Using TabbedTextOut function to output text, the text will be truncated

In standard C++, I am using 'TabbedTextOut()' function to output text.
My application calls the function more than once with the parameter 'nTabOrigin' set to the same value each time. So that
I call 'TabbedTextOut' function several times for a single line.
Such as I output text 'jumpto A', firstly I output 'jumpto' by using ''TabbedTextOut(...)', then I output ' A' by using 'TabbedTextOut(...)'.
But I found that the character 'o' had been truncated. When the font was set 10, the phenomenon was obvious. Is it a bug of this API?

It's OK for me, could you share your code snippets?
Best Regards,
Please remember to mark the replies as answers if they help

Similar Messages

Any function module to translate the text

Hi all,
I have a requirement like, in the report i have to display the headings according to languages chosen
dynamically.
let me know is there is any process or Function module to translate the texts.
Regards,
Madhavi

Hi,
you can use SE63 for translating
or use
FM 'TRANSLATE_TEXT_TEXTLOG'.
And also 'SKTZ_TRANSLATE_TEXT_TEXTLOG'
Regards,
Flavya

HT204387 Has anyone used their ip4 or higher with the text messaging sync system in the new ford cars it is call map

Has anyone used their ip4 or higher with the text messaging sync system in the new ford cars it is call map

Send this to:
newsgroups.bea.com / security-group.

When i go to send a new text, the text field isn't blank. There is already text entered in the message body.

When i go to send a new text, the text field isn't blank. There is already text entered in the message body that I have to go in and delete before typing my new text. this prevents me from forwarding anything through text because if I get something I wish to forward, selecting forward as an option always brings up the same junk just like when trying to send a new message. How can i remedy this?

Here it goes -
1) Download iBackupBot: http://download.cnet.com/iBackupBot/3000-2141_4-10969873.html
2) Plug phone into computer and run backup
3) Use "Explorer" box to find Messages: HomeDomain/Library/SMS/Drafts/(null).draft/
4) In "Null Drafts" there is a file "message.plist"
5) Double click to open, (cancel the popup if you did not purchase the iBackupBot) and you will see the prepopulating message on the <string> line 6
6) Delete the offending text, leave all code
7) Close text editor
8) Right click on message.plist file and select "Restore selected item(s) to device"
9) File will be restored to your phone and it will restart itself.
10) Voila! Now it is time to consider that Windows phone....:)

When are we going to be able to use full functions on siri in the UK?

when are we going to be able to use full functions on siri in the UK?

All Apple has stated it that more countries will be added in 2012.

I have a "company provided Ipad" now using IOS 6.1.3. the company Will allow me to upgrade to IOS 7 but not to IOS 8. Is that possible?

I have a "company provided Ipad" now using IOS 6.1.3. the company Will allow me to upgrade to IOS 7 but not to IOS 8. Is that possible?

No, since the iPad 2 is iOS 8 compatible it can only be updated to iOS 8. Apple does not support upgrading to interim iOS versions, and removes those files from the servers when a new version is released. The only path for that iPad 2 is iOS 8.0.2.

I5 still using ios6 as of last night the phone will not connect to my Internet, in settings it says connected with the check mark however there is no wifi icon at the top of phone, have done everything possible to resolve... My i4 and pads are fine,

I5 still using ios6 as of last night the phone will not connect to my Internet, in settings it says connected with the check mark however there is no wifi icon at the top of phone, have done everything possible to resolve... My i4 and pads are fine, I've had this phone for 8 months with no problems until last night , AT&T not any help,apple wants $ I thing it's a software problem.. Any one had this issue?

- Restart the device. http://support.apple.com/kb/ht1430
- Reset the device. (Same article as above.)
- Reset All Settings (Settings > General > Reset > Reset All Settings)
- Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
- Restore as new device. http://support.apple.com/kb/HT4137 For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
- Test the issue after each step. If the last one does not resolve the issue, it is likely a hardware problem.

Why Can't I get my total to output to the text area?

I can get the numbers to go to the text area and to clear the text area but, the only way I have figured out how to output the total is with a JOptionPane. Can someone look at my code and tell me how to fix this?
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class Calculator4 extends JApplet implements ActionListener
String Nums="";
String sNum="";
double Num1=0;
double Num2=0;
double Add=0;
double Subtract=0;
double Multiply=0;
double Divide=0;
int choice=0;
private JTextField displayField;
private JButton Button0, Button1, Button2, Button3, Button4, Button5,
Button6, Button7, Button8, Button9, ButtonAdd, ButtonSub,
ButtonMult, ButtonDiv, ButtonClear, Buttontotal;
public void init()
Container container = getContentPane();
container.setLayout(new FlowLayout());
displayField = new JTextField(15);
displayField.setEditable(false);
container.add(displayField);
Button1 = new JButton("1");
Button1.addActionListener(this);
container.add(Button1);
Button2 = new JButton("2");
Button2.addActionListener(this);
container.add(Button2);
Button3 = new JButton("3");
Button3.addActionListener(this);
container.add(Button3);
ButtonAdd = new JButton("+");
ButtonAdd.addActionListener(this);
container.add(ButtonAdd);
Button4 = new JButton("4");
Button4.addActionListener(this);
container.add(Button4);
Button5 = new JButton("5");
Button5.addActionListener(this);
container.add(Button5);
Button6 = new JButton("6");
Button6.addActionListener(this);
container.add(Button6);
ButtonSub = new JButton("-");
ButtonSub.addActionListener(this);
container.add(ButtonSub);
Button7 = new JButton("7");
Button7.addActionListener(this);
container.add(Button7);
Button8 = new JButton("8");
Button8.addActionListener(this);
container.add(Button8);
Button9 = new JButton("9");
Button9.addActionListener(this);
container.add(Button9);
ButtonMult = new JButton("*");
ButtonMult.addActionListener(this);
container.add(ButtonMult);
Button0 = new JButton("0");
Button0.addActionListener(this);
container.add(Button0);
ButtonDiv = new JButton("/");
ButtonDiv.addActionListener(this);
container.add(ButtonDiv);
ButtonClear = new JButton(" Clear ");
ButtonClear.addActionListener(this);
container.add(ButtonClear);
Buttontotal = new JButton("=");
Buttontotal.addActionListener(this);
container.add(Buttontotal);
public void actionPerformed(ActionEvent actionEvent)
if(actionEvent.getSource() == Button1)
play(getCodeBase(),"Ping.WAV");
if(Nums==null)
{ Nums= "";
displayField.setText("1");}
if(Nums!=null)
{ Nums= Nums + 1;
updateDisplay();}
else if(actionEvent.getSource()==Button2)
play(getCodeBase(),"Ping.WAV");
if(Nums==null)
{ Nums= "";
displayField.setText("2");}
if(Nums!=null)
{ Nums= Nums + 2;
updateDisplay();}
else if(actionEvent.getSource()==Button3)
play(getCodeBase(),"Ping.WAV");
if(Nums==null)
{ Nums= "";
displayField.setText("3");}
if(Nums!=null)
{ Nums= Nums + 3;
updateDisplay();}
else if(actionEvent.getSource()==Button4)
play(getCodeBase(),"Ping.WAV");
if(Nums==null)
{ Nums= "";
displayField.setText("4");}
if(Nums!=null)
{ Nums= Nums + 4;
updateDisplay();}
else if(actionEvent.getSource()==Button5)
play(getCodeBase(),"Ping.WAV");
if(Nums==null)
{ Nums= "";
displayField.setText("5");}
if(Nums!=null)
{ Nums= Nums + 5;
updateDisplay();}
else if(actionEvent.getSource()==Button6)
play(getCodeBase(),"Ping.WAV");
if(Nums==null)
{ Nums= "";
displayField.setText("6");}
if(Nums!=null)
{ Nums= Nums + 6;
updateDisplay();}
else if(actionEvent.getSource()==Button7)
play(getCodeBase(),"Ping.WAV");
if(Nums==null)
{ Nums= "";
displayField.setText("7");}
if(Nums!=null)
{ Nums= Nums + 7;
updateDisplay();}
else if(actionEvent.getSource()==Button8)
play(getCodeBase(),"Ping.WAV");
if(Nums==null)
{ Nums= "";
displayField.setText("8");}
if(Nums!=null)
{ Nums= Nums + 8;
updateDisplay();}
else if(actionEvent.getSource()==Button9)
play(getCodeBase(),"Ping.WAV");
if(Nums==null)
{ Nums= "";
displayField.setText("9");}
if(Nums!=null)
{ Nums= Nums +9;
updateDisplay();}
else if(actionEvent.getSource()==Button0)
play(getCodeBase(),"Ping.WAV");
if(Nums==null)
{ Nums= "";
displayField.setText("0");}
if(Nums!=null)
{ Nums= Nums + 0;
updateDisplay();}
else if(actionEvent.getSource()==ButtonAdd)
play(getCodeBase(),"Ping.WAV");
choice = 1;
sNum="";
sNum = Nums;
Nums=null;
else if(actionEvent.getSource()==ButtonSub)
play(getCodeBase(),"Ping.WAV");
choice = 2;
sNum="";
sNum = Nums;
Nums=null;
else if(actionEvent.getSource()==ButtonMult)
play(getCodeBase(),"Ping.WAV");
choice = 3;
sNum="";
sNum = Nums;
Nums=null;
else if(actionEvent.getSource()==ButtonDiv)
play(getCodeBase(),"Ping.WAV");
choice = 4;
sNum="";
sNum = Nums;
Nums=null;
else if(actionEvent.getSource()==Buttontotal)
play(getCodeBase(),"Ping.WAV");
if(choice==0)
JOptionPane.showMessageDialog(null,"Please Select Operation");
if(choice!=0)
switch(choice)
case 1:
if(Nums!=null)
{    Num1 = Double.parseDouble(sNum);
Num2 = Double.parseDouble(Nums);
double Add = Addition(Num1, Num2);
JOptionPane.showMessageDialog(null,"Your Sum is: " + Add);
sNum = "";
if(Nums==null)
JOptionPane.showMessageDialog(null,"Please Enter Second number");
Nums=null;
break;
case 2:
if(Nums!=null)
{    Num1 = Double.parseDouble(sNum);
Num2= Double.parseDouble(Nums);
double Subtract = Subtraction(Num1, Num2);
JOptionPane.showMessageDialog(null,"Your Difference is: " + Subtract);
sNum = "";
if(Nums==null)
JOptionPane.showMessageDialog(null,"Please Enter Second number");
Nums=null;
break;
case 3:
if(Nums!=null)
{    Num1= Double.parseDouble(sNum);
Num2= Double.parseDouble(Nums);
double Multiply = Multiplication(Num1, Num2);
JOptionPane.showMessageDialog(null,"Your Product is: " + Multiply);
sNum = "";
if(Nums==null)
JOptionPane.showMessageDialog(null,"Please Enter Second number");
Nums=null;
break;
case 4:
if(Nums!=null)
{    Num1 = Double.parseDouble(sNum);
Num2= Double.parseDouble(Nums);
double Divide = Division(Num1, Num2);
JOptionPane.showMessageDialog(null,"Your Quotient is: " + Divide);
sNum = "";
if(Nums==null)
JOptionPane.showMessageDialog(null,"Please Enter Second number");
Nums=null;
break;
else if(actionEvent.getSource()==ButtonClear)
play(getCodeBase(),"Ping.WAV");
displayField.setText("");
Nums=null;
sNum="";
choice=0;
Num1=0;
Num2=0;
public void updateDisplay()
displayField.setText(Nums);
public double Addition(double Num1, double Num2)
return ( Num1 + Num2);
public double Subtraction(double Num1, double Num2)
return ( Num1 - Num2);
public double Multiplication(double Num1, double Num2)
return ( Num1 * Num2);
public double Division(double Num1, double Num2)
return ( Num1 / Num2);
}

You mean something like this:
private int currentNumber =0;
private int total = 0;
private JTextField Display = new JTextField(10);
private JtextField Current = new JTextField(10);
// Add all your buttons correctly
// Try using a GridLayout to make it easier
// blah blah
public void actionPerformed( ActionEvent event )
int number = -1;
String Command = event.getActionCommand();
// Play your sound here.....
doPlaySound();
try
   number = Integer.parseInt( command );
catch( NumberFormatException NFE )
    //ignore
if( number != -1 )
    doIsNumber( number );
    return;   // don't process further
if( command == "Enter" )
    doEnter();
    return;
if(command == "Plus" )
    doPlus();
    return;
// and so on
}//end actionPerformed
private void doNumber( int number )
   String S;
    currentNumber = ( currentNumber * 10 ) + number;
    S = Integer.tostring( currentNumber ); //cant remember if that throws anything
   Current.setText( S ); //Display Work Number
private void doPlus()
    String S;
    total = total + currentNumber;
    currentNumber = 0;
    Current.setText("");
    S = Integer.toString( total );
    Display.setText( S );
private void doEnter()
    total = currentNumber;
    currentNumber = 0;
    Current.setText( "");
    Display.setText( Integer.toString( total ) );
private void doDivide()
     System.out.println("Err you got to be kidding");
}yeh and I'd definitely go for a GridLayout()
4 * 4, with JLabels for the blank filler parts......
So does this help

Help wanted: which class can be used to add some effects on the text

Hi, all:
Does anyone can tell me which Java class can be used to add some effects(e.g. emboss, shadow, underline etc.) on the text which will be printed on the screen?
If you know the class, pls tell me and thanks in advance!
he

hi,
i think you are looking for JTextPane. but that's not all, you have to use document(or inherited classes), Style, StyleConstants, AttributeSet(or inherited classes).
And all this you have to combine.
I wish you much fun :-) and good luck.
regards

Hyperlinked text--the text, not the link--disappears when I create a PDF from a book in FM 11

I am editing a FrameMaker 11 document with some text that is hyperlinked to a website. Earlier PDFs output fine. When I created the last PDF, some of the text disappeared in the PDF, but it's still visible in FM. On the PDF, the hyperlink is active in the blank space and it works to go to the website. Specifically the hyperlinked text is part numbers in a table with a shaded background--I mention this because if I open a page of the defective PDF in Illustrator--the text that has disappeared is behind the shaded square. Some of the hyperlinked part numbers are visible in the PDF--this seems almost random. It's not just part numbers or rows where I have edited something. I'm editing the document, I didn't create it. My background is InDesign and I am a novice in FrameMaker. Appreciate any guidance or suggestions.

Not really sure that I fixed the problem, but I did find a work around and wanted to post it if someone else runs across the same issue. Apparently the document creator used lots of custom rules and shading. If I pulled up the custom rules and shading palette and just unchecked both the custom ruling and shading boxes, it allowed me to create the print file correctly--the disappearing part numbers were on the new PDF. I didn't have to update the whole book which I didn't want to do because I feared it would mess up the rules and shading. Just unchecking the box before creating the PDF solved that issue for my purposes.

My iPhone keeps freezing when I am texting, the keyboard will not come up. I have to turn it off or reset it to get keyboard to come up. How can I fix this?

In text or email, the keyboard will not come up. I have to reset phone or turn it off to get started again. How can i fix this issue?

Hello Jennings Castle,
It seems your iPhone is slowing down and not responding frequently. To rectify this issue you may want to consider performing a restore on the device, and then restoring your data from a backup via iCloud or iTunes.
If the issue persists after restoring your backup, you would then want to consider restoring the device and setting it up as new. Below I have linked to article which offers guidance on both of these restore methods:
How to erase your iOS device and then set it up as a new device or restore it from backups - Apple Support
Thank you for contributing to Apple Support Communities.
Best,
BobbyD

Can I Use HDMI and Thunderbolt Outputs At The Same Time? And Mac App Store Issues

I have a Mid-2011 Mac Mini. I am currently using the HDMI output with an HDMI to Digital Input for a dell monitor. If I wanted to have a second monitor, can I use the Thunderbolt output with a MiniDisplayport to VGA adapter? I know it may sound a little unclear, so if you need a clarification, pelase let me know.
Also, on the same macine, I am having trouble connecting to the Mac App Store. My internet connection is working, and I've tried going into the Keychain Access and there isn't anything with a blue plus. When I go to Store --> Sign In , the sign in widnow doesn't appear.
Thanks
Joey

Yes, that is exactly how to use dual monitors.
Optionally:
if the second monitor has DVI input, use the MiniDisplay Port to DVI adapter.
or if it has Display Port input, then all you need is a straight MiniDisplay Port to Display Port cable.
In Quick Links try Account if Sign In does not work.

When I use "UTF-16" in an OutputStreamWriter, the content will be wrong.

I want to write into a txt file, so I make code as fellow:
FileOutputStream fos = new FileOutputStream("c:\\test.txt", true);
OutputStreamWriter osw = new OutputStreamWriter(fos, "UTF-16");
BufferedWriter bw = new BufferedWriter(osw);
bw.write("TEST 0 1 2 3 4 5 6 7 8 9...");
However, the String in test.txt is
? T E S T 0 1 2 3 4 5 6 7 8 9 . . .
There is a "?" in front of the String...
If I use "CP950" then the content will be correct.
How could I solve the problem?
Thanks.

The encoding in the constructor of OutputStreamWriter must be the one used when the file is read. If you are to read the text file with your default encoding on your OS, then you do not need to invoke the constructor OutputSreamWriter(OutputStream stream, String encodingName) with the double arguments but the constructor OutputStreamWriter(OutputStream stream) with the single argument. Or you can know the default encoding by System.getProperty("file.encoding") which returns a String object which shows your default (text file) encoding.

Remote function module to download the text file

Hi Experts,
I have a requirement of text file should be downloaded from RFC connection by which function module.Can you please tell me whether this method is used to download text file (CALL METHOD cl_gui_frontend_services=>gui_upload).

Hi Jaswanth,
FM used to upload the data from the non sap system to the SAP sytem is the GUI_UPLOAD ans GUI_DOWLOAD is downloading the data from SAP to the presentation server .This file can be xls,tab or space deliminatior ettxt fiel.
I think this was your requirement.
Pooja

Function module for getting the text.

Hi ,
Is there any funcion module to get the message text if i pass the message no and message class as the exporting parameter.
Useful answers will be rewarded.
Regards,
neslin.

hi...
use this one
BAPI_MESSAGE_GETDETAIL
ok and following are for display
LMON_MESSAGE_DISPLAY
LTIF_MESSAGE_DISPLAY
reward..points

Using TabbedTextOut function to output text, the text will be truncated

Similar Messages

Maybe you are looking for