Using sound from one Movie in another one

I have one animation movie and I want the sounds from that one on another version of the movie (another file). How can I export or copy these sounds?

Share your Project using SHARE/EXPORT USING QUICKTIME... and choose an audio only codec like AIFF. This will give you a sound file that you can use elsewhere.

Similar Messages

  • How can I move a Pages file from a folder to another one?

    I Have done the upgrade to mac os Yosemite but now i'm Not able to move a file from a folder to another one Inside iCloud
    now it's impossible to organize MY archive

    Thankyou Winston, you guess right. What i don't understand is why with the older version of mac os (10.9) i can organize my document into icloud folders using the Pages app window. But now with the new version i'm no longer able to do that. Using ipad in the same window there is no problem, but in mac os it doesn't work. 

  • How can I move a clip from one movie to another

    How can I move a clip from one movie to another?

    If it's just a clip, you can simply go to the other project and Add Media/From Files and Folders.
    But if it's a part of your movie -- say a sequence of clips or a clip that's had effects added to it -- you technically can't cut and paste betweeen projects in Premiere Elements. However, some people have been able to do it using the third party program ClipMate, available online.

  • Copy frames from one movie to another in Flash 8

    How do you copy frames from one movie to another in Flash 8?
    I found this one, but it does not work on Flash 8.
    http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_12863
    I want to copy the contents of a scene from one movie, and
    then create a scene in another movie and paste it in there.

    Adesi wrote:
    > How do you copy frames from one movie to another in
    Flash 8?
    >
    > I found this one, but it does not work on Flash 8.
    >
    http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_12863
    >
    > I want to copy the contents of a scene from one movie,
    and then create a scene
    > in another movie and paste it in there.
    you must be doing something wrong, the above tutorial is
    correct and it is the
    only way to copy paste frames in flash.
    Make sure your layers are not locked. Locked layers cant be
    copied.
    Best Regards
    Urami
    <urami>
    If you want to mail me - DO NOT LAUGH AT MY ADDRESS
    </urami>

  • How to move a file from a page to another one in a wiki?

    Is it possible to move a file from a page to another one in a wiki (wiki server 4)?

    Files uploaded via "+" button and "Upload File to "My wiki name"" can be moved just like normal wiki pages by clicking the "sprocket" button and selecting "Move to Wiki"
    Fils attached via the "paperclip" button when editing a page, must be downloaded first, deleted from the initial page and reattached to the new page.

  • If I get a user to enter their name as a variable and I am linking one movie to another using a button, is there a way to carry the user name forward into the second movie?

    If I get a user to enter their name as a variable and I am linking one movie to another using a button, is there a way to carry the user name forward into the second movie?

    Hi there
    See if the link below helps
    Click here
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • About photoshop organizer: how can I shift pictures from one catalogue to another one?

    how can I shift pictures from one catalogue to another one?

    Sync to computer then from there to other device.  Photo stream can be used to sync between devices, but that has to be set up BEFORE the photos are taken.
    Read this...  import photos to your computer...
    http://support.apple.com/kb/HT4083

  • Problems when copying item from a page to another one

    I am copying a value of an item, from a page to another one in branch, and it cuts the value to me in ' : '
    ej: item a = 08:00 Hs
    item b = 08
    thanks
    Juan Pablo

    I had to deal with the same thing and I know at least two solutions - one is "dirty" and the other one is a "clean":
    1. dirty - replace ':' (colon) with ';' (semicolon) and pass that value using URL. On the page, where your item(s) is, create a computation using REPLACE(P1_ITEM, ';', ':') on load and before header.
    2. clean - as Scott says and it works in many cases - pass only a primary key and a request to your target page and create there a procedure to fetch the values you need and populate the items
    If you use the documentation and search on keywords "COMPUTATION" and "REQUEST", you will find a lot of usefull information.
    Denes Kubicek

  • Embed question - play one movie after another

    I am trying to figure out how to play a short 10 second clip before each movie on my website. The clip may be a short ad or a promo and will depend upon the content of the main video. What is the code that enables you to play one move after another in a web page. I don't want to edit the two clips to become one cos over time the ads and promos will change. In Realplayer I remember using SMIL but how is it done in QT. I will eventually write code to write out the Embed tag but now i am just experimenting. Here is what my drupal site puts out
    <!-- start main content -->
    <!-- begin content -->
    <!--[if !IE]> <-->
    <object type="video/quicktime" width="483" height="381"
    data="http://www.1234567.com/files/videos/Mpeg4TestSnapX-480x360.mp4">
    <!--> <![endif]-->
    <!--[if IE]>
    <object classid="clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B" codebase="http://www.apple.com/qtactivex/qtplugin.cab" width="483" height="381" scale="tofit" >
    <![endif]-->
    <param name="src" value="http://www.1234567.com/files/videos/Mpeg4TestSnapX-480x360.mp4" />
    <param name="AUTOPLAY" value="true" />
    <param name="KIOSKMODE" value="false" />
    Your browser is not able to display this multimedia content.
    </object>
    Problems viewing videos?
    Download latest Quicktime Player

    Embed the initial movie clip as normal, but give it an HREF property.
    Set the source for the HREF to be the next movie, set autohref=true, and set target="myself". It's the same technique you use to build a poster movie but (a) instead of having the poster movie open QT Player, you have its target open in its own frame and (b) instead of waiting for a user to click the poster, you have the poster movie "click itself".
    Code that I used a very long time ago to display a "Loading..." graphic as a movie loaded (waste of effort, actually, as the movie is fast start and loads very fast):
    <embed
    src="loading.mov"
    height="208"
    width="256"
    autohref="true"
    href="Worm.mov"
    target="Myself">
    </embed>
    (of course this was before I learned about OBJECT and the need to use OBJECT to activate the ActiveX control in IE. Also, it's worth noting that the javascript hack isn't strictly necessary for IE users, but without it, IE users will get a security dialog before they get the movie.)
    The code above can be found on:
    http://capital2.capital.edu/admin-staff/dalthoff/adventures/worm.html
    --Dave Althoff, Jr.

  • Pass data from one VI to another one

    Hi,
    I try to control a event structure in a VI with a boolean command from a second VI. I have been advised to "build a connector to pass any data from one VI to another one".
    Below an simple example: my goal is MyVItwo gives the result of a 2 numbers addition only when the boolean "MyBooléen" value changes in MyVIone.
    How can I realise this?
    Thanks
    PB
    Attachments:
    Example.zip ‏10 KB

    It is not entirely clear what you are trying to do. I think that what you want is a main vi/subvi setup. The boolean control would be in the main vi and would be monitored by an event structure. When the value of the boolean changes the subvi would be activated. I have attached an example showing how this is done.
    In order to use a vi as a subvi you build a connector box. In order to do this you just right click on the vi icon at the top right of the front panel and select show connector. You then wire connections on the connector block to controls on the front panel. You insert the subvi into your main vi by choosing "Select a vi" on the functions pallette and browsing to the subvi.
    If you absolutely have to pass the data from one vi to another while running in parallel there are a number of ways to do it. Global variables will certainly work but are generally avoided by experienced LabVIEW programmers due to their potential caveats and the break in data flow. An alternative to global variables is the functional global, also called a LV2 style global. This is basically a non-reentrant subvi with an unitialized shift register which allows for data to be stored. For more information search this forum for LV2 globals.
    Another alternative is to obtain a reference to the control and operate on that reference. You could also use queues, notifiers, or occurences. Search the examples which shipped with LabVIEW for examples on using these operators.
    If you need any more information feel free to post back here.

  • I recently transfered everything from my emac to another one but now when I try to open iTunes I get the window that states: The file "iTunes Library" cannot be read because it was created by a newer version of iTunes.

    I recently transfered everything from my emac to another one but now when I try to open iTunes I get the window that states: The file "iTunes Library" cannot be read because it was created by a newer version of iTunes. The computer I transfered to had a bunch of files on it and I got full ownership of what was already there, so, how do I get to my iTunes library, I do have access as an administrator to the iTunes library (that works just fine) already there and I guess I must have had a newer version ofiTunes on my defunt eMac....

    Tell us some version numbers please, of your Mac OS versions and iTunes versions on both computers (two eMacs yes?).
    dlrobinson49 wrote:
    I guess I must have had a newer version ofiTunes on my defunt eMac....
    That is a pretty good guess.Try updating the second eMac's iTunes to at least the version that was on the first.

  • After updating to iOS7 I am trying to log in the Game Center with my  user ID  and it says that is in use and I need to enter another one?

    After updating to iOS7 I am trying to log in the Game Center with my  user ID  and it says that is in use and I need to enter another one?

    You may be able to find your Apple ID at Look up your old and forgotten Apple ID

  • Is it possible to set table-variant from one user to another one?

    Is it possible to set table-variants from a t-code like fb60 from one user to another one?
    I mean that both user have the same table-variants.

    You mean screen variant, where you will need to anter the GL line items in FB50?
    then you can set your desired variant as DEFAULT for all users, when it is configured.
    Else thru SU10, for all of your users, add parameter ID SCRVAR and give your parameter value (screen variant name) and SAVE.

  • Overlay one image over another one.

    Hi,
    I am trying to overlay one image over another one.
    (example ..
    First images 1) This will have complete picture like the passport picture with background
    Second Image 2) This will have some specific parts(background of above) whitened
    Result picture 3) This should have the passport picture with out any background just the person.
    Is this possible using intermedia ??
    Thanks in advance.

    dude, not too sure the dept. of homeland security is going to be cool with doing that.
    unless you can make me a passport from Guam.

  • I click on one song and another one starts playing.  Cover art for one artist shows up on another album.  All of my music isn't showing up.  Please help.  Why is this happening?  How can I fix it?

    I click on one song and another one starts playing.  Cover art for one artist shows up on another album.  All of my music isn't showing up.  Please help.  Why is this happening?  How can I fix it?

    Sorry for not getting back with you...
    That moves only the iTunes media, not the iTunes library (which is really kinda nebulous).
    iTunes library = iTunes folder and all the media, wherever it is located.
    The /Music/iTunes/ folder contains the iTunes library.itl file, which keeps track of everything in iTunes.
    I do however still have the original MAIN startup drive still in the computer, it's just not the startup.
    This is good you still have it.
    Try this...
    Hold Option and launch iTunes.
    Select Choose library... and select the /iTunes/ folder on the original drive. It should be in /Users/your_user_name/Music/.
    Don't mess with anything. We can get it cleared up.
    Does everything work okay?

Maybe you are looking for