Using self_reception, can I differ the received messages between received and transmitted ones

Hi,
i have a NI-CAN PXI 8464 card series 2 (well, at least I hope it's series 2 :-) ) and want to use self_reception, for that I can receive incomming messages and my one sent one. Is there a way how I can tell if a received message is a incomming one, or a transmitted one.
I'm using the Frame API with CVI and the latest NI-CAN Driver
Thanks in Advance
Olli

There is no special treatment of
these frames, they are seen on the CAN bus by the receive portion of
the transceiver just as any other frame transmitted on the CAN bus. So unfortunately you cannot differ them from frames received normaly over the CAN bus. The only way would be to create a logic which stores transmitted frames and are compared agains frame received in the read queue.
http://digital.ni.com/public.nsf/allkb/14429577623AEB5286257005004A9B02?OpenDocument

Similar Messages

HT1338 I cannot print wirelessly from Macbook Pro: this is the error message I receive /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII failed. can anyone help. I have been able to print on this printer for

I cannot print wirelessly from Macbook Pro: this is the error message I receive /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII failed. Can anyone help. I have been able to print on this printer for months, then yesturday out of the blue I get this error.

"/Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII failed"
I also saw this same error message above the Print Queue, ever since allowing the Epson Printer Software Update (August 2013) to install. After this update installed, I was able to print a basic Test Page from the Print Queue, but when printing from any application I only got "Looking for printer..." displayed above the Print Queue, which would stall and never print.
2008 MacBook, 10.7.5. It used to print to my Epson WorkForce 845 wirelessly without problems, before this software update was installed.
Changing the driver from "Epson WorkForce 845" to "Epson WorkForce 600 - Gutenprint v5.2.3" was a workaround that did allow me to print, but I wasn't satisfied with that.
Found this better solution in https://discussions.apple.com/thread/5233149?start=0&tstart=0
(with thanks to Yuengdog1983):
This issue may be a result of the Computer Name being left empty:
Open System Preferences and choose Sharing.
Enter a name for your computer.
Even without restarting the MacBook, I was able to now change back to using the Epson WorkForce 845 driver v9.0 successfully. I never would have guessed that a Computer Name is required in order to print!

HT3529 I have and iPod Touch, and my sister has an iPod touch. Both use the same Apple ID. If I use iMessage, can my sister see my messages?

I have and iPod Touch, and my sister has an iPod touch. Both use the same Apple ID. If I use iMessage, can my sister see my messages?

Yes.
I recommend that you
Create a NEW account/ID using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
Use the new ID but only for:
Settings>Messages>Send and Receive
Settings>FaceTime
Settings>GameCenter
and Settings>iCloud if you want to have separate Contacts Calendar and some other things.
Continue to use the same/common Apple ID for Settings>iTunes and App stores so you can share purchases.

I recently bought a new macbook pro and set it up using the migration assistant and my mac mini. I can't get the text message forwarding feature to work with both computers.

I recently bought a new macbook pro and set it up using the migration assistant from my mac mini. I can't get the text message forwarding feature to work with both computers. It keeps saying that I only have 2 devices setup, my iPad and my macbook pro. When I mess with the setting on my mac mini, it goes from saying that that is one of the devices to my macbook pro being the 2nd device. I think that something happened as a result of my using the migration assistant and now it thinks that my macbook pro and my mac mini are one and the same computer. Any ideas?

Thanks, Sig.
The old computer is a 2.6 Ghz Intel Core 2 Duo
The new one is a 2.3 GHz intel core i7
In going over this, thanks to "tallking it out" with you, I did discover the Text Edit problem. Because I've still been unable to get the new computer text size (fonts or whatever) to match the old computer, I did not notice that the curser is now different--the line midway down the curser has to be placed on the line I am working upon, otherwise the edits go elsewhere on the page. Now, with a bit of difficulty, I am able to get Text Edit to work correctly.
If you have any ideas as to why my menu bar and Text Edit type are still so slow, I'd love to have them.
(I went through the process you suggested earlier, re my Trackpad preferences, and found no improvement.)

Have photoshop cs6 for windows and am now migrating to a mac with Yosemite installed. Where can I download the cs6 for mac? And can I use the same serial no that I received for windows.

Have photoshop cs6 for windows and am now migrating to a mac with Yosemite installed.
Where can I download the cs6 for mac? And can I use the same serial no that I received for windows.

You need to run a platform swap:
Order product | Platform, language swap
Until it's through, you can use the trial version.
Download CS6 products
Mylenium

How can I view the text messages sent and received from my phone?how can I view the past text messages sent to my phone

How can I view the text messages sent and received on one of the other phones on my plan?

You would have to view them on the other phone.

I am trying to burn a .mov file from fcp xpress timeline to a dvd. The popup message I receive prior to inserting the dvd is that I need 20.05 gb of space available on dvd (a 1.25 min). How can I get this program onto a dvd that shows a max of 8.5gb?.

I am trying to burn a .mov file from fcp xpress timeline to a dvd. The popup message I receive prior to inserting the dvd is that I need 20.05 gb of space available on dvd (a 1.25 min program). How can I get this program onto a dvd (where the max available gb's for off the shelf dvds-r) shows a max of 8.5gb?. Please help. Thank You!

You have posted your question in the Final Cut Pro X forum. You want to be in this forum instead; https://discussions.apple.com/community/professional_applications/final_cut_expr ess_hd
Good luck.
Russ

When I turn on messages, I can't see my messages. All I can see is a screen with horizontal lines and a text list of addresses. How can I get the regular message screen back?

When I turn on Messages, I can't see my messages. All I can see is a screen with horizontal lines. How can I get the regular Messages screen back?

The same is happening for me. Today I decided to reboot my PC because it was acting up a bit, go figure, and then for some reason at the same time the PC was restarting my macbook froze. I had to do a reboot with the restart button but then all that came up was a gray background and in the middle of the screen was a darker gray folder with a white question mark in the middle of it, blinking. I can't imagine why the restart would've affected my macbook. After finding information on how to fix this, I tried all of the steps that were given about using the mac OS X disk to use the first aid utility to fix it. When using the Disk Utility option whenever I select my hardrive and am in the First Aid tab, the only button I can use is the Verify Disk Permissions. The other three buttons, and namely the most important Repair Disk button, is/are not selectable (grayed out). I then tried resetting the PRAM the way they also said with the command + option + P + R and waited for the second startup sound. After that I gave the Disk Utility a second try, but still nothing. And now if I try to just reinstall the OS completely I can't even select a destination volume on the third step (Select Destination). Apparently this means i'm SOL.

Just got a Nikon D610 and CS5 for Mac can't open the images -- message says installed version of camera raw doesn't support the camera. Downloaded the Raw 6.2 update for Mac, but installation failed. Now what?

just got a Nikon D610 and CS5 for Mac can't open the images -- message says installed version of camera raw doesn't support the camera. Downloaded the Raw 6.2 update for Mac, but installation failed. Now what?

The D610 didn't get out-of-the-box RAW support until Photoshop CC.
You can either upgrade to CC or use the DNG Converter to convert and open your DNGs in CS5.

Table in which RZ20 alerts are stored (Where can I find the error messages)

Hi All,
I want to know the table where i can see all the error messages poplulated as alerts in the TCode RZ20.

hi,
You can use the FM "BBP_GET_STATE_MONITOR" to get the avrious alert messages.
BR,
Disha.
Do reward points for useful answers

I recently received a mac book air 11 inch for christmas ... i beliehve it was bought in the states from my father i was unaware of the specs until i opened and read it... and i was wondering if i can still do the upgrade to 8gb ram and bigger flash drive

i recently received a mac book air 11 inch for christmas ... i beliehve it was bought in the states from my father i was unaware of the specs until i opened and read it... and i was wondering if i can still do the upgrade to 8gb ram and bigger flash drive.. is this possible and for how much? its only a week old.

Your 14 days are up, however you could take your case to Apple Inc. regarding same,
however those are the stipulations.
RAM cannot be upgraded however, period, its permanent on the logic board after mfg.
As for the SSD (solid state drive), upgrading same is a bad premise 9 times out of 10.
No notebooks is a mass storage device, and you need an external HD for data redundancy and backups regardless.
data that is static on your SSD and not used very often has no logical reason to be ON the notebooks, and best saved on a superslim external HD ($60)
SSD are very expensive, even a small one, HD are cheap as dirt and users are recommended to have one regardless for many good reasons.

How can i stop the upgrade message appearing everytime i open iphoto?

How can i stop the upgrade message appearing everytime i open iphoto?
It's getting ridiculous that every time i open iphoto that it insists in being upgraded and repaired. Anyone know how i can get rid of this without reinstalling it?
Thanks

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Can I remove the annoying message box thingy beneath the search bar on FF 8

Can I remove the annoying message box thingy beneath the search bar on FF 8

You can hide the box that shows the snippets with code in userChrome.css
Add code to userChrome.css below the @namespace line.
* http://kb.mozillazine.org/userChrome.css
* http://kb.mozillazine.org/Editing_configuration
You can use the ChromEdit Plus extension to have easier access to the customization files.
* ChromEdit Plus: http://webdesigns.ms11.net/chromeditp.html <br />
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
/* hide snippet container on the about:home page */
#snippetContainer { display: none !important; }
</nowiki></pre>

I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview

I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview shows the contents, I can't open the document (Powerpoint) and I can't move the document. I tried "Copy" and paste but it doesn't work. I tried "Share" with Airdrop and iChat, but the file is inaccessible. When i try to rename the file, it says the filename is too long.
When I try to open it, it says the alias is not good, and asks if I want to fix the alias. I'm afraid to do that and lose all access to this document.
Right now, it feels like a ghost document - it is on the computer intact, but it is in an undisclosed location and inaccessible.
Please help!!

I was able to resolve this by repairing permissions, even though no permissions error was listed specifically for that file.
I could also have recovered it through Time Machine, but I'm interested in knowing how not to have this happen again!
I was afraid of rebooting and possibly losing track even of the ghost.
I did not try EasyFind - I'll keep that in mind next time.
Thanks for all the comments.

I have an old iPod Classic with 80 GB (I think) of space. I saved all my songs in an external hard drive, but the iTunes library resided in an old computer (no longer working). Can I get the libray from my iPod and use it in my new computer (Windows)?

I have an old iPod Classic with 80 GB (I think) of space. I saved all my songs in an external hard drive, but the iTunes library resided in an old computer (no longer working). Can I get the library from my iPod and use it in my new computer (Windows)?

You might want to check your process for moving your iTunes music against this: http://support.apple.com/kb/HT4527.

Using self_reception, can I differ the received messages between received and transmitted ones

Similar Messages

Maybe you are looking for