Using RSRD_BROADCAST_STARTER to run Broadcast setting with ALEREMOTE

Hi all
I'm experiencing some problems executing a broadcast setting using RSRD_BROADCAST_STARTER in a process chain.
If I were to go into RSRD_BROADCAST_STARTER and type in the broadcast setting and click on the checkbox for Execute Online, I am able to receive the broadcast email
However in a Process Chain, if I were to schedule the execution of RSRD_BROADCAST_STARTER with variant of similar selection, I would not receive any broadcast email.
It seems that when executing through the Process Chain, the userid is ALEREMOTE rather than my userid. Is the ALEREMOTE unable to use the option "Execute Online"? What settings do I need to configure such that the ALEREMOTE can work in this case? Btw, ALEREMOTE has access to SAP-ALL.
Thanks
Brendan

Execute the setting online will take the authorization of current logged on user, while executing the setting in background will uses the authorization user indicated in the setting. You need to check if the Authorization user of the setting indeed has access to all the objects that suppose to be broadcasted.

Similar Messages

Broadcast Setting with Cust. Exit Variables & Manually Entered Variables

I have a sales report with the following parameters:
Week (defaulted via customer exit)
Sales Office (defaulted via customer exit)
Sales Group (defaulted via customer exit)
Customer Number (not defaulted)
Based on information that is automatically determined when a user executes this report the Week, Sales Office & Sales Group automatically populate. Customer is blank.
I would like to create a number (say 5) of broadcast settings to send user-specific data to members of a role. In the settings I would like the first 3 parameters to default automatically but I would like to enter specific values of 5 customers. For instance, users would receive data for their sales office & group for the prior week related to Customer 1, then in a separate email (from a separate setting) they will get their specific info for Customer 2, and so on.
My issue is I can either not create a variable assignment and then the query runs for ALL customers or I can create a variable assignment for a specific customer but then the values for the other 3 parameters are also saved and my Customer Exits do not work.
In R/3 or in BEX Analyzer I could create a variant and for the first 3 variables I would choose Save Field Without Values so that my Customer Exit would populate these fields. Then I would enter a specific value for the 3rd variable. I don't see a way to accomplish this same requirement with the Create Variable Assignment piece of the broadcaster. Am I missing something?

Hello Jonathan
have you fixed your problem meanwhile?
We are having a similar problem:
We would like to use the SAP exit feeded variable 0CMONTH (reference charateristic: 0CALMONTH) for broadcasting functionalities, based on a query.
0CMONTH itself has SAP-default setting under details' property "Variable is Ready for Input", flag active set.
If we select such query for broadcasting functions, creating some variants with characteristic variable 0CMONTH, how would these variants behave after the current month will change, changing to the next month?
Example for 0CMONTH:
Now: July 2008, 07.2008
Next month: August 2008, 08.2008
Would the initial created and saved broadcaster variants also change the month-setting as it would do in the BEx area?
Or must the user change these variants each month again?
Any reply is much appreciated.
The Chäsitzer

Information broadcaster setting with 2 variants

Hi Experts,
I have a workbook to broadcast, there are two different queries in this workbook and they have the same variables.
I am creating IB settings with this workbook, but precalculation failed to send it out.
I believe the problem is with variant, I have created variant for both queries in the workbook and have the same name (variant contents are the same)
say if we have two variants for two different queries in the workbook, is it possible to set up IB using variant and how?
Please let me know if there is any solution to my issue, if not I will just use variable assignement (a bit work on this one, a lot of material codes and others, plus, I need to create more multiple IB settings for this workbook).
Kind Regards!
Feng

No replys

Using LabView to run VB program with parameters

Hi,
It's my first message here so I hope I am doing things correctly. I tried to do some research before asking and I found a lot of good informations but right now, I seem to be stuck.
I am quite new to LabView, I did few VIs here and there but nothing really "serious". I am currently working on a LabView interface that deals with VB, Excel macros and Data extraction from Text file.
The VB program is in charge of a motor position, then, some Excel macros are used to do some measurement and the results are written in a text file that I use to plot some graphs.
The VB program I made give the window I put in the picture in the attached files. Basically, you have to enter some values in those TextBox then click on Move and the motor will move. When you click on the button Home, the motor moves back to the position "0", no need of the two TextBox. In my labview interface, I created two ComboBox that contain all the possible values for both of the TextBox of my VB program. What I would like to do, when I click on my "Measure" button on LabView that initiates the VB program, is that it can fill the two TextBox from VB with the data entered in my LabView ComboBox and then run the program, simulating a "click" on the Move button.
Right now, I found a VI (included in the attached files) that runs my VB program from LabView (I use it as a Sub-VI) but I still have to manually put the values in my VB program. My goal would be that when I click on my LabView button to start my measure, the motor moves but the VB program doesn't show up for the user to manually enter the values he wants.
I hope I was clear but if you need any clarification.
I did the the VB program myself.
I can also link the LabView interface I already created if need be.
Thanks for your help,
Baptiste
Attachments:
Moteur.png ‏5 KB
lancerEXE.vi ‏9 KB

First, thank you for your answers.
I know that I don't need to use VB or LabView. I just want for myself to be able to use LabView to manage a program in VB, one in VBA and use data from a text file. I know I could write everything in VBA and that would get the job done. The thing is I want to get away from VBA and Excel as much as I can. In the future, the plan would be to re-write my VBA program with LabView but as of now, I just want to use LabView to manage everything. I know I don't really need it but I want to learn how to do it and have something that works.
So I would like to know if there is way to do what I wish to do, running my VB program with parameters coming from LabView.
Thanks

Broadcast Setting - Bursting : Could not determine recipient

Hello,
I created broadcast setting for template using option bursting.
Template is broadcasted by district (attribute of 0plant).
Here is the option for broadcasting.
Chracteristic for receipient determination : Generate Document with Variable Value
            Variable : District
Selection of the Characteristic Values : By Following Selection
It had worked sucessfully for several months, by now from time to time ,
I would say 60% of broadcastings ended with error: Bursting: Could not determine recipient
When I run broadcast setting the second time , it's always ended sucessfully, and send templates to districts.
Could you please advise how to fix this.
I can not imagine what could cause this strange behavior,
so I'll be very appreciated for any help.
Thanks in advance,
Alena Yershova

can you install http watch on you internet explorer and run it and it will show you where its holdin gup.. or i am not sure if you can broadcasting from back end system..

How to run others applications with abap commands

Is there a mothed that can use it to run an application with abap statement?
for example: how to open a text file in program with abap command?
thank you very much.

CALL FUNCTION 'WS_EXECUTE'
EXPORTING
DOCUMENT = ' '
CD = ' '
 COMMANDLINE = ''
INFORM = ' '
 PROGRAM = 'NOTEPAD'
STAT = ' '
WINID = ' '
OSMAC_SCRIPT = ' '
OSMAC_CREATOR = ' '
WIN16_EXT = ' '
EXEC_RC = ' '
IMPORTING
RBUFF =
EXCEPTIONS
FRONTEND_ERROR = 1
NO_BATCH = 2
PROG_NOT_FOUND = 3
ILLEGAL_OPTION = 4
GUI_REFUSE_EXECUTE = 5
OTHERS = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Here...
In the CommandLine you can give the path where the file is located like for Example
C:\Test\Hello.txt.
In the Program you need to give the application that you want to open that file.
if helpful reward points...
Regards,
Vivekananda Varma Dandu

How to change query navigational state in broadcast setting

Dear experts,
I have a question information broadcasting in BW 3.5
We have the following usage of broadcast settings
- open query with bex web
- add special filters, drill-downs etc.
- add this as a new broadcast setting with Mail recipients etc. - the format is "html-file"
- schedule the setting
This works fine.
But, if I have to make changes to the navigational state (e.g. set additional filter) of the broadcasted query for the future - how can I do that?
How can I open the "view" behind the setting directly?
Best wishes
Gregor

I have not found a solution yet but currently I have a workaround:
Before switching to Broadcaster I generate a bex-web-bookmark.
Then i add this bookmark in the text of the broadcasting seeting.
Gregor

How can i use isight camera to broadcast to web with Mac OS 10.4?

I am using an iBook G4 running OS 10.4 as a printer server. I have to do this to be able to print on my HP DeskJet 882c printer from computers running OS 10.6 and above (although I have not been able to get it to work with 10.8).
I can connect an iSight camera to the iBook via FireWire. Can I set that up to broadcast a video feed to a web site so I can visually monitor the area near the laptop and printer?

jrmnewtonma wrote: How can i use isight camera to broadcast to web with Mac OS 10.4?
You could use compatible older versions of QuickTime professional extensions for your Mac OS X version.
This professional quality software is very powerful, and it will certainly stream any video you need. However, it is not simple to use, so be prepared to do some research and study to get it configured and working.
To use your iBook with its OS X 10.4, you will need QuickTime Broadcaster 1.5.3
and Darwin Streaming Server (v5.5.5) (if you need streaming server functions.)
Although I have never used it, QuickTime Streaming Server 4.1.1 might be a useable substitute for Darwin.
Message was edited by: EZ Jim
Mac OSX 10.8.3

I have iMac and need a good photo editing program to use. Reviews say aperture runs really slow with Lion, any suggestions?

I need a program where I can remove objects and touch up dead grass, etc.

Reviews say Aperture runs really slow with Lion, any suggestions?
To add on to Corky02 answer:
The recent Aperture release AP 3.3.x is very efficient, both on Lion and Mountain Lion. But you need a decent hardware to support it. The older Macs will have problems with the storage and CPU requirements. For good performance on large raw images plenty of RAM is important, at least 4GB, but 8GB would be much better, and your library should be on a fast disk, preferably on an internal drive. And don't let the system drive get too full.
Many reports about Aperture being slow are due to putting the Aperture library onto slow disks or acessing the original image files over the network, insufficient RAM, or corrupted or ill-designedAperture databases.
Aperture excels at all kinds of image processing that can be considered image developement - raw processing and color/lighting adjustments, but does not do compositing. If you are shooting raw and want professional image developement I'd recommend to do this in Aperture and not in iPhoto - you will have much more control over this in Aperture (after a steep learning curve). You can also repair and retouch the image to correct minor blamishes. For graphics compositing and inpainting you can set up an external editor and send your images from Aperture to this external editor - any of the editors Corky recommended would be o.k. for this.
To see, if you will want the advanced image processing in Aperture or the easy to use, more basic options in iPhoro will be sufficient to you have a look at the Aperture User manual, or the tutorial on the support page: Aperture Support
But Aperture is a professional apllication, not "plug and play". You should only consider it, if you are willing to spend some time on learning to use it properly and are willing to work your way through the manual.
Regards
Léonie

Unable to install the GEAR driver set at this time.The GEARAspiWDM service used bz the GEAR driver set is scheduled to be deleted during the next system reboot.Please reboot the system and run iTunes again.help me..I understand this problem..thanks

Unable to install the GEAR driver set at this time.The GEARAspiWDM service used bz the GEAR driver set is scheduled to be deleted during the next system reboot.Please reboot the system and run iTunes again.help me..I understand this problem..thanks

Hi there, i had the exact same problem and posted a thread a few above yours, and these forums wasnt much help nobody replied, so i did a bit of research and followed all the intructions on this site: http://www.gearsoftware.com/cfknowledgebase/articledisplay.cfm?articleid=296
If you follow the steps very carefully and do as each says, this will solve your problem.. Now i am very happy i can actually install iTunes and use it for my iPod.
Remember to be carefully with the steps as the things you will be deleting are very important to your comp.
Hope this helps.
Windows XP

Scheduling of Broadcast Setting using Program

Hi,
Given Scenario is :
I have few broadcast setting on a Query. All settings are scheduled to be executed with the option " data change in infoprovider".. i.e. each time the DSO gets activated the settings would get triggered.
I have 4 process chains.
Each process chain has the Broadcaster event associated with it.
So every time the process chain runs it triggers ALL the mailers as all the settings are scheduled to run with activation of DSO.
Requirement is :
A particular no of setting should get triggered by a specific process chain. Meaning i should be able to trigger specific settings with specific process chains instead of all settings at one go.
Questions:
1. Is it possible ? if possible how?
2. Is there a program that runs at the background when the broadcast settings get triggered?
If yes, what is the program name?
3. Can we create variants of this program based on filter navigation settings and the trigger the mailers by scheduling this program variants.
Your valuable inputs will be appreciated.
Please suggest something.
Thanks & Regards
Jaya Das

Hi,
Check in the following SDN link, here you have PDF, I hope it will help for you
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00172934-f3c1-2b10-728a-c42a0fc28c61
Thanks
Reddy

I used to shoot video in my Powershot S3 IS (MVI_.AVI) and load it into iPhoto, I used quicktime pro so I could convert it for emailing to family members. That was when I was running Leopard now with Mt. Lion nothing works. Videos do not open at all?

I used to shoot video in my Powershot S3 IS (Format MVI_.AVI) and load them into iPhoto, I used quicktime pro so I could convert for emailing to family members. That was when I was running Leopard now with Mt. Lion nothing works. Videos do not open at all. Any simple suggestions, I am not real keen on iMovie Productions and not real certain how they compress for emailing attachments. Something simple here that I am missing? Thanks so much. I am a grandpa trying to share with family members far away (quickly & simply).

I am surprised that Apple did not build a converter into Mt. Lion.
Apple does have a converter built into Mountain Lion. It is call "Quicktime." However, in order to use this converter, you must first make sure the compression formats are playback compatible with QT. Basically, there are three levels of QT compatibility. The lowest is "Playback." These file can be played by QT but may not be conversion or edit compatible with QT. The second level is QT "Conversion" compatible. These files are playback compatible and can be converted to other compression formats using QT. "Edit" compatible media files are "Fully" compatible with QT since the can be played, converted and/or edited by QT. The main problem here is that AVI is a "legacy" file format that has not been officially supported by Microsoft for more than 11 years when it was replaced by Windows Media multimedia file/compression formats. Many of the original compression formats used in AVI files have never been transcoded for the Mac platform, use beyond system 9, or use beyond PPC platforms. In addition, some commonly used AVI codecs are proprietary or use non-standard (hybrid) profile and level combinations. In short, there is little wonder that Apple has been distancing itself from this outdated file type as it re-writes and upgrades its own QT structure to support more standardized, more scalable, more modern high definition file types and compression formats. It is really unfortunate that users continue to use this outmoded file type simply because it is freely available, easy to use, or they are simply too lazy to move on to a more modern or more efficient file types and/or compression formats.
I tested Wondershare Video Converter Ultimate for the Mac, which seems to be the "state of the art". I may be purchasing a new camera which might create a whole new set of variables. This program seems to cover all bases and is great for novices.
There are many third-party apps available if you wish to search for them. Many are even available in the App Store. Most do their job well and it is usually a matter of personal user preference as to which is best.
HandBrake seems more suited to folks with more experience and knowledge.
I mentioned Handbrake primarily because it is free and easy to use when you employ the included conversion presets options. (The TV options can normally be used for almost any situation depending on the source file and output requirements.) It is also excellent for more experienced users, but has a somewhat limited choice of output options as it does not access the user's system QT codec component configuration.

I am using several Macs running Yosemite. I was recently "upgraded" to Xfinity's new cable modem which can support both 2.5Ghz and 5Ghz networks at the same time. Actually I can connect to the internet over both with a satisfactory bump in speed for

I am using several Macs running Yosemite. I was recently “upgraded” to Xfinity’s new cable modem which can support both 2.5Ghz and 5Ghz networks at the same time. Actually I can connect to the internet over both with a satisfactory bump in speed for the Ghz. However when I connect to the 5Ghz the Time capsule disappears from the Airport Utility and claims to be Not Found. Is there something I have done wrong or just a Yosemite Teething Problem

First restart your mac and try again.
It could be
that the router and the TC are interfering wirelessly with each other.
You can check this by pressing the option key while clicking on the wireless icon on your screen
Open Wireless Diagnostics
enter your user password
Press CMD 4 then Scan
You will see all the wireless channels being used in your location and you can check if they are on the same channel
Make the SSID for the TC simple like MyTC
Set 5Ghz to auto
Update the TC
Try again
Ted

Why can't I use my mid 2010 macbook pro with 8GB memoir and NVIDIA GEForce GT 330M 256MB to run 3D in photoshop CC?

Why can't I use my mid 2010 macbook pro with 8GB memoir and NVIDIA GEForce GT 330M 256MB to run 3D in photoshop CC?

3-D is very memory intensive.
System requirements | Photoshop
Mac OS
Multicore Intel processor with 64-bit support
Mac OS X v10.7, v10.8, or v10.9
2 GB of RAM (8 GB recommended)
3.2 GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
1024x768 display (1280x800 recommended) with 16-bit color and 512 MB of VRAM (1 GB recommended)**
OpenGL 2.0–capable system
Internet connection and registration are necessary for required software activation, membership validation, and access to online services.*
** 3D features are disabled and some Mercury Graphics Engine enhanced features may not work with less than 512 MB VRAM. Read the Help article.
Bottom line, you don't have enough VRAM
Nancy O.

Can i set up my iPad and iPod to use iMessage between the two devices with the same Apple ID?

Can i set up my iPad and iPod to use iMessage between the two devices with the same Apple ID? SO i could iMessage if out from my iPod to my iPad at home to be viewed by a family member?

Look into using Apple Configurator. It's the easiest way to "reimage" and Manage iPads that I know of right now.
http://itunes.apple.com/us/app/apple-configurator/id434433123?mt=12
Also, look into using the Educational Volume Purchase Program, if you have not already done so.
http://www.apple.com/education/volume-purchase-program/

Using RSRD_BROADCAST_STARTER to run Broadcast setting with ALEREMOTE

Similar Messages

Maybe you are looking for