Using Roland and/or Akai with Soundtrack

I have a rather large collection of Roland & Akai Sampler disks. These contain a lot of Pads and such that I would like to use with Soundtrack. The problem is that these loops contain an attack, loop point 1 & loop point 2. The sample plays and then loops from point 2 back to point 1 from within the sampler.
Is there any way to setup ST to recognize the loop points ?
I have a converter that will convert the Roland and Akai samples to a number of formats.
Thanks
Tim

Hi nich.lee,
You can't chart Duration formatted data without first converting it to another format. Also, you will get an error if you attempt to use the AVERAGE function on an empty range.
Here's an example of charting Duration data by using a conversion...
Best regards,
Jerry

Similar Messages

MacBook will not start. I have restarted with original CD. I have used Utilities and "no problem" with hard drive. I have reset PRAM. I have tried safe boot. Nothing is work. Gray screen with Apple logo and rotating wheel. Thanks for any suggestions!

MacBook will not start. I have restarted with original CD. I have used Utilities and "no problem" with hard drive. I have reset PRAM. I have tried safe boot. Nothing is work. Gray screen with Apple logo and rotating wheel. Thanks for any suggestions!

Snow Leopard is a Mac OS X version. You say that it's the version you have in your Mac (10.6.8). Do a back up of your files, format the hard drive (using Disk Utility) and reinstall again

Using ExtensibleEnvironment and Command Pattern with 3.7.1 Release

I am trying to port my project 3.6 project to 3.7.1. I am using the Extensible environment from the jar coherence-3.6-common-1.7.3.20019.jar
While starting the cluster I am getting the below errors.
Is there a confguration showing how to configure the Command Pattern and Extensible environment with XSD validation in 3.7.1?
Exception in thread "main" (Wrapped: Failed to load the factory) (Wrapped: Missi
ng or inaccessible constructor "com.oracle.coherence.environment.extensible.Exte
nsibleEnvironment(String)"
<configurable-cache-factory-config>
<class-name>com.oracle.coherence.environment.extensible.ExtensibleEnvironment<
/class-name>
<init-params>
<init-param>
<param-type>java.lang.String</param-type>
<param-value>C:/work/development/workspace/java/Coherence-Rest/cfg/cache-s
erver-config.xml</param-value>
</init-param>
</init-params>
</configurable-cache-factory-config>) java.lang.reflect.InvocationTargetExceptio
n
at com.tangosol.util.Base.ensureRuntimeException(Base.java:288)
at com.tangosol.net.ScopedCacheFactoryBuilder.getDefaultFactory(ScopedCa
cheFactoryBuilder.java:311)
at com.tangosol.net.DefaultCacheFactoryBuilder.getSingletonFactory(Defau
ltCacheFactoryBuilder.java:48)
at com.tangosol.net.DefaultCacheFactoryBuilder.getFactory(DefaultCacheFa
ctoryBuilder.java:121)
at com.tangosol.net.ScopedCacheFactoryBuilder.getConfigurableCacheFactor
y(ScopedCacheFactoryBuilder.java:112)
at com.tangosol.net.CacheFactory.getConfigurableCacheFactory(CacheFactor
y.java:126)
at com.tangosol.net.DefaultCacheServer.getDefaultConfigurableCacheFactor
y(DefaultCacheServer.java:364)
at com.tangosol.net.DefaultCacheServer.main(DefaultCacheServer.java:197)
Caused by: (Wrapped: Missing or inaccessible constructor "com.oracle.coherence.e
nvironment.extensible.ExtensibleEnvironment(String)"
<configurable-cache-factory-config>
<class-name>com.oracle.coherence.environment.extensible.ExtensibleEnvironment<
/class-name>
<init-params>
<init-param>
<param-type>java.lang.String</param-type>
<param-value>C:/work/development/workspace/java/Coherence-Rest/cfg/cache-s
erver-config.xml</param-value>
</init-param>
</init-params>
</configurable-cache-factory-config>) java.lang.reflect.InvocationTargetExceptio
n
at com.tangosol.util.Base.ensureRuntimeException(Base.java:288)
at com.tangosol.run.xml.XmlHelper.createInstance(XmlHelper.java:2652)
at com.tangosol.run.xml.XmlHelper.createInstance(XmlHelper.java:2536)
at com.tangosol.net.ScopedCacheFactoryBuilder.getDefaultFactory(ScopedCa
cheFactoryBuilder.java:273)
... 6 more
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstruct
orAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingC
onstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at com.tangosol.util.ClassHelper.newInstance(ClassHelper.java:694)
at com.tangosol.run.xml.XmlHelper.createInstance(XmlHelper.java:2611)
... 8 more
Caused by: java.lang.RuntimeException: Can't create a NamespaceContentHandler as
the URI scheme [http] in [http://www.w3.org/2001/XMLSchema-instance] is not sup
ported
at com.oracle.coherence.environment.extensible.DefaultConfigurationConte
xt$Scope.establishNamespaceContentHandlerFor(DefaultConfigurationContext.java:62
5)
at com.oracle.coherence.environment.extensible.DefaultConfigurationConte
xt.ensureNamespaceContentHandler(DefaultConfigurationContext.java:94)
at com.oracle.coherence.environment.extensible.DefaultConfigurationConte
xt.processElement(DefaultConfigurationContext.java:254)
at com.oracle.coherence.environment.extensible.DefaultConfigurationConte
xt.processDocument(DefaultConfigurationContext.java:204)
at com.oracle.coherence.environment.extensible.ExtensibleEnvironment.set
Config(ExtensibleEnvironment.java:438)
at com.tangosol.net.DefaultConfigurableCacheFactory.<init>(DefaultConfig
urableCacheFactory.java:193)
at com.tangosol.net.DefaultConfigurableCacheFactory.<init>(DefaultConfig
urableCacheFactory.java:179)
at com.tangosol.net.DefaultConfigurableCacheFactory.<init>(DefaultConfig
urableCacheFactory.java:155)
at com.oracle.coherence.environment.extensible.ExtensibleEnvironment.<in
it>(ExtensibleEnvironment.java:154)
... 14 more

Hi
Is there a reason you are using the 3.6 version of the incubator with Coherence 3.7 and not the latest INC-10 version? I suspect the 3.6 Incubator does not support normal XML schemas.
JK

Using Functions and/or Graphs with Custom Cell Formats in Numbers

I am attempting to use the AVERAGE function or create a graph in Numbers for cells with a custom format, however, I keep receiving an error message telling me that "Numbers can't be divided by Zero" or an empty graph.
The format I am using is for a split time for a certain distance, as in time it takes a runner to go around a track: minute:seconds.milliseconds i.e. 1:56.4
Is there a solution to the formatting or another way to accomplish having the correctly formatted cell and still be able to use functions and graphs.

Hi nich.lee,
You can't chart Duration formatted data without first converting it to another format. Also, you will get an error if you attempt to use the AVERAGE function on an empty range.
Here's an example of charting Duration data by using a conversion...
Best regards,
Jerry

Cannot burn DVD (using iDVD, and iMac G5 with Superdrive)

Hi. I'm trying to burn an iMovie onto a DVD-R (16x). I have an iMac G5 w/ Superdrive (PIONEER DVD-RW DVR-K04F). I have plenty of available disc space. iDVD goes through the entire burn process, then at the very end it spits out the disc with these errors:
The recording device reported the error #8: No additional sense information. (0x00, 0x00.)
The recording device reported the media error: Power calibration area error. (0x73, 0x03.)
Can someone PLEASE help me? What am I doing wrong?
THANK YOU!

Could be the brand of media you are using. Most users here find the most reliable to be Verbatim DVD-R.
Also, try burning at a lower speed.
Using 16x DVD media is fine - in fact it is difficult to buy any other - but there is a consensus in the Apple Support Forums that a slower burn is a better burn and that the most reliable brands are Verbatim, Maxell and Fuji, all DVD-R, burned at 2x or 4x (slow burns are better burns!). I always use Toast for burning.
I generally use Verbatim and when I can't get those, Fuji, and have never had a coaster from either.
Plenty of coasters in the early days from Sony, TDK and a few others.
The term "Best" means the fastest speed that the drive told Toast it can write to a specific disc. The drive's firmware and info on the disc decide what speed burns are available. When you press the speed setting button in Toast (after inserting a disc) you'll likely see some speeds in italics and some in bold face. The ones in bold face are supported by that media on that drive. The fastest one is what Toast calls Best.
Audio CDs in particular should be burned at the lowest supported speed.
Verification is a good indicator the disc is burned okay. However, other DVD players can still have problems with the disc. Media problems with various drives is not uncommon. Slower burning may reduce the chance of those problems, and is one of the reasons why RW (read/write) media is always rated slower than DVD-R.
There are some interesting facts here:
http://www.osta.org/technology/dvdqa/dvdqa4.htm and here:
http://www.osta.org/technology/dvdqa/dvdqa4.htm
But many will tell you that the 'slower burn is best' theory is outdated. Who really knows? At the end of the day, if your home-made DVD was verified by Toast and will play anywhere on anybody's DVD player, then that is the result we are all after!

Is it possible to use fullscreen and exclusive mode with a jfilechooser?

is there a way to use them together? while in fullscreen exclusive mode the jfilechooser doesn't attach to fullscreen window and it halts the program.. I've tried setting the parent frame as the fullscreen frame but it's all glitched.. am I missing something?
thank you,
best regards,
Jacopo

For reference, the cross-post can be found here:
Is it possible to use network devices (cDAQ-9188) with a PXI Real Time system?
Jayme W.
Applications Engineer
National Instruments

Using generics and J2SE together with JSF

Hi
Has anybody experience with using JSF together with J2SE 1.5? Especially generics? I would like to use generics and other improvements from J2SE in the model objects.
Thnaks in advance ... Rick

JSF 1.1 is specified for J2SE 5, and the new specification (JSF 1.2 and JSP 2.1) does not include generics.
If you are talking in terms of ValueBindings or MethodBindings, there really isn't any point since the implementation could only make the cast for you; and it would still not be able to garuantee type safety (the only reason to use generics).
That's not to say you couldn't use generics in your own development, but I don't think you will see generics incorporated into the specification any time soon.
Jacob Hookom (JSR-252 EG)

IPod Touch upgrade to use iMessage and it syncs with Dad's iPhone info!!! Using family pack Mobile Me. HELP???

I have three children that use iPod Touches. They are all iOS5 capable. I upgraded the first one this morning and it synced with my iPhone profile on iCloud. It asked for the iTunes account information which is what I believe caused this. We use Mobile Me Family Pack and each of the children have a unique @me.com account. How do I fix this problem so that each iPod has it's own unique login so that iMessage will work? I don't really want to open them up to any further exposure on the Web though... . As it stands I am able "micromanage" their contact list via Mobile Me. Is there any way to make the iPods behave correctly and still maintain parental control as well as allow them to keep their unique profiles and contact lists???
...and for some reason, after upgrading my son's iPod Touch... his apps all disappeared from the device??? Strange, as this worked perfectly when I upgraded my iPhone yesterday.
PS. All my upgrades are current. iOS5 on iPhone 4, iTunes 10.5 on MBP.

I spent about 2 hours on the phone with Apple Support... had to restore both devices! Arrrgggghhh!!! Thankfully the iPhone had a Backup from yesterday. The iPod wasn't too tough to get back up and running either... although we had to completely reload it as if it were new. Then we found out that Apple won't let the device login with my son's @me.com email because he's too young (10). Quick work-around for now until Apple fixes this was to lie about his age in the setup. I don't like the work around, but it worked.

My pavilion g6 does not have a number pad and i need to use the + and - that come with it?

I have a pavilion g6 and it doesnt have a number pad it also doesnt have any sort of num lock light but i really need to be able to use the + and - keys that come with the num pad as the other ones that are just below the f11 and f12 keys do not work for what i need and i would therefore like to know if there is any way to press a number pad plus and minus on my keyboard

Troubleshooting iMessage activation:
http://support.apple.com/kb/TS4268

Using dcmctl and enterprise manager with OracleAS 10.1.2.0.2

Hi
I know that in OracleAS 9.0.2 there were problems when you tried to use dcmctl and Enterprise Manager at the same time. Does OracleAS 10.1.2.0.2 has the same problem.

hello,
somewhere (i really don't remember where, but it was in the oracle documentation) i'm sure i read that already in 9.0.4 you could use dcmctl when enterprise manager was up. but i've never experienced it and i prefer not to try!!!
fabrizio

How to create store procedure using cursor, and looping condition with exce

Hi,
I am new in pl/sql development , please help me for follwoing
1. I have select query by joining few tables which returns lets say 100 records.
2. I want to insert records into another table(lets say table name is tbl_sale).
3. If first record is inserted into tbl_sale,and for next record if value is same as first then update into tbl_sale else
insert new row
4. I want to achieve this using store procedure.
Please help me how to do looping,how to use cursor and all other necessary thing to achieve this.

DECLARE
   b   NUMBER;
BEGIN
   UPDATE tbl_sale
      SET a = b
    WHERE a = 1;
   IF SQL%ROWCOUNT = 0
   THEN
      INSERT INTO tbl_sale
                  (a
           VALUES (b
   END IF;
END;note : handle exceptions where ever needed
Regards,
friend
Edited by: most wanted!!!! on Mar 18, 2013 12:06 AM

Using an external remote drive with Soundtrack

I've placed my external media drive in another room to prevent fan noise when doing voice overs in Soundtrack. I purchased a 30 foot firewire cable and a firewire 800 repeater. On which end do I need to use the repeater? On the drive end or computer end?
I've discovered that when the repeater is installed on the computer end of the cable, I have a difficult time ejecting the drive before shutdown. It just doesn't want to eject.
The repeater is a Gefen FW 800. The cable is FW 800

Sorry, Tom. I am sure I'm not being precise enough in my language. Let me put it this way.
Can I use a USB drive to import AVCHD video from a tapeless camera? I mean, I know I CAN, but is it okay to do so? Understand, I am a newbie over here, but you've probably already figured that out.
The situation is, I will be on the road for a week with my 4 tapeless cameras and my MacBook Air. Going to shoot all day, then go back to the hotel and pull the video off the cameras so I can continue shooting the next day. I was planning importing the video onto one external hard disk (file>import from camera) and also making an archive onto another external disk. That way I have a backup. Thunderbolt drives are still a bit too expensive for me, so I was going to bring one USB drive for the archive and one USB/firewire 800 drive for the "import from camera." Then when I get back home, I can hook that USB/firewire 800 up to my thunderbolt display connected to my MacBook Air. Or maybe by then I can get my school to get me a new iMac, which would be a better editing machine than the MacBook Air. Sound workable?

Using iPad and LogMein app with Mac Mini Server

Hello everyone, I'm new to the community and I would like to ask your opinions on something I'm considering.
I'm currently using a MacBook Air beyond its capabilities. I'm running a dual system via Parallels since some of my work programs are Windows based.
I'm planning to pass the MacBook Air down to one of my employees but I'm stuck on what I will purchase to replace it.
I like the new MacBook Pro, but I don't like the $2200+ price tag. So what I'm considering is buying a Mac Mini Server ($900) and setting it up in my office with a HDTV as a monitor because I use construction design programs and the laptop screen is just too small for large drawings. The Mac Mini also has 1TB storage vs 256GB on the MacPro. I already have an external disk drive so that's no issue either.
Also, since I still need mobile convenience, I'm considering downloading the "LogMein Ignition" app ($130) and using this to log in remotely with my iPad for complete access to all of my files and programs.
What are some pros and cons I should consider before making this move?
Thanks in advance for the help!
Kevin

> If your server is behind NAT, there is almost certainly no need for packet filtering and you should disable it.
I disagree, Linc. PF is very useful to block known bad IPs and brute force attacks, which are an hourly occurrence, especially on ssh. I use this PF configuration for OS X, which blocks brute force attacks, updates IP blocks from emergingthreats.net, and more. My logs and pf table "bruteforce" are full of attacks and blocked sites (sudo pfctl -t bruteforce -Ts). I also run snort on OS X and can see that the snort alert triggers are greatly reduced by simply blocking all these packets at the network layer.

Wanboot using s10u3 and http fails with error 416 with a small(ish) flar

Hi,
Using S10 u3 (11/06) to provision a wanboot server fails
with a 1.4Gb flash image -- output at foot. The flar is there,
perms 644, and I can open it in a web browser. The serverside
log in /tmp/bootlog.HOST gives the same information.
At OpenSolaris.org, this thread
http://www.opensolaris.org/jive/thread.jspa?messageID=82856
mentions a known bug 6509337 s10s_u3 wanboot fails but
like another user of opensolaris, I cannot find that bug -- nor
does searching sunsolve for wanboot 416 give any hits.
Has anyone but the 3 folk at opensolaris and I seen this?
Thank you for your time
Using rules.ok from http://10.23.0.49/config.
Checking rules.ok file...
Using profile: profile
Executing JumpStart preinstall phase...
Searching for SolStart directory...
Checking rules.ok file...
Using begin script: install_begin
Using finish script: patch_finish
Executing SolStart preinstall phase...
Executing begin script "install_begin"...
Begin script install_begin execution completed.
Wed Jan 31 14:10:56 wanboot info: WAN boot messages->10.23.0.49:80
Processing profile
- Opening Flash archive
ERROR: Unable to access the archive. The server returned 416: Requested Range Not Satisfiable
ERROR: Could not read file (http://10.23.0.49:80/flash/s10.flar)
ERROR: Flash installation failed
Solaris installation program exited.

Hi,
Using S10 u3 (11/06) to provision a wanboot server
fails
with a 1.4Gb flash image -- output at foot. The flar
is there,
perms 644, and I can open it in a web browser. The
serverside
log in /tmp/bootlog.HOST gives the same
information.
At OpenSolaris.org, this thread
http://www.opensolaris.org/jive/thread.jspa?messageID=
82856
mentions a known bug 6509337 s10s_u3 wanboot fails
but
like another user of opensolaris, I cannot find that
bug -- nor
does searching sunsolve for wanboot 416 give any
hits.
Has anyone but the 3 folk at opensolaris and I seen
this?
Thank you for your time
Using rules.ok from http://10.23.0.49/config.
Checking rules.ok file...
Using profile: profile
Executing JumpStart preinstall phase...
Searching for SolStart directory...
Checking rules.ok file...
Using begin script: install_begin
Using finish script: patch_finish
Executing SolStart preinstall phase...
Executing begin script "install_begin"...
Begin script install_begin execution completed.
Wed Jan 31 14:10:56 wanboot info: WAN boot
messages->10.23.0.49:80
Processing profile
- Opening Flash archive
Unable to access the archive. The server returned
416: Requested Range Not Satisfiable
ERROR: Could not read file
(http://10.23.0.49:80/flash/s10.flar)
ERROR: Flash installation failed
Solaris installation program exited.Same here:
Processing profile
- Opening Flash archive
ERROR: Unable to access the archive. The server returned 416: Requested Range Not Satisfiable
ERROR: Could not read file (http://199.17.241.103:80/wanboot/flar/flars/flar.sun4v.sol10_11_06.2)
ERROR: Flash installation failed
Solaris installation program exited.
Web server error log is clean, but access log contains the following:
199.17.247.252 - - [02/Feb/2007:21:35:31 -0600] "GET /cgi-bin/wanboot-cgi/?CONTENT=bootfile&IP=199.17.247.128&CID=0100144F0ED53C HTTP/1.1" 200 1087128 "-" "-"
199.17.247.252 - - [02/Feb/2007:21:35:40 -0600] "GET /cgi-bin/wanboot-cgi/?CONTENT=bootfs&IP=199.17.247.128&CID=0100144F0ED53C&NONCE=80E23BAF0AE7E91E0B8141E0B7B66323A300C4A6 HTTP/1.1" 200 379111 "-" "-"
199.17.247.252 - - [02/Feb/2007:21:35:42 -0600] "GET /cgi-bin/wanboot-cgi/?CONTENT=rootfs&IP=199.17.247.128&CID=0100144F0ED53C HTTP/1.1" 200 235 "-" "-"
199.17.247.252 - - [02/Feb/2007:21:35:42 -0600] "GET /wanboot/miniroot/miniroot.sun4v_sol10_11_06 HTTP/1.1" 200 273847296 "-" "-"
199.17.247.252 - - [02/Feb/2007:21:38:57 -0600] "HEAD /wanboot/flar/sysidcfg.patrick/sysidcfg HTTP/1.1" 200 - "-" "-"
199.17.247.252 - - [02/Feb/2007:21:38:57 -0600] "GET /wanboot/flar/sysidcfg.patrick/sysidcfg HTTP/1.1" 206 687 "-" "-"
199.17.247.252 - - [02/Feb/2007:21:43:27 -0600] "HEAD /wanboot/flar/rules.ok HTTP/1.1" 200 - "-" "-"
199.17.247.252 - - [02/Feb/2007:21:43:27 -0600] "GET /wanboot/flar/rules.ok HTTP/1.1" 206 341 "-" "-"
199.17.247.252 - - [02/Feb/2007:21:43:28 -0600] "HEAD /wanboot/flar/mybegin HTTP/1.1" 200 - "-" "-"
199.17.247.252 - - [02/Feb/2007:21:43:28 -0600] "GET /wanboot/flar/mybegin HTTP/1.1" 206 715 "-" "-"
199.17.247.252 - - [02/Feb/2007:21:43:28 -0600] "HEAD /wanboot/flar/profile.sol10_T2000_72g.0 HTTP/1.1" 200 - "-" "-"
199.17.247.252 - - [02/Feb/2007:21:43:28 -0600] "GET /wanboot/flar/profile.sol10_T2000_72g.0 HTTP/1.1" 206 501 "-" "-"
199.17.247.252 - - [02/Feb/2007:21:43:29 -0600] "HEAD /wanboot/flar/flars/flar.sun4v.sol10_11_06.2 HTTP/1.1" 200 - "-" "-"
199.17.247.252 - - [02/Feb/2007:21:43:29 -0600] "GET /wanboot/flar/flars/flar.sun4v.sol10_11_06.2 HTTP/1.1" 416 392 "-" "-"
showrev: Kernel version: SunOS 5.10 Generic_118833-33

Using thread and socket connection with other machines

Hi all!
we are using weblgoic 5.1 SP9 JDK1.2.2
we already using java.net.Socket and java.lang.Thread
to communication TANDEM Machine on the weblogic.
the reason why we use to socket and thread even though it is not
recommanded is that below
1. once we connect Socket, then we using until server shutdown or
connection may has the problem, so we're using thread to wait
java.io.Inputstream to read from socket.(if I using EJB, It can't
wait socket inputstream indefinetly, because it has timeout)
2. we're logging Database date sent or received with TANDEM Machine.
so we need Database Access. so we using Database Access
thru Weblogic.
3. EJB Application using (other EJB Application - send Module)
to send data to TANDEM Machine. So "Send Module" should
be implemented EJB.
but. Now I see there might be problem this framework.
so, is there some way by just using J2EE spec, to implement this kind of
framework.
wait for your great help !!
regards.

Yes i've tried interrupt method and it doesn't have any effects on the thread... it stay in connect() method...
And for the timeouts, in fact i use an API : J2SSH, to connect with SSH protocol, and the setting of connection timeouts is not implemented yet... and the default timeout is about 4 minutes...
so i don't know how to solve this problem...

Using Roland and/or Akai with Soundtrack

Similar Messages

Maybe you are looking for