Using tabular form wizard

I created a tabular form using the Tabular Form Wizard. It works fine. Then, I added a region to this. The source of the region is an SQL Query. For some reason the new region does not display on the page when the page is run.
However, when I create the same region with the same SQL source on another page, it displays fine.
Why would this be?
Thanks.

"420716"
Are you sure you created the SQL query region on the same page? Check the page definition to see if it's actually there. How did you go about doing this, where did you click, etc? If you have this running on htmldb.oracle.com and give us the details, we can have a look.
Sergio

Similar Messages

Creating a test using the form wizard

I need to create a multipart test that will be used for editors applying for jobs. Part of the test will be a multiple choice spelling test, with 20 questions. I created the file in Word and am trying to use the form wizard to create check box fields. It looks like this:
1.
initative
intiative
initiative
enitiative
I want the blanks to the left of each word to be a check box field or a radio button.
When I created the pdf form and saved it, I found that when I checked any one of the boxes, all four check box fields were automatically filled in. I know I'm doing something wrong, but can't figure out what.
Do these forms have to be created in one session? Or can I save the form, close it and then contune editing the form fields later?
I am using Acrobat Pro 9.5
Any advice anyone can provide would be appreciated.
Thanks.
dg

I have gotten the hang of creating check boxes and radio buttons so that they behave the way I need them to behave. Thanks for the help on that.
I create these tests 2X per year and each test is to be used at least 500 times.
Here's my next apparent dilemma: I am creating this test in Acrobat Pro 9.5. The test takers are in three different cities in India. They use Reader X.
When I "distributed" a test of the only section I have completed to myself I discovered all of the distribution mechanisms (saving to a network folder, distributing via email, etc.). All of these options are far too complicated for my users.
Isn't there a way to create a form in Pro 9.5 that can just be saved with Reader X enabled so that anyone who opens the file in Reader X can just "save as" and have their filled-in data saved? I must emphasize that the saving process must be as simple as possible.
I need to keep this as simple as possible because I distribute these tests once and they are used over and over and the completed tests are collected by HR people who are not tech savvy at all. They are emailed to me from the three diffferent locations.
Previously I used Word but frankly there were two many ways people could cheat: That's why I want to switch to Acrobat forms. But this is looking like it's not going to work.
Perhaps I am missing something?
dg

Create Tabular Form wizard - how to add rows to Table / View Owner list?

Create Tabular Form wizard asks to choose "Table / View Owner"
How to add additional schemas/users to this "Table / View Owner" dropdown list?

Next step:
I tried to create 2nd application - and it sees and allows to select from schemas I added in previous step.
Then I tried to add 1 more schema - and 2nd application can't see it...
I create 3rd application and select 1st schema (assigned when workspace was created) - and it sees only this one schema
I create 4th application and select another schema (added in previous steps) - and it sees 2 schemas from 4 assigned
what is this?
how to live with it?

Cannot use dynamic form wizard

Can anyone tell me how to fix this? The file will not update and images will not load.
Fatal error: Cannot instantiate non-existent class: kt_fileupload in /var/www/vhosts/xxxxx/httpdocs/includes/tng/triggers/tNG_FileUpload.class.php on line 182

Thanks a million. I don't know how it is that all files didn't get loaded but that was the issue.
Jedi
Date: Mon, 2 May 2011 22:48:00 -0600
From: [email protected]
To: [email protected]
Subject: Cannot use dynamic form wizard
You may not have the full set of ADDT files uploaded to your server. Make sure that you have uploaded /includes/common/lib/file_upload directory and the 2 files it should contain: KT_FileUpload.class.php and KT_FileUpload.php.
Hope that helps.
>

Modify Tabular Form---wizard

Hi all,
Is there any chance to modify tabular form which created through wizard?
I want to add check box and radio button into it.
Thanks in Advance.
Regards,
Digisha

Hi
Can u pls refer this link might be useful
how to add radio button in tabular form.
regards
srikkanth.M

Using dynamic form wizard dont allow decimals

using the dynamic form wizard converts a given number using decimals in integer !!
example : if i use a text field ( in a form generated with the wizard) that will input a number with decimals : 123.44, the form sends 12344 to the db.
i´m using an access db (2003) and the numeric fields are declarated as number type
any ideas to solve this?
tanx

The problem is the same when using the Insert Record Form Wizard. I've made all the fields mandatory, but the file field still doesn't look like it has the content of the form passed through to the database. I've recreated the page, and double checked that the correct links are being made between the form inputs and the database fields, but still get the following:
]Error:
]SQL error: Field 'eventDoc.eventDocFile' cannot be a zero-length string..
]Developer Details:
]SQL error: INSERT INTO eventDoc (eventDocEvent, eventDocFile, eventDocText, eventDocTextWelsh) VALUES (32, '', 'Test file to check insert behaviour', 'Test file to check insert behaviour (Welsh)'). (SQL_ERROR)
tNG Execution Trace - VIEW
* tNG_insert.executeTransaction
o STARTER.Trigger_Default_Starter
o tNG_insert.doTransaction
+ BEFORE.Trigger_Default_FormValidation
+ tNG_insert.prepareSQL
+ tNG_insert.executeTransaction - execute sql* (THIS LINE IN RED)
+ ERROR.Trigger_Default_Insert_RollBack
* tNG_insert.getRecordset
* tNG_insert.getFakeRsArr
* tNG_insert.getLocalRecordset
* tNG_insert.getFakeRecordset
* tNG_insert.getFakeRecordset
I've also tested on both my local development server and the hosting server now, and have the same problem on both. It also happens if I just create the form, but don't apply the file upload behaviour - so it seems like it might be a problem with the supplied behaviours and how they handle the content of file inputs from forms.
I've only used the file upload in PHP before, where it seemed to work quite happily.

Dynamic action on LOV using tabular form

Hello,
I realize this has likely been dealt with somewhere already, but I'm going to ask anyway.
I have a master/detail form. The detail form has an option to add rows. I have created a dynamic action as defined below...
True Action:
Sequence: 10
Action: Javascript Expression
Fire On Page Load: No
Code: $(this.triggeringElement ).val()
Sequence: 20
Action: SQL Statement
Fire On Page Load: No
Code: select travel_status from territories_summary_v where territory_code=:P3_FIND_COUNTRY_CODE and language='US';
Sequence: 30
Action: Javascript Expression
Fire On Page Load: No
Code: $(this.triggeringElement).closest("tr").find("td[headers='TRAVEL_STATUS_CODE'] input").val($v('P3_FIND_COLOR'));
The P3_FIND_COLOR and P3_FIND_COUNTRY_CODE are defined as hidden fields.
This DA seems to partially work. It will update the travel status code with the proper value for each line. I can see it on screen. But when I apply changes it doesn't save this particular value to the database. If I physically go to the field and type something in, it will save this field. All other values save ok... just not this column .. regardless of the number of detail lines.
Further to this, when I add a row and a new blank row appears, if I change the country, the DA does not fire at all. I've put an alert in on sequence 10 and the alert will fire for a pre-existing row in the table... but not a new row. I would have thought that because it's an onChange DA associated with the country code, it would work for each new row regardless of how many rows are added or whether its a new row vs existing row.
So the first issue is why it won't save the data that is populated in travel status code when I can clearly see it there? Secondly, why this DA is not firing when I add a new row?
If anyone can help me it would be appreciated. I've done a lot of searches but have not come up with much where these issues are concerned.

There is no way to make a good guess on this without an example. It is hard to say what the reason could be.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.apress.com/9781430235125
https://apex.oracle.com/pls/apex/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
-------------------------------------------------------------------

Creating tabular form using SQL query

Hi,
I need to create a tabular form using an SQL query so that multiple rows of a table are displayed on screen and are editable to the user.
I have created this sort of form before using the Tabular Form wizard however for this form I need to enter SQL to produce it.
The steps I take are:
1. Create Page
2. Page with Component
3. Form
4. Fow on a SQL query
5. For the query I have: 'select * from depot_master_customer'
However when I view the page, it just displays one blank field with the title '*' !!
I am doing something completely wrong here? It seems like it should be a simple thing to do.
Any help appreciated, this one is driving me mad.
Thanks
Simon

Simon,
You will need to manually create the tabular form and DML process. This is covered in detail in the How To document shown below:
http://www.oracle.com/technology/products/database/htmldb/howtos/tabular_form.html
Have you tried this yet?
Good luck!
Emilio.

Revising forms previously created using Form Wizard

I have a form that I previously created in Word, converted to pdf and then used the Form Wizard to add the form fields.
I now need to revise the form in Word. Is there an easy way to copy
the form fields previously used into the new version without having to go through the whole creating form fields process again? The option for Replace Page
s is greyed out so I can't use it like I can with other pdf's.

Normally you would replace the old pages with the new and any fields would not be affected. The fact that it's greyed out could be due to security setting or if the form has been distributed or otherwise Reader-enabled. You should always save a copy of the form before you apply security or distribute (or Reader-enable) the document so you can make changes like this.

Column in tabular form non-editable on update but editable on insert?

I've got a tabular form and one of the columns should be editable when one chooses insert new row but once the row is created the column should not be editable.
So I want a textfield when creating a new row and a standard report column for the rows already in the table.
Can this be done?
I really need to keep this simple (developmentwise) so it need to be done within apex's tabular form "wizard"...
Thanks in advance
Andreas

This is an alteranative way to do the same
This code has been tested by me in Apex 4.1.1
Step 1 --> Create a Java Script and add it to the JavaScript --> Function and Global Variable Section
One Can get the name by using Right Clicking on the PK field in Chrome and Selecting Inspect Element
function ro()
    var pk_id = document.getElementsByName("f02");
    for (var i=0;i<pk_id.length;i++)
      if(pk_id[i].value!="")
           pk_id[i].readOnly = "readonly";
Step 2 --> Create a Dynamic Action
Select Advanced
Select the Event --> Framework Events -->After Refresh --> Region --> Select Your Tabular form Region
Condition --> No Condition
True Action --> Execute JavaScript Code
In the Code box type javascript:ro()
The box will only make the Existing Rows RO, When one presses the AddRow as the region is not refreshed the user is able to add new data in the text field.
Works with Delete and Cancel as well.

Add row button is not working in manual tabular form

Hi,
I have created a tabular form by using collections. In the same page there is a wizard tabular form also.
Here my problem is whenever i giving request to the add row button its showing nothing. there is no any new row got added.
IF :REQUEST ='ADD'
THEN
apex_collection.add_member(
p_collection_name => l_collection_name
END IF;
END;
Thanks.

Hi,
Thanks for ur reply.
My problem got solved after deleting the tabular form wizard from the page then add row button is working.
But i think its not the solution.
Thanks.

How to assign values to columns in a tabular form

hello,
my tabular form allows insert on a table.
some of the fiels in that table are not null and are hidden from the user.
before submitting a new row the hidden columns needs to get their values
from a database function.
is there a way to do it in a tabular form? and how?
Thanks,
Iris.

HI,
depends you can use a bunch of different approach, however if you want to use tabular forms note that if you change the qry on wich is based the tforms usually you get an error (if you read around the forum this is because the MULTI PROCESS ROW is built on a table the time you use the wizard).
If you need this function to 'work' with null value go to
Tabular Form Element
--> pl/sql expression or function and call your function in the db.
Under my opinion if you want to have more control build a tabular form of yours and write your DELETE / UPDATE / INSERT statement and build your tabular form / report using the APEX_ITEM synthax.
You can use as well a checkbox and loop to build your multirow process (that conditionally process the checked item).
And if you have a common rules for a specific table i suggest you to manage these rules directly on the that table using triggers.
hope it helps

Error creating tabular form

When I use the Create Page > Tabular Form wizard to create a form based on a table with a zero in the name, I receive this error:
ORA-20001: Unable to create updateable report. ORA-20001: ParseErr: ORA-00904: "T11_ACCOUNT": invalid identifier
Here is my table layout:
SQL> desc a200t011
Name Null? Type
T011_ACCOUNT VARCHAR2(10)
T011_AREA VARCHAR2(3)
T011_ACCOUNT_NAME VARCHAR2(40)
T011_GRANT_BEGIN DATE
T011_GRANT_END DATE
T011_DEPARTMENT VARCHAR2(8)
T011_STATUS VARCHAR2(1)
T011_TYPE VARCHAR2(1)
Looks like HTMLDB is removing the zeros?

Billy,
I've confirmed this behavior but I cannot explain why it is happening. So for now, it'a a bug.
Scott

How to build a tabular form with a by the user insertable primary key

I have build a build a tabular form with the wizzard. Wat should I do to make the primary key insertable by the user.
When I change the PK from 'hidden' to 'text field', I get a checksum error when i am trying to insert.

Fred: When you use the tabular form wizard, notice the help text on the right hand side of each page. The help page where you define the type of primary key (Existing trigger, PL/SQL function, existing sequence) clearly states
Tabular forms do not support user entered primary key values
Makes sense when you think about it. The MRU process needs to determine whether to update a record or insert a new record. It does that by comparing the checksums (and/or) pk values from when the page was first rendered and then when you make changes and submit it. Newly inserted rows will have a blank PK/checksum.
If you allow user to change the PK, how will the system know which rows are new and which ones are old?
For example, lets say you have
create table t
pk int primary key,
data varchar2(10)
)You have 2 rows
1 red
2 yellow
If the PK were to be editable, user could go in and change the above to
2 red
1 yellow
Now what? Would you like the system to create a new row with 1/yellow or change the existing pk=1 row to yellow? Same with the other row.
Bottom line: The built-in processes dont support this. You can always write your own manual tabular form and implement whatever you logic you wish in your After Submit processes.
Hope this helps.

Add Row on Tabular Form - column from read only to update/insert allowed

APEX 4.2.2
Newbie in the APEX forums, go easy please.
I'm building a rather simple tabular form based on a table with a primary key (emp_number). Sounds like an Oracle tutorial but trust me, it's a real table. This table has, for this example's sake the following attributes:
Table Name: EMP_EXCEPTIONS
EMP_NUMBER NUMBER (PK)
UPDATE_EXEMPT VARCHAR2(1)
I've used the Tabular Form wizard to create a nice looking tabular form page, all good and works as intended. Of course the primary key value is non update able by the wizard and that's by design - I've no need to update any primary keys. When I click the add rows button however, I'd like to be able to include the emp_number field as a input able field. At the moment, when I click the add rows button it inherits the property of the emp_number as read only. The user entering the new row would know the employee number and whether they were update_exempt or not. So rewinding my head in Oracle Forms, this would have been done by setting the row attribute as update allowed when the button is clicked. Is there such simple functionality in APEX and if so can you point me in the right direction?

It seems to be true:
- if there is ascending order on columns which fields are null in new line (have no default value), new row is visible in current "pagination" page
- but if there is DEScending order OR ANY sort order is set on columns which fields are NOT null in new line (have default value), new row is NOT visible in current "pagination" page
thank you!

Using tabular form wizard

Similar Messages

Maybe you are looking for