Using PartitionedSender to send an event to an EventHub got exception.

var manager = NamespaceManager.CreateFromConnectionString(xxx);
var eventHubSender = eventHubClient.CreatePartitionedSender(description.PartitionIds[0]);
eventHubSender.Send(new EventData("Hello") {PartitionKey=eventHubSender.PartitionId);
result in
$exception {"The specified partition key '0' is invalid for partition '0'. Do not set a value for partition key or send using EventHubClient.Send."}
System.Exception {System.ArgumentException}
What is wrong?

Great, I think the error message needs improvement to be crystal clear. It should say: "The specified partition key '0' is invalid for partition '0'. Do not set a value for partition key when sending with a PartitionedSender. Otherwise
use EventHubClient.Send"
I will change to that.

Similar Messages

Send out email when BAM backend got exception

As title
is there any way to do it?

This is not built into BAM. You could look at Oracle Enterprise Manager logviewer and OEM integration with email. Alternatively, use a tool that monitors log files and send email when it detects "failures" in the logs.

Send an event from Java Web Service to BPEL

Hi,
I have a requirement where from an Async BPEL service I have to call a Java Web Service. After the completion of its task Java Web Service will fire an event that has to be consumed by the BPEL to initiate further process. Can anybody help me with how to send an event from Java Web Service and at the same time consume it in BPEL?
Thanks,
Anuj

See the following posts for your answer
http://blogs.oracle.com/soabpm/entry/event_delivery_network_chapter
http://blogs.oracle.com/soabpm/entry/using_the_event_api_to_publish
http://guidoschmutz.wordpress.com/2010/01/12/using-the-event-api-to-publish-an-event-to-the-event-delivery-network-edn-the-spring-way/

HOW DO YOU SEND AN EVENT "OUT" TO A COMPONENT?

I am writing an AIR app that has many components. The main application has a "start" button to begin a new project, and when you exit a project, the application returns to the start page. Even though you exit back to the start page, the major MXML components used in the application do not get destroyed because there is no way to destroy them so they just sit there idle in the background and not visible in the "start" state. The problem is that when a user clicks the "start" button again to start a new project, the MXML components appear in the new project in the old state that they were in because there is no obvious way to reinitialize them. If there was a way to destroy the components, then when they were recreated in a new project I could initialize them with a creationComplete handler. But since you can't literally destroy an MXML component, I need a way for the components to be able to listen to the main program for a click event on the "start" button, and then each component initializes itself when it hears the event. So instead of components passing an event up to the main application, I need the main application to send an event down to the components. Is there a way to send an event from the main application out to the various components? (or is there a way to destroy an MXML component so that you can recreate it later that I am unaware of?)

Yes, that will do the job, though it's better to use a custom event and you don't need a property.
I quickly made a tiny example in Flash using a static variable as a central dispatch hub..
Create a class:
package {
    import flash.events.EventDispatcher;
    public class EventHub extends EventDispatcher {
        public static var dispatcher:EventHub = new EventHub();
        public function EventHub() {
            // constructor code
// in the component add this
EventHub.dispatcher.addEventListener("INIT_COMPONENT", _onInitComponent);
// the handler for the event inside your component
private function _onInitComponent(e:Event):void{
    trace("INIT_COMPONENT received");
// wherever you need to trigger init, add this
EventHub.dispatcher.dispatchEvent(new Event("INIT_COMPONENT"));
Paul

[solved] send keyboard event / key to specific background window?

Hi!
So... is this possible / how? I'd like to send keyboard events to a window in the background - maybe even in regular intervals. While I'm dong something else, in another window (or nothing).
Thx!
Last edited by whoops (2011-07-21 11:05:44)

Actually I'm thinking, maybe there is a totally another (better?) way to do what you want. I usually find that automatizing tasks in linux differs very much from the windows experinece, most of the times scripting is the most powerful and easy way of doing things. So if you describe to us what you want to accomplish, maybe some experienced linux gurus would give you some advices that sets you off course from sending keys and mouse events. I used to do that in windows with autohotkey, but now in linux there was no need for that so far ever, except for using system wide abbreviations with autokey.

How to send an event to external system?

Hi
I am facing problem in sending the event to an external system.
Initially I created 2 workflows with different itemtypes. One has send event and other has receive event. This works perfectly when I use the WF_OUT and WF_IN agents of the same system.
Now, I signup two workflow server ( running in two PC, on Oracle 8.1.7 ). I have followed the following steps.
a. creating database links.
b. Signing up the system.
c. changing the system status to enabled in Global Preference Page.
In the event subcription in System1 is local, Out agent is Wf_OUT of System1 and the TO Agent is Wf_IN of System2. There is external subscription for the same event in System2 without Agents.
When I run the workflow with send event, the event message goes to WF_OUT agent with the status Ready, but never propogates.
What could be the reason? Can anyone help me?
Thanks a lot.

Hi
Thanks for immediate respose. I tried the ping/acknowledgement example in the biginning itself. It doesn't work. I also tried by changing the agents ( to respective values suitable for my systems) of that example. Then also it failed. The error in that case also same. The message will not propogate from the out going agent.

Sending an Event to Result Set iView

Hi,
in the standard MDM Result Set iView, there is a provision to generate an EPCF/URL Event. But is there a way to send an event into this standard result set iView?
I want to create a custom filter in web dynpro and filter the Result Set iView.
Please let me know if you know of a provision to do this.
Regards,
Nitin

Thanks, issue was solved.
Ivan,
I am using the following code:
For Item Details
                WDPortalEventing.fire(
     "urn:com.sap.pct.mdm.appl.masteriviews",
     "selectRecord",
     "MDMSystemAlias=SAP_MDM_Repository_Customers&MDMTableName=CUSTOMERS&mdmId="
     + rec.getId() //RecordId.
     + "&RefreshSearch=true");
For resultset
               WDPortalEventing.fire(
     "urn:com.sap.pct.mdm.appl.masteriviews",
     "getRecordByIds",
     "MDMSystemAlias=SAP_MDM_Repository_Customers&MDMTableName=CUSTOMERS"
     + "&id="
     + rec.getId()) ; //recordId

HELP. Using iCal to send timed emails - I used to be able to do this...

Ok - there's a chance I've gone completly mad - or I just dreamt this - but: Once upon a time I used iCal to send timed emails (with Mail) to outside addresses without the emails looking like they came from iCal.
I did this for things like 'calling' in sick to work (therefor looking like I was up at 8:15 being ill, instead of sleeping comfortably in hung over splendor) or sending out parts of work throughout the workday (instead of when I'd actually completed them at three in the morning).
This was very useful.
I just can't now figure out how I did this.
Has one of the iCal updates removed this function? Is there something obvious I've forgotten?
I seem to remember using iCal to trigger a file that in turn sent the email - but again I can't trust my memory.
Anyone have any hints or ideas? I'm driving my self mad on this one.

Neal,
I am in the same predicament. I would essentially like to accomplish the same deal, as seen below. . . (from another forum that went unanswered.)
I use iCal (1.5.5/ 2.0.3) currently but own Entourage (11.2.1) as well. I have clients that I service on a weekly or biweekly basis whose appointments are in my iCal; I call and remind them the day before. The majority of these people are great about checking email. I would like to set up an automated email reminder which is sent to them for each appointment, two days in advance that does not contain an .ics file. Many times my clients' email app has junked the message due to the small attachment. Others don't want to open a file when they don't know what it is.
Predetermined timed stamped/Automated iCal events are possible aren't they?! If not, do I have to move over to :dreaded Entourage?

Sending an event from an external window

Hello everybody,
Does anybody knows how to send an event from an external window back to the iView that opened it?
thanks, Adi.

hi adi,
try this,create a action and event handler method in
component controller(cc).Call the method of the component controller from the method(onactionclick) in the external window and pass the parameter.
wdThis.wdGetcomponentController).eventmethodinccparameter);

Create a event handler method in main view and set the event source and subscribed event(cc method name) in
method tab.
Fire this method from cc
wdThis.wdFireEventnameinmainview(parameter);
And finally handle the parameter in a definedmethod of the view(that called external window )
u can also use contextmapping between component controller and bothview ( external window view and main view)
regards,
arun

Sending ical event to coworker

Every time I send an event no information goes with it? What am I missing?

After getting no answers to this, I decided to open a real problem, so I went to Support.Apple.com and within a few short clicks, Apple called me.
I accidentally hung up on them, and they called back in 2 minutes.
I then waited in the queue for a few short minutes. The person who answered, understood my problem and transferred me to the iCal department where I waited another 15 minutes.
The iCal department then did some research for 10 minutes, and came back to tell me that, unfortunately, iCal is working / not broken. I disagreed, saying that this is my business computer and not being able to send meeting invites to anyone not using a MAC is insane.
The support guy suggested I tell the developers directly, via http://www.apple.com/feedback/ical.html.
I did.
He suggested that you all do to. The more people who feedback, the faster we'll get a fix!

Using wildcards (*) in sender file adapter - FTP type

Hi guys!
Dooes it work using wildcards in sender file adapter (FTP type(!) (filesystem obviously work))? I tried it and it failed. it works only for exact name..
I read some articles about FTP and the result is, that ftp work always only with 1 file, so I'm wondering, if this is possible.
Thanks for info!
Olian

Thanks for all replies..
I know of course, that * can be used, I use it in many scenarios too. But on a FileSystem. It is not working if the sender type is FTP.
*, ., *.dat, ... nothing like that works.. Just exact file name.
I am able to pick up file, if I specify it's exact name, so there should be no problem with permissions..
Please, I'd appreciate one reply with comfirmation: yes, we are using asterisk (*) , we access source files via FTP and they are processed.
Is there anybody with this experience, that it works?
Thank you!
Olian

HT3529 My friend switched his phone number from an iPhone to a Blackberry. My phone still wants to use iMessage to send him a text and won't let me send it as a text unless I turn off iMessage on my phone. Is there a fix for this?

My friend switched his phone number from an iPhone to a Blackberry. My phone still wants to use iMessage to send him a text and won't let me send it as a text unless I turn off iMessage on my phone. Is there a fix for this?

jengrz wrote:
My friend switched his phone number from an iPhone to a Blackberry. My phone still wants to use iMessage to send him a text and won't let me send it as a text unless I turn off iMessage on my phone. Is there a fix for this?
TechCrunch posted a solution today that applies to this problem, I think.
Go to: https://supportprofile.apple.com/MySupportProfile.do
Click your old iPhone and "unregister" it.
More info here:
http://m.techcrunch.com/2012/01/05/i...d=tc_home_art&

I updated to yosemite and now if someone is using imessage and sends a text message to my phone it doesn't show up on my phone but does on my computer. I don't want messages on my computer! How do I get this to go away and work like it used to?

I updated to yosemite and now if someone is using imessage and sends a text message to my phone it doesn't show up on my phone but does on my computer. I don't want messages on my computer! How do I get this to go away and work like it used to?

Follow the instructions under the heading "How to unlink a phone number" on this page.

Need to use only one sender and receiver communication channel.

Hello Experts.
I have a scenario where in I have to use only one sender and receiver communication channel to push files from different source directories to different receiver directories.
For Eg;
Sender
D://dir1/file1 --->                  E://dir1/File1
F://dir2/file2 ---->                 G://dir2/file2
H://dir3/file3----->                 I://dir3/file3.
Can this be achieved by using pass through scenario?
Please let me know if the requirement is not clear.
Thanks in advance.
Advit Ramesh

Hi Advit,
I think it is possible. You have to use the Advanced Selection for Source file in the sender channel to define multiple files to be picked up. Also, the Dynamic configuration must also be enabled and used in the mapping so you can manipulate the target directory and target file name based on your source files.
For Polling from multiple directories:
http://wiki.scn.sap.com/wiki/display/XI/File+Sender+Adapter+-+Polling+Multiple+Directories
Dynamic Configuration:
Dynamic file name and directory in Receiver File Adapter - summary of possibilities - Process Integration - SCN Wiki

TS2755 Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help of how to set up messages on each

Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help on how to set up messages on each device separately and to start using messages app on each device independently. Thanks

search google for "iphone remove picture from contact"

Using PartitionedSender to send an event to an EventHub got exception.

Similar Messages

Maybe you are looking for