Using Save As from Applications...

I've noticed that whenever I try to save a document or file from an application with the "save as" function, I get limited choices of where to put the file. For example it might show the "documents" folder, but it will not show any of the sub folders that I have made, nor will it allow me to create a new folder below that one.
Is there some technique that I am not using to do this correctly? Forgive me, I'm a new Mac convert.
Regards,
Jason

Thank you so much! A little knowledge is a powerful thing! I appreciate your help and patience.
Regards,
Jason

Similar Messages

Error while using external service from application service

Hello All,
I have exposed webservice from a CAF project that i am importing as external service in another CAF project. Now i am using application service to directly call the external service. following is the code in my application service:
Ns6_getCountryByCode__R inp = new Ns6_getCountryByCode__R();
               inp.setNs6_countryCode(countryCode);
               try {
                      HRServicesWSVi__DocumentLocal bn = this.getHRServicesWSVi__Document();
                      Ns6_getCountryByCode__RResponse result = bn.getCountryByCode__R(inp);
                      retValue.setCountryCode(result.getNs6_Response().getNs3_countryCode());
                      retValue.setCountryName(result.getNs6_Response().getNs3_countryName());
                 }catch(Exception e){
                      throw new ServiceException(e);
I am getting the following error
ERROR. Problem in server response: [Bad Request].:
What could be the problem ? Thanks in advance
Regards,
Ashutosh Rastogi

Hello,
It's always a good idea to check the log file. In many cases you find hints what the reason for the error could be. The log file can be found here: <root>usrsap<SID>JC30j2eeclusterserver0logdefaultTrace.<xy>.trc where <root> is probably c:, SID something like F33, F41, ... and <xy> a number 0, 1, .... -> the highest number is the last and therefore most youngest log file. Please check out this file.
Another very common (but trivial) error is that you forgot to specify the URL and the end point location of your Web Service in CAF's config tool. This tutorial explains this beginning on page 20 <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/11669cea-0c01-0010-63b2-b98c35b1b370">Using a Web Service as External Service</a>.
Regards,
Jan

When closing Firefox 29, it remains active as process even if there is any open windows. So I have to use close process from Application management.

OS-Win 7 Home Edition
When I close Firefox 29 (just installed) the firefox.exe *32 process remains active and I must close it from task manager.
Otherwise when I try to run it again I get the message:
"Firefox is already running but not responding. To open a new window you must first close ...."
No such problem with previous version 28
Regards
Riccardo

For those that have the problem after the update or after changing the ''seer'' preference please set Firefox to NOT delete history at closedown
# Use new Button [[Image:New Fx Menu]] -> Preferences -> <br />|Privacy|Firefox will : [Remember History v]
# Does that help and allow you to restart ok ?
* Note
*# You should be able to open and use Private Browsing Windows ok still. You may need to close those windows before closing down Firefox though. <br />See [[Private Browsing - Browse the web without saving information about the sites you visit]]
*# This hang or close down issue is a known bug in Firefox 29 that has yet to be fixed. With luck it may be fixed in the next Firefox version. <br /> Note the known issues mentioned in <br /> http://www.mozilla.org/en-US/firefox/29.0.1/releasenotes/

Using "Save As" execCommand in IE8 to save XML file in ANSI format instead of UCS2-Little Endian

I am currently trying to save an XML data using "SaveAs" execCommand from Javascript in Internet Explorer 8 only.I am using document.write(xml) to write the xml content after i open a window.The document object in IE8 uses a saveAs Exec
Command to allow the user to save the xml file in the local folder.The XML file is generated but it doesnt set the encoding to my preferred type for a different interface where i need to send this XML which is ANSI/UTF-8 encoding.I can only save
the XML in UCS2 little Endian encoding format.Below is the code i am using.
var location = "D:\\export_to_MCT"+dateTime+".xml";
var xml = tmpSelectedConfigurationXML.transformNode(xslDoc);// XML Is generated here
alert(xml);
**var testlink = window.open ("about:blank","_blank","toolbar=no,status=no,menubar=no,scrollbars=no,resizable=no,left=10000, top=10000, width=10, height=10, visible=none");
testlink.document.write(xml); //fileData has contents for the file
testlink.document.close();
testlink.document.execCommand('SaveAs', false, location);**
testlink.close();
My purpose is to save the xml in ANSI/UTF-8 encoding without BOM format.I cant use Scripting.FileSystemObject method of ActiveX object.Please suggest

@panda Boy--
But my intention isnt that .I need to download the xml in ANSI format

Why can't a new folder be created within my user home directory when using 'Save As' in Mountain Lion?

Hi,
So I want to create a new folder within my main user home directory (not the root directory) just for my developer-related files? I can do this from Finder, although it does prompt me for my password to do so. However, when using 'Save As' from any app, the 'New Folder' button is greyed out when I select my user home directory. So I have to create the folder in Finder then Save As.
Is this normal behavior? Is OSX discouraging me from adding things to my user home directory by making it less convenient? Is there a good reason it would be discouraging me from creating new folders there? If not, is there a setting that I can change to allow the creation of new folders from the Save As prompt?
Thanks for your help,
B

You may need to rebuild permissions on your user account. To do this,boot to your Recovery partition (holding down the Command and R keys while booting) and open Terminal from the Utilities menu. In Terminal, type: ‘resetpassword’ (without the ’s), hit return, and select the admin user. You are not going to reset your password. Click on the icon for your Macs hard drive at the top. From the drop down below it select the user account which is having issues. At the bottom of the window, you'll see an area labeled Restore Home Directory Permissions and ACLs. Click the reset button there. The process takes a few minutes. When complete, restart.
Repair User Permissions

FAQ: Creating PDF Files from FrameMaker v.6 & earlier Documents -- Why you should not use "save as PDF"! -- Windows & MacOS Only!

An issue that has come up over and over again on several FrameMaker and Acrobat/PDF email lists as well on the corresponding Adobe User-to-User forums is that of creation of PDF files. FrameMaker 5.5.6 and 6 have what looks like a convenient feature that is supposed to allow you to create PDF files via simply saving the document as a PDF file. I have gone on record as advising end-users not to use this approach for reliable creation of PDF files from FrameMaker documents under Windows and MacOS with FrameMaker 6 and earlier. Why do I most vociferously offer this advice and why doesn't the problem get fixed? And how SHOULD you create PDF files from FrameMaker?
GOOD NEWS
I will start with the good news. The "next major version" of FrameMaker will indeed have "save as PDF" re-implemented in a manner that it will be as reliable as printing to the "Acrobat Distiller" printer instance under Windows or the "Create Adobe PDF" desktop printer under MacOS. I am personally working with the FrameMaker development organization to make sure this really happens and is fully and properly tested and debugged! Furthermore, this next major revision of FrameMaker, unlike FrameMaker 6, will come with a Distiller installer that will properly install the "Acrobat Distiller" printer instance under Windows and the "Create Adobe PDF" desktop printer on the Macintosh (of course assuring that the latest PostScript driver is also automatically and correctly installed).
DON'T USE "SAVE AS PDF"
But what's wrong with "save as PDF" as currently implemented?
The following are some of the SYMPTOMS reported over the last few years by FrameMaker users that were traced back to use of "save as PDF" under FrameMaker:
(1) No PDF file is produced at all, possibly with a log file showing not-readily apparent PostScript errors during distillation.
(2) The PDF file "loses" color in images. All or some images (raster, bitmap images, NOT vector artwork) appear in the PDF file in grayscale.
(3) The resultant PDF file is on the wrong paper size, i.e., the document's logical page size does not match the output page size as seen in Acrobat or Acrobat Reader.
(4) Some or all text in the resultant PDF file is blotchy looking or overly bold.
(5) Some or all text in the resultant PDF file cannot be searched or indexed.
(6) Some or all text in the resultant PDF file appears in Courier or in some other substitution font.
(7) Interword or intercharacter spacing is a bit irregular in the resultant PDF file.
(8) Content is missing in the margin areas of the page, i.e. you cannot do full-page bleeds.
(9) Some or all page content is missing (other than margin areas).
(10) Relatively inefficient PDF is generated.
If this list by itself isn't enough for you, please note that some of these symptoms are very subtle and may escape attention when the PDF is first viewed or printed. Oftimes, it is when one attempts to manipulate the PDF file in Acrobat or repurpose its content or even view or print on a system other than the one on which the PDF file was created, that some of these symptoms make themselves obnoxiously visible (or invisible in some cases I won't make any bad jokes here about graphic examples!).
It is important to understand that FrameMaker does NOT have its own native ability to create PDF. Any and all PDF created from FrameMaker documents is actually done by creating PostScript via the PostScript driver and having the Acrobat Distiller create PDF from that PostScript. The only exception to this is creation of PDF via the Acrobat PDFWriter driver, which is likewise not recommended (see below).
In order for "save as PDF" to work correctly, FrameMaker must do the equivalent of calling Printer Setup and selecting the "Acrobat Distiller" printer instance under Windows or the "Create Adobe PDF" desktop printer under MacOS followed by setting the driver's options correctly for paper size, page range, etc., followed by sending the proper commands to the driver to create PostScript.
Contrary to popular belief, PostScript as generated by the Windows and MacOS PostScript drivers is VERY device-dependent. The information in the PPD file associated with a printer driver instance provides critical parameters for generation of PostScript including:
Whether the printer supports color (Acrobat Distiller does)
What PostScript language level is supported (Acrobat Distiller 4.x and Acrobat Distiller 5.x are both PostScript language level 3)
Whether native TrueType support is available (Acrobat supports native TrueType as Type 42 fonts)
Available binary communications (Acrobat Distiller supports pure binary and ASCII, but NOT TCP, TBCP, or PJL)
Resident fonts (Acrobat Distiller doesn't really have resident fonts)
Available paper sizes and custom paper size availability (Acrobat Distiller supports a wide range of predefined sizes and continually variable "custom" sizes up to 200" by 200")
Margins / printable areas (for PDF and the Acrobat Distiller, there are no margins in which imaging is not permitted)
Device resolution (Acrobat Distiller can be set to any value from 72 to 4000 dpi; as a convenience, the Acrobat Distiller PPD provides a series of values for use by the driver. Since there is no inherent "resolution" of a PDF file, this parameter is used only for purposes of allowing PostScript programs that query for such a value to be satisfied and for the driver to be able to communicate this value to the operating system and/or application as required.)
Paper handling (totally irrelevant to Acrobat Distiller if input or output tray selection via "setpagedevice" is found in the PostScript stream, it is ignored by Acrobat Distiller)
Thus, if the wrong printer driver instance is selected (i.e., it isn't associated with the Acrobat Distiller PPD file) or that driver instance is improperly configured, improper PostScript will result and one or more of the symptoms described above can occur. As currently implemented, FrameMaker depending upon version will not necessarily choose the correct printer driver instance and/or correctly parameterize the print job via driver setup options. In fact, FrameMaker 5,5,6 might even try to generate PDF via calling a PCL driver, FAX driver, or even a non-PostScript inkjet printer!
DON'T USE PDFWRITER
The Acrobat PDFWriter is a relic of older versions of Acrobat. In fact, it is no longer installed by default in the "easy install" or the "typical install" of Acrobat 5. It hasn't really be updated since Acrobat 3 and only supports PDF 1.2. It is a GDI (Windows) / QuickDraw (MacOS) driver that directly generates PDF without any intermediary PostScript. Since it is not a PostScript printer driver, applications cannot pass through EPS graphics and/or PDFMark information (used for a wide variety of purposes by FrameMaker). For EPS graphics, most applications will send the low resolution TIFF (or PICT) EPS header in lieu of the PostScript text, if they send anything at all, to the driver. Forget about links, structure, or any other PDF "goodies." Expect that PDFWriter will fully "bite the dust" in the next major version of Acrobat.
SO HOW DO I GENERATE PDF FILES FROM FRAMEMAKER 6 & EARLIER?
The ONLY method that is really reliable for producing PDF files with FrameMaker 6 and earlier requires the generation of PostScript via a properly set printer driver instance associated with the Acrobat Distiller PPD and distillation of the resultant PostScript by Acrobat Distiller.
Case 1: FrameMaker and the Full Acrobat 4.05 or Acrobat 5.0x Products
PDF file from a "chapter" -- print directly to the Acrobat Distiller printer instance (Windows) or the Create Adobe PDF desktop printer (MacOS) already installed by Acrobat. If you check the "Acrobat data" option, then make sure to UNcheck the "print to file" option that gets set at the same time. As a result, the driver will automatically send the generated PostScript to the Distiller for you and delete the intermediate PostScript when done.
PDF file from a "book" -- print directly to the Acrobat Distiller printer instance with the "print to file" option checked (Windows) or the Virtual Printer desktop printer (MacOS) associated with the Distiller PPD (see details below under Case 2/MacOS). You will need to manually process the resultant PostScript file through the Distiller (or use a "watched folder" arrangement).
In both the above sub-cases, the default driver options generally will be OK, but check on paper size and communication protocol (Use pure binary, not ASCII, for optimal performance AND no CTRL-D characters under Windows. Make sure to set Level 3 only and Binary under MacOS. Font inclusion "All" for Acrobat 4.05 and "None" for Acrobat 5 under MacOS.). With Acrobat 4.05, make sure you preset the Distiller to use the joboptions you want. With Acrobat 5, you can set this on a job-by-job basis via the driver printer setup interface (or print dialog on MacOS).
Case 2: FrameMaker 6 and the Bundled Acrobat 4.05 Distiller
Windows -- Create a new printer driver instance using the latest version of the Adobe Universal PostScript Driver Installer, downloadable from Adobe's web site AND the Acrobat Distiller PPD file (located in the XTRAS subdirectory of the Distiller directory). This driver instance should be set to print to the local port named "FILE:". Name this driver instance as "Acrobat Distiller". The default driver options generally will be OK, but check on paper size and communication protocol (use pure binary, not ASCII, for optimal performance AND no CTRL-D characters). Make sure you preset the Distiller to use the joboptions you want. Print directly to this Acrobat Distiller printer instance. Make sure that the "print to file" option is checked. You will need to manually process the resultant PostScript file through the Distiller (or use a "watched folder" arrangement).
MacOS -- Install the latest version of AdobePS 8.7.x, downloadable from Adobe's web site. In FrameMaker, go to Page Setup and select the "Virtual Printer" and go to the "Virtual Printer" window pane. Select the Acrobat Distiller PPD file (located in the XTRAS subfolder of the Distiller folder). Print directly to the "Virtual Printer" (Make sure to set Level 3 only, Binary, and font inclusion "All".). Make sure you preset the Distiller to use the joboptions you want. You will need to manually process the resultant PostScript file through the Distiller (or use a "watched folder" arrangement).
Case 3: Acrobat 3
Acrobat 3 is not officially supported for the latest OS versions and I personally would no longer recommend its use for generation of PDF files given that Acrobat 5.0.5 is the current version of Acrobat.
- Dov

You're asking a lot of ancient Acrobat to work with an Office that never existed when it was made. "Just updated my office suite" is a massive change, and Window 8 didn't exist at that time either...

I have tried to download 5.0.1 on MAC X 10.6.8. Clicking download, I get a question from MAC --save or name application to open. Saving to desktop doesn't work. It appears in download, but not in desktop. What now? in English

# Question
I have tried to download 5.0.1 on MAC X 10.6.8. Clicking download, I get a question from MAC --save or name application to open. Saving to desktop doesn't work. It appears in download, but not in desktop. What now?

On Mac OS, plugins are installed to a common location, usually ''' /Library/Internet Plugins''' for system-wide availability or to '''~/Library/Internet Plugins''' for a specific user. Ref: http://kb.mozillazine.org/Issues_related_to_plugins#Background
Does Java 1.6.0_31 work on Safari or another browser?
I also found the following, in case it helps:
*http://reviews.cnet.com/8301-13727_7-57414869-263/how-to-use-java-applets-in-os-x-after-java-2012-003-update/
*http://stackoverflow.com/questions/6411909/how-to-downgrade-jre-jdk-on-mac-osx

Use of Open and close data set in to pick up files from application server

Hi,
As per my earlier posts i m making a programm which will pick excel sheet from application server and make auto PR by bapi and this all process will be handle by background processing (SM36, SM37). My concer is all proces are working fine but my files are not been picked by application server , when run on my own machine everything is working fine.I never used OPENDATA SET command before , so i have no idea how it will be used , can anyone provide me details with my set of codes where it should be used ....
sou_dir_name = 'Y:\Sucess\'.
tar_dir_name = 'Y:\destination\'.
Open dataset sou_dir_name for input in text mode encoding default.
if sy-subrc eq 0.
   do.
       read dataset sou_dir_name into file_table.
   if sy-subrc ne 0.
     exit. " end of file.
enddo.
endif.
CALL FUNCTION 'TMP_GUI_DIRECTORY_LIST_FILES'
EXPORTING
    DIRECTORY = sou_dir_name
    FILTER     = '.'
IMPORTING
    FILE_COUNT = file_count
    DIR_COUNT = dir_count
TABLES
    FILE_TABLE = file_table
    DIR_TABLE = dir_table
EXCEPTIONS
    CNTL_ERROR = 1
    OTHERS     = 2.
IF SY-SUBRC <> 0.
ENDIF.
loop at file_table into wa_file_table.
clear : strr , str1 , str2 , str3 .
strr = wa_file_table-PATHNAME .
concatenate sou_dir_name strr into str1 .
concatenate tar_dir_name strr into str2 . " success
concatenate tar_dir_name1 strr into str3 .         " failed
FILE = STR1 .
*start-of-selection.
*& Function For Retrieve Data From Excel
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
    filename                      = FILE
    i_begin_col                   = col_start
    i_begin_row                   = row_start
    i_end_col                     = col_end
    i_end_row                     = row_end
tables
    intern                        = excel_bdcdata
EXCEPTIONS
   INCONSISTENT_PARAMETERS       = 1
   UPLOAD_OLE                    = 2
   OTHERS                        = 3.
IF sy-subrc NE 0.
WRITE : / 'File Error'.
EXIT.
ENDIF.
loop at excel_bdcdata.
    translate excel_bdcdata to upper case .
    move excel_bdcdata-col to it_index.
    assign component it_index of structure wa_file to <fs> .
    move excel_bdcdata-value to <fs>.
    at end of row.
      append wa_file to it_file .
        clear wa_file.
      endat.
endloop.

Parsing XML data:
http://help.sap.com/saphelp_nw04/helpdata/en/86/8280ba12d511d5991b00508b6b8b11/frameset.htm
or alternatively check out ABAP online help for "CALL TRANSFORMATION".
For creating the material master look at BAPI_STANDARDMATERIAL_CREATE.
Thomas

Dreamweaver CS6 cloud - I can no longer use "Save As' and the Application manager won't open.

I always open an old page and use "save all" to save it, then "save as" and change the name of the page to what I want the new page to be the rewrite the new content. It doesn't open a box for name change any longer. Also The application manager does not open at all.
What to do to fix this?
Roger

Hi Roger,
Can you close other applications open on your computer, and retry before the experts here suggest other solutions?
Thanks,
Preran

Can I use my time capsule to back up or save files from my pc?

My time capsule works great with my 2 Macs. I just got a PC and would like to know if I can use the time capsule to back up or save files from my PC?

You can.. but obviously PC is missing TM.. so you will need to use a backup software.
Saving files to the TC is not really recommended.. but as long as you have lots of space is unlikely to cause problems.. the whole idea of TM though is to keep incremental backups on an hourly basis and will slowly fill the TC.. once space is short.. it can get messy.
Also read Pondini who is positively against using it for other files.
http://pondini.org/TM/TCQ3.html
I suggest you read .. skim at least the FAQ so you actually understand what TM - TC is all about.
A USB drive plugged into the PC makes a better backup
1. It is formatted NTFS, ie native format and readable by any windows computer. A TC is a network device.
2. USB drives are cheap. You can use 2 of them and store one offsite.
3. USB traffic is not on the network.
4. Storing files on the TC is bad as it is a backup target not itself backed up.
5. In a pc you can add drive after drive after drive.. (assuming a desktop since you didn't say laptop). Only a Mac Pro can do that in the Mac world.. internal drives are cheaper than a. USB drives, b. network drives. And they are 10x or more faster.

Is there a way to get the screen saver on user "a" to use iphoto pictures from user "b"?

Is there a way to have the iphoto screen saver use the photos from a different iphoto user? My husband leaves his account open and he has only old photos when the screen saver kicks in. I would like to have my photos be able to pop up on his screen saver. I need to find them in the system preferences screen saver place, but have it access my iphotos and not only his. How? Also, I would like a better system on organizing my photos.. I have them all in events by year and it is difficult of often find favorite specfic photos. Thank you. Melody

In short, no. The whole point of different accounts is to keep your data separate from his, and your photos are your data.
You could share a library? It can be a bit complex.
You can use Fast-User switching to switch over to your account - takes a couple of seconds
As to organising your Photos - iPhoto is a database and offers pretty much unlimited options for organising your pics, but it takes a bit of work to go beyond the basic and automatic.
If you take the time to assign Places then you cn see all the photos in your Library based on where they were taken. (Of course, that's of limited use if they're all taken in your backyard ) Faces means you can sort the Library based on who's in the Photos.
Beyond that, simple thigns like naming the Events will help - Xmas 11, Bobby's Wedding, Rome 2009 and so on. You can then search on those basic words in the search box.
After that: Keywording. The following is a canned answer I use to describe my system. It may spark some ideas for you.
I use Events simply as big buckets of Photos: Spring 08, July - Nov 06 are typical Events in my Library. I use keywords and Smart Albums extensively. I title the pics broadly.
I keyword on a
Who
What
Where basis (The When is in the photos's Exif metadata). I also rate the pics on a 1 - 5 star basis.
Using this system I can find pretty much find any pic in my 40k library in a couple of seconds.
So, for example, I have a batch of pics titled 'Seattle 08' and a typical keywording might include: John, Anne, Landscape, mountain, trees, snow. With a rating included it's so very easy to find the best pics we took at Mount Rainier.
File -> New Smart Album
set it to 'All"
title contains Seattle
keyword is mountain
keyword is snow
rating is 5 stars
Or, want a chronological album of John from birth to today?
New Smart Album
Keyword is John
Set the View options to Sort By Date Ascending
Want only the best pics?
add Rating is greater than 4 stars
The best thing about this system is that it's dynamic. If I add 50 more pics of John to the Library tomorrow, as I keyword and rate them they are added to the Smart Album.
In the end, organisation is about finding the pics. The point is to make locating that pic or batch of pics findable fast. This system works for me.

PL/SQL from Application Module instead of Using VO/EO - Violating Standard?

Hi,
I have seen product code which Use PL/SQL APIs for committing data (Creation of Records in Table) from Application Module. There is no BC4J (VO/EO) used in this data route.
Is there any coding standard (document) which says such cases are against Standards.I know there is one Standard saying PL/SQL Based VO is dicouraged in Oracle Apps.
Thanks
Joseph

Vikram,
Performance depends on the way you are going to make use of pl/sql code. Suppose if you are using pl/sql just for final insert/update with other validations bound to it through a single call, that's fine. But in case you have other multiple calls to pl/sql blocks also for fetching data for display purpose, that's where standard VO's will be more efficient reducing the number of trip for pl/sql calls. So use it only when it is the last way and you need to handle multiple validations with complex data structure.
As for locking, yes, you might have to take care of locking handling scenario if such a situation happens. But again it depends on what's your business logic and how is your data being processed.
--Shiv

How stop PS6 from removing the DPI value from an image when using "save for the web"?

How stop PS6 from removing the DPI-value from an image when using "save for the web"?
Example:
- Open a tif image, that contains a dpi value (resolution).
- Use the splice tool in PS6.
- Export the slices with "Save for web", as gif-files.
Then the dpi value is removed, the gif files has no dpi value (it's empty).
How can we stop PS6 from removing the dpi value when using "save for web"?
OR:
When using the slice tool, how can we save the sliced pieces without PS removing the dpi value?

you can make your art go a little bit over the bounds. or you can make sure your artboart and art edges align to pixels

I have recently used iTunes to subscribe to some Podcasts flawlessly. Then suddenly, I could see the latest Podcasts in iTunes, but they were no longer available on my 160GB Classic. All other functions appear ok. Can anyone out there save me from myself

Help ! I have recently used iTunes to subscribe to some Podcasts flawlessly. Then suddenly, I could only view the latest downloaded Podcasts in my iTunes account. I no longer had any Podcasts on my 160GB Classic. Can anyone save me from me ? I would truely appreciate any suggestions or direction. Thank you. [email protected]

Connect your iPod to iTunes and check on the Device/Podcasts pane; there are several options for which Podcasts are "kept on/left on" the iPod at each Sync. Are they set the way you want? For instance, if the setting is "to keep on the iPod only new Podcasts", that would cause older Podcasts to be removed.
If you need to chnage the setting, you will need to Sync the iPod afterwards for the change to take effect.

How can you change data on a SQL 2012 application database that uses availability groups from BizTalk server?

If you use the WCF-SQL adapter it is recommend that you set UseAmbientTransaction to true if you are changing data. I think this requires MSDTC to be enabled on the SQL server that you are changing the data on. (http://msdn.microsoft.com/en-us/library/dd787981.aspx)
I think that Availability groups does not support MSDTC. (http://msdn.microsoft.com/en-us/library/ms366279.aspx).
How can you change data on a SQL 2012 application database that uses availability groups from BizTalk server?

Hi,
Yes, Availability groups doesn't support MSDTC. Please refer to the similar discusison which maybe helpfull:
http://dba.stackexchange.com/questions/47108/alwayson-ag-dtc-with-failover
http://stackoverflow.com/questions/17179221/msdtc-in-always-on-availability-groups

Using Save As from Applications...

Similar Messages

Maybe you are looking for