Using scale mode with fscommand full screen

Im using the following code and although i want it to be a
full screen movie i dont want the content to scale with the screen,
is there a way of stopping this?
var scaleMode_cb:mx.controls.ComboBox;
scaleMode_cb.dataProvider = ["noBorder"];
var cbListener:Object = new Object();
cbListener.change = function(evt:Object) {
var scaleMode_str:String = evt.target.selectedItem;
Stage.scaleMode = scaleMode_str;
scaleMode_cb.addEventListener("change", cbListener);
fscommand("fullscreen", "true");

Not sure what you're talking about...  It works just the way I expect it to work on my PC.
What you say makes a lot of sense though.  Integration with system features is a Good Thing.
I do wish Windows would provide a text vocalization tool; I have had to install a very old one.  Say hi to (the voice of) Siri for me.
You can request new features here:
http://feedback.photoshop.com/photoshop_family
-Noel

Similar Messages

  • Remote desktop full screen mode not going full screen

    Hi,
    Running Windows 7 RTM x64 on both my PC at home and my workstation at work.
    My PC at home has a square monitor and my work PC has a widescreen monitor.
    I used webapps (citrix) from home to get into work environment then remoted to my workstation.
    Since doing that, when I am physically at the workstation (at work), I can no longer remote desktop to servers in full screen mode.  Instead, it does a smaller window with "full screen settings".  Basically the full screen remote desktop is about 3/4 size of the monitor, not 100%.
    Any help appreciated.
    -thanks

    I  have this problem too ... On Windows 7. 
    Dell XPS14 laptop ... No Pause Key ... No Break Key... (ctrl +alt + fn + F12) doesn't work.
    The thing that bugs me most is ..... What's
    changed and WHY?
    I've been using remote desktop for years and maximizing always used to send it to full screen.
    Now suddenly I can't go to full screen without exiting and resetting the screen size with the slide bar in the options!
    WHY
    Seems this has been broken in Windows 7. It still works fine as it used to on my old M65 running Vista.
    Why has
    this been broken in Windows 7? How come no one at MS noticed?
    The marked answer is not acceptable. Sure it works when you initially open the connection but if
    you minimize or restore the window the problem comes back as before.
    Hi, I'm on a Dell Inspiron N5010 and for me, the winning combination was Ctrl-Alt-Fn-F6. Toggles full screen and windowed screen.

  • With a full screen application open, if you then open and close LaunchPad, the dock will not go away!

    This is especially annoying if you have hot corners for LaunchPad and accidentally open it with a full screen app open, because the Dock will not leave!  Try it: open any app in full screen, open LaunchPad with a gesture or hot corner, exit out of LaunchPad and the Dock will be at the bottom of the full-screen app, obscuring the bottow 10% or so of the screen.  Any fixes, or something to come on Apple's end?

    below is what I get with the dev.jeffersonscher.com etc. url. But what do I do with this information? I can launch safe mode, but I still get only the 2" icon/window of Firefox.
    JavaScript Browser Tests
    navigator object properties
    navigator.userAgent = Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C)
    navigator.appName = Microsoft Internet Explorer
    navigator.appCodeName = Mozilla
    navigator.appVersion = 5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C)
    navigator.platform = Win32
    DOM methods/collections
    if(document.getElementById) = true
    if(document.layers) = false
    if(document.all) = true
    window properties
    if(top.window.moveTo) = true
    if(top.window.moveTo(0,0)) =
    The following data is reported by a server running Microsoft IIS server and ASP:
    View selected http headers at <a href="svrvars.asp">svrvars.asp</a>

  • Since loading Lion, I've experienced much more instability than Snow Leopard. In particular, Mail crashes with regularity, full-screen apps seem to run slower and show the beach ball more often for longer, etc.  I'm disappointed with the performance. Any

    Since loading Lion, I've experienced much more instability than Snow Leopard. In particular, Mail crashes with regularity, full-screen apps seem to run slower and show the beach ball more often for longer, etc. I love the features, but I'm disappointed with the performance. Any help coming from Apple?  I've been sending them so many reports after crashes, that their file must be full!

    Summoning max. courage, I did what you advised. Here is the result. What does this tell you? My Lion 7.2 (mid 2011 iMac) has several annoying glitches (which I have so far tolerated through gritted teeth) but none that have actually stopped me working.
    BTW, I see several items involving CleanMyMac which I did not know I had. It is generally villified as a trouble-maker. Spotlight can't find an app. or a utility of that name. How can I get rid of what's there please? Just delete?
    Last login: Thu Nov  3 20:55:11 on console
    Steve-Kirkbys-iMac:~ stevekirkby$ kextstat -kl | awk ' !/apple/ { print $6 $7 } '
    com.AmbrosiaSW.AudioSupport(4.0)
    Steve-Kirkbys-iMac:~ stevekirkby$ sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
    Password:
    com.openssh.sshd
    com.stclairsoft.DefaultFolderXAgent
    com.microsoft.office.licensing.helper
    com.bombich.ccc.scheduledtask.067493DB-2728-4DF3-87D8-092EF69086E8
    com.bombich.ccc
    com.adobe.SwitchBoard
    Steve-Kirkbys-iMac:~ stevekirkby$ launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
    com.sony.PMBPortable.AutoRun
    uk.co.markallan.clamxav.freshclam
    com.veoh.webplayer.startup
    com.macpaw.CleanMyMac.volumeWatcher
    com.macpaw.CleanMyMac.trashSizeWatcher
    com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae
    com.adobe.AAM.Scheduler-1.0
    Steve-Kirkbys-iMac:~ stevekirkby$ ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Sta}* 2> /dev/null
    /Library/Components:
    /Library/Extensions:
    /Library/Frameworks:
    AEProfiling.framework
    AERegistration.framework
    ApplicationEnhancer.framework
    AudioMixEngine.framework
    FxPlug.framework
    NyxAudioAnalysis.framework
    PluginManager.framework
    ProFX.framework
    ProMetadataSupport.framework
    TSLicense.framework
    iLifeFaceRecognition.framework
    iLifeKit.framework
    iLifePageLayout.framework
    iLifeSQLAccess.framework
    iLifeSlideshow.framework
    /Library/Input Methods:
    /Library/Internet Plug-Ins:
    AdobePDFViewer.plugin
    EPPEX Plugin.plugin
    Flash Player.plugin
    Flip4Mac WMV Plugin.plugin
    JavaAppletPlugin.plugin
    Quartz Composer.webplugin
    QuickTime Plugin.plugin
    SharePointBrowserPlugin.plugin
    SharePointWebKitPlugin.webplugin
    Silverlight.plugin
    flashplayer.xpt
    iPhotoPhotocast.plugin
    nsIQTScriptablePlugin.xpt
    /Library/LaunchAgents:
    com.adobe.AAM.Updater-1.0.plist
    com.sony.PMBPortable.AutoRun.plist
    /Library/LaunchDaemons:
    com.adobe.SwitchBoard.plist
    com.apple.remotepairtool.plist
    com.bombich.ccc.plist
    com.bombich.ccc.scheduledtask.067493DB-2728-4DF3-87D8-092EF69086E8.plist
    com.microsoft.office.licensing.helper.plist
    com.stclairsoft.DefaultFolderXAgent.plist
    /Library/PreferencePanes:
    .DS_Store
    Application Enhancer.prefPane
    Default Folder X.prefPane
    DejaVu.prefPane
    Flash Player.prefPane
    Flip4Mac WMV.prefPane
    /Library/PrivilegedHelperTools:
    com.bombich.ccc
    com.microsoft.office.licensing.helper
    com.stclairsoft.DefaultFolderXAgent
    /Library/QuickLook:
    iWork.qlgenerator
    /Library/QuickTime:
    AppleIntermediateCodec.component
    AppleMPEG2Codec.component
    DesktopVideoOut.component
    DivX 6 Decoder.component
    FCP Uncompressed 422.component
    Flip4Mac WMV Advanced.component
    Flip4Mac WMV Export.component
    Flip4Mac WMV Import.component
    LiveType.component
    /Library/ScriptingAdditions:
    .DS_Store
    Adobe Unit Types.osax
    Default Folder X Addition.osax
    /Library/StartupItems:
    Library/Address Book Plug-Ins:
    Library/Frameworks:
    EWSMac.framework
    Library/Input Methods:
    .localized
    Library/Internet Plug-Ins:
    Library/LaunchAgents:
    com.adobe.AAM.Updater-1.0.plist
    com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
    com.macpaw.CleanMyMac.trashSizeWatcher.plist
    com.macpaw.CleanMyMac.volumeWatcher.plist
    com.veoh.webplayer.startup.plist
    uk.co.markallan.clamxav.freshclam.plist
    Library/PreferencePanes:
    .DS_Store
    Perian.prefPane
    WindowShade X.prefPane
    Library/QuickTime:
    AC3MovieImport.component
    Perian.component
    Library/ScriptingAdditions:
    Steve-Kirkbys-iMac:~ stevekirkby$

  • I have adobe acrobat 11 reader writer I want to use the pointer symbol on full screen instead of the hand, iwas able to do it on adobe 10 also when in full screen i can't open attachments unless i right click and open it then it boots me out of full scree

    I have adobe acrobat 11 reader writer I want to use the pointer symbol on full screen instead of the hand, iwas able to do it on adobe 10 also when in full screen i can't open attachments unless i right click and open it then it boots me out of full screen is there any way i can click on the attacment without going out of full screen

    I don't know why the change, but the pointer appears in the same way as it does on the main screen, not a pointer. There does not appear to be anyway to change it. You may want to submit a comment to the Features Requests: Acrobat Feature Requests. I also submitted this as a bug.
    As a clarification, your "adobe acrobat 11 reader writer" is not informative. There is Acrobat 11 and Reader 11. Writer is not a product as such. So you have referred to Acrobat in a contradictory manner. In the future, please just indicate Acrobat 11 or Adobe Acrobat 11.

  • Whenever I switch on my iPad Air , I am presented with a full screen of a blue sky, white clouds and stars, which I cannot get out of.  How do I do so?

    Whenever I switch on my iPad Air, I am presented with a full screen piture of a blue sky, stars and white clouds, which I cannot get out of.  How do I do so, please? 

    Sorry, please ignore this question.  I have just realised that the answer is the same as the one I recieved to a previous similar one.

  • Possible to use inline mode with Port Channel

    Hi,
    Just wondering if anyone has used inline mode with Port Channel configuration placing WAE device between router and switch. Any tips or gotcahs to be concerned about. We currently have inline mode running at this location but site would want redudancy built in through port channel.
    kind regards,
    Nigel

    Hi Nigel,
    This is not supported :
    Taken from here :
    http://www.cisco.com/c/en/us/td/docs/app_ntwk_services/waas/waas/v531/command/reference/cmdr/glob_cfg.html#wp1532575
    Best regards
    Finn Poulsen

  • Issue with Aperture full screen mode on HD 5870

    I have a very strange problem with Aperture, which may be linked to the HD 5870 and it's probably faulty drivers and would be very grateful if somebody with the same hardware could try this out if he/she can replicate this behavior:
    I have a brand new 6-core with the 5870 optional card using a dual display setup (ACD 23" and NEC PA241W).
    Whenever I enter full screen mode and activate the brushes, the image on the full screen monitor is reduced in size to about 70% of the full screen resolution. This also gets triggered, when I use the HUD display ("H" key) and lock the floating window on the browser display.
    It's a bit hard to describe, but anybody with the same or similar setup, please try this:
    - enter full screen mode in Aperture by hitting "F"
    - press "H" and lock the window using the small slider in the upper right corner
    - activate any of the quick brushes, like dodge or burn
    Is your image, which is displayed full screen on the main monitor, getting smaller in size or is it starting to flicker a bit, getting darker? If yes, we have a universal bug here.
    I could narrow the problem down in a sense, that it does not matter if either screen is hooked up using the DVI or the Mini-Display-Port. It also happens when I switch the main screen over to the other, so it's (fortunately) not a problem of my new NEC display, the ACD shows the same behavior.
    My best guess right now is some kind of bug in Aperture combined with a faulty driver of the HD 5870.
    Any help here is greatly appreciated.

    People have said that Aperture library benefits from, and should not be, on the boot drive, and placing on SSD or alternate drive, maybe RAID 0 in some cases.
    64-bit kernel mode helps overcome some of the limitations and obstacles when working with large data sets, which is why I always kept data off the system and placed on RAID 0 which does improve system responsiveness.
    If you have already done that and taken steps to optimize your storage layout hard to imagine it is a graphic driver.
    And I would limit removing caches to just Aperture's own, though can't hurt to clean out the system's, that is something that SuperDuper will do if you use it, as it doesn't copy those and just skips caches and temp files best rebuilt (but does not touch user caches).
    And a touch of Disk Warrior just for good preventative maintenance measure of course.

  • What's with Aperture full screen mode and Books?

    That is, what the heck Apple, why no full screen book layout?  I've used Lightroom from its beginning, and I'm quite happy with if for what it does, which of course doesn't include books.  I first tried iPhoto, which has really nice full screen book layout, but is crippled by limitations for customization.  It's just too restrictive for what I'd like to do.  So I downloaded a trial copy of Aperture.  I found that it has has all of the customization I need, but the UI is not very good, and the lack of full screen results in lots of wated screen space.
    Just venting.

    I agree, but tell Apple about it: Aperture Feedback:
    http://www.apple.com/feedback/aperture.html

  • Why can't I launch another app using a URL scheme in a web clip set up through Configurator with the "full screen app" option selected?

    My company uses web clips on iOS devices, set up through profiles on Configurator, for EVERYTHING. Most of these web clips have a transfer function on the site that allows the user to bring up other apps, like directions to a destination in Google Maps for instance (a URL scheme.) If the option for the web clip to appear as a "full screen app" is selected in Configurator (or iPhone Configuration Utility), this fuction does not work on devices that are running iOS 7. It is imparative to our company that the web clips be full page so there is no address bar, back button, etc. for the users to access. With this feature not working, I have 50+ iOS devices that are usless to us.
    iOS 6 Device --> Configurator 1.3 --> Full Screen Web Clip --> WORKS
    iOS 6 Device --> Configurator 1.4 --> Full Screen Web Clip --> WORKS
    iOS 6 Device --> iPhone Configuration Utility --> Full Screen Web Clip --> WORKS
    iOS 7 Device --> Configurator 1.3 --> Full Screen Web Clip -->  DOESN'T WORK
    iOS 7 Device --> Configurator 1.4 --> Full Screen Web Clip --> DOESN'T WORK
    iOS 7 Device --> iPhone Configuration Utility --> Full Screen Web Clip --> DOESN'T WORK
    iOS 7 Device --> Configurator 1.3 --> NOT Full Screen Web Clip -->  WORKS
    iOS 7 Device --> Configurator 1.4 --> NOT Full Screen Web Clip--> WORKS
    iOS 7 Device --> iPhone Configuration Utility --> NOT Full Screen Web Clip --> WORKS
    Somebody, please help!

    Phil,    I have been trying to figure out a solution to this problem since iOS 7 came out. In hindsight, I should have downloaded the beta versions of the iOS so I would have had even more time. I have talked with quite a few different developers and up until today it was a consensus that this was a "feature" of iOS in an attempt by Apple to diminish the use of webapps. Now most of these people wouldn't be considered apple apologists by any stretch, which could have contributed to their pessimism.    That being said, today I finally received some news that could give us a glimmer of hope. I spent almost 2 hours on the phone today being sent "up the ladder" until I think I found the right person to help (I'm not complaining; I was surprised at how competent and helpful each person that I spoke with was, and I didn't have to explain the situation over and over again.) I think what took so long finding the right person to speak with was that this isn't an issue that any type of troubleshooting would fix. It's not an iPad, iPhone, or even an Apple Configurator issue; it's actually a bug in iOS 7.    Anyways, the senior engineer that I spoke with reassured me, very adamantly, that this was not a feature of the new operating system and most definitely a bug. He said that they take webapps very seriously and are actually looking for ways to improve how webapps work on iOS devices and how they are used with Mobile Device Management software, like Configurator.    I was a little concerned that he said this was the first he or anyone on his team has heard about this problem, but he did work extensively with me today and said that it looks to be a major issue, and something that he and his team are going to try to figure out as soon as possible. He said he would be calling me by Tuesday with information on how and when this will be fixed.     Jon

  • How can I view movies in iPad with the full screen?

    Ok, I bought two movies from iTunes on my iMac and synced them with my iPad. It went well.
    But when I play them back on the iPad, I can only view them in letterbox/portrait mode which uses only one third of the iPad screen!!! Why is this? Is there anyway I can actually utilise the other two thirds of the iPad screen to view the movie? Otherwise it kind of defeats the object of having an iPad surely?
    FevLad

    Hi,
    I think we are going to experience some format problems on our mobile devices,  unfortunate as that may be.
    This is caused, I think, by the video and cable providers preparing to roll out live programming through LTE
    broadband from the cell towers to multiple mobile devices and home television.  We should expect some
    bumbs along the road.
    This may be an unrelated problem:
    On my Ipad, before OS 5 upgrade, I was was able to view Xfinity, HBO Live, ABC Live and CNN Live in full
    screen using the popup full screen icon on the top right of the screen.
    After OS 5,  HBO,ABC,CNN LIVE  -  all could be viewed full screen using the popup icon.
    The popup Icon is not available with Xfinity.  Xfinity is now letterbox.   Very, very annoying!!!
    The Comcast New Products department said that engineering would fix this problem.  I sure hope they do.
    Howie

  • Problems with Itunes Full Screen in MBA 2013 - 10.9 - Flickering Subtitles

    All,
    I have an issue when I use subtitles in HD movies (Wolverine being the latest example) using iTunes 11.1.3 and play it in full screen on 10.9. Subtitles flicker and sometimes when the next subtitle appears, the old one stays while flickering. It works perfectly when not in full screen. It also works well without subtitles (even though I think it does flicker a bit)
    Has anyone else noticed this?
    I have also noticed that when I move my mouse so the control-pad comes up (play/pause/etc), the screen flickers a bit. This did not happen in Mountain Lion.
    Thanks,
    Alex

    I found a temporary answer for this problem. While in fullscreen you can pull the control panel in a corner, and stay with your mouse pointer on it, the subtitles appear correctly and you can watch the movie in fullscreen.
    But i hope, there is an update comming to solve this problem.

  • Scale in Proportion for full screen

    Hi - I have a mc that I am using to create a full screen
    slideshow in my browser window - works fine, except I cannot get
    the mc to stay in proportion, ie, keep x the same as y, no matter
    what size the browser. I have this code:
    Anyone any idea? Thanks
    this.slides._width = Stage.width;
    this.slides._height = Stage.height;
    this.slides.scaleY = slides.scaleX;

    Mail and iTune too. My experience is that whatever application I opened in full screen mode, any kind of screensaver doesn't kick in on my MacBook Pro. It's quite annoying.

  • Program that should open in silent mode opens in full screen

    I have a program with the following startup shortcut:
    "C:\Program Files (x86)\MYOB\PDF Manager\PDFManager.exe" -s "C:\Program Files (x86)\MYOB\PDF Manager"
    According to the software developer (MYOB Accounting) this shortcut should start the program 'hidden' and in the notifications area of the taskbar.  However, for every employee who logs in, this program actually opens full screen.  MYOB have (rightly
    or wrongly) suggested the problem is our system because no one else is reporting the problem to them. 
    So, if anyone has any guidance on what is going on, or on how I can further troubleshoot the issue, I would be most appreciative.
    Thanks,
    Shane
    Shane

    Hi Shane,
    Firstly let us know, which is the operating system you are using for your environment?
    Are you opening the program in remote desktop session?
    Did you provide any group policy setting for any of the program?
    Does this issue occur for all users?
    Apart from that, this question is mostly not related to RDS you can ask in general forum.
    Thanks.

  • Someone helped me with this full screen pop up...but i can't recreate his link...

    http://www.actionscript.org/forums/s....php3?t=139424
    2/3 the way down, Atomic sent me a link, that says
    'HERE".....to create a centered full screen flash pop up that works
    on all browsers and fixes the 'click to activate' bug.
    But I can't recreate it?
    Can someone help me?
    I think he is using a javascript file....but I can't figure
    out the code to launch the pop up...and utilize that java.
    thanks.

    The guy already did everything for you!
    Here is the HTML page:
    <meta http-equiv="Content-Type" content="text/html;
    charset=iso-8859-1" /><!--url's used in the
    movie--><!--text used in the movie--><!-- saved from
    url=(0013)about:internet --><center><br />
    <br />
    <script type="text/javascript"
    src="/Scripts/flashobject.js"></script>
    <div id="flashcontent">This text is replaced by the
    Flash movie. </div>
    <script type="text/javascript">
    var fo = new FlashObject("newsplash.swf", "mymovie", "550",
    "400", "7", "#ffffff");
    fo.write("flashcontent");
    </script></center>
    Just edit the above code with your swf info. The create a
    folder called Scripts and save the flashobject.js file in it. Done
    and done.

Maybe you are looking for