Using Styles with HTML

Hi, I've tried an example at livedocs.adobe.com ->
http://livedocs.adobe.com/flash/9.0/main/wwhelp/wwhimpl/common/html/wwhelp.htm?context=Liv eDocs_Parts&file=00000917.html
<- and followed exact steps mentioned in the document but i get
the following two error messages. Your help will be greatly
appreciated.
1046: Type was not found or was not a compile-time constant:
Void.
1046: Type was not found or was not a compile-time constant:
Void.
Note: i'm using CS3 Flash.
Thank you
malik

Try changing the two uses of Void to void (lower case
v).

Similar Messages

Howto use java with html

Hi,
I have got following project :
an axis webcam displays an image thanks to http protocol
at the right of my image, I have to create a panel with some java controls.
I would like some hints on howto do this?
Do I need a to setup a web server or is it possible to do this using a single html file loaded in my browser ?
Best Regards
Steph

At best you can load an applet in a html page (the other possibility is to use servlets and JSP's to do server side processing, which is most likely not what you want to do).
But what do you want to do with these "java controls"?

Junk characters display while using multipart with html content in Javamail

Hi All,
I have used Java mail API to send mail with attachment. To enable to attachment in mail and to do content formatting i have used multipart and html content type together.
My web application runs on apache tomcat 5.5 in MAC server. Java version is 1.5.
The Function which i have used for sending mail with attachment is as follows:
public void sendmailAttached(String to,String from,String host,boolean debug,String mailContent,String mailSubject,String cc,String attachFiles)
          String mailarray[]=to.split(";");
          Properties props = new Properties();
          //props.put("mail.smtp.port","425");
          props.setProperty("mail.smtp.host", host);
          if (debug) props.setProperty("mail.debug", ""+debug);
          Session session = Session.getInstance(props, null);
          session.setDebug(debug);
          try {
               Message msg = new MimeMessage(session);
              msg.setFrom(new InternetAddress(from));
             javax.mail.internet.InternetAddress[] toAddress=new javax.mail.internet.InternetAddress[mailarray.length];
             for (int i=0;i<mailarray.length ;i++ )
                                        toAddress=new javax.mail.internet.InternetAddress(mailarray[i]);
          msg.setRecipients(Message.RecipientType.TO, toAddress);
          msg.setSubject(mailSubject);
          try{
                    String ccaray =cc;
                    String mailarray1[]=ccaray.split(";");
                    javax.mail.internet.InternetAddress[] CCAddress=new javax.mail.internet.InternetAddress[mailarray1.length];
     for (int i=0;i<mailarray1.length ;i++ )
     CCAddress[i]=new javax.mail.internet.InternetAddress(mailarray1[i]);
          msg.setRecipients(Message.RecipientType.CC,CCAddress);
          }catch(Exception ss)
                    System.out.println("CC mail exception is ====>"+ ss.getMessage());
          msg.setSentDate(new java.util.Date());
          Multipart multipart = new MimeMultipart("related");
          BodyPart messageBodyPart = new MimeBodyPart();
          messageBodyPart.setContent(mailContent, "text/html");
          multipart.addBodyPart(messageBodyPart);
               String fileName = attachFiles.substring(attachFiles.lastIndexOf("/")+1,attachFiles.length());
               if(!fileName.equals(""))
                    messageBodyPart = new MimeBodyPart();
          DataSource source = new FileDataSource(attachFiles);
          messageBodyPart.setDataHandler(new DataHandler(source));
          messageBodyPart.setFileName(fileName);
          multipart.addBodyPart(messageBodyPart);
          msg.setContent(multipart);
          Transport.send( msg );
          catch(MessagingException mex)
               Exception ex = mex;
               if (ex instanceof SendFailedException)
               SendFailedException sfex = (SendFailedException)ex;
Address[] invalid = sfex.getInvalidAddresses();
if (invalid != null) {
if (invalid != null) {
for (int i = 0; i < invalid.length; i++)
System.out.println("Invalid Addresss --------> " + invalid[i]);
try
     Message msg = new MimeMessage(session);
          msg.setFrom(new InternetAddress(from));
          Multipart multipart = new MimeMultipart("related");
     BodyPart messageBodyPart = new MimeBodyPart();
     messageBodyPart.setContent(mailContent, "text/html");
multipart.addBodyPart(messageBodyPart);
Address[] validUnsent = sfex.getValidUnsentAddresses();
javax.mail.internet.InternetAddress[] toAddress=new javax.mail.internet.InternetAddress[validUnsent.length];
if (validUnsent != null) {
for (int i = 0; i < validUnsent.length; i++)
System.out.println("Valid Address ------>"+validUnsent[i]);
String test = validUnsent[i]+"";
toAddress[i]=new javax.mail.internet.InternetAddress(test);
msg.setRecipients(Message.RecipientType.TO, toAddress);
msg.setSubject(mailSubject);
String fileName = attachFiles.substring(attachFiles.lastIndexOf("/")+1,attachFiles.length());
               if(!fileName.equals(""))
                    messageBodyPart = new MimeBodyPart();
          DataSource source = new FileDataSource(attachFiles);
          messageBodyPart.setDataHandler(new DataHandler(source));
          messageBodyPart.setFileName(fileName);
          multipart.addBodyPart(messageBodyPart);
msg.setContent(multipart);
Transport.send( msg );
catch(Exception e)
     System.out.println("Mail Not Send");
          else
                    System.out.println("Mail Server Not Connectd ");
This code is working properly and i am able to send mail with attachment and html formatted content without any problem. But console of server is filled up with too much junk characters because of which the catalina.out file of tomcat server is becoming fully filled.
Sample cosnole display with junk characters are as follows:
Subject: HBSP - DRUCKER - QC - CH16 - QC R2 Completed
MIME-Version: 1.0
Content-Type: multipart/related;
     boundary="----=_Part_34_15681668.1247471518887"
------=_Part_34_15681668.1247471518887
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit
<b>Hi,</b><br><br>     Chapter CH16 in the project DRUCKER is Completed . <br><br>     <b>Comments :</b> Qc Accepted.<br><br> <b><i>Thanks,<br>ANTONY.</i></b>
------=_Part_34_15681668.1247471518887
Content-Type: application/octet-stream; name=9420317_CH06_p084-119.pdf.zip
Content-Transfer-Encoding: base64
Content-Disposition: attachment; filename=9420317_CH06_p084-119.pdf.zip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 this display of junk characters are filling up multiple pages of console file.
Can any one suggest me how to overcome this problem?
Many thanks in advance.

There is no "sendmail" method in the JavaMail API.
The debug flag is set using the Session.setDebug method, or by setting the Session property "mail.debug".
If you're using someone else's helper classes with JavaMail, they may provide another way to set it.

Using SSI with html page

I've got several html pages that I made to use SSI's. The code would go like:
<div class="footer">

<div class="clr"></div>
But when I preview the page on the server, it's not showing the code. If I bypass the SSI and paste the html code in directly it shows.
I'm sure the path is correct. I can browse to it and I've also tried putting in the whole url just incase DW's Insert messed up.
Inserting SSI's works fine with php files, but when I try it in htm files I can't get it to work.
Is there something I'm doing wrong?

Also, change this

to this:

Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Using Styles With the ComboBox

Hi --
I believe I have posted a question similar to this before,
but can someone
tell me how to go about styling a ComboBox via Actionscript
3?
I found this list for AS 2 in the help file:
alternatingRowColors, backgroundColor,
backgroundDisabledColor, borderStyle
color, disabledColor, embedFonts, fontFamily, fontSize,
fontStyle,
fontWeight, textAlign,
textDecoration, textIndent, defaultIcon, repeatDelay,
repeatInterval,
rollOverColor,
selectionColor, selectionDuration, selectionDisabledColor,
selectionEasing,
textRollOverColor,
textSelectedColor, useRollOver
However, when I tried this code:
testCombo.textField.setStyle("backgroundColor",0xcc00cc);
or
testCombo.dropdown.setRendererStyle("backgroundColor",0xcc00cc);
it didn't work.
Can someone tell me which of the items in the list above (if
any?) work with
AS 3 and what other options are also available?
Thanks
Rich

I believe setStyle is the method of the component
(UIComponent) - not it's children.
ComboBox.textField is a reference to the TextField of the
component. As such it seems like it should be styled with
methods/properties that TextField class has (setting StyleSheet,
etc.)
To get what elements of the component can be styled you can
use getStyleDefinition on the component.
http://livedocs.adobe.com/flash/9.0/ActionScriptLangRefV3/fl/core/UIComponent.html#setStyl e()

Using policy with html code

I have created policy for permissions for the applet to comunicate over sockets...how to get it to access that policy file from inside the html code
example html
<center><applet code="CBJGUI.class" width="675" height="510"></center>
</applet>
example cmnd line to load with policy thru applet viewer
appletviewer -J-Djava.security.policy=CBJper CBJv.1.0.htm
please help....so close I can smell it

I have exactly the same doubt.
I read somewhere that you might need to change the java.security file in the {java installation}/jre/lib/ file. I added the grant permission lines to it too. Still it doesnt work.
If i run the same application by passing the security policy thru the command line and run the applet thru appletviewer then the same application works.
How to get it to work through the browser though?
Please reply soon.

DW crashes when I use PHP and HTML

Hi, I need to use PHP with DW to validate a form.
However, when I use PHP with HTML DW crashes. I use a PHP
script to to select the correct radio button when the form is
submitted (see below).
It works fine in the browsers and I can even edit in Notepad.
I am not sure how to solve this - I altered the DTD from
strict to transitional (it didn't work). I am using the latest
version of DW CS3.
Any ideas?
<dt>How did you find out about the site?</dt>
<dd>
<label for="how_did_you_find_out_about_the_site1">
<input name="how_did_you_find_out_about_the_site"
id="how_did_you_find_out_about_the_site1" type="radio"
value="Link_from_another site" <?php echo
($_POST["how_did_you_find_out_about_the_site"] ==
"Link_from_another site") ? "checked=checked" : "";?> />
Link from another site</label>
</dd>
<dd>
<label for="how_did_you_find_out_about_the_site2">
<input name="how_did_you_find_out_about_the_site"
id="how_did_you_find_out_about_the_site2" type="radio"
value="Read_about_it_in a_booklet_or_card" <?php echo
($_POST["how_did_you_find_out_about_the_site"] == "Read_about_it_in
a_booklet_or_card") ? "checked=checked" : "";?> />
Read about it in a booklet/card</label>
</dd>
<dd>
<label for="how_did_you_find_out_about_the_site3">
<input name="how_did_you_find_out_about_the_site"
id="how_did_you_find_out_about_the_site3" type="radio"
value="Recommended_by_my tutor" <?php echo
($_POST["how_did_you_find_out_about_the_site"] ==
"Recommended_by_my tutor") ? "checked=checked" : "";?> />
Recommended</label>
</dd>
<dd>
<label for="how_did_you_find_out_about_the_site4">
<input name="how_did_you_find_out_about_the_site"
id="how_did_you_find_out_about_the_site4" type="radio"
value="Found_it_when_I_used_the_search" <?php echo
($_POST["how_did_you_find_out_about_the_site"] ==
"Found_it_when_I_used_the_search") ? "checked=checked" : "";?>
/>
Found it when I used the search</label>
</dd>
<dd>
<label for="how_did_you_find_out_about_the_site5">
<input name="how_did_you_find_out_about_the_site"
id="how_did_you_find_out_about_the_site5" type="radio"
value="Other" <?php echo
($_POST["how_did_you_find_out_about_the_site"] == "Other") ?
"checked=checked" : "";?>/>
Other</label>
<label
for="how_did_you_find_out_about_the_site6">(please specify)
<input name="how_did_you_find_out_about_the_site_specify"
id="how_did_you_find_out_about_the_site6" type="text"
value="<?php echo ($_POST["how_did_you_find_out_about_the_site"]
== "Other") ? $_POST["how_did_you_find_out_about_the_site_specify"]
: "";?>"/>
</label>
</dd>

Steve84 wrote:
> Hi, I need to use PHP with DW to validate a form.
>
> However, when I use PHP with HTML DW crashes.
http://www.adobe.com/go/kb402776
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Zoomify embedding with HTML Snippet?

Can you use Zoomify with HTML Snippet in iWeb '08? I can't seem to make it work.

I have placed a Zoomify an my site and there i explaned how to do this
1.If you are ready in Photoshop and have exported the file you’ll find a web-page with the name filename.html and a map that’s called filename_img. Open the HTML page with software like Taco HTML Edit. (Freeware)
2.Select al the code and copy it.
3.Go to the web-page in iWeb where you want Zoomify, choose webwidget and paste in the HTML.
4.Publish your site.
5.If finished, open your iDisk and open the map with your page name (path iDisk(your name)/web/your site name/your page name)
6.Copy the map filename_img to the map called as the page name. This can take some time
Take a look on this page: http://web.mac.com/guy.beckers1/mediainbelgium/Home.html

How to create and use Data Vault with HTML/JavaScript (SAPUI5) for Mobile Apps?

Hello,
I am creating a demo Enterprise Mobile App, for cross platform and I want to use the Data Vault.
I am not able to figure out how to implement the Data Vault with HTML/JavaScript i.e. SAPUI5 for cross platform mobile apps I have a tutorial, but it is for Android based apps. Where as I want it for iOS as well. I guess, in this case, implementing the Data Vault using SAPUI5 over HTML and JavaScript would be better.
If anyone has any links or sample code to implement Data vault in HTML/JavaScript (SAPUI5) or specific for iOS apps, it would be great.
Thank you.

Hi,
This is the "SAP Mobile Documents" community, so this seems to be the wrong place for asking your question related to Data Vault / SAPUI5.
Maybe you should post your question here: http://scn.sap.com/community/developer-center/front-end.
best regards,
Ingo

Report on Leave request (with HTML ) using ITS version

we are using ITS version of ESS and MSS version EP 6.0 and SAP R/3 5.0.
Our client wants a report on Leave Request(with HTML). the worflow used is WS20000081. my question is there any standard report to check the Leave Request which are approved or rejected. In SAP there is one standard report
RPTARQDBVIEW where in when we execute no output exists.
Please help me whether is there any report to view the leave requests.
Regards
Santosh Ghanwar

Dear Claude;
Thanks for your kind assistance... I was out for sometime & got up in some other urgent tasks...
Sorry for delay...
I had created the loop Payroll? with following conditions
&Employee.ControlRecordState&     =          1     or
&Employee.ControlRecordState&     =           2     or
&Employee.ControlRecordState&   =          3     or
&Employee.ControlRecordDate&     <           %Current Date%
but result is always "True"
Please help me out...
Best Regards,

How can I use javascript in a Text Area with HTML editor??

My question is... how can I use javascript in Text Area with HTML editor??
I can use javascript functions that change the content of Text Areas but i can´t if i try in text area with html editor....
I need to limit number of characters in a text area with html editor and i can´t.
could anybody help me please?

I have been experiencing similar problems with the HTML Editor and have managed to find an answer that should start to answer some of my questions. The Apex HTML Editor Standard is actually an HTML editor called FCKeditor. The FCKeditor has a Javascript API that can be found at http://docs.fckeditor.net/FCKeditor_2.x/Developers_Guide/JavaScript_API. Unfortuately this doesn't seem to give the whole answer and I found more at http://www.houseoffusion.com/groups/cf-talk/thread.cfm/threadid:49607.
I needed to get the text entered within my html editor standard (e.g. P1_MYTEXT) and use it within my javascript function. I did this by using the following script
<script language="JavaScript" type="text/javascript">
function showtext(){
var oEditor = FCKeditorAPI.GetInstance('P1_MYTEXT');
var editortext = escape(oEditor.GetXHTML(oEditor.FormatOutput));
alert(editortext);
</script>
Hope this helps.
Matthew

Use of javascript and textarea with HTML editor

Hi all,
I have been trying to use some onchange javascript in the HTML Form Element Attributes of an item which is a textarea with an HTML Editor. It just seems to ignore the code. When you "view source" the code does not seem to be there.
What I am attempting to do is described in thread: detecting changes to items prior to submitting page
i.e. to warn a user that if they leave the page without saving they will lose their changes. It works fine with most of the other items on the page i.e. text boxes, select lists but not the textarea with html editor.
Is there somewhere else I should be putting my js for items of this type? I have spent some time looking through the forum posts but cannot find an answer so far.
Thanks,
Brian

I'm having the same problem.
Would like to use the onChange event in a textarea with html editor.
This works in Firefox (where I don't get the html editor but only a textarea) but doesn't seem to work in IE.
Is there another way of detecting the user has changed the text in the html editor?
Thanks,
Pieter

Using 2 different databases in Oracle 9i with HTML DB

I'm new to appex and I am wondering if I can use it to use data from different databases within Oracle 9i, and if so, how/where can I find out to do it. Basically I have an already existing database in 9i, and I have to create another one that uses information from one table in that original database. I have to somehow link it to the new tables (to use the live data from the original db) to filter data. Then ultimately make use of the collaborated information with HTML DB. Any and all help/suggestions is more than greatly appreciated.
Thanks!

I'm new to appex and I am wondering if I can use it to use data from different databases within Oracle 9i, and if so, how/where can I find out to do it. Basically I have an already existing database in 9i, and I have to create another one that uses information from one table in that original database. I have to somehow link it to the new tables (to use the live data from the original db) to filter data. Then ultimately make use of the collaborated information with HTML DB. Any and all help/suggestions is more than greatly appreciated.
Thanks!

Using colspan with nested html tables

Please see my question on stackoverflow at:
using colspan with nested html tables - Stack Overflow

You should be posting in the Dreamweaver forum. This is not a design
question as such is it? Dreamweaver forum is the most busiest forum on
Adobe portal and you are very likely to get the response and a solution
almost quickly.
<https://forums.adobe.com/community/dreamweaver>
Good luck.

Servlet with HTML using JDBC lookup

          Dear Friends
          How are you?
          I am designing a servlet with two drop down lists one on top and the other below.
          I implemented drop down lists using dynamic embedded HTML and SELECT tags.
          I want the user to make a selection in the first drop down list, and the second
          drop down list should display a list based on the selection made in the first
          drop down list.
          Please comment in detail on the most efficient way of achieving this.
          Thanking you
          Very truly yours
          Sriram (Ram) Peddibhotla, PhD


For this I'd probably load all the values for both drop down list and use
          javascript.
          Tinou Bao
          www.tinou.com
          "Sriram (Ram) Peddibhotla" <[email protected]> wrote in message
          news:3b181cd0$[email protected]..
          >
          > Dear Friends
          >
          > How are you?
          >
          > I am designing a servlet with two drop down lists one on top and the other
          below.
          > I implemented drop down lists using dynamic embedded HTML and SELECT tags.
          >
          > I want the user to make a selection in the first drop down list, and the
          second
          > drop down list should display a list based on the selection made in the
          first
          > drop down list.
          >
          > Please comment in detail on the most efficient way of achieving this.
          >
          > Thanking you
          > Very truly yours
          > Sriram (Ram) Peddibhotla, PhD

Using Styles with HTML

Similar Messages

Maybe you are looking for