Using SJS MQ 4.0 as JMS provider with JBoss or Apache Geronimo

Is it possible to integrate SMS MQ 4.0 as the JMS provider for JBoss and / or Apache Geronimo ?
For JBoss, the only info that I can find is this:
http://swforum.sun.com/jive/thread.jspa?threadID=45414&messageID=127657
... but not too much detail on how to actual configured JBoss.
Any step-by-step info ?

Hmm... I installed the client (5.3) and did not get the jmsadmin tool. To me it seems like jmsadmin only comes with the server installation. What is the content of the .bindings file? Is it enough to copy the one from the MQ server or is this something I must create on the server running the Oracle application server? I would guess .bindings is the JNDI bindigs for the queues / factories etc. and will have to match the way queues are configured on the server.
So far I've found two "useful" resources:
http://download-west.oracle.com/docs/cd/B10464_01/web.904/b10326/jms.htm#1020231
http://www.oracle.com/technology/tech/java/oc4j/1003/how_to/jcajmsmq/doc/Install.html
The last resource states that MQ server has to be installed on the same server as Oracle Appserver.

Similar Messages

XI to IBM Websphere Default JMS Provider with JNDI

Hello everybody!
We face a problem with connecting SAP XI to IBM WebSphere Default JMS Provider (need to send a message from XI to WebSphere JMS and receive the response).
We have the following versions installed:
    SAP XI: 7.0 SP8 , Sun JDK 1.4.2
    IBM WebSphere: IBM WebSphere Application Server ND, 6.0.2.17, J2RE 1.4.2 IBM
We cannot set the JMS adapter of SAP XI for conecting with IBM WebSphere Default JMS Provider. The Communication Channel has erroneous state (at runtime) and the Communication Channel Monitoring tool displays the error message as described below (under "Variant 1" and "Variant 2" sub-headings) depending on the settings performed.
For connecting, the following JMS-provider settings were used at IBM WebSphere side:
   JMS Providers: Default Messaging Provider
   Queue Connection Factories: name:QueueConnectionFactory, jndi:jms/QueueConnectionFactory, provider: Default Messaging Provider
   Queues: name Queue, jndi: jms/Queue, provider: Default Messaging Provider
The XI communication channel (and associated JMS-adapter) was set as Variants 1 and 2 show. Settings for both cases and received error messages were the following:
<b>Variant 1.</b>
    Adapter type: JMS
    Type: Receiver
    JMS Provider: Access JMS Provider with JNDI (Java Naming and Directory Interface)
    JNDI Lookup Name of QueueConnectionFactory: jms/QueueConnectionFactory
    JNDI Lookup Name of JMS Queue: jms/Queue
    Name of JNDI Initial Context Factory: com.sap.engine.services.jndi.InitialContextFactoryImpl
    JNDI Server Address: iiop://WEBSPHERE.HOST:2809/
    As the result, the Communication Channel Monitoring displays that the channel has erroneous state and the following error message is written:
    "Error during channel initialization; exception trace: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of jms/QueueConnectionFactory.
at com.sap.engine.services.jndi.implserver.ServerContextImpl.lookup(ServerContextImpl.java:649)"
<b>Variant 2</b>
    The same settings as in Variant 1 above, were used and additionally the following settings were done:
    - Name of JNDI Initial Context Factory: com.ibm.websphere.naming.WsnInitialContextFactory
    - The archive aii_af_jmsproviderlib.sda containing libraries required by WsInitialContextFactory, was deployed to the SAP WebAS where the XI is running. Those libraries were taken from WebSphere Application Server Pluggable Application Client installation package (described in the article "WebSphere Application Server Pluggable Application Client" located at http://www-128.ibm.com/developerworks/websphere/library/techarticles/0409_bhogal/0409_bhogal.html)
    - Also, as it is recommended in the referred article, the files required by IBM's iiop protocol (ibmext.jar ibmorb.jar ibmorbapi.jar) were put to the folder jre/lib/endorsed of the server(Sun JVM 1.4.2 is used by SAP WebAS / XI).
    As the result, the Communication Channel Monitoring displays that the channel has erroneous state as well and the following error message is written:
   "No adapter registered for this channel"
We have not found the recommended solution either in SDN forums or in Internet in general. Is it yet possible to connect SAP XI to IBM WebSphere Default JMS Provider having mentioned product versioning? If yes, what settings have to be performed?

IBM Websphere Default JMS Provider which is installed alongwith the application server is nothing but a scaled down version of the IBM WebSphere MQSeries. you should be able to connect to it with the same settings that can be used for a separate MQSeries server connectivity from XI.

I get a error message "To charge faster, use the cable and device that were provided with this phone" when charging my Samsung Galaxy note 3. I took it to a store last week and they said it has something to do with the last software update. They tried ch

I get a error message "To charge faster, use the cable and device that were provided with this phone" when charging my Samsung Galaxy note 3. I took it to a store last week and they said it has something to do with the last software update. They tried charging it at the store and got the same message. I was given another phone, I still get the same error with the new phone.

Wowuor,
Thank you so much for reaching to us today. I want to make sure that we get the device charging the correct way. There is no physical or liquid damage to the phone or to the power cord correct? Did this error just start to appear as of last week? Please keep us posted.
KevinR_VZW
Follow us on Twitter @VZWSupport

Everytime I try charging my Note 3 I get an error message: To charge faster, use the cable and device that were provided with this phone. What is the solution? The cable is fine and is the original charger!

Every time I try charging my Note 3 I get an error message: To charge faster, use the cable and device that were provided with this phone. What is the solution? The cable is fine and is the original charger!

Hello teachermama10, The Factory Data Reset does remove all data including files and photos. I understand that making sure your phone information is backed up is of the upmost importance. You can ensure your phone data is backed up using these links: http://vz.to/1uM5mwZ and http://vz.to/1vEzYok. You can also try our great Verizon Cloud feature as an option for backing up and syncing your phone info! Check it out: http://vz.to/1s4GctA.
TanishaS1_VZW
Follow us on Twitter @VZWSupport

Integrating JMS providers with JBoss

Hi.
I am trying to integrate a foreign JMS provider to JBoss. I looked at the docs and all - and even managed to deploy an mbean that puts the factories and queues into the jndi - after which anyone who does a lookup() on it is capable of using the foreign provider.
However, trying to put an MDB - it doesn't work anymore. the MDB does not register itself on the destination it's supposed to - and therefore never receives the messages. The documentation is not very clear about how to do all that - does anyone have any experience with that?
Thanks, Nimo.

Hi Nimo,
Many of the most popular JMS providers (such as ArjunaMS, SonicMQ and FioranoMQ) provide various integration facilities with JBoss. I just did a Google site search and found information on all of the above how to integrate those providers with JBoss:
ArjunaMS Google search was:
site:www.arjuna.com jboss
Best hit:
http://www.arjuna.com/products/jboss/
SonicMQ Google search was:
site:www.sonicsoftware.com jboss
Best hit:
http://www.sonicsoftware.com/cgi-bin/sonic.cgi/dx_results.w?subcategory=23
FioranoMQ Google search was:
site:www.fiorano.com jboss
Best hit:
http://www.fiorano.com/downloads/fmq/FMQFaqs.pdf (pg 73 provides refers to JBoss integration information in a "Developer's Guide" - I guess this must be in a download of the product?)
Hope this helps you!
Cheers,
Tom Jenkinson
Arjuna Technologies Limited

Error while using webmethod JMS provider with JNDI

Hi,
I am using webmethod JMS provider (not SAP JMS) with JNDI to connect to webmethod with XI. Central J2EE adapter engine is used and the comm chaneel is configured in with appropriate Provider JNDI Server address, initial context factory, Name of queue connection factory etc.
While activated the adapter short log shows: Adapter has not provided any status information about this channel"
In the detailed log following error message is displayed: "Obtained connection factory: null#"
#1.5 #001A4BAC31000052000001520000152200045090BF28DACA#1214482519514#com.sap.aii.adapter.jms.core.connector.JndiConnectorImpl##com.sap.aii.adapter.jms.core.connector.JndiConnectorImpl.createConnectionFactory()#J2EE_GUEST#0##n/a##8b16bd50437911ddc9f2001a4bac3100#SAPEngine_Application_Thread[impl:3]_16##0#0#Path##Plain###Entering method#
#1.5 #001A4BAC31000052000001530000152200045090BF28DB65#1214482519514#com.sap.aii.adapter.jms.core.connector.JndiConnectorImpl##com.sap.aii.adapter.jms.core.connector.JndiConnectorImpl.createConnectionFactory()#J2EE_GUEST#0##n/a##8b16bd50437911ddc9f2001a4bac3100#SAPEngine_Application_Thread[impl:3]_16##0#0#Debug##Plain###Looking up connection factory under name NAIP_XIQueueConnectionFactory#
#1.5 #001A4BAC31000052000001540000152200045090BF28E42E#1214482519516#com.sap.aii.adapter.jms.core.connector.JndiConnectorImpl##com.sap.aii.adapter.jms.core.connector.JndiConnectorImpl.createConnectionFactory()#J2EE_GUEST#0##n/a##8b16bd50437911ddc9f2001a4bac3100#SAPEngine_Application_Thread[impl:3]_16##0#0#Debug##Plain###Obtained connection factory: null#
#1.5 #001A4BAC31000052000001550000152200045090BF28E4B3#1214482519516#com.sap.aii.adapter.jms.core.connector.JndiConnectorImpl##com.sap.aii.adapter.jms.core.connector.JndiConnectorImpl.createConnectionFactory()#J2EE_GUEST#0##n/a##8b16bd50437911ddc9f2001a4bac3100#SAPEngine_Application_Thread[impl:3]_16##0#0#Path##Plain###Exiting method#
#1.5 #001A4BAC31000052000001560000152200045090BF28E528#1214482519516#com.sap.aii.adapter.jms.core.connector.ConnectorImpl##com.sap.aii.adapter.jms.core.connector.ConnectorImpl.executeConnectionFactoryInvocations()#J2EE_GUEST#0##n/a##8b16bd50437911ddc9f2001a4bac3100#SAPEngine_Application_Thread[impl:3]_16##0#0#Path##Plain###Entering method#
#1.5 #001A4BAC31000052000001570000152200045090BF28E5A9#1214482519517#com.sap.aii.adapter.jms.core.connector.ConnectorImpl##com.sap.aii.adapter.jms.core.connector.ConnectorImpl.executeConnectionFactoryInvocations()#J2EE_GUEST#0##n/a##8b16bd50437911ddc9f2001a4bac3100#SAPEngine_Application_Thread[impl:3]_16##0#0#Info##Java###Sucessfully executed CF invocations for connection factory object: for profile: #2#<null>#ConnectionProfile of channel: CC_RCV_JMS_SAPJNDIon node: 3010950 having object id: e4413a5265a436459e271d5e0dd4859b#
#1.5 #001A4BAC31000052000001580000152200045090BF28E64E#1214482519517#com.sap.aii.adapter.jms.core.connector.ConnectorImpl##com.sap.aii.adapter.jms.core.connector.ConnectorImpl.executeConnectionFactoryInvocations()#J2EE_GUEST#0##n/a##8b16bd50437911ddc9f2001a4bac3100#SAPEngine_Application_Thread[impl:3]_16##0#0#Path##Plain###Exiting method#
#1.5 #001A4BAC31000052000001590000152200045090BF28E6CA#1214482519517#com.sap.aii.adapter.jms.core.connector.ConnectorImpl##com.sap.aii.adapter.jms.core.connector.ConnectorImpl.buildConnection()#J2EE_GUEST#0##n/a##8b16bd50437911ddc9f2001a4bac3100#SAPEngine_Application_Thread[impl:3]_16##0#0#Path##Plain###Entering method#
#1.5 #001A4BAC310000520000015A0000152200045090BF28E741#1214482519517#com.sap.aii.adapter.jms.core.common.StringUtils##com.sap.aii.adapter.jms.core.common.StringUtils.isBlank(String str)#J2EE_GUEST#0##n/a##8b16bd50437911ddc9f2001a4bac3100#SAPEngine_Application_Thread[impl:3]_16##0#0#Path##Plain###Entering method#
#1.5 #001A4BAC310000520000015B0000152200045090BF28E7C3#1214482519517#com.sap.aii.adapter.jms.core.connector.ConnectorImpl##com.sap.aii.adapter.jms.core.connector.ConnectorImpl.buildConnection()#J2EE_GUEST#0##n/a##8b16bd50437911ddc9f2001a4bac3100#SAPEngine_Application_Thread[impl:3]_16##0#0#Debug##Plain###Creating connection...#
#1.5 #001A4BAC310000520000015C0000152200045090BF28EB51#1214482519518#com.sap.aii.adapter.jms.core.channel.AdapterImpl##com.sap.aii.adapter.jms.core.channel.AdapterImpl.addOrReplaceChannel(Channel cpaChannel)#J2EE_GUEST#0##n/a##8b16bd50437911ddc9f2001a4bac3100#SAPEngine_Application_Thread[impl:3]_16##0#0#Warning##Java###Catching #1#java.lang.NullPointerException
at com.sap.aii.adapter.jms.core.connector.ConnectorImpl.buildConnection(ConnectorImpl.java:198)
at com.sap.aii.adapter.jms.core.connector.ConnectorImpl.doConnect(ConnectorImpl.java:166)
at com.sap.aii.adapter.jms.core.connector.JndiConnectorImpl.doConnect(JndiConnectorImpl.java:186)
at com.sap.aii.adapter.jms.core.connector.ConnectorImpl.connect(ConnectorImpl.java:151)
at com.sap.aii.adapter.jms.core.channel.ChannelImpl.doStart(ChannelImpl.java:235)
at com.sap.aii.adapter.jms.core.channel.ChannelImpl.start(ChannelImpl.java:154)
at com.sap.aii.adapter.jms.core.channel.AdapterImpl.doAddUpdateChannel(AdapterImpl.java:404)
at com.sap.aii.adapter.jms.core.channel.AdapterImpl.addOrReplaceChannel(AdapterImpl.java:376)
at com.sap.aii.adapter.jms.core.channel.ChannelLifecycleCallbackImpl$1.run(ChannelLifecycleCallbackImpl.java:51)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
#1.5 #001A4BAC310000520000015D0000152200045090BF28EC6A#1214482519518#com.sap.aii.adapter.jms.core.channel.AdapterImpl##com.sap.aii.adapter.jms.core.channel.AdapterImpl.addOrReplaceChannel(Channel cpaChannel)#J2EE_GUEST#0##n/a##8b16bd50437911ddc9f2001a4bac3100#SAPEngine_Application_Thread[impl:3]_16##0#0#Error##Plain###[[ChannelName:CC_RCV_JMS_SAPJNDI,ChannelId: e4413a5265a436459e271d5e0dd4859b]] Error adding/updating channel.#
#1.5 #001A4BAC310000520000015E0000152200045090BF28ECF8#1214482519518#com.sap.aii.adapter.jms.core.channel.AdapterImpl##com.sap.aii.adapter.jms.core.channel.AdapterImpl.addOrReplaceChannel(Channel cpaChannel)#J2EE_GUEST#0##n/a##8b16bd50437911ddc9f2001a4bac3100#SAPEngine_Application_Thread[impl:3]_16##0#0#Path##Plain###Exiting method#
#1.5 #001A4BAC310000520000015F0000152200045090BF28ED76#1214482519519#com.sap.aii.adapter.jms.core.channel.ChannelLifecycleCallbackImpl##com.sap.aii.adapter.jms.core.channel.ChannelLifecycleCallbackImpl.channelAdded().run()#J2EE_GUEST#0##n/a##8b16bd50437911ddc9f2001a4bac3100#SAPEngine_Application_Thread[impl:3]_16##0#0#Path##Plain###Exiting method#
#1.5 #001A4BAC3100005F000000660000152200045090BF65478A#1214482523474#com.sap.aii.adapter.jms.core.channel.ChannelLifecycleCallbackImpl#sap.com/com.sap.xi.mdt#com.sap.aii.adapter.jms.core.channel.ChannelLifecycleCallbackImpl.channelAdded(Channel channel)#AAAAAAAAA#108##n/a##002ee500437911dd99cf001a4bac3100#SAPEngine_Application_Thread[impl:3]_29##0#0#Path##Plain###Exiting method#
Please let me know anyone has come accross the problem or has idea how to solve it. Thanks.

Hi,
Ask ur basis admin to restart JMS adpater From Vis administrator and try again to activate the comm channel.
Hope this will solve ur problem and once again check connection fatcory and Queue name provided by Webmethod admin.
Regards,
Srini

Using JBOSS JMS provider with XI

Hi,
I am connecting XI to a custom Java application developed on JBOSS app server. The custom application is developed with connectivity using JMS. I was told that JBOSS has a JMS provider used by the custom app. Has anyone done this before? Is it possible for XI to use JBOSS JMS provider? How difficult is this going to be for synchronous interface? Any information is greatly appreciated.
thanks.
James Chang

hi,
first deploy jboss-j2ee.jar,jms.jar,dom4j-full.jar..for deploying these jars into the xi follow this link
http://help.sap.com/saphelp_nw04s/helpdata/en/33/e6fb40f17af66fe10000000a1550b0/frameset.htm
then to make use of the JMS adapter follow this link,
http://help.sap.com/saphelp_nw04s/helpdata/en/4d/a3bc97ff55c742af7faed661635baf/frameset.htm
hope this will be useful.....
regards,
Sundararamaprasad

Using Swiftmq as the third-party Jms provider in Weblogic11

Hi, I am using swiftmq as 3rd-party jms provider in wls, however when I am trying to deploy a MDB listening on the queue configed in swiftmq.rar (resource adapter) in wls, it warns that ***MDB is unable to connect to the JMS destination: myforeigndestination.
The Error was:
weblogic.jms.common.InvalidDestinationException: Foreign destination
, so do I need to configure a foreign connection factory and config the mdb to refers to this foreign connection factory? thx

Hi, I am using swiftmq as 3rd-party jms provider in wls, however when I am trying to deploy a MDB listening on the queue configed in swiftmq.rar (resource adapter) in wls, it warns that ***MDB is unable to connect to the JMS destination: myforeigndestination.
The Error was:
weblogic.jms.common.InvalidDestinationException: Foreign destination
, so do I need to configure a foreign connection factory and config the mdb to refers to this foreign connection factory? thx

Configuring WL JMS as a foreign JMS provider with security scope (WLS 8.1)

Hello, i have a problem accessing a queue from a foreign jms provider, if the queue has a security policy. I have the following scenario:
          1) Server server1 in domain1 (WLS81) has a JMS Server with one queue queue1 with a security policy "Caller is a member of the group GROUP_QUEUE". There is also a user USER_QUEUE user defined, which belongs to the this group.
          There is also a ConnectionFactory with "XA Connection Factory Enabled = true" configured.
          The queue and the connection factory are visible in the jndi tree of this server.
          2) Server server2 has a foreign jms server. Foreign JMSConnectionFactory and foreign JMSDestination refer to the jndi entries of server 1. For Foreign JMS Connection Factory username is set to USER_QUEUE. JNDI entries for foreign references are visible in jndi tree of this server.
          I wrote a standalone client to store messages in the queue accessing server1 with USER_QUEUE sucessfully.
          Now I try to deploy a MDB on server2 accessing the queue on server 1. I tried different versions of ejb-jar.xml/weblogic-ejb-jar.xml to access the queue, but with no luck.
          scenario a): no security entries in both descriptors; weblogic-descr has entries <destination-jndi-name> and <connection-factory-jndi-name> pointing to the local jndi names. REsult:
          <11.02.2005 19.16 Uhr CET> <Warning> <EJB> <BEA-010061> <The Message-Driven EJB:
          CancelEasyMoneyBean is unable to connect to the JMS destination: prepaid.Cancel
          EasyMoneyQueue. The Error was:
          [EJB:010196]'weblogic.jms.common.JMSSecurityException: Access denied to resource
          : type=<jms>, application=, destinationType=queue, resource=CancelEasyMoneyQueue
          , action=receive' Linked exception = 'weblogic.jms.common.JMSSecurityException:
          Access denied to resource: type=<jms>, application=, destinationType=queue, reso
          urce=CancelEasyMoneyQueue, action=receive'
          So entering username and password for ForeignJMSConnectionFactory doesn't do the trick.
          scenario b:) trying to set additional security entries in both descriptors. I added a role queueUser to my mdb and to weblogic-descr a
          <security-role-assignment>
          <role-name>queueUser</role-name>
          <principal-name>USER_QUEUE<principal-name>
          </security-role-assignment>
          I added the user USER_QUEUE and the group GROUP_QUEUE to server2.
          Now server 1 throws exception after redeployment on server 2:
          java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[USER_QUEUE, GROUP_QUEUE].
          java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[USER_QUEUE, GROUP_QUEUE]
          at weblogic.security.service.SecurityServiceManager.seal(SecurityService
          Manager.java:680)
          Has anybody an idea or a pointer how to define access from a mdb to a foreign queue using security ?
          Thanks in advance,
          Rainer

Hello, i have a problem accessing a queue from a foreign jms provider, if the queue has a security policy. I have the following scenario:
          1) Server server1 in domain1 (WLS81) has a JMS Server with one queue queue1 with a security policy "Caller is a member of the group GROUP_QUEUE". There is also a user USER_QUEUE user defined, which belongs to the this group.
          There is also a ConnectionFactory with "XA Connection Factory Enabled = true" configured.
          The queue and the connection factory are visible in the jndi tree of this server.
          2) Server server2 has a foreign jms server. Foreign JMSConnectionFactory and foreign JMSDestination refer to the jndi entries of server 1. For Foreign JMS Connection Factory username is set to USER_QUEUE. JNDI entries for foreign references are visible in jndi tree of this server.
          I wrote a standalone client to store messages in the queue accessing server1 with USER_QUEUE sucessfully.
          Now I try to deploy a MDB on server2 accessing the queue on server 1. I tried different versions of ejb-jar.xml/weblogic-ejb-jar.xml to access the queue, but with no luck.
          scenario a): no security entries in both descriptors; weblogic-descr has entries <destination-jndi-name> and <connection-factory-jndi-name> pointing to the local jndi names. REsult:
          <11.02.2005 19.16 Uhr CET> <Warning> <EJB> <BEA-010061> <The Message-Driven EJB:
          CancelEasyMoneyBean is unable to connect to the JMS destination: prepaid.Cancel
          EasyMoneyQueue. The Error was:
          [EJB:010196]'weblogic.jms.common.JMSSecurityException: Access denied to resource
          : type=<jms>, application=, destinationType=queue, resource=CancelEasyMoneyQueue
          , action=receive' Linked exception = 'weblogic.jms.common.JMSSecurityException:
          Access denied to resource: type=<jms>, application=, destinationType=queue, reso
          urce=CancelEasyMoneyQueue, action=receive'
          So entering username and password for ForeignJMSConnectionFactory doesn't do the trick.
          scenario b:) trying to set additional security entries in both descriptors. I added a role queueUser to my mdb and to weblogic-descr a
          <security-role-assignment>
          <role-name>queueUser</role-name>
          <principal-name>USER_QUEUE<principal-name>
          </security-role-assignment>
          I added the user USER_QUEUE and the group GROUP_QUEUE to server2.
          Now server 1 throws exception after redeployment on server 2:
          java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[USER_QUEUE, GROUP_QUEUE].
          java.lang.SecurityException: [Security:090398]Invalid Subject: principals=[USER_QUEUE, GROUP_QUEUE]
          at weblogic.security.service.SecurityServiceManager.seal(SecurityService
          Manager.java:680)
          Has anybody an idea or a pointer how to define access from a mdb to a foreign queue using security ?
          Thanks in advance,
          Rainer

Jms provider with SSL transport : connectException

I have a jmsprovider that is connecting to a remote server(another domain) over SSl transport. I have trust and identity keystore created and configured. Looks like I have passed the SSL handshale stage and client side accepted trust certificate successfully.
After that it is doing JNDI look up on connection factory and failing there
The invocation resulted in an error: [JMSPool:169803]JNDI lookup of the JMS connection factory synergyConnectionFactory1 failed: javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3s://10.100.104.153:7002: Destination unreachable; nested exception is:
*java.net.ConnectException: Connection refused: connect; No available router to destination].*
i have SSL listener port is 7002. Do I need to do any other setup on the remote server side to make the JNDI lookup success in this port? I am able to access the queue with no-ssl on 7001 port.
I am not using any service account here. Will that be required to make this work? If I do not provide any, then will be the default account (guest) used? And according to the default security policy on the jms resource side , this account will have access to the resource and JNDI lookup too.
Please suggest
Edited by: 818591 on Mar 1, 2011 12:36 PM

From the error it looks like a network connectivity issue .. r u able to telnet to port 7002 from the source box? some firewalls may allow only messages of certain protocol e.g. https to 7002 may work, but not t3s to 7002 .. make sure you are not dealing with a network/firewall issue..
I am not using any service account here. Will that be required to make this work?Service account will not be required unless the queue on the remote destination has been secured. By default, weblogic jms resources are unsecured meaning will allow anonymous access.

Use condition for assigning query to data provider with Javascript

Hi gurus,
I want to assign a query dynamically to a data provider when the user activated a Tab Panel in a Web Template (BI7).
I can do that easily with the standard function SET_DATA_PROVIDER_PARAMETERS but this action is do each time of the activation of the Tab Panel.
So I try to make a javascript for assign the query to the data provider only one time.
My problem is I havenu2019t found a solution to get the default query assigning to the data provider.
Itu2019s an example of what I try to do with javascipt :
function Load_Query()
var r=GET_DATA_PROVIDER PARAMETER ("QUERYVIEW_DATA_PROVIDER")
if (r <>empty)
executeJS_SET_DATA_PROVIDER_PARAMETERS_R()
Thank you for help,
Franck

Hi Janice,
You can check the Option Display Variable values only once.
Thie you will the variables being displayed only once eventhough they are used in Multiple Data provider.
If you want som variable to be data provider specific, then , you can create a new variable and add it int eh query.
For example in your case let us say COMP1 is the variable for company code used in DP1 and DP2.
If you want a different values to be selected for company code in DP1 and DP2 just replce the variable in DP2 with a new variabel COMP2.
Hope this helps.
Regards.
Shafi.

Using php-mysql module and Apache2.2 provided with FMS4.5

Hi,
we've recently downloaded and upgraded FMS from 3 to 4.5 on a server that has this configuration (before upgrading):
- Centos 5.5
- Apache 2.2.3
- mysql 5.0.77
- php 5.3.3
- perl 5.8.8
Everything was fined before upgrading since 3 years.
We decided to upgrade FMS to provide HLS to our customers.
Once we upgraded FMS and installed Apache that comes with the installer, we encountered lots of errors.
- no more php, all scripts were visible, so we had to reinstall php module; and by the way, how can't we have the logical directories for apache (like /etc/httpd/,...) instead of /opt/adobe/fms/Apache...
- no more perl, cgi script are also visible...
- and now, we are unable to connect to mysql database. Whatever we do, the following message appears:
Fatal error: Call to undefined function mysql_connect()
modules are in the right folders but no way....
If someone can help us,
regards,
Tony

i answer to myself:
I finally managed to do it.
The best way was this:
- backup the Apache folders from fms
- reinstall fms w/o apache
- reinstall properly the standard httpd ( i launched yum remove httpd before)
- copy modules from fms backup to /etc/httpd/modules so i havve specific modules
- update httpd.conf with adobe version (easy with Kompare)
restart httpd and fms
Now everything works well: php, mysql, cgi, ...

Configuration of JMS receiver Using Jboss JMS provider

Hi all..
I am configuring JMS adapter as receiver.
I am using JMS provider JBOSS .
I hav done configuration as
Transport protocol :Acess JMS provider with JNDI
JNDI lookUp Name of q connection factory: org.jboss.naming.LinkRefPairService
Name of JNDI initial Context factory :org.jnp.interfaces.NamingContextFactory
in sxmb_moni I am getting blak&white flag
IN Run time work bench In adapter monitoring I am getting
Receiver channel. Details: Cannot instantiate class: org.jnp.interfaces.NamingContextFactory.
Can anybody plz tell me why this haapend?

Did you deploy the JMS client jars to the J2EE Engine?
Cannot instantiate class: org.jnp.interfaces.NamingContextFactory sounds like the Framework can't find the class.
Take a look here:
Re: Using JBOSS JMS provider with XI
Greetz
Sebastian
Message was edited by: Sebastian Simon

Using external JMS provider

I am trying to use Tibco EMS as an external jms provider.
I created new factory (named TibcoFN) in JMSConnector service using visual administrator
Then I deployed and started it without any visible problem.
Then I created reference in a web.xml file of web application.
When I am calling lookup of initial context I always get naming exception.
What steps am I missing?
Piya

I am trying to use ActiveMQ as my external JMS provider and having a hard time doing so. I've deployed the activemq jar file in the JMS Connector service > library, and defined jms-factories.xml like:
<?xml version="1.0" encoding="UTF-8" ?>
<jms-factories>
<connection-factory>
    <factory-name>jms/ConnectionFactory</factory-name>
    <library-name>activemq</library-name>
    <context-factory-type>
      <link-factory-name>jmsfactory/default/QueueConnectionFactory</link-factory-name>
      <initial-context-factory>com.sap.engine.services.jndi.InitialContextFactoryImpl</initial-context-factory>
      <provider-url>sapvm-vc:61616</provider-url>
      <security-principal></security-principal>
      <security-credentials></security-credentials>
    </context-factory-type>
</connection-factory>
</jms-factories>
But I am getting the following error:
Application error occurred during request processing.
Details:   org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'exampleManagerContainer' defined in class path resource [integrationContext.xml]: Invocation of init method failed; nested exception is java.lang.NoSuchMethodError: javax.jms.ConnectionFactory.createConnection()Ljavax/jms/Connection;
Exception id: [005056AB07A0005B0000004100000614000449BF8461CFBE]
Any ideas, please???
thanks,

MDB behavior with Foreign JMS Provider

          I am experiencing some MDB behavior which I do not quite understand. I would appreciate
          if someone could tell me what might be happening.
          An application on WebLogic 8.1 SP1 (also tried it with SP2) has MDB's which listen
          on a MQ Queue. If I put a large XML message on the MQ Queue (say around 600 KB),
          the onMessage execution is very random, For the large messages only 1 MDB gets
          invoked and the other messages just sit on the MQ Queue. Even though I have defined
          an weblogic execute queue for the MDB's and they have 15 threads allocated.
          The other messages get picked up after the first one gets completed. The problem
          is the whole transaction (which is XA) can take a while (upto 10 minutes). This
          is not intended, but for some reason it takes that long.
          Also, while monitoring the MDB execute queues, I noticed that none of the threads
          from that queue are performing the work and a thread dump shows that the weblogic.ejb20.internal.JMSPoller
          thread has invoked the MDB and is currently waiting for the database to finish
          some processing.
          When the message size is smaller, the MDB's fire concurrently and are executed
          on the MDB execute queue.
          Thanks,
          Ketan.


When we're using MDBs against a foreign JMS provider with XA, the EJB
          container tries to reduce the number of threads that are blocked waiting for
          a message. You should see lots of threads working when there are lots of
          messages on the queue, a few threads (or only one) working when the queue is
          empty or nearly so, and there should be some ramp-up and ramp-down time in
          between. It sounds like the ramp-up takes longer in your case because
          receiving the very first message takes a long time.
          If this behavior is causing big problems for you, you might want to contact
          product support and file an enhancement request.
          greg
          "Ketan" <[email protected]> wrote in message
          news:[email protected]...
          >
          > Here is some more information regarding this issue.
          >
          > When I place sufficiently large messages (such that the parsing and
          processing
          > of these messages takes longer than it does for normal size messages), I
          notice
          > the following behavior.
          >
          > Lets say I put 6 large messages on the MQ Queue. The server immediately
          picks
          > up 1 message and starts processing it. The other 5 messages are sitting on
          the
          > MQ Queue, while the MDB execute queue has all 15 idle threads.
          >
          > After the processing of the message is done, 2 messages get picked up.
          This time,
          > 1 thread in the MDB execute queue gets the message and the other is
          processed
          > by the JMSPoller thread. After these 2 messages are processed, 3 Messages
          get
          > picked up and this time 2 messages are on the MDB execute queue and 1 is
          processed
          > by the JMSPoller.
          >
          > So based on this the question is ..Is this the expected behavior? I was
          under
          > the impression that the poller would simply dispatch messages to the
          execute queue,
          > and as a result, I was expecting all the messages would get picked up from
          the
          > MQ queue pretty fast and would not have to wait for 1 or more MDB's to
          finish
          > processing.
          >
          > I would really appreciate any suggestions anyone may have for me.
          >
          > Again the environment is WLS 8.1 SP2, MQ 5.3
          >
          > thanks,
          > Ketan

Using SJS MQ 4.0 as JMS provider with JBoss or Apache Geronimo

Similar Messages

Maybe you are looking for