Early 2013 15" MacBook Pro retina, running one of the Macs into on of the mini-Display Ports on the monitor and a native Windows 7 or 8 machine into a second mini-display port, switching between the two video inputs. The Dell 30" monitor seems to get the nod.
Has anyone found a better solution to switching between OSX and native Windows on one monitor?
Thanks...

Hi William,
I had the same experience in December 2013 and contacted Apple about it. According to Apple it's an issue of Windows with Thunderbolt. Your older iMac from 2010 is using DisplayPort and not Thunderbolt for the Target Display Mode. Note that just the connector looks the same but it's still a different technology. Please further note that the response below does not apply for the new iMac 27" with the 5K display because this iMac does not support Target Display Mode at all, hence can't be used as external display. Of course you can still attach one or two external displays to the iMac 27" 5K.
Hope this clears things up for you and the others.
Thanks,
Martin
So, here is the important part of the official response from Apple:
"... The Thunderbolt controller in an iMac is running exclusively in host mode. As such it cannot emulate a device mode Thunderbolt display. Instead it implements a custom Target Display Mode protocol that shares video between two peer to peer machines running with both controllers running in host mode. The "client" side of the driver does not exist on Windows so windows cannot speak to the "server" half in the iMac. There are no plans to implement a client driver for Windows since there is no Thunderbolt SW stack available for Windows. The reason this used to work is that the older iMacs used DisplayPort for Target Display Mode. In this scenario the iMac was able to expose the panel in such a way that it looked exactly like a Display Port Device which Windows does have driver support for. ... "
Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support

My husband and I both have iPhones . How do I use one account for purchases and keep the email separate when using iCloud?

My husband and I both have iPhones . How do I use one iTunes account to share music, photos and apps, and keep our email accounts separate since all data will use the iCloud function.

You shouldn't be using the same account on phone iphones. Have him setup his own and make sure his iCloud is logged in with that one

How to use one NIC for everything and the other to allow ssh from

Hello,
I have two internet connexion at home:
- a cable connection (CABLEBOX) that i use for all of my devices as it's the fastest. All my computers are connected to it using ethernet or wifi.
- an adsl connection (ADSLBOX) that is connect to the second network card of one of my computers (MEDIABOX) only and that i want to use only to ssh that same device from the outside
I want that specific computer to use its:
- NIC1 to connect to the LAN and to the internet. Routing is enabled on CABLEBOX.
- NIC2 to connect to that device from the outside using ssh. ssh-D should also work through NIC2 as i need to be able to use that computer as a proxy on some occasions. Routing is enabled on ADSLBOX and it's set to port forward the port 22 to MEDIABOX.
Once this will be working i'd like to also route ftp connections to specific ips by NIC2.
No firewall is set on MEDIABOX yet, i'll do it later on.
I know basics on how to set routing rules, how to assign a specific LAN to a network card but i have a hard time on deciding which rules i should set...
Can someone guide me?
Thanks in advance
Last edited by parpagnas (2013-12-03 18:31:31)

A possible solution might be this.
On ADSLBOX and CABLEBOX configure different subnets for the LAN, e.g.
ADSLBOX: 192.168.1.0/24
CABLEBOX: 192.168.2.0/24
The MEDIABOX gets these static IPs:
ADSL-LAN: 192.168.1.2
CABLE-LAN: 192.168.2.2
On the MEDIABOX, configure the two network interfaces using two routing tables.
The ADSL-LAN routing table
ip route add 192.168.1.0/24 dev eth0 src 192.168.1.2 table 1
ip route add default via 192.168.1.1 table 1
The CABLE-LAN routing table
ip route add 192.168.2.0/24 dev eth1 src 192.168.2.2 table 2
ip route add default via 192.168.2.1 table 2
The main routing table
ip route add 192.168.1.0/24 dev eth0 src 192.168.1.2
ip route add 192.168.2.0/24 dev eth1 src 192.168.2.2
# use the CABLE-LAN gateway as default, so general internet traffic from MEDIABOX runs over CABLEBOX
ip route add default via 192.168.2.1
define the lookup rules
ip rule add from 192.168.1.2 table 1
ip rule add from 192.168.2.2 table 2
To test the setup:
ip route show
ip route show table 1
ip route show table 2
I don't know how to persist something like this in ArchLinux using netctl. Might require to write a special systemd unit for it. Above is a working example from a RedHat box at my company.
Last edited by teekay (2013-12-04 07:42:22)

I am setting up a Numbers table for gas milage using one column for gallons divided by the next column of miles and having the answer in the third column in miles per gallon.

I am setting up a Numbers table for gas milage using one column for miles and the next column for gallons, the two to be divided to produce the third column of miles per gallon and am unable to find out how to do that. Add and/or subtract, yes, but not to divide.

...and results in yield signs indicating an error:
Hi Wayne,
Yield signs must be different in Texas. Here (and in much of the rest of the world) they're white with a red border, and installed with an apex pointing down:
Some still include the word "Yield" (or in Quebec, "Cedez"in black letters.
Maybe you're thinking of the "Warning triangle", which is similar, but installed base down, and often including a symbol in the white space:
These are more common in Europe, with the exception of the portable version, which I've seen used at road construction sites or as 'flares' to warn of a disabled vehicle on the road.
Or maybe you were thinking of this
(Most of these 'slow moving vehicle' triangles have an orange center. This one looked a bit more 'Texas,' though.)
Cheers,
Barry

How are attributes and texts for a master data linked and targeted to ...?

Our previous consultants used to load data to master data 0MATL_GROUP.
1. RSA1 -> InfoProvider -> Select 0MATL_GROUP or 0MATL_GROUP___T
Check these above two and find the records loaded are both 1,216 for Language EN.
We check the data flow of this master data (0MATL_GROUP or 0MATL_GROUP___T) and find there are four branches which target 0MATL_GROUP:
branch 1: 0MATL_GROUP is itself an InfoSource and the datasource is 0PROD_CATEG_R3_MAP_ATTR. However under this datasource, there is no any InfoPackage, i.e., the system doesn't load data to 0MATL_GROUP through this branch.
branch 2: Through InfoSource 0MATERIAL_ATTR. However the InfoPackage under this InfoSource target data load to 0MATERIAL but not 0MATL_GROUP, i.e., the system doesn't load data to 0MATL_GROUP through this branch.
branch 3: Through InfoSource ZMATL_GROUP_ATTR and it's corresponding datasource Z_MAT_GROUP_ATTR. InfoPackage monitor shows the data load record for this datasource is 490 (Run RSA3 on R3 for this datasource also gives the same record count).
branch 4: Through InfoSource 0MATL_GROUP_TEXT and it's corresponding datasource has the same name. InfoPackage monitor shows the data load record for this datasource is 1190 for Language EN (RSA3 on R3 for this datasource gives the same count for language EN).
2. InfoObj. 0MATL_GROUP
1). Master data tab (/BI0/PMATL_GROUP): 526
2). Text table (/BI0/TMATL_GROUP):
1657 (includes both EN and other lan-guages), for EN: 1190.
3. Check R3 Table T023T (Material Group Descrip-tions) for EN: 1190.
Our questions are:
1. The InfoProvider 0MATL_GROUP and 0MATL_GROUP___T
both have counts of 1,216 for Language EN. And for the four branches in the data flow, only 3rd and 4th branches feed data to it. 3rd branch (datasource Z_MAT_GROUP_ATTR) feed count is 490 and 4th branch (datasource 0MATL_GROUP_TEXT) feed count is 1190 for Language EN. We wonder how attribute and text data are corelated to each other and with it's master data. Obviously 1,216 is not equal to the sum of 1190 and 490, the how 1190 (text) and 490 (attribute) constitute the master data count 1,216?
2. Do we have to use 1st and 2nd branches to feed data to 0MATL_GROUP?
3. How InfoObj. 0MATL_GROUP Master data tab (/BI0/PMATL_GROUP) shows the count is 526? it should be 490 from the custom datasource Z_MAT_GROUP_ATTR, right? But why the count is different?
We would be appreciated any expert input!

Kevin,
can you check the data in Material Group charecterstic againest R/3. One moe thing check how these 4 branches Mapped to material Group?
Take the for Attributes it should be 490. it is 525. try to analyse what are the extra records comparing with Source. take the you found so and so meterial group extra then analyze from where is it getting extracted to BW i mean which DS.. (either branch 1 or brach 2 or branch 3 or 4). then check in R/3 side DS for the 4 branches. then you will know what exactly happening.
Analyze the data from step by step from r/3 to BW for each level. You will get clue.
Nagesh.
Message was edited by: Nagesh Ganisetti

Can I use one account for both my labtop and my ho...

can I use one account for both my labtop and my home computer?
Solved!
Go to Solution.

Softthunder wrote:
can I use one account for both my labtop and my home computer?
Hello,
Yes you can. You can access your account using any Skype enabled computer/device in any country worldwide.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

HT204053 Dear Support Team, every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud???

Dear Support Team,
Every time i tried to logon Icloud its gives me wrong user name or password and at the end it show me error " This Apple ID is valid but is not an ICloud Account" then how can i use one account for same Apple ID and ICloud?
Thanks

It is not possible to create a new iCloud account using a Windows machine. You must create the account using a Mac (10.7.5 or more) or an IOS device (iPhone etc). Once that is done you can sign into and use the account on your Windows machine.

HT201328 I have been given permission for unlocking my iphone 3 GS from Orange. I want to set up the phone for my wife to use with a new number and carrier. Do I unlock under my itunes account first or set one up for her and then unlock the phone.

I have been given permission for unlocking my iphone 3 GS from Orange. I want to set up the phone for my wife to use with a new number and carrier. Do I unlock under my itunes account first ( I now have a new iphone on this account) or set one up for her and then unlock the phone. I am worried about upsetting the new phone.

I would complete unlocking as is and then
restore as new once you know the iPhone is unlocked
Be aware Orange will process the request at their speed
one of the reasons they usually reside at bottom of User Sat surveys
will likely take weeks
This may also help
http://support.apple.com/kb/HT5014

Any idea how you can safely use ONE computer for BOTH work and internet?

I'm planning to set up a small music project studio, built around a powerbook, that I will be sharing with a friend of mine. My friend is going to use the computer for music AND heavy internet use, but I will only use it for music work (off-line).
The thing is then that I am slightly worried about viruses, worms, spyware and similar unwanted stuff 'sneaking in' when the laptop is online. Even with firewall and anti-virus I guess there is always a risk.
Any idea if there is a way of keeping things completely separate?
How about if I had a bootable external hard drive for my work, with the Mac OS system on. Then when I'm working I could boot up from that drive (and use the computer off-line).
Maybe we could even remove the internal hard drive from the powerbook (?), and use the powerbook with two external hard drives instead: One bootable drive for me and another bootable drive for my studio partner (and then only connect one hard drive at the time).
Any idea if this would work well..? (I'm not sure if i.e. a virus could sneak in anyway, through the PRAM, L2 cache or the RAM or something similar) Or does anyone have any other suggestions...? Any ideas much appreciated. Thanks!

Not too much worry with Macs, but get an Ethernet Router, skip Wireless, use strong Passwords.
How about if I had a bootable external hard drive for my work, with the Mac OS system on. Then when I'm working I could boot up from that drive (and use the computer off-line).
Excellent idea, especially if the heavy Net user doesn't have Admin rights.
One bootable drive for me and another bootable drive for my studio partner (and then only connect one hard drive at the time).
Just about foolproof! Just need 2 more drives for backup. Not sure why you'd want to remove the internal HD though.
No Viruses yet in OSX land, in fact the only Malware I know about requires you to install it for itself!
You'll be OK, that separate drives idea is pure genius.:-)
Most don't need it on Macs, but here ya go on the Mac side...
ClamXAV, free Virus scanner...
http://www.clamxav.com/
Little Snitch, stops/alerts outgoing stuff...
http://www.obdev.at/products/littlesnitch/index.html
HenWen/Snort combo, that is a free MAJOR Firewall...
http://seiryu.home.comcast.net/henwen.html
Then the venerable old Brickhoues/Flying Buttress Firewall...
http://personalpages.tds.net/~brian_hill/downloads.html
WaterRoof is a firewall management frontend with bandwidth tuning, NAT setup, port redirection, dynamic rules tracking, predefined rule sets, wizard, logs, statistics and other features.
http://www.macupdate.com/info.php/id/23317
Monitor net usage...
http://mac.softpedia.com/get/Dashboard-Widgets/Information/Videotron-Internet-Us age-Monitor.shtml

Have iPad, iPod Touch and iPhone 4s. Can I use one charger for all

I have and iPad, iPhone 4S and iPod 4. Can I use one charger for all 3 and if so, which one. TZ all

You can use the iPad charger for all.

I have a mixer which i was using with my pc and now i bought a new macbook and it have only one jack for headphones and to use mixers i need jack for microphone too so what should i do

i have a mixer which i was using with my pc and now i bought a new macbook and it have only one jack for headphones and to use mixers i need jack for microphone too so what should i do

You need to get headset splitter adapter.
http://www.startech.com/Cables/Audio-Video/Audio-Cables/35mm-4-Position-to-2x-3- Position-35mm-Headset-Splitter-Adapter-Male-to-Female~MUYHSMFF

Using one datasource for attributes and text?

Similar Messages

Maybe you are looking for