Wanboot using s10u3 and http fails with error 416 with a small(ish) flar

Hi,
Using S10 u3 (11/06) to provision a wanboot server
fails
with a 1.4Gb flash image -- output at foot. The flar
is there,
perms 644, and I can open it in a web browser. The
serverside
log in /tmp/bootlog.HOST gives the same
information.
At OpenSolaris.org, this thread
http://www.opensolaris.org/jive/thread.jspa?messageID=
82856
mentions a known bug 6509337 s10s_u3 wanboot fails
but
like another user of opensolaris, I cannot find that
bug -- nor
does searching sunsolve for wanboot 416 give any
hits.
Has anyone but the 3 folk at opensolaris and I seen
this?
Thank you for your time
Using rules.ok from http://10.23.0.49/config.
Checking rules.ok file...
Using profile: profile
Executing JumpStart preinstall phase...
Searching for SolStart directory...
Checking rules.ok file...
Using begin script: install_begin
Using finish script: patch_finish
Executing SolStart preinstall phase...
Executing begin script "install_begin"...
Begin script install_begin execution completed.
Wed Jan 31 14:10:56 wanboot info: WAN boot
messages->10.23.0.49:80
Processing profile
- Opening Flash archive
Unable to access the archive. The server returned
416: Requested Range Not Satisfiable
ERROR: Could not read file
(http://10.23.0.49:80/flash/s10.flar)
ERROR: Flash installation failed
Solaris installation program exited.Same here:
Processing profile
- Opening Flash archive
ERROR: Unable to access the archive. The server returned 416: Requested Range Not Satisfiable
ERROR: Could not read file (http://199.17.241.103:80/wanboot/flar/flars/flar.sun4v.sol10_11_06.2)
ERROR: Flash installation failed
Solaris installation program exited.
Web server error log is clean, but access log contains the following:
199.17.247.252 - - [02/Feb/2007:21:35:31 -0600] "GET /cgi-bin/wanboot-cgi/?CONTENT=bootfile&IP=199.17.247.128&CID=0100144F0ED53C HTTP/1.1" 200 1087128 "-" "-"
199.17.247.252 - - [02/Feb/2007:21:35:40 -0600] "GET /cgi-bin/wanboot-cgi/?CONTENT=bootfs&IP=199.17.247.128&CID=0100144F0ED53C&NONCE=80E23BAF0AE7E91E0B8141E0B7B66323A300C4A6 HTTP/1.1" 200 379111 "-" "-"
199.17.247.252 - - [02/Feb/2007:21:35:42 -0600] "GET /cgi-bin/wanboot-cgi/?CONTENT=rootfs&IP=199.17.247.128&CID=0100144F0ED53C HTTP/1.1" 200 235 "-" "-"
199.17.247.252 - - [02/Feb/2007:21:35:42 -0600] "GET /wanboot/miniroot/miniroot.sun4v_sol10_11_06 HTTP/1.1" 200 273847296 "-" "-"
199.17.247.252 - - [02/Feb/2007:21:38:57 -0600] "HEAD /wanboot/flar/sysidcfg.patrick/sysidcfg HTTP/1.1" 200 - "-" "-"
199.17.247.252 - - [02/Feb/2007:21:38:57 -0600] "GET /wanboot/flar/sysidcfg.patrick/sysidcfg HTTP/1.1" 206 687 "-" "-"
199.17.247.252 - - [02/Feb/2007:21:43:27 -0600] "HEAD /wanboot/flar/rules.ok HTTP/1.1" 200 - "-" "-"
199.17.247.252 - - [02/Feb/2007:21:43:27 -0600] "GET /wanboot/flar/rules.ok HTTP/1.1" 206 341 "-" "-"
199.17.247.252 - - [02/Feb/2007:21:43:28 -0600] "HEAD /wanboot/flar/mybegin HTTP/1.1" 200 - "-" "-"
199.17.247.252 - - [02/Feb/2007:21:43:28 -0600] "GET /wanboot/flar/mybegin HTTP/1.1" 206 715 "-" "-"
199.17.247.252 - - [02/Feb/2007:21:43:28 -0600] "HEAD /wanboot/flar/profile.sol10_T2000_72g.0 HTTP/1.1" 200 - "-" "-"
199.17.247.252 - - [02/Feb/2007:21:43:28 -0600] "GET /wanboot/flar/profile.sol10_T2000_72g.0 HTTP/1.1" 206 501 "-" "-"
199.17.247.252 - - [02/Feb/2007:21:43:29 -0600] "HEAD /wanboot/flar/flars/flar.sun4v.sol10_11_06.2 HTTP/1.1" 200 - "-" "-"
199.17.247.252 - - [02/Feb/2007:21:43:29 -0600] "GET /wanboot/flar/flars/flar.sun4v.sol10_11_06.2 HTTP/1.1" 416 392 "-" "-"
showrev: Kernel version: SunOS 5.10 Generic_118833-33

Similar Messages

[DC2] An net use or LsaPolicy operation failed with error 67 - Moving AD from 2003R2 to Server 2012

Hello, i hope someone can help me with this tricky situation.
The plan is to move AD from 2003R2 name "DC" to a server 2012 "DC2"
I have made all the adjustments and transferred all the role to the new 2012 server, and both are now GC servers.
The problem is "transferring" the netlogon share.
in DCDIAg on the new server i get:
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = DC2
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\DC2
Starting test: Connectivity
......................... DC2 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\DC2
Starting test: Advertising
......................... DC2 passed test Advertising
Starting test: FrsEvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... DC2 passed test FrsEvent
Starting test: DFSREvent
......................... DC2 passed test DFSREvent
Starting test: SysVolCheck
......................... DC2 passed test SysVolCheck
Starting test: KccEvent
......................... DC2 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... DC2 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... DC2 passed test MachineAccount
Starting test: NCSecDesc
......................... DC2 passed test NCSecDesc
Starting test: NetLogons
Unable to connect to the NETLOGON share! (\\DC2\netlogon)
[DC2] An net use or LsaPolicy operation failed with error 67,
The network name cannot be found..
......................... DC2 failed test NetLogons
Starting test: ObjectsReplicated
......................... DC2 passed test ObjectsReplicated
Starting test: Replications
......................... DC2 passed test Replications
Starting test: RidManager
......................... DC2 passed test RidManager
Starting test: Services
NtFrs Service is stopped on [DC2]
......................... DC2 failed test Services
Starting test: SystemLog
......................... DC2 passed test SystemLog
Starting test: VerifyReferences
......................... DC2 passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : dom1
Starting test: CheckSDRefDom
......................... domain passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... domain passed test CrossRefValidation
Running enterprise tests on : domain.xxxxx.no
Starting test: LocatorCheck
......................... domain.xxxxx.no passed test LocatorCheck
Starting test: Intersite
......................... domain.xxxx.no passed test Intersite
I have as a last option the burflags issue, i tried this with the option D2, but i think i have done it wrong, because the netlogon share is gone on the old DC. i took a backup of the files and folders before
i did this. http://support.microsoft.com/kb/290762/en-us But i am a little confused on which server i am going to set the D4 value on now? COuld someone help? Best regards Aksel

Hello Dirk
And thank you for your answer, in regards of the KB, do i have to follow the steps regarding:
Global vs. replica set specific reinitialization
You can locate the replica set specific
BurFlags
registry key by determining the GUID for the replica set that you want to configure. To determine which GUID
corresponds to which replica set and configure a restore, follow these steps:
Click Start, and then click Run.
In the Open box, type cmd and then press ENTER.
In the Command box, type net stop ntfrs.
Click Start, and then click Run.
In the Open box, type regedit and then press ENTER.
To determine the GUID that represents the replica set that you want to configure, follow these steps:
Locate the following key in the registry:
KEY_LOCAL_MACHINE\System\CurrentControlSet\Services\NtFrs\Parameters\Replica Sets
Below the Replica Sets subkey, there are one or more subkeys that are identified by a GUID. In the left pane, click the GUID, and then in the right
pane note the Data that is listed for the Replica Set Root value. This file system path will indicate which replica set is represented by this GUID.
Repeat step 4 for each GUID that is listed below the Replica Sets
And so on?
I have only thos 2 DC's in the network...

I am trying to install CS6 Design and Web Premium trial and it fails with error code 20

I am trying to install CS6 Design and Web Premium trial and it fails with error code 20

Re-extract or copy the contents of the installer. Let us know if this helps.
See http://helpx.adobe.com/x-productkb/global/installation-launch-log-errors-creative.html

Time Machine spends hours partially backing up and then fails with "Time Machine couldn't complete the backup due to a network problem." Tried suggestions I've seen on the forum.

Time Machine spends hours partially backing up and then fails with "Time Machine couldn't complete the backup due to a network problem." I've tried various suggestions I've seen on the forum but nothing has worked. TIme Machine worked fine for the last two years and just suddenly started having this problem every time. The only thing that was a little different is that the computer was off for a week while on vacation and then I added a large amount (20 GB) of photos. Now the requested backup size is 82GB, which is large, and process proceeds very slowly for 2-3 hours before failing with the message mentioned. I have more than enough available backup storage space for it. Before failing, Time Machine has backed up no more than 12GB or so of the backup. It fails during different files each time.
I've turned off the computer sleep feature, and I've checked that the NAS is set to never automatically power down. I normally backup over Wi-Fi, but I've also tried connecting to Ethernet and it still has the same problem. It's odd because I also have a MacBook Pro that is still backing up fine to the same NAS using the MacBook's Time Machine.
I am using an iMac with OS X 10.6.8 and an Iomega StorCenter ix2-200 NAS.
I have system logs that I can share if helpful. The logged messages vary a bit from run to run, but here are some messages that I've been seeing:
I always get this message near the beginning of the backup:
Event store UUIDs don't match for volume: Macintosh HD
I've gotten this messsage a number of times:
Bulk setting Spotlight attributes failed.
One Day
Stopping backupd to allow ejection of backup destination disk!
Another day
1/7/12 10:44:20 AM
mDNSResponder[18]
PenaltyTimeForServer: PenaltyTime negative -112916, (server penaltyTime -1132397006, timenow -1132284090) resetting the penalty
1/7/12 10:46:37 AM
kernel
ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0x1106be94
1/7/12 10:46:37 AM
kernel
AFP_VFS afpfs_DoReconnect started /Volumes/TimeMachine prevTrigger 0 currTrigger 1
Another Day
1/6/12 8:03:22 AM
Google Chrome[164]
Cannot find function pointer CMPluginInFactory for factory 3487BB5A-3E66-11D5-A64E-003065B300BC in CFBundle/CFPlugIn 0x16f99e20 </Users/smarmer/Library/Contextual Menu Items/Google Notifier Quick Add CM Plugin.plugin> (not loaded)
1/6/12 8:04:02 AM
com.apple.backupd[193]
Copied 7.5 GB of 67.0 GB, 8866 of 8866 items
1/6/12 8:06:58 AM
/System/Library/CoreServices/CCacheServer.app/Contents/MacOS/CCacheServer[1013]
No valid tickets, timing out
1/6/12 8:29:44 AM
mDNSResponder[19]
PenaltyTimeForServer: PenaltyTime negative -148702, (server penaltyTime 2056822773, timenow 2056971475) resetting the penalty
1/6/12 8:59:22 AM
kernel
ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0xa5ac380
1/6/12 8:59:22 AM
kernel
AFP_VFS afpfs_DoReconnect started /Volumes/TimeMachine prevTrigger 0 currTrigger 1
1/6/12 8:59:22 AM
kernel
AFP_VFS afpfs_DoReconnect: doing reconnect on /Volumes/TimeMachine
1/6/12 8:59:22 AM
kernel
AFP_VFS afpfs_DoReconnect: soft mounted and hidden volume so do not notify KEA for /Volumes/TimeMachine
1/6/12 8:59:22 AM
kernel
AFP_VFS afpfs_DoReconnect: Max reconnect time: 30 secs, Connect timeout: 15 secs for /Volumes/TimeMachine
1/6/12 8:59:22 AM
kernel
AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/TimeMachine
1/6/12 8:59:22 AM
kernel
ASP_TCP asp_SetTCPQoS: sock_settclassopt got error 57
Another day
1/5/12 3:48:55 PM
mdworker[2128]
CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
1/5/12 4:24:54 PM
mDNSResponder[19]
PenaltyTimeForServer: PenaltyTime negative -42698, (server penaltyTime 1148718961, timenow 1148761659) resetting the penalty
1/5/12 4:29:58 PM
com.apple.backupd[2074]
Copied 586.4 MB of 67.0 GB, 9891 of 9891 items
1/5/12 4:39:00 PM
kernel
ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0xa1c0380

bokon0n wrote:
1/11/12 8:53:30 AM
com.apple.backupd[1169]
Warning: Destination /Volumes/TimeMachine does not support TM Lock Stealing
1/11/12 8:53:30 AM
com.apple.backupd[1169]
Warning: Destination /Volumes/TimeMachine does not support Server Reply Cache
Those indicate that your NAS is not fully compatible with Snow Leopard.
1/11/12 8:53:35 AM
kernel
jnl: disk2s2: replay_journal: from: 67182592 to: 78680064 (joffset 0xa7b8000)
1/11/12 8:53:39 AM
kernel
jnl: disk2s2: examining extra transactions starting @ 78680064 / 0x4b09000
1/11/12 8:53:39 AM
kernel
jnl: disk2s2: Extra txn replay stopped @ 79056896 / 0x4b65000
1/11/12 8:53:49 AM
kernel
jnl: disk2s2: journal replay done.
1/11/12 8:53:49 AM
fseventsd[41]
event logs in /Volumes/Time Machine/.fseventsd out of sync with volume. destroying old logs. (253512 14 253512)
1/11/12 8:53:50 AM
kernel
hfs: Removed 1 orphaned / unlinked files and 0 directories
That looks like a problem was found with the file system (data) on the TM disk. I don't know the details, but OSX tried to recover it from the journal, and found extra data on the drive. Likely a result of the incompatibility mentioned above.
1/11/12 9:47:40 AM
com.apple.backupd[1169]
Bulk setting Spotlight attributes failed.
That's a problem writing to the NAS drive.
But the backup continued after all this.
1/11/12 1:25:07 PM
kernel
ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0x9d00b44
Something caused a disconnect. Can't tell from the log what it was.
I doubt it's a problem with something in OSX being damaged or corrupted, but reinstalling OSX isn't a major hassle, so might be worth a try.
To be incompatible with Snow Leopard, this NAS must be at least a couple of years old. It may be beginning to fail.
Contact the maker. See if there's an update to make it compatible with Snow Leopard. If so, that might fix it.
If not, or if that doesn't fix it, see if they have any diagnostics that will shed any light.

I tried to implement photo albums using iweb and got a publishing error.

I tried to implement photo albums using iweb and got a publishing error. All was fine with my site until I added the photo album page. The software doesnt say what the error is exactly, only that it is a publishing error to my ftp
Exact message "There was an error communicating with the FTP server. Try again later, or check with your service provider."
If I reduce the albums inside to 1 then it seems to work but that takes away from the usefullness of multiple albums.
my iWeb version is 3.0.4 (601)

Publish your site to a folder on your hard drive to see if the publication will proceed successfully and open the site locally with your browser to confirm all of the alums are there and work. If they do try the following:
delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
Click to view full size
launch iWeb and try again.
If you're still not able to publish from iWeb to your server download and use the free Cyberduck to upload your website files to the server. Users have found that CD has been successful when iWeb had problems.
OT

Upload XML data using XSQL and HTTP Post ?

Upload XML data using XSLQ and HTTP Post: is that possible ?
An xsql contains an <xsql:insert-request table="aTable">
The XML data file follows the ROWSET/ROW paradigm.
What is the HTML form to upload the xml file to the XSQL ?
I tried:
<form action="myXSQL.xsql" method="POST" ENCTYPE="multipart/form-data">
XML data file to upload: <input type="file">
<input type="submit">
</form>
But the answer of myXSQL is:
<xsql-status action="xsql:insert-request" result="No posted document to process" />
Where is the problem ?
Thank you.

Hello,
You are posting your XML file as a parameter therefore you should use the <xsql:insert-params/> tag, not the <xsql:insert-request/>. The insert-request can only handle data not posted via a parameter.
Usage:
<form action="myXSQL.xsql" method="GET" ENCTYPE="multipart/form-data">
XML data file to upload: <input type="file" name="myXML">
<input type="submit">
</form>
in combination with
<xsql>
<xsql:insert-params name="myXML" table="your table"/>
</xsql>
2 remarks:
I was not able to succesfully POST the form. The answer was <xsql-status action="xsql:insert-request" result="No posted document to process" />. With GET is was succesfull.
Second, if you use MSInternet explorer 5 or higher use could post the XML directly (not aw parameter) using an ActiveX object.
Regards,
Harm Verschuren

I ran the Adobe installer for CC desktop and it failed. Error: 50 What happened? Now the Run.exe file is gone.

I ran the Adobe installer for CC desktop and it failed. Error: 50 What happened? Now the Run.exe file is gone.

Hi,
Please refer to the thread below where this issue has been discussed:
Error code 50
Regards,
Sheena

MacBook will not start. I have restarted with original CD. I have used Utilities and "no problem" with hard drive. I have reset PRAM. I have tried safe boot. Nothing is work. Gray screen with Apple logo and rotating wheel. Thanks for any suggestions!

MacBook will not start. I have restarted with original CD. I have used Utilities and "no problem" with hard drive. I have reset PRAM. I have tried safe boot. Nothing is work. Gray screen with Apple logo and rotating wheel. Thanks for any suggestions!

Snow Leopard is a Mac OS X version. You say that it's the version you have in your Mac (10.6.8). Do a back up of your files, format the hard drive (using Disk Utility) and reinstall again

Problems connecting to SSRS using IReportServerCredentials, the request failed with http status 401: unauthorized

We have a hosted SSRS server and we access it's reports using the reportviewer in an ASP.net application.
We are getting the error: The request failed with HTTP status 401: Unauthorized. When trying to run one of the reports. I have confirmed that the login details work when logging into the report manager page directly.
I have implemented an instance of IReportServerCredentials in a separate class (below) and I call it from the page before it tries to access the report. I'm not sure if this is all I need but can't seem to find any other info.
I have managed to gain access connecting to the external server from my PC and accessed the report, but when I promote the code to production and run it from there on my local PC I get the unauthorized message again: the request failed with http status
401: unauthorized
The class:
[Serializable]
public sealed class MyReportServerCredentials :
IReportServerCredentials
public WindowsIdentity ImpersonationUser
get
// Use the default Windows user. Credentials will be
// provided by the NetworkCredentials property.
return null;
public ICredentials NetworkCredentials
get
// Read the user information from the Web.config file.
// By reading the information on demand instead of
// storing it, the credentials will not be stored in
// session, reducing the vulnerable surface area to the
// Web.config file, which can be secured with an ACL.
// User name
string userName =
ConfigurationManager.AppSettings
["MyReportViewerUser"];
if (string.IsNullOrEmpty(userName))
throw new Exception(
"Missing user name from web.config file");
// Password
string password =
ConfigurationManager.AppSettings
["MyReportViewerPassword"];
if (string.IsNullOrEmpty(password))
throw new Exception(
"Missing password from web.config file");
// Domain
string domain =
ConfigurationManager.AppSettings
["MyReportViewerDomain"];
return new NetworkCredential(userName, password);
public bool GetFormsCredentials(out Cookie authCookie,
out string userName, out string password,
out string authority)
authCookie = null;
userName = null;
password = null;
authority = null;
// Not using form credentials
return false;
The call to the class, just before the report is run:
if (GetConnection.GetConnectionString().ToString().Contains("IP of external server removed"))
invoiceviewer.ServerReport.ReportServerCredentials = new MyReportServerCredentials();
We have tried so many things here, we don't even care whether the server authenticates or not but it appears to be as standard. Our hosting company has also drawn a blank and changed so many settings to no ava

Hi Nasa1999,
According to your description, you are getting the error: The request failed with HTTP status 401: Unauthorized when you access the report using the ReportViewer in an ASP.net application.
Regarding the 401 error, it could cause by the Service Principal Name(SPN) for the account the Reporting Services is running under hasn’t been registered when the Reporting Services is configured to use Kerberos authentication. So in your scenario,
please check if you are using Kerberos authentication. If that is a case, please make sure SPN is configured correctly. For more information, please refer to the similar thread:
The request failed with HTTP status 401: Unauthorized. in SSRS.
If issue persists, please check the Reporting Service error log (default location: %programfiles%\Microsoft SQL Server\<SQL Server Instance>\Reporting Services\LogFiles) around the time that the error message thrown out.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

WebDav using https fails with network name cannot be found.

When I attempt to connect to a Webdav server from a Windows 8.1 box it fails with
System Error 67 has occurred.
The network name cannot be found.
I am using the net.exe USE command with the following syntax:
net.exe use Z: https://dav.DomainYaya.com/ <PASSWORD> /user:USERNAME
This exact syntax works for Windows 7.
I have more than one Windows 8.1 box where this fails.
There are various suggestions found all over the internet for various other situations. They do not apply or do not work.
For example, you will find an issue involving sending Basic authentication over http where there are suggestions about changing HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\WebClient\Parameters
That does not work. There is also discussion about the Webclient service. (it is running). One can find discussion of the redirector. (The SYS file is present and is installed with Windows 8+ anyway.)
Using HTTP only fails similarly but with error 53 (but I only did that as a test.) The issue is the HTTPS version.
I have BTW tried this with two different webdav servers.
Any help is appreciated.
Joe

Hi Joe,
Based on our research, the error 67 have the following several possable causes:
•IIS is not installed or is not running on the server that you are attempting to connect to.
•You have not installed the WebDAV Redirector on your client system.
•The WebClient service is not running on your client system.
•You have not enabled WebDAV on your web site.
•You are using Basic Authentication and connecting to your web site using HTTP instead of HTTPS.
•You are connecting to a web site on your local network that is using Fully-Qualified Domain Names (FQDNs) for name resolution, your web site uses Windows Authentication, and you have not added the web site's FQDN to the proxy server bypass list on your client.
For more information, please refer to the article as below:
Using the WebDAV Redirector
http://www.iis.net/learn/publish/using-webdav/using-the-webdav-redirector
According to the test, I am able to reproduce this issue in my lab. By default, the Webclient service is not running on windows 8.1 client. But for windows 7 client this service is running by default.
So please try to start the WebClient service on windows 8.1 client to check if it helps.
If you have any question, please don't hesitate to let us know.
Karen Hu
TechNet Community Support

Exchange 2010 RPC over HTTPs failing with authentication error

Hi. I have my remote.xxx.co.uk domain and autodiscover.xxx.co.uk domain pointing to my SBS2011 server, have ports 25, 80, 443 open. The Microsoft Connectivity Analyzer fails with the below error.
Outlook will autodiscover happily on the local network, and works fine. Phones etc do too.
Outlook at a remote VPN connected site won't connect through autodiscover, but will if you do it manually (ignoring the RPC Proxy settings). Everything works for a while, but then I guess outlook decides to use autodiscover to complete all the connection
details, and then these machines can no longer connect to exchange as I guess they decide the speed is too slow and try to connect using RPC instead.
Users can access OWA happily, and activesync is working on phones etc.
SSL cert is a wildcard type on my domain, and certs are installed - all green and happy when visiting OWA on both remote.xxxxx.co.uk and autodiscover.xxxxx.co.uk domains.
I cannot work out why I have an authentication error for RPC?
Any advice would be great!
Testing HTTP Authentication Methods for URL https://remote.xxxxx.co.uk/rpc/rpcproxy.dll?xxxxxx.xxxxxx.local:6002.
The HTTP authentication test failed.
Additional Details
Exception details:
Message: The operation has timed out
Type: System.Net.WebException
Stack trace:
at System.Net.HttpWebRequest.GetResponse()
at Microsoft.Exchange.Tools.ExRca.Extensions.RcaHttpRequest.GetResponse()
Elapsed Time: 100065 ms

Hi.
To update.
I tried to recreate the virtual directories in the Exchange Management Console, using the recreate links and via the shell, but while they were recreated, they did not function as they should due to issues in the meta database.
I then found the following which worked.
Looking at the ActiveSync virtual directories, when running the below command, the result showed the directory was there, so I then knew to delete it.
In EMS I ran,
=> Ran "$site = [ADSI]"IIS://localhost/W3SVC/1/Root/Microsoft-Server-ActiveSync""
Result: Carriage return.
=> Ran "$site"
Result:
distinguishedName:
Path: {C:\Program Files\Microsoft\ExchangeServer\V14\Client Access\Sync}
In EMS I then ran,
=> Ran "$Site = [ADSI]"IIS://localhost/W3SVC/1/Root""
Result: Carriage return.
=> Ran "$site.Delete("IIsWebVirtualDir","Microsoft-Server-ActiveSync")"
Result: Carriage return.
=> Ran "$site.SetInfo()"
Result: Carriage return.
=> Ran "$site"
Result: Carriage return.
=> Ran "iisreset"
I then recreated the virtual directories.
In EMS I ran,
=> Ran "New-ActiveSyncVirtualDirectory -WebSiteName "Default Web Site""
Results: Successfully recreated.
=> Ran "iisreset"
I am not sure exactly, but I did this for multiple virtual directories, and everything came to life just as it should.

After installing Firefox 4 Beta 9, using Manual Proxy Configuration fails to connect to the internet and also fails with corporate intranet. Has anything changed?

Initially, Firefox 4 Beta 8 is installed. Manual Proxy Configuration was used, and worked fine.
After installing Beta 9 using the built-in updater, connecting to internet and intranet fails instantly with Page Not Found error. Restarting Firefox does not fix the problem.
Clean install of Beta 9 also exhibits the same problems.

I have this problem too...
about:extension >> http://pastebin.com/txJgvZsq

Crystal Reports export and print fails with SSL / https but works with http

Windows 2008 Server, 32-bit (IIS7)
ASP.NET 2.0
Ajax 1.0
Crystal Reports version 10.5.3700.0
http: printing works, export works
https: printing not working, only export to MS Excel and MS Word work.
I am able to generate reports using both http and https, and the toolbar icons are all showing. However, I am unable to print or export properly with SSL.
Printing prompts me with a select printer window, and then a window 'Retrieving Page 1' follow by two messages from Crystal Print Control both stating:
A communication error occured. Printing will be stopped.
Exporting generates various errors depending on which export method is being selected (however Excel and Word work over https).
I've found the same problem on this site and other forums, but never a resolution to get exporting and printing to work with SSL. Will someone please provide me assistance or possibly relay what settings they're using if they have Crystal Reports export or printing working over SSL in IIS7? Everything works fine when I change the address from https to http.
Please let me know if I can help by providing further information. We've gone through a great deal of possible solutions with code and I'm currently looking in to IIS settings again.
Thank you.

Thanks Ludek. I got it by searching KB number.
Unfortunately, it didn’t fix my problem even my IE (IE8 and IE 9) has correct setting. I double check my version. PrintControl.CAB is version 10.2.0.1146. we use VS 2005 Crystal report and VB .NET. It works fine on HTTP. But when we use HTTPS (SSL Certificate from go daddy).
1: Crystal report export
            Export to MS Excel, Word: pop us “File download”, then click “Save”. It says “Internet Explorer cannot download ReportView.aspx from my site. Internet Explorer was not able to open this internet site. the requested site is either unavailable or cannot be found. Please try it again later”
            Export to RPt, Rich text format: It says “Internet Explorer cannot download ReportView.aspx from my site. Internet Explorer was not able to open this internet site. the requested site is either unavailable or cannot be found. Please try it again later”
            Export to PDF : nothing happened.
2: Print:
            Pop up dialog to select printer, click “Print” “. Shows windows “Crystal Report Viewer” and pop us error message box. Title is “Crystal Print Control”. Message is “An communication error occurred. Printing will be stopped”. Click “OK” and pop up error message box again.
Please advise.
Thank you very much!

Help. Trying use imessage and keep getting an error message that says the person is not registered with imessage

I am trying to use imessage and everyone I am trying to send to I keep getting a message that they are not registered with imessage. They all have iphones and I know for a fact they are all registered. I have tried all the trouble shooting steps I have found so far. I made sure my imessage is turned on and set under my apple id and email, I'm connected to wifi. etc... I can use facetime but can not message anyone. Thanks in advance for you help

Hi, reagans3.
Thank you for visiting Apple Support Communities.
I see you are experiencing issues with iMessage. I am not sure what troubleshooting steps that you have processed; however, there are some additional steps in the article below that may help.
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Cheers,
Jason H.

On a windows 7 PC, I tried to update to itunes 10.7 and nothing happens. itunes locks up. Just before this, I downloaded ios6 for my iphone 4 and it failed with an error message to that effect. The iphone is also locked up.

itunes freezes up with no error message. Previous to this, I downloaded ios6 for iphone and that failed as well. The iphone is frozen too. Any ideas?

Dear Jody..jone5
Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
Goodluck
Atousa

Wanboot using s10u3 and http fails with error 416 with a small(ish) flar

Similar Messages

Maybe you are looking for