Using one Viewcontroller project's taskflow in another Viewcontroller

Hi All
I am using jdeveloper 11.1.1.6.0.
I have a Viewcontroller project with few taskflows.
I have another Viewcontroller project with a menu.
I want to use taskflows in former ViewController project in the menu of the latter one.
While referring to Fusion Developer's guide, number of ways are given to do this,viz
build output dependency, deployment profile dependency, importing something using resource palette...etc.
But My question is what would be the most preferred way todo it.
Thanks

Reuse of task flows is best done by building a adfLib out of hte task flow and add this adfLib to the consuming view controller project.
Timo

Similar Messages

Using one thinkpad as a screen for another

Hello fellow thinkpadders,
I have an X1 Carbon and an X230, and I'm wondering if I can connect them in such a way that I can use one as the keyboard and the other as the screen. In other words, I'd like to have one at desk level and the other raised up about a foot and a half -- so that I can sit straight at a desk and not have to bend my neck forward (looking down) at the one I'm typing on.
Usually, I work with the X1C using a large screen at my desk and this isn't an issue. I also have the Lenovo ThinkVision LT 1421 14" portable screen (which is awesome) -- but it's only 200 nits, and on some occasions, working at my local library (where the light is quite bright), I've wondered whether I can simply bring along both computers, and prop one up (at a higher level) to use as a portable screen.
I know this sounds a bit crazy, but I'm quite tall, and the neck paid I feel using these things at a normal desk level renders them unusuable without an external screen.
Thanks!
Solved!
Go to Solution.

Hello,
Perhaps a program like Input Director, Mouse without Borders, Multiplicity, ShareMouse or Synergy will do what you are looking for?
Failing that, you could always connect a Lenovo ThinkPad USB Keyboard with TrackPoint to the system for use as an input device.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

How to use one ODSI project artifact as jar for other ODSI project?

Hi,
I am working on multiple ODSI proejcts in Same Server. My problem is how to call one projects resources in other ODSI project. I need this as Some of Data Services read the data from more then one database. The projects are in seprate Dataspace projects but they are deployed in same server. When I try to export artifacts from one projects and include them as Jar in other projects I am not able to see any Data service methods so unable to call any method of one project in other project. Please advise how to recsolve this problem.
Thankyou in advance.
Rahul

If you already have a case open, it's polite if you mention that - so I don't have to answer the same questions to support and also to this forum. Likewise, when you get an answer to your question on this forum, you can tell support. So they don't keep looking for something you already have the answer to. Cuts down on the duplication of effort.
You have one project. You add more files to it (regardless of how you add them - by creating files with the editor, by using a wizard or by importing files from another project), you still have only one project.
If you had some other project that you exported the files from - that project is still there - but the original project does not know or care about it.
Edited by: mikereiche on Jun 21, 2010 1:55 PM

How to use one forms fields, program units in another form.

The whole proceessing and update is happening in one main form.
Main form has all the fields and a reprocess button which re-creates records if they have error. Record name is the primary key.
I have another small form, which just shows the list of record names in the system. I want a reprocess button next to each record name so that user will be able to just select any record name and press reprocess button to recreate any record data.
There are a lot of fields in main form and program units , which are used by the reprocess button.
Any suggestions like how to go for it?

You can either pass all the relevant data from the Small Form to the Larger form and make it reprocess the data or you can move the Program Units to a PL/SQL Library (.pll) and attach the library to your smaller form where you can call the program units. Either option requires changes to the Larger form to enable it to process a record passed to the form as a parameter or to externalize the Forms Program Units to a library.
Personaly, I would recommend you move the Program Units to a Library. This would enable you to use the processes in any form (that has the library attached).
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

How can we use Bounded Taskflow in another project.

Greetings!
Suppose we have 2 projects: projectA and projectB.
In projectB we have 4 bounded taskflows: T1, T2, T3, T4.
In projectA we have a view with a dynamic region, text input for digits and a command button.
How can we fill our dynamic region with taskflows from projectB, by typing a number of it and pressing a button.
Thank you.

Hi,
Yes, I know.
However, I'm under the impression that this is not the preferred method. All the documentation describe the ADF library method and I cannot find any description about putting them in a separate project.
All said, it seems to kind of work, using the 'jar dependencies', except for taskflows with a nested taskflow from another project. An I still need to import them as adf library.
We'd like to develop our taskflows separately using a short development lifecycle. Putting each of them in a separate application and publish and import them in the main application seems to be too complicated and takes to much time, everytime.
Am I correct that the shortest development lifecycle is to have all the taskflows in our webapplication, and have full debug and hot-swap functionality?
Ciao
Aino

How did I replace all footage from one imovie project with another

I have three projects in my project library A, B and C. While editing B I somehow accidentally copied all my clips from project B into project A, erased all project A footage while the title remained the same. I want my project A footage back and can't find it. Time machine wasn't set up at the time (I thought it was automatically already going from the day I purchased it). Undo functions only go back once. Three people at Apple have no answer, saying that you can't transfer contents from one project library piece to another while still in the project library part of the screen. I'm sick if it's lost because it took forever to edit, but I want to figure out what I did so I don't accidentally do it again. If I didn't transfer from project to project, how did a copy of B get into my A file and erase its contents?
Project A seems gone, as the orange lines in the event library clips indicating which parts have been used are also gone.

Choose Go to Folder from the Finder's Go menu, provide /Users/ as the path, drag one account's home folder to the other's desktop, and move the items inside it to the desired locations.
(109743)

Is it possible to uninstall Adobe Premiere Elements 13 from one computer and put it on another PC, using the same serial number?

I had installed Adobe Premiere Elements 13 on my laptop, which is slow. Is it possible to completely remove the program from my laptop, and reinstall it on another PC, using the SAME installation disc?

Tomquer
If all you have is the Premiere Elements 13 purchased activated serial number on one Windows computer, you can go ahead and do nothing else but install the program from the disc on the second Windows computer with the same purchased serial number.
That will leave you with the purchased activated serial number on two of your computers.
Adobe allows you the same purchased activated serial number on no more than 2 of your computers. So, nothing to do but to use one at a time.
Lots of scenarios beyond.
1. Deactivate Premiere Elements 13 from computer 1. Do not bother to uninstall. Deactivation is not the same as uninstall.
To deactivate, in an opened Premiere Elements 13 project, go to Help Menu/Sign Out. Close out of there.
Then do nothing, leave the program in the deactivated/installed state.
2. Deactivate and Uninstall Premiere Elements 13 from computer 1.
Any questions or need clarification, please let us know.
Thanks.
ATR

I am trying to drag and drop one page of a .pdf into another .pdf in Acrobat Reader. I used to be able to drag and drop from one .pdf to another.

I am trying to drag and drop one page of a .pdf into another .pdf in Acrobat Reader. I used to be able to drag and drop from one .pdf to another.

If you could drag and drop pages before, it wasn't in Reader. You no doubt had Adobe Acrobat (Pro or Standard) which shouldn't be confused with Adobe Acrobat Reader. They recently added Acrobat to the name of Adobe Reader so the confusion about which product you had and/or have is understandable.

How to use one DC's view/component/appln in another DC

Hi All,
I am new to DC concept. I am trying to use one DC's component in another DC. I have done following steps.
a)Created two DCs A and B
b) DC A's 'New Public Part-->Entity Type(Web Dynnpro Component) I selected component
c) Add Used DC in B, I added A's component
 From this point onwards I am not getting any clues. How do I call A's component in DC B. Please guide. Any examples will be great.
Thanks and Regards,
Ganga.

Hi Gangadharaya,
Just tell me do u want to display a view, use some context or use some methods defined in other controller.
So that i can help you in the same direction.
Component Usage
Suppose you have following scenario:
1) DC2 has component Comp2. In this dc you read the context a value and stores it in context named "Ctx_value".
2) DC1 has component Comp1. Here you want to read the Ctx_value from comp2.
In Comp2 create a method getValue()
public java.lang.String getProcessId( )
 return wdContext.getCurrentElement().getAttributeValue("Ctx_value");
In the interface controller of Comp2 click on properties tab and add reference to the cont2 controller. Now create a method here in interface controller to get the value of Ctx_value
public java.lang.String getValue( )
 return wdThis.wdGetComp2Controller().getValue();
Expose the Comp2 as public part now.
In DC1 add DC1 as used DC.
Build both dc's
In Comp1 create Component usage by name Comp2Usage to Comp2.
Now you can access the method getValue() from interface controller of Comp2.
wdThis.wdGetComp2UsageInterface().getValue();
This is how you can access a value of Context. Same can be done by direct binding.
View Access
If you want to access a view v2 in comp2 then goto windows in comp1 and embedd an existing view and in that select the interface view of comp2. The default view in comp2 can now be displayed in comp1.
Regards,
Murtuza
Message was edited by:
 Murtuza Kharodawala

I have an extensive aperture library on my computer's hard drive and I want to break it up into separate smaller libraries on external hard drives. How do I take projects from one library and add them to another one?

I have an extensive aperture library on my computer's hard drive and I want to break it up into separate smaller libraries on external hard drives. How do I take projects from one library and add them to another one?

Coastal,
Frank gave you the exact answer to your question.
However, I would like to ask if you are indeed asking the right question. Do you really want different libraries? The implications are that you have to "switch" libraries to see what's in the others, and so that your searches don't work across all of your pictures? If so, then you asked the right question. If not, you may be more interested in relocating your masters to multiple hard drives so your library gets smaller, instead of breaking up the library.
nathan

Can i use one router connected to my cable modem and another....

can i use one router to connect to my cable modem them have another (not connected to a modem) and a wireless reciver so i can plug my xbox 360 into it?

Yes you can do that ... but you need to configure the computer connect to the Router using Cable ....
Afterwards ... you can work on mutiple computers ...

How to use one query results in another query

hi,
in help.sap I have founded that using variable type replacement path I can use one query results in another query. It is wrote there that I have to choose query name results I want to get in variable definition but I do not know where.
How I can do this?
Result I want to get is:
In one query I have material prices in another material quantities. I want to calculate inventory value (price * quantity). Moreover prices are on plant level, quantities on storage type level. Plant is atribute of storage type.
Can I do this?
Regards,
Andrzej

Hi Andrzej,
please check out this thread: Set parameters values depending on other parameters
I had a discussion about query results as input for another query in there.
For creating a workbook, just click on the save button after you ran your query in the bex.
Siggi
Message was edited by: Siegfried Szameitat

How to use one module pool program in another module pool programming?

Hi
I have one moodule pool program.
In one of my screen i want to use some code which already developed in another module pool program.
Is there any direct way for using one module pool programcode in another module pool program.
If there any approaches for this plz help me in this issue.

Dear,
If you want to use the code.
first you can write your code in a subroutine in module pool program 1
and then you can use it from module pool program 2 by
perform subroutine_name(program_name)
using P_1
changing C_1
if you wan to use one module pool data into other module pool.
so that is another requirement.

How to use one variable as a default value for another variable?

Hi Experts,
Is it possible to use one variable as a default value for another variable?
For example:
Variable 1 = current calendar year month
Variable 2 = mandatory input ready variable for calendar year month
I want to use variable 1 as default value for variable 2, but also have the ability to change the month if required.
Thanks!
Kathryn

u can use replacement path variable
in that case u can replace the values of 1 variable with the another variable...
but u cannot do this setting
u cannot make variable 2 as mandatory
u cannot enter value for variable 2
because by default it will take the value of variable 1
u have to make follow settings
variable 2
name , technical name
processing by = replacement path
infoobject = ocalmonth
next tab
replaced by another variable
variable name
offset start , offset lenght
save and hit okey

How to use one report column into the another report in obiee

How to use one report column into the another report in obiee

i dont want to use column as a filter for another report it should be report column for another report
Thanks,
Vivek

Using one Viewcontroller project's taskflow in another Viewcontroller

Similar Messages

Maybe you are looking for