HTTPS on Receiver Http Adapter

Hi ,
In the http receiver adapter , if i'm using 'https' communication where do i specify that . Is it in the RFC destination of type 'G' . I also read in some places that i would have to do that in the Receiver Agreement . But i think the security options in the Receiver Agreement are meant for adapters - XI, SOAP, Mail, or CIDX and i couldn't find anything for http.
Is there any need to specifiy it in the adapter . And in the RFC destination we would be giving the host name , port and the path prefix string . Do i have to activate the SSL option there, is that all thats needed to make sure that the receiver http adapter sends the message out via http.
PS. I've already enabled the SSL on my server in the abap stack .
Thanks & Regards,
Rahul

Hi Rahul,
Yes, you need to make the SSL option in the G type connection active, if authentication is via certific you can select there itself.
Thanks,
Srini

Similar Messages

HTTPS in Receiver HTTP adapter

Hi ALL,
I have a HTTP receiver scenarion..i.e The interface is XML over HTTPS..
Can we do HTTPS in receiver HTTP adapter ..how to do the SSL for this in Receiver HTTP channel because when i check the receiver HTTP adapter ..i don't find any setting for HTTPS on tht ..
Thanks
Souz

prateek ,
thanks for the reply ...
You mean to say ..i have to select addressing type "HTTP Destination" and in the HTTP destination input files mention the RFC destination of type G..?
Provide the SSL details there u2026 where can I provide this.. ?
thanks
Souz

OES-000149: Only allowing https connections, received http

Hi,
I am trying to install provisioning service for my Endeca system.
I have installed all three servers (Endeca server, integrator and Studio) in development mode and I have not used SSL in any of them.
Now when I am trying to install provisioning service I am not able to connect to the endeca server, the error being:
####<Oct 29, 2014 12:45:50 PM IST> <Error> <com.oracle.endeca.pdi.logging.ProvisioningLogger> <infva05628> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <b07a8e9881d7066d:40aa6725:1495ac057b0:-8000-0000000000000014> <1414566950356> <BEA-000000> <javax.xml.ws.WebServiceException: Failed to access the WSDL at: http://localhost:9001/endeca-server/ws/manage?wsdl. It failed with:
Response: '404: Not Found' for url: 'http://localhost:9001/endeca-server/ws/manage?wsdl'.
com.oracle.endeca.pdi.mdex.clustermanage.ClusterManageClientException: javax.xml.ws.WebServiceException: Failed to access the WSDL at: http://localhost:9001/endeca-server/ws/manage?wsdl. It failed with:
Response: '404: Not Found' for url: 'http://localhost:9001/endeca-server/ws/manage?wsdl'.
When I tried to access the url "http://localhost:9001/endeca-server/ws/manage?wsdl" I got the following message:
OES-000149: Only allowing https connections, received http
How do I solve this issue and install provisioning service?

Hi brett,
Thanks for the help. I realised I installed Endeca Server 7.6 in secure mode (default option checked) during installation.
My error has been solved thanks to you.
Thanks.

Convert XML payload to HTML form data in Receiver HTTP Adapter

Hi,
I want to make a HTTP request ( Receiver HTTP Adapter ) to a servlet where I need to send the payload in HTML form format ( name=value ). As per the help document:
A typical HTML form comprises named fields. When transferring a completed form to the server or a CGI program, the data must be transferred in such a way that the CGI script can recognize the fields that make up the form, and which data was entered in which field.
The plain HTTP adapter constructs this format using a prolog and an epilog
Has anyone done this before? I looked through all help documents and forums but in vain. I can resort to Java Mapping to do this but I do not want to re-invent the wheel if I can do it easily using HTTP Adapter Configuration. Please help.

The parameters available in HTTP adapter for message header are:
HeaderFieldFive     http://sap.com/xi/XI/System/HTTP
HeaderFieldFour     http://sap.com/xi/XI/System/HTTP
HeaderFieldOne     http://sap.com/xi/XI/System/HTTP
HeaderFieldSix     http://sap.com/xi/XI/System/HTTP
HeaderFieldThree     http://sap.com/xi/XI/System/HTTP
HeaderFieldTwo     http://sap.com/xi/XI/System/HTTP
HTTPDest     http://sap.com/xi/XI/System/HTTP
TargetURL     http://sap.com/xi/XI/System/HTTP
URLParamFive     http://sap.com/xi/XI/System/HTTP
URLParamFour     http://sap.com/xi/XI/System/HTTP
URLParamOne     http://sap.com/xi/XI/System/HTTP
URLParamSix     http://sap.com/xi/XI/System/HTTP
URLParamThree     http://sap.com/xi/XI/System/HTTP
URLParamTwo     http://sap.com/xi/XI/System/HTTP

How to send the payload to a jsp using receiver Http adapter?

Hi experts,
I have this scenario from Legacy to XI to external app server.I have a test jsp to execute that functionality .Its a jsp which has 1 textarea named "test" and when I click on the submit buton I get a response back.This way I am able to test this independently.Now from XI when I am executing my scenario I am getting status code '1250' and message as ' http request(test) is null'.Now in the scenario in http adapter I just provide the target host : ip of server ,
service number : port no ,
path: the container or the request handler. But this scenario fails and gives me the above erroneous response.Now Basically I am not able to get how to send the value to the textarea "test"? please provide help as soon as possible.Do we have to put the name of the jsp in the "path" in http adapter and use prolog as test=.I tried this but it doesnt work.
Is there any way to check the URL that it forms after appending the querystring in the url ...?
So please provide help on this or suggest a solution to [email protected] as soon as possible.....
Thanx in advance.
Akshata

hey Shekhar,
thanx for that prompt reply but I have configured the communication channel in the same manner as suggested by u.
actually I have this jsp page http://xx.xx.xx.xx:8080/abcdef/try/efg.jsp where there is a textarea "test" which has to be filled and there is a submit button.When I test this http client i.e the above jsp page independently then it goes to handler
http://xx.xx.xx.xx:8080/abcdef/trial/ And it gives a proper response message after clicking on the submit button.
now I want to carry out the same using receiver http adapter. I need to pass the value for this inputfield names "test" on that jsp . so right now I have configyured the adapter as
addressing type: url
target host : xx.xx.xx.xx
service no:8080
path : here I have given the path of handler i.e /abcdef/trial I tried giving the jsp page also but logically I guess it should be the handler.
content type: text/xml; charset=iso-8859-1
xml code: UTF-8
Mask special characters (URL escaping) checked.
now since the name of the inputfield is "test" in the prolog I gave test=
But it doesnt work I get this error "http request parameter [test] is null" in the response message which I guess suggests that it is not able to send the value for the field"test" to that handler.Please suggest how to send this and tell me if there are any other configurations that I have to do in the receiver communication channel.
Thanx ,
Akshata

PI 7.1 receiver SOAP adapter using https

Hi all,
In PI 7.1 receiver SOAP adapter using https, what are the configurations necessary in PI box?
Certification, and key store values, security etc etc
-Michael.

>
Michael Johnson wrote:
> I did n't find anything related to 7.1 version
Some leads are provided by help: http://help.sap.com/saphelp_nwpi71/helpdata/EN/56/992d4142badb2be10000000a1550b0/frameset.htm
Regards,
Abhishek.

How to configure HTTPS in the receiver HTTP adapter ?

Hi Guys,
How to configure HTTPS in the HTTP receiver adapter and where i need to mention the QOS=BE in the receiver adpter.
any suggestions or help would be appreciated
Thanks,
Srini

You would need make sure that SSL is enabled on the ABAP stack . I rememver seeing a blog on SDN that shows how this is to be done.
Once you have SSL enabled in the ABAP stack ( you would also need to install the cryptographic libraries as a part of this exercise) , you would be able to use HTTPS and also provide the necessary digital certificates etc.
I have tried this with SOAP adapters etc but havent with the HTTP adapter but I dont see why this should be any different.
Regards,
Bhavesh

How to configure message header in receiver http adapter?

Hi all
I need the outgoing message payload from receiver http adapter to backend system with below form.
POST http://222.222.33.22 /HTTP1.0
content-type:application/x-www-form-urlencoded
USERID=xxxxxx&PASSWORD=xxxx&SRCID=10&CDDATE=20070601...........................................................................
×POST http://222.222.33.22 /HTTP1.0
○content-type:application/x-www-form-urlencoded
○USERID=xxxxxx&PASSWORD=xxxx&SRCID=10&CDDATE=20070601...........................................................................
Is there a parameter to enable POST method as a part of message header outputing?
thanks in advance.

The parameters available in HTTP adapter for message header are:
HeaderFieldFive     http://sap.com/xi/XI/System/HTTP
HeaderFieldFour     http://sap.com/xi/XI/System/HTTP
HeaderFieldOne     http://sap.com/xi/XI/System/HTTP
HeaderFieldSix     http://sap.com/xi/XI/System/HTTP
HeaderFieldThree     http://sap.com/xi/XI/System/HTTP
HeaderFieldTwo     http://sap.com/xi/XI/System/HTTP
HTTPDest     http://sap.com/xi/XI/System/HTTP
TargetURL     http://sap.com/xi/XI/System/HTTP
URLParamFive     http://sap.com/xi/XI/System/HTTP
URLParamFour     http://sap.com/xi/XI/System/HTTP
URLParamOne     http://sap.com/xi/XI/System/HTTP
URLParamSix     http://sap.com/xi/XI/System/HTTP
URLParamThree     http://sap.com/xi/XI/System/HTTP
URLParamTwo     http://sap.com/xi/XI/System/HTTP

Using Receiver HTTP Adapter ?

Hi,
Is it possible to call the Mail service using receiver HTTP Adapter?
Appreciate your help...
Thanks,
kumar.

Hi,
If we are using the multi mapping, Is it possible to call Mail service using SOAP receiver adapter & IDOC has sent parallely..
Correct me if i'm wrong...
Thanks,
vasanth.

HTTPS communication using HTTP receiver adapter URL address as Address Type

Hi All,
If some one who has tried HTTPS communication using HTTP receiver adapter using URL address as Address type can you please guide me what are the steps need to be done.
Note : Address type is a parameter in HTTP adapter setup .
Regards,
Reddy

Hi,
Check this,
Configurations in Integration Directory
The plain HTTP adapter gives the receiver system the following specifications:
 Specifications for addressing using a URL address:
Target host, service number, and path prefix including query string:
http://<hostname:port>/<path>?<query-string>
You can identify the target host (HTTP port) of a SAP Web Application Server using
the
ICM monitor
Host and port of the HTTP proxy (optional if there is a firewall between the plain
HTTP adapter and the receiver system)
Authentication data for the receiver system.
See also: transaction Display and Maintain RFC Destinations (SM59).
 Specifications for addressing using an HTTP destination:
HTTP destination
 Parameters from the communication channel for technical routing
Content type (the entry text/XML is expected as default)
Specifies the format that the message contents (the payload) should have.
Optional header fields for the receiver-specific protocol
Attributes for the query string
1. Sender party
2. Sender service
3. Receiver Interface
4. Message ID
5. Quality of service
6. Queue ID
All attributes are selected except for the queue ID. If you do not want a value to be
transferred to the receiver, deselect it. The queue ID is only required if the quality of
service is EOIO.
Specifications for payload manipulation
XML code (default UFT-8)
Specifies the character set.
URL escaping
Presents the XML in a URL-enabled format. Special characters that could be
interpreted as control characters are replaced with escape characters (masked).
Prolog
Enhances the payload for particular servers (optional, see below).
Epilog
Enhances the payload for particular servers (optional, see below).
Enhancing the Payload
Regards
Seshagiri

Receiver SOAP Adapter (HTTP AXIS)

Hi Experts,
I need to use receiver soap adapter to communicate with a WebService, actually it is a AXIS service i can see when i give the soap url in web browser.
my question is for axis service, does it mean i have to use HTTP AXIS in the receiver channel to request the response for web service server? Can i use HTTP only without AXIS?
when i use SoapUI to test the webservice, it works fine. But when i use receiver soap adapter with HTTP (without AXIS), it is responding with the belwo error.
<sap:Error ...>
<sap:Category>Application</sap:Category>
<sap:Code area="UNKNOWN">APPLICATION_ERROR</sap:Code>
<sap:AdditionalText>Application Fault</sap:AdditionalText>
<sap:ApplicationFaultMessage namespace="http://sap.com/xi/XI/System/Axis/sample">host name</sap:ApplicationFaultMessage>
<sap:Stack/>
</sap:Error>
Experts, please help on this, the major question is HTTP AXIS is required when target web service is an AXIS service?
Thanks in advance.
Regards,

>>my question is for axis service, does it mean i have to use HTTP AXIS in the receiver channel to request the response for web service server? Can i use HTTP only without AXIS?
You are going to consume webservice. You can use standard SOAP adapter itself to consume the webservice that is built with axis framework.
Do you have some specific user authentication procedures like SAP Assertion Tickets, username token etc and some specific encapsulation formats (MIME, DIME, MTOM),WS Reliable Messaging and so then you need SOAP Axis adapter. If you need to consume webservice with standard transport protocol (HTTP or HTTPS) and client authentication etc , our standard SOAP adapter is more than enough.
Refer this link what axis soap adapter supports

How to config receiver http adapter for HTTP POST without XML tags ??

Hi All,
Can you please provide some infornation on How to config receiver http adapter for HTTP POST (Request) without XML tags ?? Our receiving product doesn't support XML formats.
Is there any option to bypass server authentication on the XI?
If anybody has the same experience or know how to please provide inputs.
Thanx
Navin

Hi,
you can use xsl mapping for this in which u xtract
the contents only but not the xml tag.
Ranjit

Receiver XI Adapter: HTTP Port

Hi All,
Receiver XI Adapter:
I have access to this system thru SAP GUI.
Where can the below details be found?
1. Target Host: Specify the host name of the receiver system.
2. Service Number: Specify the HTTP port.
3. Path prefix?
Kindly help.
Thanks,
Karthik

Hi,
The values will be:
U need to give the R3 system name.
path prefix will be:
/sap/xi/engine?type=entry
refer the below link:
http://help.sap.com/saphelp_nw04s/helpdata/en/85/78af1bf407434796aaf8dbd6d4e7b7/frameset.htm
You set up the HTTP destination in the SAP system by using transaction SM59. Use the following path prefixes in the Target System Settings.
/sap/xi/engine?type=entry
for SAP systems based on SAP BASIS 6.40 (XI 3.0 message protocol).
/sap/xi/engine?type=receiver
for SAP systems based on SAP BASIS 6.20 (XI 2.0 message protocol).
chirag

Received HTTP response code 500 : Internal Server Error

Hi All,
In my scenario EANCOM to IDOC, I am getting an error in the sender communication channel (FILE Adapter). It is being picked up from the sender directory successfully but not reaching the XI box (no messages seen in SXMB_MONI).
The error in the runtime Workbench says the following:
Transmitting the message to endpoint http://gdrsap.nestle.com:50000/XIAxisAdapter/MessageServlet? using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 500 : Internal Server Error.
Regards,
Manohar

Hi Murli
error code 500 stands for Internal Server Error
This code is the default for an error condition when none of the other 5xx codes apply.
for more details on error code follow the link
http://www.web-cache.com/Writings/http-status-codes.html
you have to restart J2EE engine
steps to restart J2EE engine
1) run transaction SMICM
2) then in the tab administration => J2EE instance(local) =>send soft shutdown with restart
by this java engine will restart and will be up in 5-10 minutes and your problem will be solved
Thanks
sandeep sharma
PS ; if helpful kindly reward points

Received HTTP response code 500..

Hi All
Whenever i try a scenario with file adapter as the sender, i get the following error in the runtime workbench (message monitoring).
"Transmitting the message to endpoint http://USSAPVM7:8000/sap/xi/engine/entry?action=execute using connection AFW failed, due to: Received HTTP response code 500.."
Can anyone let me know as to what could be the cause of the problem. Please remember the response code is 500 and not 503.
regards
Sameer

Hi Sudhir/Siva
My pipeline url has the following entry,
http://<hostname>:8000/sap/xi/engine/entry?action=execute
so u recommend that i should change it to,
http://<hostname>:8000/sap/xi/engine/entry?action=entry
(or)
http://<hostname>:8000/sap/xi/engine/entry?type=entry
(or)
http://<hostname>:8000/sap/xi/engine?type=entry
which one of the above three should i change to. But whenever i try other scenarios such as idoc to file, it works fine. So by changing the pipeline url, will there be any problem while executing the the other scenarios.
cheers
Sameer
Message was edited by: Sammy

HTTPS on Receiver Http Adapter

Similar Messages

Maybe you are looking for