Using SXPG_CALL_SYSTEM to execute Unix 'MV' command not working

Here is the code (method - params begin with "p_"). This returns no error but yet the file is not moved (called in a test program). Any ideas?
DATA: lv_sourcepath TYPE rlgrap-filename,
        lv_targetpath TYPE string,
        lv_fname      TYPE rlgrap-filename,
        lv_path       TYPE rlgrap-filename,
        lv_paramstr   TYPE sxpgcolist-parameters,
        lv_status     TYPE extcmdexex-status,
        lv_execproto TYPE TABLE OF btcxpm.
" Get physical path to archive folder
lv_targetpath = zcacl001_utilities=>get_appserver_path( 'ZDIR_KHRIS_INTF_ARCV' ).
" Type casting needed for function module call below
lv_sourcepath = p_sourcepath_in.
" Split filename from path in source
zcacl001_utilities=>parse_file_path( EXPORTING
                                          p_fullname_in   = lv_sourcepath
                                       IMPORTING
                                          p_filename_out = lv_fname
                                          p_path_out      = lv_path ).
" Concatenate filename to target path
CONCATENATE lv_targetpath lv_fname INTO lv_targetpath.
" Build parameter string
CONCATENATE '-f' lv_sourcepath lv_targetpath INTO lv_paramstr SEPARATED BY space.
CALL FUNCTION 'SXPG_CALL_SYSTEM'
    EXPORTING
      commandname                = 'mv'
      additional_parameters      = lv_paramstr
      trace                      = space
    IMPORTING
      status                     = lv_status
      exitcode                   = p_exitcode_out
    TABLES
      exec_protocol              = lv_execproto
    EXCEPTIONS
      no_permission              = 1
      command_not_found          = 2
      parameters_too_long            = 3
      security_risk                  = 4
      wrong_check_call_interface = 5
      program_start_error            = 6
      program_termination_error      = 7
      parameter_expected         = 8
      too_many_parameters            = 9
      illegal_command                = 10.

Try to put this type of entry in the Object request.
Prog Obje Objectname
R3TR EXCC commandname
I am not sure, weather this will work or not.
Regards,
Naimesh Patel

Similar Messages

Why is my BDC_CURSOR command not working to position the cursor?

Why is my BDC_CURSOR command not working to position the cursor? Here are the details regarding my issue.
I am writing a BDC to mass delete routing material assignments using transaction CA02. I am OK to navigate through the initial screen to go to the Header screen and from here I am OK to navigate to the Material Assignments screen. But once here, I cannot get the BDC_CURSOR command to take me into the list. Here are the commands I am using. Please let me know what I may try differently.
CA02 Material Assignment - Set position <-- this resets list of materials to correct position
PERFORM bdc_dynpro      USING 'SAPLCZDI'   '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR' 'RC27X-ENTRY_ACT'.
PERFORM bdc_field       USING 'BDC_OKCODE'   '=ENT1'.
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT' c_position.
CA02 Material Assignment - Delete
PERFORM bdc_dynpro      USING 'SAPLCZDI'   '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR' 'MAPL-MATNR(01)'.    <-- this is not working to set the cursor into the list
PERFORM bdc_field       USING 'BDC_OKCODE' '=LOE'.             " trash can
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT' c_position.
CA02 Material Assignment - Green Check OK
PERFORM bdc_dynpro      USING 'SAPLCZDI'   '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR' 'RC27X-ENTRY_ACT'.
PERFORM bdc_field       USING 'BDC_OKCODE'   '=BACK'.            " check mark
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT' c_position.

Thank you for your reply.
I had used SM35 to record. However, I was not aware of the "create program" feature. I had commented out a section from my previous post which I have now added back (latest code below). But it still did not resolve the issue.
When I execute with dismode = 'N', I get back error message "No batch input data for screen SAPLCZDI 1010".
When I execute with dismode = 'E' (only show dynpros when error), it stops at the material selection screen without placing my cursor in the list. I can then MANUALLY click to set the cursor position in the list, MANUALLY click the trashcan, it then uses my BDC command to respond to the popup asking "Do you want to delete", still leaving me at the material selection screen. I can then MANUALLY click the green check (or enter), then it continues with the BDC to go back to the previous screen, and saves. But it still will not place my cursor in the material selection list (SAPLCZDI screen 1010).
Here is code used. It is the second section of code labeled "CA02 Material Assignment - Delete" that is not working.
CA02 Material Assignment - Set position
this code functions to position the desired material to first in screen list
PERFORM bdc_dynpro      USING 'SAPLCZDI' '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'RC27X-ENTRY_ACT'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=ENT1'.
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT'
                                 c_position.
CA02 Material Assignment - Delete
PERFORM bdc_dynpro      USING 'SAPLCZDI' '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'MAPL-MATNR(01)'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=LOE'.             " trash can
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT'
                                 c_position.
Acknowledge Pop-Up Screen
PERFORM bdc_dynpro      USING 'SAPLSPO1' '0100'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=YES'.
CA02 Material Assignment - Green Check OK
PERFORM bdc_dynpro      USING 'SAPLCZDI' '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'RC27X-ENTRY_ACT'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=BACK'.            " check mark
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT'
                                 c_position.

Alt ctrl c shortcut command not working in photoshop cc, it is opening Internet explorer (IE)

In Photoshop CC 2014 Alt + Ctrl + C ( to open for canvas size dialog box ) command not working, it is opening Internet Explorer (IE)

What version of windows are you using?
See if the Internet Explorer shortcut has that keyboard shortcut assigned to it.

Bash commands not working after upgrade to Lion

After upgrade, many BASH commands not working. For example, such a fundamental thing as "ls".
iMac20:bin a$ ls
Launch of "ls" failed: the PowerPC architecture is no longer supported.
What does it have to do with PowerPC? My computer is 2.66 GHz Inter Core Duo

Linc,
iMac20:~ a$ which ls
/sw/bin/ls
Also, I managed to look (using tcsh's ls-F command) into the contents of /usr/. Here's what I see there:
[iMac20:/bin] a% ls-F
[*          csh*        echo*       ksh*        mkdir*      rcp*        stty*       wait4path*
bash*       date*       ed*         launchctl* mv*         rm*         sync*       zsh*
cat*        dd*         expr*       link*       pax*        rmdir*      tcsh*
chmod*      df*         hostname*   ln*         ps*         sh*         test*
cp*         domainname* kill*       ls*         pwd*        sleep*      unlink*

Odi os command not working with agentservice agent.

dear all,
odi os command not working with agentservice agent but with local agent it work fine.. and user is administrator.
kindly solve it
Regards
Naseer

Hi,
you referred to oscommand, so are you executing a .bat fille? if yes, where exactly does the .bat file reside, local machine or on network share?
Also, follow these couple of documents, they may be helpful to you.
859215.1 and 424703.1
Regards
Srikanth

Crontab reboot command not working

Crontab reboot command not working
Greetings
I am new at this so excuse any ignorant mistakes I might be making.
I have a server (MM X.4.9) that I would like to restart every day in order to make sure no programmes are hanging etc. If a program is hanging is should force quit it. Using terminal I have entered the following command:
sudo nano /etc/crontab
Entered password
Than I entered using tab between each sequence:
15 13 1 1 * root reboot
This was a test run and it did not reboot.
Entering
cat /etc/crontab
I got:
# The periodic and atrun jobs have moved to launchd jobs
# See /System/Library/LaunchDaemons
# minute hour mday month wday who command
15 13 1 1 * root reboot
What have I done wrong?
Thanks

Hehe, there you are experimenting with a "reboot" cron command and you are surprised it quit so fast. You are not going to find a "graceful" solution to shutdown dialogs.
MSWord is a Java app, so it is especially important for the command to work that it doesn't get hung up on outer layers of the system. Especially stupid apps that use Java which is not well integrated. I believe Word has a 5 minute autosave, so you should be able to recover most of your document.
This reboot command should be running around 2AM, when the average webserver has minimum traffic. If you feel the need to reboot during busier times of the day, I'd suggest you look at what's causing your applications to crash.

Illustrator Short Commands Not Working

Hi Team,
My illustrator CS6 short commands have stopped working.
Any time I try to use any CMD + Key, illustrator will not react.
This has been on going for a few months, I have tried resetting preferences but nothing has changed.
If someone could please help.
Thanks,
Brandon

Hi Jacob,
I have tried resetting preferences and few other options.
Anytime I press the CMD key the option at the bottom just changes from selection to direct selection, if that helps.
Should I uninstall and reinstall illustrator?
I no longer have my access key.
Thanks,
Brandon
Date: Wed, 8 Jan 2014 15:39:58 -0800
From: [email protected]
To: [email protected]
Subject: Illustrator Short Commands Not Working
    Re: Illustrator Short Commands Not Working
    created by Jacob Bugge in Illustrator - View the full discussion
THS,
You may try the following (you have tried/done some of them already) and see whether it helps (the following is a general list of things you may try when the issue is not in a specific file; 3) and 4) are specifically aimed at possibly corrupt preferences):
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press CtrlAltShift/CmdOptionShift during startup (easy but irreversible);
4) Move the folder Other options (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5994475#5994475
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5994475#5994475
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5994475#5994475. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Illustrator at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Locate command not working

On every mac computer that I have used that is running 10.9 or greater, I cannot seem to get the UNIX locate command to work. When first run, it gave me an option to generate the locate database, which I did, but for whatever reason, whenever I try locating a file that I know exists, it doesn't return any results.

sudo launchctl load -w /System/Library/LaunchDaemons/com.apple.locate.plist

I have spent the last hour trying to upgrade my Iphone using ITunes. Now, my phone will not work at all. I think the backup is on my computrer, but it appears now to upload. What to do?

I have spent the last hour trying to upgrade my IPhone to IOS 7 using ITUnes. Now, my phone wil not work at all. I think it is backed up on my computer, but I am unable to get it to download to the phone. What to do?

Thanks, as it still will not work, I assume it is damaged and needs to be sent in for repairs.
Tim

I am using chat-r wireless and facetime is not working but when i put rogers fido or any other carrier sim in it work. Anyone know what the problem?

I am using chat-r wireless and facetime is not working but when i put rogers fido or any other carrier sim in it work. Anyone know what the problem?

I'm guessing it's a compatibility problem similar to that that T-Mobile in the US has. I'm not familiar with chat-r wireless, but I'm guessing it's not a supported carrier for the iPhone. If they can't tell you how to fix it, I'm guessing it's just plain not going to work.

I have a iphone 5 and I can login with my apple id to purchase music. However, when I try to login into icloud using the very same username and password that I use in the apple store it does not work to enter icloud, so what what gives???

I have a iphone 5 and I can login with my apple id to purchase music. However, when I try to login into icloud using the very same username and password that I use in the apple store it does not work to enter icloud, so what what gives???

I could do that, however when I select the icloud button (or whatever the heck it is) I am asked to enter the apple id and password. So if you are suppose to create another one for icloud you'd think it would give you the option at this point which would be logical.

Plugin created using C++ 6 and Acrobat 6 SDK Not Working in Windows

I have an Acrobat plugin compiled in Visual C++ 6 using Acrobat 6 SDK. The plugin works flawlessly in Acrobat versions 6 to 9 in Windows XP. While the plugin is able to add a menu iterm and tool bar icon in Windows 7, it causes Acrobat to hang everytime when activated in which event I have to close Acrobat. Since Visual C++ 6 is a 32 bit app, I have to believe that Acrobat 6 SDK is responsible for the behavior described herein in attempting to get the plugin to work in Windows 7. Any comments or suggestions regarding what Visual C++ version to use along with the appropriate Acrobat SDK to get the plugin to work in Windows 7 are appreciated. In doing so, I would also be interested in knowing what backward compatibility one may expect w/regard to previous versions of Acrobat in updating the plugin to work in Windows 7. As for the answer, correct me if I am wrong but I'm thinking Acrobat 9.

Adobe hasn't supported Acrobat 6, VC6 or the Acrobat 6 SDK for at least 5 years. You will need to move to the Acrobat 9 SDK if you wish support.
And Acrobat 9 and its SDK are fine with Windows 7.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Thu, 1 Dec 2011 01:15:42 -0800
To: Leonard Rosenthol
Subject: Re: Plugin created using C++ 6 and Acrobat 6 SDK Not Working in Windows Plugin created using C++ 6 and Acrobat 6 SDK Not Working in Windows
Plugin created using C++ 6 and Acrobat 6 SDK Not Working in Windows
created by gomfp49<http://forums.adobe.com/people/gomfp49> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4056529#4056529

HT201320 I have ne iphone 5, i been setting my email using AT&T global but it is not working, please help me on the correct configuration

I have ne iphone 5, i been setting my email using AT&T global but it is not working, please help me on the correct configuration

Contact the email provider and obtain the correct setup information.

I am using Ubuntu; iTunes installed via wine is not working properly. So how should i sync my apps on iTunes and device? When will iTunes come to Ubuntu

I am using Ubuntu; iTunes installed via wine is not working properly. So how should i sync my apps on iTunes and device?
When will iTunes come to Ubuntu?

See:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.org/kb/Firefox+crashes
If you have submitted crash reports then please post the IDs of one or more recent crash reports that have this format:
*bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
You can find the IDs of the submitted crash reports on the <i>about:crashes</i> page.
*You can open the <b>about:crashes</b> page via the location bar, like you open a website, or open this page via "Help > Troubleshooting Information".
See:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter
*https://support.mozilla.org/kb/Mozilla+Crash+Reporter

Im trying to listen to a book and it keeps telling me I need to enter my audible account username and password. I used my apple id and it is not working anyone know what to do?

Im trying to listen to a book we downloaded from amazon. When we click on it it says we need to enter out audible username and password. I used my apple id username and password and it says it is not correct. I reset this and used it again and it still does not work. Any ideas?

Launch iTunes. From the menu bar click Store / View My Account then click Edit Payment Information.
Make sure the Security Code for you credit card is available and the expiration date is correct, then click Done.

Using SXPG_CALL_SYSTEM to execute Unix 'MV' command not working

Similar Messages

Maybe you are looking for